* [PULL 01/31] dma/xlnx-zdma: Fix descriptor loading (MEM) wrt endianness
2020-04-30 11:51 [PULL 00/31] target-arm queue Peter Maydell
@ 2020-04-30 11:51 ` Peter Maydell
2020-04-30 11:51 ` [PULL 02/31] dma/xlnx-zdma: Fix descriptor loading (REG) " Peter Maydell
` (30 subsequent siblings)
31 siblings, 0 replies; 40+ messages in thread
From: Peter Maydell @ 2020-04-30 11:51 UTC (permalink / raw)
To: qemu-devel
From: "Edgar E. Iglesias" <edgar.iglesias@xilinx.com>
Fix descriptor loading from memory wrt host endianness.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200404122718.25111-2-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
hw/dma/xlnx-zdma.c | 11 +++++++----
1 file changed, 7 insertions(+), 4 deletions(-)
diff --git a/hw/dma/xlnx-zdma.c b/hw/dma/xlnx-zdma.c
index 1c45367f3c6..5f4775f6634 100644
--- a/hw/dma/xlnx-zdma.c
+++ b/hw/dma/xlnx-zdma.c
@@ -299,19 +299,22 @@ static void zdma_put_regaddr64(XlnxZDMA *s, unsigned int basereg, uint64_t addr)
s->regs[basereg + 1] = addr >> 32;
}
-static bool zdma_load_descriptor(XlnxZDMA *s, uint64_t addr, void *buf)
+static bool zdma_load_descriptor(XlnxZDMA *s, uint64_t addr,
+ XlnxZDMADescr *descr)
{
/* ZDMA descriptors must be aligned to their own size. */
if (addr % sizeof(XlnxZDMADescr)) {
qemu_log_mask(LOG_GUEST_ERROR,
"zdma: unaligned descriptor at %" PRIx64,
addr);
- memset(buf, 0x0, sizeof(XlnxZDMADescr));
+ memset(descr, 0x0, sizeof(XlnxZDMADescr));
s->error = true;
return false;
}
- address_space_read(s->dma_as, addr, s->attr, buf, sizeof(XlnxZDMADescr));
+ descr->addr = address_space_ldq_le(s->dma_as, addr, s->attr, NULL);
+ descr->size = address_space_ldl_le(s->dma_as, addr + 8, s->attr, NULL);
+ descr->attr = address_space_ldl_le(s->dma_as, addr + 12, s->attr, NULL);
return true;
}
@@ -344,7 +347,7 @@ static void zdma_update_descr_addr(XlnxZDMA *s, bool type,
} else {
addr = zdma_get_regaddr64(s, basereg);
addr += sizeof(s->dsc_dst);
- address_space_read(s->dma_as, addr, s->attr, (void *) &next, 8);
+ next = address_space_ldq_le(s->dma_as, addr, s->attr, NULL);
}
zdma_put_regaddr64(s, basereg, next);
--
2.20.1
^ permalink raw reply related [flat|nested] 40+ messages in thread* [PULL 02/31] dma/xlnx-zdma: Fix descriptor loading (REG) wrt endianness
2020-04-30 11:51 [PULL 00/31] target-arm queue Peter Maydell
2020-04-30 11:51 ` [PULL 01/31] dma/xlnx-zdma: Fix descriptor loading (MEM) wrt endianness Peter Maydell
@ 2020-04-30 11:51 ` Peter Maydell
2020-04-30 11:51 ` [PULL 03/31] nrf51: Fix last GPIO CNF address Peter Maydell
` (29 subsequent siblings)
31 siblings, 0 replies; 40+ messages in thread
From: Peter Maydell @ 2020-04-30 11:51 UTC (permalink / raw)
To: qemu-devel
From: "Edgar E. Iglesias" <edgar.iglesias@xilinx.com>
Fix descriptor loading from registers wrt host endianness.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Message-id: 20200404122718.25111-3-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
hw/dma/xlnx-zdma.c | 14 ++++++++++----
1 file changed, 10 insertions(+), 4 deletions(-)
diff --git a/hw/dma/xlnx-zdma.c b/hw/dma/xlnx-zdma.c
index 5f4775f6634..4121a1b489c 100644
--- a/hw/dma/xlnx-zdma.c
+++ b/hw/dma/xlnx-zdma.c
@@ -299,6 +299,14 @@ static void zdma_put_regaddr64(XlnxZDMA *s, unsigned int basereg, uint64_t addr)
s->regs[basereg + 1] = addr >> 32;
}
+static void zdma_load_descriptor_reg(XlnxZDMA *s, unsigned int reg,
+ XlnxZDMADescr *descr)
+{
+ descr->addr = zdma_get_regaddr64(s, reg);
+ descr->size = s->regs[reg + 2];
+ descr->attr = s->regs[reg + 3];
+}
+
static bool zdma_load_descriptor(XlnxZDMA *s, uint64_t addr,
XlnxZDMADescr *descr)
{
@@ -324,8 +332,7 @@ static void zdma_load_src_descriptor(XlnxZDMA *s)
unsigned int ptype = ARRAY_FIELD_EX32(s->regs, ZDMA_CH_CTRL0, POINT_TYPE);
if (ptype == PT_REG) {
- memcpy(&s->dsc_src, &s->regs[R_ZDMA_CH_SRC_DSCR_WORD0],
- sizeof(s->dsc_src));
+ zdma_load_descriptor_reg(s, R_ZDMA_CH_SRC_DSCR_WORD0, &s->dsc_src);
return;
}
@@ -360,8 +367,7 @@ static void zdma_load_dst_descriptor(XlnxZDMA *s)
bool dst_type;
if (ptype == PT_REG) {
- memcpy(&s->dsc_dst, &s->regs[R_ZDMA_CH_DST_DSCR_WORD0],
- sizeof(s->dsc_dst));
+ zdma_load_descriptor_reg(s, R_ZDMA_CH_DST_DSCR_WORD0, &s->dsc_dst);
return;
}
--
2.20.1
^ permalink raw reply related [flat|nested] 40+ messages in thread* [PULL 03/31] nrf51: Fix last GPIO CNF address
2020-04-30 11:51 [PULL 00/31] target-arm queue Peter Maydell
2020-04-30 11:51 ` [PULL 01/31] dma/xlnx-zdma: Fix descriptor loading (MEM) wrt endianness Peter Maydell
2020-04-30 11:51 ` [PULL 02/31] dma/xlnx-zdma: Fix descriptor loading (REG) " Peter Maydell
@ 2020-04-30 11:51 ` Peter Maydell
2020-04-30 11:51 ` [PULL 04/31] bugfix: Use gicr_typer in arm_gicv3_icc_reset Peter Maydell
` (28 subsequent siblings)
31 siblings, 0 replies; 40+ messages in thread
From: Peter Maydell @ 2020-04-30 11:51 UTC (permalink / raw)
To: qemu-devel
From: Cameron Esfahani <dirty@apple.com>
NRF51_GPIO_REG_CNF_END doesn't actually refer to the start of the last
valid CNF register: it's referring to the last byte of the last valid
CNF register.
This hasn't been a problem up to now, as current implementation in
memory.c turns an unaligned 4-byte read from 0x77f to a single byte read
and the qtest only looks at the least-significant byte of the register.
But when running with patches which fix unaligned accesses in memory.c,
the qtest breaks.
Considering NRF51 doesn't support unaligned accesses, the simplest fix
is to actually set NRF51_GPIO_REG_CNF_END to the start of the last valid
CNF register: 0x77c.
