QEMU-Devel Archive on lore.kernel.org
 help / color / Atom feed
From: Max Reitz <mreitz@redhat.com>
To: qemu-block@nongnu.org
Cc: Kevin Wolf <kwolf@redhat.com>,
	Peter Maydell <peter.maydell@linaro.org>,
	qemu-devel@nongnu.org, Max Reitz <mreitz@redhat.com>
Subject: [PULL 10/10] iotests/138: Test leaks/corruptions fixed report
Date: Thu, 26 Mar 2020 15:29:33 +0100
Message-ID: <20200326142933.625037-11-mreitz@redhat.com> (raw)
In-Reply-To: <20200326142933.625037-1-mreitz@redhat.com>

Test that qemu-img check reports the number of leaks and corruptions
fixed in its JSON report (after a successful run).

While touching the _unsupported_imgopts line, adjust the note on why
data_file does not work with this test: The current comment sounds a bit
like it is a mistake for qemu-img check not to check external data
files' refcounts.  But there are no such refcounts, so it is no mistake.
Just say that qemu-img check does not do much for external data files,
and this is why this test does not work with them.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200324172757.1173824-4-mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
---
 tests/qemu-iotests/138     | 41 ++++++++++++++++++++++++++++++++++++--
 tests/qemu-iotests/138.out | 14 +++++++++++++
 2 files changed, 53 insertions(+), 2 deletions(-)

diff --git a/tests/qemu-iotests/138 b/tests/qemu-iotests/138
index 54b01046ad..1d5b0bed6d 100755
--- a/tests/qemu-iotests/138
+++ b/tests/qemu-iotests/138
@@ -41,8 +41,10 @@ _supported_fmt qcow2
 _supported_proto file
 _supported_os Linux
 # With an external data file, data clusters are not refcounted
-# (and so qemu-img check does not check their refcount)
-_unsupported_imgopts data_file
+# (so qemu-img check would not do much);
+# we want to modify the refcounts, so we need them to have a specific
+# format (namely u16)
+_unsupported_imgopts data_file 'refcount_bits=\([^1]\|.\([^6]\|$\)\)'
 
 echo
 echo '=== Check on an image with a multiple of 2^32 clusters ==='
@@ -65,6 +67,41 @@ poke_file "$TEST_IMG" $((2048 + 8)) "\x00\x80\x00\x00\x00\x00\x00\x00"
 # allocate memory", we have an error showing that l2 entry is invalid.
 _check_test_img
 
+echo
+echo '=== Check leaks-fixed/corruptions-fixed report'
+echo
+
+# After leaks and corruptions were fixed, those numbers should be
+# reported by qemu-img check
+_make_test_img 64k
+
+# Allocate data cluster
+$QEMU_IO -c 'write 0 64k' "$TEST_IMG" | _filter_qemu_io
+
+reftable_ofs=$(peek_file_be "$TEST_IMG" 48 8)
+refblock_ofs=$(peek_file_be "$TEST_IMG" $reftable_ofs 8)
+
+# Introduce a leak: Make the image header's refcount 2
+poke_file_be "$TEST_IMG" "$refblock_ofs" 2 2
+
+l1_ofs=$(peek_file_be "$TEST_IMG" 40 8)
+
+# Introduce a corruption: Drop the COPIED flag from the (first) L1 entry
+l1_entry=$(peek_file_be "$TEST_IMG" $l1_ofs 8)
+l1_entry=$((l1_entry & ~(1 << 63)))
+poke_file_be "$TEST_IMG" $l1_ofs 8 $l1_entry
+
+echo
+# Should print the number of corruptions and leaks fixed
+# (Filter out all JSON fields (recognizable by their four-space
+# indentation), but keep the "-fixed" fields (by removing two spaces
+# from their indentation))
+# (Also filter out the L1 entry, because why not)
+_check_test_img -r all --output=json \
+    | sed -e 's/^  \(.*\)-fixed"/\1-fixed"/' \
+          -e '/^    /d' \
+          -e "s/\\([^0-9a-f]\\)$(printf %x $l1_entry)\\([^0-9a-f]\\)/\1L1_ENTRY_VALUE\2/"
+
 # success, all done
 echo "*** done"
 rm -f $seq.full
diff --git a/tests/qemu-iotests/138.out b/tests/qemu-iotests/138.out
index aca7d47a80..79681e7cc9 100644
--- a/tests/qemu-iotests/138.out
+++ b/tests/qemu-iotests/138.out
@@ -9,4 +9,18 @@ ERROR: counting reference for region exceeding the end of the file by one cluste
 
 1 errors were found on the image.
 Data may be corrupted, or further writes to the image may corrupt it.
+
+=== Check leaks-fixed/corruptions-fixed report
+
+Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=65536
+wrote 65536/65536 bytes at offset 0
+64 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+Leaked cluster 0 refcount=2 reference=1
+Repairing cluster 0 refcount=2 reference=1
+Repairing OFLAG_COPIED L2 cluster: l1_index=0 l1_entry=L1_ENTRY_VALUE refcount=1
+{
+  "corruptions-fixed": 1,
+  "leaks-fixed": 1,
+}
 *** done
-- 
2.25.1



  parent reply index

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-03-26 14:29 [PULL 00/10] Block patches for 5.0-rc1 Max Reitz
2020-03-26 14:29 ` [PULL 01/10] block/mirror: fix use after free of local_err Max Reitz
2020-03-26 14:29 ` [PULL 02/10] block: pass BlockDriver reference to the .bdrv_co_create Max Reitz
2020-03-26 14:29 ` [PULL 03/10] block: trickle down the fallback image creation function use to the block drivers Max Reitz
2020-03-26 14:29 ` [PULL 04/10] qcow2: Comment typo fixes Max Reitz
2020-03-26 14:29 ` [PULL 05/10] qcow2: List autoclear bit names in header Max Reitz
2020-03-26 14:29 ` [PULL 06/10] qcow2: Avoid feature name extension on small cluster size Max Reitz
2020-03-26 14:29 ` [PULL 07/10] sheepdog: Consistently set bdrv_has_zero_init_truncate Max Reitz
2020-03-26 14:29 ` [PULL 08/10] qemu-img: Fix check's leak/corruption fix report Max Reitz
2020-03-26 14:29 ` [PULL 09/10] iotests: Add poke_file_[bl]e functions Max Reitz
2020-03-26 14:29 ` Max Reitz [this message]
2020-03-26 16:54 ` [PULL 00/10] Block patches for 5.0-rc1 Peter Maydell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200326142933.625037-11-mreitz@redhat.com \
    --to=mreitz@redhat.com \
    --cc=kwolf@redhat.com \
    --cc=peter.maydell@linaro.org \
    --cc=qemu-block@nongnu.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

QEMU-Devel Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/qemu-devel/0 qemu-devel/git/0.git
	git clone --mirror https://lore.kernel.org/qemu-devel/1 qemu-devel/git/1.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 qemu-devel qemu-devel/ https://lore.kernel.org/qemu-devel \
		qemu-devel@nongnu.org
	public-inbox-index qemu-devel

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.nongnu.qemu-devel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git