Now, qtests work with or without the unaligned access patches.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Cameron Esfahani <dirty@apple.com>
Message-id: 51b427f06838622da783d38ba56e3630d6d85c60.1586925392.git.dirty@apple.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
include/hw/gpio/nrf51_gpio.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/include/hw/gpio/nrf51_gpio.h b/include/hw/gpio/nrf51_gpio.h
index 337ee534bbc..1d62bbc9285 100644
--- a/include/hw/gpio/nrf51_gpio.h
+++ b/include/hw/gpio/nrf51_gpio.h
@@ -42,7 +42,7 @@
#define NRF51_GPIO_REG_DIRSET 0x518
#define NRF51_GPIO_REG_DIRCLR 0x51C
#define NRF51_GPIO_REG_CNF_START 0x700
-#define NRF51_GPIO_REG_CNF_END 0x77F
+#define NRF51_GPIO_REG_CNF_END 0x77C
#define NRF51_GPIO_PULLDOWN 1
#define NRF51_GPIO_PULLUP 3
--
2.20.1
^ permalink raw reply related [flat|nested] 40+ messages in thread* [PULL 04/31] bugfix: Use gicr_typer in arm_gicv3_icc_reset
2020-04-30 11:51 [PULL 00/31] target-arm queue Peter Maydell
` (2 preceding siblings ...)
2020-04-30 11:51 ` [PULL 03/31] nrf51: Fix last GPIO CNF address Peter Maydell
@ 2020-04-30 11:51 ` Peter Maydell
2020-04-30 11:51 ` [PULL 05/31] Typo: Correct the name of CPU hotplug memory region Peter Maydell
` (27 subsequent siblings)
31 siblings, 0 replies; 40+ messages in thread
From: Peter Maydell @ 2020-04-30 11:51 UTC (permalink / raw)
To: qemu-devel
From: Keqian Zhu <zhukeqian1@huawei.com>
The KVM_VGIC_ATTR macro expect the second parameter as gicr_typer,
of which high 32bit is constructed by mp_affinity. For most case,
the high 32bit of mp_affinity is zero, so it will always access the
ICC_CTLR_EL1 of CPU0.
Signed-off-by: Keqian Zhu <zhukeqian1@huawei.com>
Message-id: 20200413091552.62748-2-zhukeqian1@huawei.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
hw/intc/arm_gicv3_kvm.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/hw/intc/arm_gicv3_kvm.c b/hw/intc/arm_gicv3_kvm.c
index 49304ca589d..ca43bf87cab 100644
--- a/hw/intc/arm_gicv3_kvm.c
+++ b/hw/intc/arm_gicv3_kvm.c
@@ -658,13 +658,11 @@ static void kvm_arm_gicv3_get(GICv3State *s)
static void arm_gicv3_icc_reset(CPUARMState *env, const ARMCPRegInfo *ri)
{
- ARMCPU *cpu;
GICv3State *s;
GICv3CPUState *c;
c = (GICv3CPUState *)env->gicv3state;
s = c->gic;
- cpu = ARM_CPU(c->cpu);
c->icc_pmr_el1 = 0;
c->icc_bpr[GICV3_G0] = GIC_MIN_BPR;
@@ -681,7 +679,7 @@ static void arm_gicv3_icc_reset(CPUARMState *env, const ARMCPRegInfo *ri)
/* Initialize to actual HW supported configuration */
kvm_device_access(s->dev_fd, KVM_DEV_ARM_VGIC_GRP_CPU_SYSREGS,
- KVM_VGIC_ATTR(ICC_CTLR_EL1, cpu->mp_affinity),
+ KVM_VGIC_ATTR(ICC_CTLR_EL1, c->gicr_typer),
&c->icc_ctlr_el1[GICV3_NS], false, &error_abort);
c->icc_ctlr_el1[GICV3_S] = c->icc_ctlr_el1[GICV3_NS];
--
2.20.1
^ permalink raw reply related [flat|nested] 40+ messages in thread* [PULL 05/31] Typo: Correct the name of CPU hotplug memory region
2020-04-30 11:51 [PULL 00/31] target-arm queue Peter Maydell
` (3 preceding siblings ...)
2020-04-30 11:51 ` [PULL 04/31] bugfix: Use gicr_typer in arm_gicv3_icc_reset Peter Maydell
@ 2020-04-30 11:51 ` Peter Maydell
2020-04-30 11:51 ` [PULL 06/31] hw/net: Add Smartfusion2 emac block Peter Maydell
` (26 subsequent siblings)
31 siblings, 0 replies; 40+ messages in thread
From: Peter Maydell @ 2020-04-30 11:51 UTC (permalink / raw)
To: qemu-devel
From: Keqian Zhu <zhukeqian1@huawei.com>
Replace "acpi-mem-hotplug" with "acpi-cpu-hotplug"
Signed-off-by: Keqian Zhu <zhukeqian1@huawei.com>
Message-id: 20200413091552.62748-4-zhukeqian1@huawei.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
hw/acpi/cpu.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/hw/acpi/cpu.c b/hw/acpi/cpu.c
index e2c957ce008..3d6a500fb7e 100644
--- a/hw/acpi/cpu.c
+++ b/hw/acpi/cpu.c
@@ -222,7 +222,7 @@ void cpu_hotplug_hw_init(MemoryRegion *as, Object *owner,
state->devs[i].arch_id = id_list->cpus[i].arch_id;
}
memory_region_init_io(&state->ctrl_reg, owner, &cpu_hotplug_ops, state,
- "acpi-mem-hotplug", ACPI_CPU_HOTPLUG_REG_LEN);
+ "acpi-cpu-hotplug", ACPI_CPU_HOTPLUG_REG_LEN);
memory_region_add_subregion(as, base_addr, &state->ctrl_reg);
}
--
2.20.1
^ permalink raw reply related [flat|nested] 40+ messages in thread* [PULL 06/31] hw/net: Add Smartfusion2 emac block
2020-04-30 11:51 [PULL 00/31] target-arm queue Peter Maydell
` (4 preceding siblings ...)
2020-04-30 11:51 ` [PULL 05/31] Typo: Correct the name of CPU hotplug memory region Peter Maydell
@ 2020-04-30 11:51 ` Peter Maydell
2020-04-30 11:51 ` [PULL 07/31] msf2: Add EMAC block to SmartFusion2 SoC Peter Maydell
` (25 subsequent siblings)
31 siblings, 0 replies; 40+ messages in thread
From: Peter Maydell @ 2020-04-30 11:51 UTC (permalink / raw)
To: qemu-devel
From: Subbaraya Sundeep <sundeep.lkml@gmail.com>
Modelled Ethernet MAC of Smartfusion2 SoC.
Micrel KSZ8051 PHY is present on Emcraft's
SOM kit hence same PHY is emulated.
Signed-off-by: Subbaraya Sundeep <sundeep.lkml@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 1587048891-30493-2-git-send-email-sundeep.lkml@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
hw/net/Makefile.objs | 1 +
include/hw/net/msf2-emac.h | 53 ++++
hw/net/msf2-emac.c | 589 +++++++++++++++++++++++++++++++++++++
MAINTAINERS | 2 +
4 files changed, 645 insertions(+)
create mode 100644 include/hw/net/msf2-emac.h
create mode 100644 hw/net/msf2-emac.c
diff --git a/hw/net/Makefile.objs b/hw/net/Makefile.objs
index af4d1948666..f2b73983eec 100644
--- a/hw/net/Makefile.objs
+++ b/hw/net/Makefile.objs
@@ -55,3 +55,4 @@ common-obj-$(CONFIG_ROCKER) += rocker/rocker.o rocker/rocker_fp.o \
obj-$(call lnot,$(CONFIG_ROCKER)) += rocker/qmp-norocker.o
common-obj-$(CONFIG_CAN_BUS) += can/
+common-obj-$(CONFIG_MSF2) += msf2-emac.o
diff --git a/include/hw/net/msf2-emac.h b/include/hw/net/msf2-emac.h
new file mode 100644
index 00000000000..37966d3a813
--- /dev/null
+++ b/include/hw/net/msf2-emac.h
@@ -0,0 +1,53 @@
+/*
+ * QEMU model of the Smartfusion2 Ethernet MAC.
+ *
+ * Copyright (c) 2020 Subbaraya Sundeep <sundeep.lkml@gmail.com>.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "hw/sysbus.h"
+#include "exec/memory.h"
+#include "net/net.h"
+#include "net/eth.h"
+
+#define TYPE_MSS_EMAC "msf2-emac"
+#define MSS_EMAC(obj) \
+ OBJECT_CHECK(MSF2EmacState, (obj), TYPE_MSS_EMAC)
+
+#define R_MAX (0x1a0 / 4)
+#define PHY_MAX_REGS 32
+
+typedef struct MSF2EmacState {
+ SysBusDevice parent;
+
+ MemoryRegion mmio;
+ MemoryRegion *dma_mr;
+ AddressSpace dma_as;
+
+ qemu_irq irq;
+ NICState *nic;
+ NICConf conf;
+
+ uint8_t mac_addr[ETH_ALEN];
+ uint32_t rx_desc;
+ uint16_t phy_regs[PHY_MAX_REGS];
+
+ uint32_t regs[R_MAX];
+} MSF2EmacState;
diff --git a/hw/net/msf2-emac.c b/hw/net/msf2-emac.c
new file mode 100644
index 00000000000..32ba9e84124
--- /dev/null
+++ b/hw/net/msf2-emac.c
@@ -0,0 +1,589 @@
+/*
+ * QEMU model of the Smartfusion2 Ethernet MAC.
+ *
+ * Copyright (c) 2020 Subbaraya Sundeep <sundeep.lkml@gmail.com>.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ * Refer to section Ethernet MAC in the document:
+ * UG0331: SmartFusion2 Microcontroller Subsystem User Guide
+ * Datasheet URL:
+ * https://www.microsemi.com/document-portal/cat_view/56661-internal-documents/
+ * 56758-soc?lang=en&limit=20&limitstart=220
+ */
+
+#include "qemu/osdep.h"
+#include "qemu-common.h"
+#include "qemu/log.h"
+#include "qapi/error.h"
+#include "exec/address-spaces.h"
+#include "hw/registerfields.h"
+#include "hw/net/msf2-emac.h"
+#include "hw/net/mii.h"
+#include "hw/irq.h"
+#include "hw/qdev-properties.h"
+#include "migration/vmstate.h"
+
+REG32(CFG1, 0x0)
+ FIELD(CFG1, RESET, 31, 1)
+ FIELD(CFG1, RX_EN, 2, 1)
+ FIELD(CFG1, TX_EN, 0, 1)
+ FIELD(CFG1, LB_EN, 8, 1)
+REG32(CFG2, 0x4)
+REG32(IFG, 0x8)
+REG32(HALF_DUPLEX, 0xc)
+REG32(MAX_FRAME_LENGTH, 0x10)
+REG32(MII_CMD, 0x24)
+ FIELD(MII_CMD, READ, 0, 1)
+REG32(MII_ADDR, 0x28)
+ FIELD(MII_ADDR, REGADDR, 0, 5)
+ FIELD(MII_ADDR, PHYADDR, 8, 5)
+REG32(MII_CTL, 0x2c)
+REG32(MII_STS, 0x30)
+REG32(STA1, 0x40)
+REG32(STA2, 0x44)
+REG32(FIFO_CFG0, 0x48)
+REG32(FIFO_CFG4, 0x58)
+ FIELD(FIFO_CFG4, BCAST, 9, 1)
+ FIELD(FIFO_CFG4, MCAST, 8, 1)
+REG32(FIFO_CFG5, 0x5C)
+ FIELD(FIFO_CFG5, BCAST, 9, 1)
+ FIELD(FIFO_CFG5, MCAST, 8, 1)
+REG32(DMA_TX_CTL, 0x180)
+ FIELD(DMA_TX_CTL, EN, 0, 1)
+REG32(DMA_TX_DESC, 0x184)
+REG32(DMA_TX_STATUS, 0x188)
+ FIELD(DMA_TX_STATUS, PKTCNT, 16, 8)
+ FIELD(DMA_TX_STATUS, UNDERRUN, 1, 1)
+ FIELD(DMA_TX_STATUS, PKT_SENT, 0, 1)
+REG32(DMA_RX_CTL, 0x18c)
+ FIELD(DMA_RX_CTL, EN, 0, 1)
+REG32(DMA_RX_DESC, 0x190)
+REG32(DMA_RX_STATUS, 0x194)
+ FIELD(DMA_RX_STATUS, PKTCNT, 16, 8)
+ FIELD(DMA_RX_STATUS, OVERFLOW, 2, 1)
+ FIELD(DMA_RX_STATUS, PKT_RCVD, 0, 1)
+REG32(DMA_IRQ_MASK, 0x198)
+REG32(DMA_IRQ, 0x19c)
+
+#define EMPTY_MASK (1 << 31)
+#define PKT_SIZE 0x7FF
+#define PHYADDR 0x1
+#define MAX_PKT_SIZE 2048
+
+typedef struct {
+ uint32_t pktaddr;
+ uint32_t pktsize;
+ uint32_t next;
+} EmacDesc;
+
+static uint32_t emac_get_isr(MSF2EmacState *s)
+{
+ uint32_t ier = s->regs[R_DMA_IRQ_MASK];
+ uint32_t tx = s->regs[R_DMA_TX_STATUS] & 0xF;
+ uint32_t rx = s->regs[R_DMA_RX_STATUS] & 0xF;
+ uint32_t isr = (rx << 4) | tx;
+
+ s->regs[R_DMA_IRQ] = ier & isr;
+ return s->regs[R_DMA_IRQ];
+}
+
+static void emac_update_irq(MSF2EmacState *s)
+{
+ bool intr = emac_get_isr(s);
+
+ qemu_set_irq(s->irq, intr);
+}
+
+static void emac_load_desc(MSF2EmacState *s, EmacDesc *d, hwaddr desc)
+{
+ address_space_read(&s->dma_as, desc, MEMTXATTRS_UNSPECIFIED, d, sizeof *d);
+ /* Convert from LE into host endianness. */
+ d->pktaddr = le32_to_cpu(d->pktaddr);
+ d->pktsize = le32_to_cpu(d->pktsize);
+ d->next = le32_to_cpu(d->next);
+}
+
+static void emac_store_desc(MSF2EmacState *s, EmacDesc *d, hwaddr desc)
+{
+ /* Convert from host endianness into LE. */
+ d->pktaddr = cpu_to_le32(d->pktaddr);
+ d->pktsize = cpu_to_le32(d->pktsize);
+ d->next = cpu_to_le32(d->next);
+
+ address_space_write(&s->dma_as, desc, MEMTXATTRS_UNSPECIFIED, d, sizeof *d);
+}
+
+static void msf2_dma_tx(MSF2EmacState *s)
+{
+ NetClientState *nc = qemu_get_queue(s->nic);
+ hwaddr desc = s->regs[R_DMA_TX_DESC];
+ uint8_t buf[MAX_PKT_SIZE];
+ EmacDesc d;
+ int size;
+ uint8_t pktcnt;
+ uint32_t status;
+
+ if (!(s->regs[R_CFG1] & R_CFG1_TX_EN_MASK)) {
+ return;
+ }
+
+ while (1) {
+ emac_load_desc(s, &d, desc);
+ if (d.pktsize & EMPTY_MASK) {
+ break;
+ }
+ size = d.pktsize & PKT_SIZE;
+ address_space_read(&s->dma_as, d.pktaddr, MEMTXATTRS_UNSPECIFIED,
+ buf, size);
+ /*
+ * This is very basic way to send packets. Ideally there should be
+ * a FIFO and packets should be sent out from FIFO only when
+ * R_CFG1 bit 0 is set.
+ */
+ if (s->regs[R_CFG1] & R_CFG1_LB_EN_MASK) {
+ nc->info->receive(nc, buf, size);
+ } else {
+ qemu_send_packet(nc, buf, size);
+ }
+ d.pktsize |= EMPTY_MASK;
+ emac_store_desc(s, &d, desc);
+ /* update sent packets count */
+ status = s->regs[R_DMA_TX_STATUS];
+ pktcnt = FIELD_EX32(status, DMA_TX_STATUS, PKTCNT);
+ pktcnt++;
+ s->regs[R_DMA_TX_STATUS] = FIELD_DP32(status, DMA_TX_STATUS,
+ PKTCNT, pktcnt);
+ s->regs[R_DMA_TX_STATUS] |= R_DMA_TX_STATUS_PKT_SENT_MASK;
+ desc = d.next;
+ }
+ s->regs[R_DMA_TX_STATUS] |= R_DMA_TX_STATUS_UNDERRUN_MASK;
+ s->regs[R_DMA_TX_CTL] &= ~R_DMA_TX_CTL_EN_MASK;
+}
+
+static void msf2_phy_update_link(MSF2EmacState *s)
+{
+ /* Autonegotiation status mirrors link status. */
+ if (qemu_get_queue(s->nic)->link_down) {
+ s->phy_regs[MII_BMSR] &= ~(MII_BMSR_AN_COMP |
+ MII_BMSR_LINK_ST);
+ } else {
+ s->phy_regs[MII_BMSR] |= (MII_BMSR_AN_COMP |
+ MII_BMSR_LINK_ST);
+ }
+}
+
+static void msf2_phy_reset(MSF2EmacState *s)
+{
+ memset(&s->phy_regs[0], 0, sizeof(s->phy_regs));
+ s->phy_regs[MII_BMCR] = 0x1140;
+ s->phy_regs[MII_BMSR] = 0x7968;
+ s->phy_regs[MII_PHYID1] = 0x0022;
+ s->phy_regs[MII_PHYID2] = 0x1550;
+ s->phy_regs[MII_ANAR] = 0x01E1;
+ s->phy_regs[MII_ANLPAR] = 0xCDE1;
+
+ msf2_phy_update_link(s);
+}
+
+static void write_to_phy(MSF2EmacState *s)
+{
+ uint8_t reg_addr = s->regs[R_MII_ADDR] & R_MII_ADDR_REGADDR_MASK;
+ uint8_t phy_addr = (s->regs[R_MII_ADDR] >> R_MII_ADDR_PHYADDR_SHIFT) &
+ R_MII_ADDR_REGADDR_MASK;
+ uint16_t data = s->regs[R_MII_CTL] & 0xFFFF;
+
+ if (phy_addr != PHYADDR) {
+ return;
+ }
+
+ switch (reg_addr) {
+ case MII_BMCR:
+ if (data & MII_BMCR_RESET) {
+ /* Phy reset */
+ msf2_phy_reset(s);
+ data &= ~MII_BMCR_RESET;
+ }
+ if (data & MII_BMCR_AUTOEN) {
+ /* Complete autonegotiation immediately */
+ data &= ~MII_BMCR_AUTOEN;
+ s->phy_regs[MII_BMSR] |= MII_BMSR_AN_COMP;
+ }
+ break;
+ }
+
+ s->phy_regs[reg_addr] = data;
+}
+
+static uint16_t read_from_phy(MSF2EmacState *s)
+{
+ uint8_t reg_addr = s->regs[R_MII_ADDR] & R_MII_ADDR_REGADDR_MASK;
+ uint8_t phy_addr = (s->regs[R_MII_ADDR] >> R_MII_ADDR_PHYADDR_SHIFT) &
+ R_MII_ADDR_REGADDR_MASK;
+
+ if (phy_addr == PHYADDR) {
+ return s->phy_regs[reg_addr];
+ } else {
+ return 0xFFFF;
+ }
+}
+
+static void msf2_emac_do_reset(MSF2EmacState *s)
+{
+ memset(&s->regs[0], 0, sizeof(s->regs));
+ s->regs[R_CFG1] = 0x80000000;
+ s->regs[R_CFG2] = 0x00007000;
+ s->regs[R_IFG] = 0x40605060;
+ s->regs[R_HALF_DUPLEX] = 0x00A1F037;
+ s->regs[R_MAX_FRAME_LENGTH] = 0x00000600;
+ s->regs[R_FIFO_CFG5] = 0X3FFFF;
+
+ msf2_phy_reset(s);
+}
+
+static uint64_t emac_read(void *opaque, hwaddr addr, unsigned int size)
+{
+ MSF2EmacState *s = opaque;
+ uint32_t r = 0;
+
+ addr >>= 2;
+
+ switch (addr) {
+ case R_DMA_IRQ:
+ r = emac_get_isr(s);
+ break;
+ default:
+ if (addr >= ARRAY_SIZE(s->regs)) {
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "%s: Bad offset 0x%" HWADDR_PRIx "\n", __func__,
+ addr * 4);
+ return r;
+ }
+ r = s->regs[addr];
+ break;
+ }
+ return r;
+}
+
+static void emac_write(void *opaque, hwaddr addr, uint64_t val64,
+ unsigned int size)
+{
+ MSF2EmacState *s = opaque;
+ uint32_t value = val64;
+ uint32_t enreqbits;
+ uint8_t pktcnt;
+
+ addr >>= 2;
+ switch (addr) {
+ case R_DMA_TX_CTL:
+ s->regs[addr] = value;
+ if (value & R_DMA_TX_CTL_EN_MASK) {
+ msf2_dma_tx(s);
+ }
+ break;
+ case R_DMA_RX_CTL:
+ s->regs[addr] = value;
+ if (value & R_DMA_RX_CTL_EN_MASK) {
+ s->rx_desc = s->regs[R_DMA_RX_DESC];
+ qemu_flush_queued_packets(qemu_get_queue(s->nic));
+ }
+ break;
+ case R_CFG1:
+ s->regs[addr] = value;
+ if (value & R_CFG1_RESET_MASK) {
+ msf2_emac_do_reset(s);
+ }
+ break;
+ case R_FIFO_CFG0:
+ /*
+ * For our implementation, turning on modules is instantaneous,
+ * so the states requested via the *ENREQ bits appear in the
+ * *ENRPLY bits immediately. Also the reset bits to reset PE-MCXMAC
+ * module are not emulated here since it deals with start of frames,
+ * inter-packet gap and control frames.
+ */
+ enreqbits = extract32(value, 8, 5);
+ s->regs[addr] = deposit32(value, 16, 5, enreqbits);
+ break;
+ case R_DMA_TX_DESC:
+ if (value & 0x3) {
+ qemu_log_mask(LOG_GUEST_ERROR, "Tx Descriptor address should be"
+ " 32 bit aligned\n");
+ }
+ /* Ignore [1:0] bits */
+ s->regs[addr] = value & ~3;
+ break;
+ case R_DMA_RX_DESC:
+ if (value & 0x3) {
+ qemu_log_mask(LOG_GUEST_ERROR, "Rx Descriptor address should be"
+ " 32 bit aligned\n");
+ }
+ /* Ignore [1:0] bits */
+ s->regs[addr] = value & ~3;
+ break;
+ case R_DMA_TX_STATUS:
+ if (value & R_DMA_TX_STATUS_UNDERRUN_MASK) {
+ s->regs[addr] &= ~R_DMA_TX_STATUS_UNDERRUN_MASK;
+ }
+ if (value & R_DMA_TX_STATUS_PKT_SENT_MASK) {
+ pktcnt = FIELD_EX32(s->regs[addr], DMA_TX_STATUS, PKTCNT);
+ pktcnt--;
+ s->regs[addr] = FIELD_DP32(s->regs[addr], DMA_TX_STATUS,
+ PKTCNT, pktcnt);
+ if (pktcnt == 0) {
+ s->regs[addr] &= ~R_DMA_TX_STATUS_PKT_SENT_MASK;
+ }
+ }
+ break;
+ case R_DMA_RX_STATUS:
+ if (value & R_DMA_RX_STATUS_OVERFLOW_MASK) {
+ s->regs[addr] &= ~R_DMA_RX_STATUS_OVERFLOW_MASK;
+ }
+ if (value & R_DMA_RX_STATUS_PKT_RCVD_MASK) {
+ pktcnt = FIELD_EX32(s->regs[addr], DMA_RX_STATUS, PKTCNT);
+ pktcnt--;
+ s->regs[addr] = FIELD_DP32(s->regs[addr], DMA_RX_STATUS,
+ PKTCNT, pktcnt);
+ if (pktcnt == 0) {
+ s->regs[addr] &= ~R_DMA_RX_STATUS_PKT_RCVD_MASK;
+ }
+ }
+ break;
+ case R_DMA_IRQ:
+ break;
+ case R_MII_CMD:
+ if (value & R_MII_CMD_READ_MASK) {
+ s->regs[R_MII_STS] = read_from_phy(s);
+ }
+ break;
+ case R_MII_CTL:
+ s->regs[addr] = value;
+ write_to_phy(s);
+ break;
+ case R_STA1:
+ s->regs[addr] = value;
+ /*
+ * R_STA1 [31:24] : octet 1 of mac address
+ * R_STA1 [23:16] : octet 2 of mac address
+ * R_STA1 [15:8] : octet 3 of mac address
+ * R_STA1 [7:0] : octet 4 of mac address
+ */
+ stl_be_p(s->mac_addr, value);
+ break;
+ case R_STA2:
+ s->regs[addr] = value;
+ /*
+ * R_STA2 [31:24] : octet 5 of mac address
+ * R_STA2 [23:16] : octet 6 of mac address
+ */
+ stw_be_p(s->mac_addr + 4, value >> 16);
+ break;
+ default:
+ if (addr >= ARRAY_SIZE(s->regs)) {
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "%s: Bad offset 0x%" HWADDR_PRIx "\n", __func__,
+ addr * 4);
+ return;
+ }
+ s->regs[addr] = value;
+ break;
+ }
+ emac_update_irq(s);
+}
+
+static const MemoryRegionOps emac_ops = {
+ .read = emac_read,
+ .write = emac_write,
+ .endianness = DEVICE_NATIVE_ENDIAN,
+ .impl = {
+ .min_access_size = 4,
+ .max_access_size = 4
+ }
+};
+
+static bool emac_can_rx(NetClientState *nc)
+{
+ MSF2EmacState *s = qemu_get_nic_opaque(nc);
+
+ return (s->regs[R_CFG1] & R_CFG1_RX_EN_MASK) &&
+ (s->regs[R_DMA_RX_CTL] & R_DMA_RX_CTL_EN_MASK);
+}
+
+static bool addr_filter_ok(MSF2EmacState *s, const uint8_t *buf)
+{
+ /* The broadcast MAC address: FF:FF:FF:FF:FF:FF */
+ const uint8_t broadcast_addr[] = { 0xFF, 0xFF, 0xFF, 0xFF,
+ 0xFF, 0xFF };
+ bool bcast_en = true;
+ bool mcast_en = true;
+
+ if (s->regs[R_FIFO_CFG5] & R_FIFO_CFG5_BCAST_MASK) {
+ bcast_en = true; /* Broadcast dont care for drop circuitry */
+ } else if (s->regs[R_FIFO_CFG4] & R_FIFO_CFG4_BCAST_MASK) {
+ bcast_en = false;
+ }
+
+ if (s->regs[R_FIFO_CFG5] & R_FIFO_CFG5_MCAST_MASK) {
+ mcast_en = true; /* Multicast dont care for drop circuitry */
+ } else if (s->regs[R_FIFO_CFG4] & R_FIFO_CFG4_MCAST_MASK) {
+ mcast_en = false;
+ }
+
+ if (!memcmp(buf, broadcast_addr, sizeof(broadcast_addr))) {
+ return bcast_en;
+ }
+
+ if (buf[0] & 1) {
+ return mcast_en;
+ }
+
+ return !memcmp(buf, s->mac_addr, sizeof(s->mac_addr));
+}
+
+static ssize_t emac_rx(NetClientState *nc, const uint8_t *buf, size_t size)
+{
+ MSF2EmacState *s = qemu_get_nic_opaque(nc);
+ EmacDesc d;
+ uint8_t pktcnt;
+ uint32_t status;
+
+ if (size > (s->regs[R_MAX_FRAME_LENGTH] & 0xFFFF)) {
+ return size;
+ }
+ if (!addr_filter_ok(s, buf)) {
+ return size;
+ }
+
+ emac_load_desc(s, &d, s->rx_desc);
+
+ if (d.pktsize & EMPTY_MASK) {
+ address_space_write(&s->dma_as, d.pktaddr, MEMTXATTRS_UNSPECIFIED,
+ buf, size & PKT_SIZE);
+ d.pktsize = size & PKT_SIZE;
+ emac_store_desc(s, &d, s->rx_desc);
+ /* update received packets count */
+ status = s->regs[R_DMA_RX_STATUS];
+ pktcnt = FIELD_EX32(status, DMA_RX_STATUS, PKTCNT);
+ pktcnt++;
+ s->regs[R_DMA_RX_STATUS] = FIELD_DP32(status, DMA_RX_STATUS,
+ PKTCNT, pktcnt);
+ s->regs[R_DMA_RX_STATUS] |= R_DMA_RX_STATUS_PKT_RCVD_MASK;
+ s->rx_desc = d.next;
+ } else {
+ s->regs[R_DMA_RX_CTL] &= ~R_DMA_RX_CTL_EN_MASK;
+ s->regs[R_DMA_RX_STATUS] |= R_DMA_RX_STATUS_OVERFLOW_MASK;
+ }
+ emac_update_irq(s);
+ return size;
+}
+
+static void msf2_emac_reset(DeviceState *dev)
+{
+ MSF2EmacState *s = MSS_EMAC(dev);
+
+ msf2_emac_do_reset(s);
+}
+
+static void emac_set_link(NetClientState *nc)
+{
+ MSF2EmacState *s = qemu_get_nic_opaque(nc);
+
+ msf2_phy_update_link(s);
+}
+
+static NetClientInfo net_msf2_emac_info = {
+ .type = NET_CLIENT_DRIVER_NIC,
+ .size = sizeof(NICState),
+ .can_receive = emac_can_rx,
+ .receive = emac_rx,
+ .link_status_changed = emac_set_link,
+};
+
+static void msf2_emac_realize(DeviceState *dev, Error **errp)
+{
+ MSF2EmacState *s = MSS_EMAC(dev);
+
+ if (!s->dma_mr) {
+ error_setg(errp, "MSS_EMAC 'ahb-bus' link not set");
+ return;
+ }
+
+ address_space_init(&s->dma_as, s->dma_mr, "emac-ahb");
+
+ qemu_macaddr_default_if_unset(&s->conf.macaddr);
+ s->nic = qemu_new_nic(&net_msf2_emac_info, &s->conf,
+ object_get_typename(OBJECT(dev)), dev->id, s);
+ qemu_format_nic_info_str(qemu_get_queue(s->nic), s->conf.macaddr.a);
+}
+
+static void msf2_emac_init(Object *obj)
+{
+ MSF2EmacState *s = MSS_EMAC(obj);
+
+ sysbus_init_irq(SYS_BUS_DEVICE(obj), &s->irq);
+
+ memory_region_init_io(&s->mmio, obj, &emac_ops, s,
+ "msf2-emac", R_MAX * 4);
+ sysbus_init_mmio(SYS_BUS_DEVICE(obj), &s->mmio);
+}
+
+static Property msf2_emac_properties[] = {
+ DEFINE_PROP_LINK("ahb-bus", MSF2EmacState, dma_mr,
+ TYPE_MEMORY_REGION, MemoryRegion *),
+ DEFINE_NIC_PROPERTIES(MSF2EmacState, conf),
+ DEFINE_PROP_END_OF_LIST(),
+};
+
+static const VMStateDescription vmstate_msf2_emac = {
+ .name = TYPE_MSS_EMAC,
+ .version_id = 1,
+ .minimum_version_id = 1,
+ .fields = (VMStateField[]) {
+ VMSTATE_UINT8_ARRAY(mac_addr, MSF2EmacState, ETH_ALEN),
+ VMSTATE_UINT32(rx_desc, MSF2EmacState),
+ VMSTATE_UINT16_ARRAY(phy_regs, MSF2EmacState, PHY_MAX_REGS),
+ VMSTATE_UINT32_ARRAY(regs, MSF2EmacState, R_MAX),
+ VMSTATE_END_OF_LIST()
+ }
+};
+
+static void msf2_emac_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+
+ dc->realize = msf2_emac_realize;
+ dc->reset = msf2_emac_reset;
+ dc->vmsd = &vmstate_msf2_emac;
+ device_class_set_props(dc, msf2_emac_properties);
+}
+
+static const TypeInfo msf2_emac_info = {
+ .name = TYPE_MSS_EMAC,
+ .parent = TYPE_SYS_BUS_DEVICE,
+ .instance_size = sizeof(MSF2EmacState),
+ .instance_init = msf2_emac_init,
+ .class_init = msf2_emac_class_init,
+};
+
+static void msf2_emac_register_types(void)
+{
+ type_register_static(&msf2_emac_info);
+}
+
+type_init(msf2_emac_register_types)
diff --git a/MAINTAINERS b/MAINTAINERS
index 8cbc1fac2bf..cea57331fe8 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -919,6 +919,8 @@ F: include/hw/arm/msf2-soc.h
F: include/hw/misc/msf2-sysreg.h
F: include/hw/timer/mss-timer.h
F: include/hw/ssi/mss-spi.h
+F: hw/net/msf2-emac.c
+F: include/hw/net/msf2-emac.h
Emcraft M2S-FG484
M: Subbaraya Sundeep <sundeep.lkml@gmail.com>
--
2.20.1
^ permalink raw reply related [flat|nested] 40+ messages in thread* [PULL 07/31] msf2: Add EMAC block to SmartFusion2 SoC
2020-04-30 11:51 [PULL 00/31] target-arm queue Peter Maydell
` (5 preceding siblings ...)
2020-04-30 11:51 ` [PULL 06/31] hw/net: Add Smartfusion2 emac block Peter Maydell
@ 2020-04-30 11:51 ` Peter Maydell
2020-04-30 11:51 ` [PULL 08/31] tests/boot_linux_console: Add ethernet test to SmartFusion2 Peter Maydell
` (24 subsequent siblings)
31 siblings, 0 replies; 40+ messages in thread
From: Peter Maydell @ 2020-04-30 11:51 UTC (permalink / raw)
To: qemu-devel
From: Subbaraya Sundeep <sundeep.lkml@gmail.com>
With SmartFusion2 Ethernet MAC model in
place this patch adds the same to SoC.
Signed-off-by: Subbaraya Sundeep <sundeep.lkml@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 1587048891-30493-3-git-send-email-sundeep.lkml@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
include/hw/arm/msf2-soc.h | 2 ++
hw/arm/msf2-soc.c | 26 ++++++++++++++++++++++++--
2 files changed, 26 insertions(+), 2 deletions(-)
diff --git a/include/hw/arm/msf2-soc.h b/include/hw/arm/msf2-soc.h
index 3cfe5c76ee2..c9cb214aa67 100644
--- a/include/hw/arm/msf2-soc.h
+++ b/include/hw/arm/msf2-soc.h
@@ -29,6 +29,7 @@
#include "hw/timer/mss-timer.h"
#include "hw/misc/msf2-sysreg.h"
#include "hw/ssi/mss-spi.h"
+#include "hw/net/msf2-emac.h"
#define TYPE_MSF2_SOC "msf2-soc"
#define MSF2_SOC(obj) OBJECT_CHECK(MSF2State, (obj), TYPE_MSF2_SOC)
@@ -62,6 +63,7 @@ typedef struct MSF2State {
MSF2SysregState sysreg;
MSSTimerState timer;
MSSSpiState spi[MSF2_NUM_SPIS];
+ MSF2EmacState emac;
} MSF2State;
#endif
diff --git a/hw/arm/msf2-soc.c b/hw/arm/msf2-soc.c
index 588d643b8d2..a455b8831ff 100644
--- a/hw/arm/msf2-soc.c
+++ b/hw/arm/msf2-soc.c
@@ -1,7 +1,7 @@
/*
* SmartFusion2 SoC emulation.
*
- * Copyright (c) 2017 Subbaraya Sundeep <sundeep.lkml@gmail.com>
+ * Copyright (c) 2017-2020 Subbaraya Sundeep <sundeep.lkml@gmail.com>
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
@@ -35,11 +35,14 @@
#define MSF2_TIMER_BASE 0x40004000
#define MSF2_SYSREG_BASE 0x40038000
+#define MSF2_EMAC_BASE 0x40041000
#define ENVM_BASE_ADDRESS 0x60000000
#define SRAM_BASE_ADDRESS 0x20000000
+#define MSF2_EMAC_IRQ 12
+
#define MSF2_ENVM_MAX_SIZE (512 * KiB)
/*
@@ -81,6 +84,13 @@ static void m2sxxx_soc_initfn(Object *obj)
sysbus_init_child_obj(obj, "spi[*]", &s->spi[i], sizeof(s->spi[i]),
TYPE_MSS_SPI);
}
+
+ sysbus_init_child_obj(obj, "emac", &s->emac, sizeof(s->emac),
+ TYPE_MSS_EMAC);
+ if (nd_table[0].used) {
+ qemu_check_nic_model(&nd_table[0], TYPE_MSS_EMAC);
+ qdev_set_nic_properties(DEVICE(&s->emac), &nd_table[0]);
+ }
}
static void m2sxxx_soc_realize(DeviceState *dev_soc, Error **errp)
@@ -192,6 +202,19 @@ static void m2sxxx_soc_realize(DeviceState *dev_soc, Error **errp)
g_free(bus_name);
}
+ dev = DEVICE(&s->emac);
+ object_property_set_link(OBJECT(&s->emac), OBJECT(get_system_memory()),
+ "ahb-bus", &error_abort);
+ object_property_set_bool(OBJECT(&s->emac), true, "realized", &err);
+ if (err != NULL) {
+ error_propagate(errp, err);
+ return;
+ }
+ busdev = SYS_BUS_DEVICE(dev);
+ sysbus_mmio_map(busdev, 0, MSF2_EMAC_BASE);
+ sysbus_connect_irq(busdev, 0,
+ qdev_get_gpio_in(armv7m, MSF2_EMAC_IRQ));
+
/* Below devices are not modelled yet. */
create_unimplemented_device("i2c_0", 0x40002000, 0x1000);
create_unimplemented_device("dma", 0x40003000, 0x1000);
@@ -202,7 +225,6 @@ static void m2sxxx_soc_realize(DeviceState *dev_soc, Error **errp)
create_unimplemented_device("can", 0x40015000, 0x1000);
create_unimplemented_device("rtc", 0x40017000, 0x1000);
create_unimplemented_device("apb_config", 0x40020000, 0x10000);
- create_unimplemented_device("emac", 0x40041000, 0x1000);
create_unimplemented_device("usb", 0x40043000, 0x1000);
}
--
2.20.1
^ permalink raw reply related [flat|nested] 40+ messages in thread* [PULL 08/31] tests/boot_linux_console: Add ethernet test to SmartFusion2
2020-04-30 11:51 [PULL 00/31] target-arm queue Peter Maydell
` (6 preceding siblings ...)
2020-04-30 11:51 ` [PULL 07/31] msf2: Add EMAC block to SmartFusion2 SoC Peter Maydell
@ 2020-04-30 11:51 ` Peter Maydell
2020-04-30 11:51 ` [PULL 09/31] hw/core/clock: introduce clock object Peter Maydell
` (23 subsequent siblings)
31 siblings, 0 replies; 40+ messages in thread
From: Peter Maydell @ 2020-04-30 11:51 UTC (permalink / raw)
To: qemu-devel
From: Subbaraya Sundeep <sundeep.lkml@gmail.com>
In addition to simple serial test this patch uses ping
to test the ethernet block modelled in SmartFusion2 SoC.
Signed-off-by: Subbaraya Sundeep <sundeep.lkml@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 1587048891-30493-4-git-send-email-sundeep.lkml@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
tests/acceptance/boot_linux_console.py | 15 ++++++++++-----
1 file changed, 10 insertions(+), 5 deletions(-)
diff --git a/tests/acceptance/boot_linux_console.py b/tests/acceptance/boot_linux_console.py
index f825cd9ef55..c6b06a1a138 100644
--- a/tests/acceptance/boot_linux_console.py
+++ b/tests/acceptance/boot_linux_console.py
@@ -336,13 +336,13 @@ class BootLinuxConsole(Test):
"""
uboot_url = ('https://raw.githubusercontent.com/'
'Subbaraya-Sundeep/qemu-test-binaries/'
- 'fa030bd77a014a0b8e360d3b7011df89283a2f0b/u-boot')
- uboot_hash = 'abba5d9c24cdd2d49cdc2a8aa92976cf20737eff'
+ 'fe371d32e50ca682391e1e70ab98c2942aeffb01/u-boot')
+ uboot_hash = 'cbb8cbab970f594bf6523b9855be209c08374ae2'
uboot_path = self.fetch_asset(uboot_url, asset_hash=uboot_hash)
spi_url = ('https://raw.githubusercontent.com/'
'Subbaraya-Sundeep/qemu-test-binaries/'
- 'fa030bd77a014a0b8e360d3b7011df89283a2f0b/spi.bin')
- spi_hash = '85f698329d38de63aea6e884a86fbde70890a78a'
+ 'fe371d32e50ca682391e1e70ab98c2942aeffb01/spi.bin')
+ spi_hash = '65523a1835949b6f4553be96dec1b6a38fb05501'
spi_path = self.fetch_asset(spi_url, asset_hash=spi_hash)
self.vm.set_console()
@@ -352,7 +352,12 @@ class BootLinuxConsole(Test):
'-drive', 'file=' + spi_path + ',if=mtd,format=raw',
'-no-reboot')
self.vm.launch()
- self.wait_for_console_pattern('init started: BusyBox')
+ self.wait_for_console_pattern('Enter \'help\' for a list')
+
+ exec_command_and_wait_for_pattern(self, 'ifconfig eth0 10.0.2.15',
+ 'eth0: link becomes ready')
+ exec_command_and_wait_for_pattern(self, 'ping -c 3 10.0.2.2',
+ '3 packets transmitted, 3 packets received, 0% packet loss')
def do_test_arm_raspi2(self, uart_id):
"""
--
2.20.1
^ permalink raw reply related [flat|nested] 40+ messages in thread* [PULL 09/31] hw/core/clock: introduce clock object
2020-04-30 11:51 [PULL 00/31] target-arm queue Peter Maydell
` (7 preceding siblings ...)
2020-04-30 11:51 ` [PULL 08/31] tests/boot_linux_console: Add ethernet test to SmartFusion2 Peter Maydell
@ 2020-04-30 11:51 ` Peter Maydell
2020-04-30 14:35 ` Peter Maydell
2020-10-17 11:47 ` Philippe Mathieu-Daudé
2020-04-30 11:51 ` [PULL 10/31] hw/core/clock-vmstate: define a vmstate entry for clock state Peter Maydell
` (22 subsequent siblings)
31 siblings, 2 replies; 40+ messages in thread
From: Peter Maydell @ 2020-04-30 11:51 UTC (permalink / raw)
To: qemu-devel
This object may be used to represent a clock inside a clock tree.
A clock may be connected to another clock so that it receives update,
through a callback, whenever the source/parent clock is updated.
Although only the root clock of a clock tree controls the values
(represented as periods) of all clocks in tree, each clock holds
a local state containing the current value so that it can be fetched
independently. It will allows us to fullfill migration requirements
by migrating each clock independently of others.
This is based on the original work of Frederic Konrad.
Signed-off-by: Damien Hedde <damien.hedde@greensocs.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20200406135251.157596-2-damien.hedde@greensocs.com
[PMM: Use uint64_t rather than unsigned long long in trace events;
the dtrace backend can't handle the latter]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
hw/core/Makefile.objs | 1 +
include/hw/clock.h | 216 ++++++++++++++++++++++++++++++++++++++++++
hw/core/clock.c | 130 +++++++++++++++++++++++++
hw/core/trace-events | 7 ++
4 files changed, 354 insertions(+)
create mode 100644 include/hw/clock.h
create mode 100644 hw/core/clock.c
diff --git a/hw/core/Makefile.objs b/hw/core/Makefile.objs
index 6215e7c2085..1d9b0aa2057 100644
--- a/hw/core/Makefile.objs
+++ b/hw/core/Makefile.objs
@@ -7,6 +7,7 @@ common-obj-y += hotplug.o
common-obj-y += vmstate-if.o
# irq.o needed for qdev GPIO handling:
common-obj-y += irq.o
+common-obj-y += clock.o
common-obj-$(CONFIG_SOFTMMU) += reset.o
common-obj-$(CONFIG_SOFTMMU) += qdev-fw.o
diff --git a/include/hw/clock.h b/include/hw/clock.h
new file mode 100644
index 00000000000..82a7f3c6982
--- /dev/null
+++ b/include/hw/clock.h
@@ -0,0 +1,216 @@
+/*
+ * Hardware Clocks
+ *
+ * Copyright GreenSocs 2016-2020
+ *
+ * Authors:
+ * Frederic Konrad
+ * Damien Hedde
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or later.
+ * See the COPYING file in the top-level directory.
+ */
+
+#ifndef QEMU_HW_CLOCK_H
+#define QEMU_HW_CLOCK_H
+
+#include "qom/object.h"
+#include "qemu/queue.h"
+
+#define TYPE_CLOCK "clock"
+#define CLOCK(obj) OBJECT_CHECK(Clock, (obj), TYPE_CLOCK)
+
+typedef void ClockCallback(void *opaque);
+
+/*
+ * clock store a value representing the clock's period in 2^-32ns unit.
+ * It can represent:
+ * + periods from 2^-32ns up to 4seconds
+ * + frequency from ~0.25Hz 2e10Ghz
+ * Resolution of frequency representation decreases with frequency:
+ * + at 100MHz, resolution is ~2mHz
+ * + at 1Ghz, resolution is ~0.2Hz
+ * + at 10Ghz, resolution is ~20Hz
+ */
+#define CLOCK_SECOND (1000000000llu << 32)
+
+/*
+ * macro helpers to convert to hertz / nanosecond
+ */
+#define CLOCK_PERIOD_FROM_NS(ns) ((ns) * (CLOCK_SECOND / 1000000000llu))
+#define CLOCK_PERIOD_TO_NS(per) ((per) / (CLOCK_SECOND / 1000000000llu))
+#define CLOCK_PERIOD_FROM_HZ(hz) (((hz) != 0) ? CLOCK_SECOND / (hz) : 0u)
+#define CLOCK_PERIOD_TO_HZ(per) (((per) != 0) ? CLOCK_SECOND / (per) : 0u)
+
+/**
+ * Clock:
+ * @parent_obj: parent class
+ * @period: unsigned integer representing the period of the clock
+ * @canonical_path: clock path string cache (used for trace purpose)
+ * @callback: called when clock changes
+ * @callback_opaque: argument for @callback
+ * @source: source (or parent in clock tree) of the clock
+ * @children: list of clocks connected to this one (it is their source)
+ * @sibling: structure used to form a clock list
+ */
+
+typedef struct Clock Clock;
+
+struct Clock {
+ /*< private >*/
+ Object parent_obj;
+
+ /* all fields are private and should not be modified directly */
+
+ /* fields */
+ uint64_t period;
+ char *canonical_path;
+ ClockCallback *callback;
+ void *callback_opaque;
+
+ /* Clocks are organized in a clock tree */
+ Clock *source;
+ QLIST_HEAD(, Clock) children;
+ QLIST_ENTRY(Clock) sibling;
+};
+
+/**
+ * clock_setup_canonical_path:
+ * @clk: clock
+ *
+ * compute the canonical path of the clock (used by log messages)
+ */
+void clock_setup_canonical_path(Clock *clk);
+
+/**
+ * clock_set_callback:
+ * @clk: the clock to register the callback into
+ * @cb: the callback function
+ * @opaque: the argument to the callback
+ *
+ * Register a callback called on every clock update.
+ */
+void clock_set_callback(Clock *clk, ClockCallback *cb, void *opaque);
+
+/**
+ * clock_clear_callback:
+ * @clk: the clock to delete the callback from
+ *
+ * Unregister the callback registered with clock_set_callback.
+ */
+void clock_clear_callback(Clock *clk);
+
+/**
+ * clock_set_source:
+ * @clk: the clock.
+ * @src: the source clock
+ *
+ * Setup @src as the clock source of @clk. The current @src period
+ * value is also copied to @clk and its subtree but no callback is
+ * called.
+ * Further @src update will be propagated to @clk and its subtree.
+ */
+void clock_set_source(Clock *clk, Clock *src);
+
+/**
+ * clock_set:
+ * @clk: the clock to initialize.
+ * @value: the clock's value, 0 means unclocked
+ *
+ * Set the local cached period value of @clk to @value.
+ */
+void clock_set(Clock *clk, uint64_t value);
+
+static inline void clock_set_hz(Clock *clk, unsigned hz)
+{
+ clock_set(clk, CLOCK_PERIOD_FROM_HZ(hz));
+}
+
+static inline void clock_set_ns(Clock *clk, unsigned ns)
+{
+ clock_set(clk, CLOCK_PERIOD_FROM_NS(ns));
+}
+
+/**
+ * clock_propagate:
+ * @clk: the clock
+ *
+ * Propagate the clock period that has been previously configured using
+ * @clock_set(). This will update recursively all connected clocks.
+ * It is an error to call this function on a clock which has a source.
+ * Note: this function must not be called during device inititialization
+ * or migration.
+ */
+void clock_propagate(Clock *clk);
+
+/**
+ * clock_update:
+ * @clk: the clock to update.
+ * @value: the new clock's value, 0 means unclocked
+ *
+ * Update the @clk to the new @value. All connected clocks will be informed
+ * of this update. This is equivalent to call @clock_set() then
+ * @clock_propagate().
+ */
+static inline void clock_update(Clock *clk, uint64_t value)
+{
+ clock_set(clk, value);
+ clock_propagate(clk);
+}
+
+static inline void clock_update_hz(Clock *clk, unsigned hz)
+{
+ clock_update(clk, CLOCK_PERIOD_FROM_HZ(hz));
+}
+
+static inline void clock_update_ns(Clock *clk, unsigned ns)
+{
+ clock_update(clk, CLOCK_PERIOD_FROM_NS(ns));
+}
+
+/**
+ * clock_get:
+ * @clk: the clk to fetch the clock
+ *
+ * @return: the current period.
+ */
+static inline uint64_t clock_get(const Clock *clk)
+{
+ return clk->period;
+}
+
+static inline unsigned clock_get_hz(Clock *clk)
+{
+ return CLOCK_PERIOD_TO_HZ(clock_get(clk));
+}
+
+static inline unsigned clock_get_ns(Clock *clk)
+{
+ return CLOCK_PERIOD_TO_NS(clock_get(clk));
+}
+
+/**
+ * clock_is_enabled:
+ * @clk: a clock
+ *
+ * @return: true if the clock is running.
+ */
+static inline bool clock_is_enabled(const Clock *clk)
+{
+ return clock_get(clk) != 0;
+}
+
+static inline void clock_init(Clock *clk, uint64_t value)
+{
+ clock_set(clk, value);
+}
+static inline void clock_init_hz(Clock *clk, uint64_t value)
+{
+ clock_set_hz(clk, value);
+}
+static inline void clock_init_ns(Clock *clk, uint64_t value)
+{
+ clock_set_ns(clk, value);
+}
+
+#endif /* QEMU_HW_CLOCK_H */
diff --git a/hw/core/clock.c b/hw/core/clock.c
new file mode 100644
index 00000000000..3c0daf7d4cf
--- /dev/null
+++ b/hw/core/clock.c
@@ -0,0 +1,130 @@
+/*
+ * Hardware Clocks
+ *
+ * Copyright GreenSocs 2016-2020
+ *
+ * Authors:
+ * Frederic Konrad
+ * Damien Hedde
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or later.
+ * See the COPYING file in the top-level directory.
+ */
+
+#include "qemu/osdep.h"
+#include "hw/clock.h"
+#include "trace.h"
+
+#define CLOCK_PATH(_clk) (_clk->canonical_path)
+
+void clock_setup_canonical_path(Clock *clk)
+{
+ g_free(clk->canonical_path);
+ clk->canonical_path = object_get_canonical_path(OBJECT(clk));
+}
+
+void clock_set_callback(Clock *clk, ClockCallback *cb, void *opaque)
+{
+ clk->callback = cb;
+ clk->callback_opaque = opaque;
+}
+
+void clock_clear_callback(Clock *clk)
+{
+ clock_set_callback(clk, NULL, NULL);
+}
+
+void clock_set(Clock *clk, uint64_t period)
+{
+ trace_clock_set(CLOCK_PATH(clk), CLOCK_PERIOD_TO_NS(clk->period),
+ CLOCK_PERIOD_TO_NS(period));
+ clk->period = period;
+}
+
+static void clock_propagate_period(Clock *clk, bool call_callbacks)
+{
+ Clock *child;
+
+ QLIST_FOREACH(child, &clk->children, sibling) {
+ if (child->period != clk->period) {
+ child->period = clk->period;
+ trace_clock_update(CLOCK_PATH(child), CLOCK_PATH(clk),
+ CLOCK_PERIOD_TO_NS(clk->period),
+ call_callbacks);
+ if (call_callbacks && child->callback) {
+ child->callback(child->callback_opaque);
+ }
+ clock_propagate_period(child, call_callbacks);
+ }
+ }
+}
+
+void clock_propagate(Clock *clk)
+{
+ assert(clk->source == NULL);
+ trace_clock_propagate(CLOCK_PATH(clk));
+ clock_propagate_period(clk, true);
+}
+
+void clock_set_source(Clock *clk, Clock *src)
+{
+ /* changing clock source is not supported */
+ assert(!clk->source);
+
+ trace_clock_set_source(CLOCK_PATH(clk), CLOCK_PATH(src));
+
+ clk->period = src->period;
+ QLIST_INSERT_HEAD(&src->children, clk, sibling);
+ clk->source = src;
+ clock_propagate_period(clk, false);
+}
+
+static void clock_disconnect(Clock *clk)
+{
+ if (clk->source == NULL) {
+ return;
+ }
+
+ trace_clock_disconnect(CLOCK_PATH(clk));
+
+ clk->source = NULL;
+ QLIST_REMOVE(clk, sibling);
+}
+
+static void clock_initfn(Object *obj)
+{
+ Clock *clk = CLOCK(obj);
+
+ QLIST_INIT(&clk->children);
+}
+
+static void clock_finalizefn(Object *obj)
+{
+ Clock *clk = CLOCK(obj);
+ Clock *child, *next;
+
+ /* clear our list of children */
+ QLIST_FOREACH_SAFE(child, &clk->children, sibling, next) {
+ clock_disconnect(child);
+ }
+
+ /* remove us from source's children list */
+ clock_disconnect(clk);
+
+ g_free(clk->canonical_path);
+}
+
+static const TypeInfo clock_info = {
+ .name = TYPE_CLOCK,
+ .parent = TYPE_OBJECT,
+ .instance_size = sizeof(Clock),
+ .instance_init = clock_initfn,
+ .instance_finalize = clock_finalizefn,
+};
+
+static void clock_register_types(void)
+{
+ type_register_static(&clock_info);
+}
+
+type_init(clock_register_types)
diff --git a/hw/core/trace-events b/hw/core/trace-events
index aecd8e160eb..1ac60ede6b7 100644
--- a/hw/core/trace-events
+++ b/hw/core/trace-events
@@ -27,3 +27,10 @@ resettable_phase_exit_begin(void *obj, const char *objtype, unsigned count, int
resettable_phase_exit_exec(void *obj, const char *objtype, int has_method) "obj=%p(%s) method=%d"
resettable_phase_exit_end(void *obj, const char *objtype, unsigned count) "obj=%p(%s) count=%d"
resettable_transitional_function(void *obj, const char *objtype) "obj=%p(%s)"
+
+# clock.c
+clock_set_source(const char *clk, const char *src) "'%s', src='%s'"
+clock_disconnect(const char *clk) "'%s'"
+clock_set(const char *clk, uint64_t old, uint64_t new) "'%s', ns=%"PRIu64"->%"PRIu64
+clock_propagate(const char *clk) "'%s'"
+clock_update(const char *clk, const char *src, uint64_t val, int cb) "'%s', src='%s', ns=%"PRIu64", cb=%d"
--
2.20.1
^ permalink raw reply related [flat|nested] 40+ messages in thread* Re: [PULL 09/31] hw/core/clock: introduce clock object
2020-04-30 11:51 ` [PULL 09/31] hw/core/clock: introduce clock object Peter Maydell
@ 2020-04-30 14:35 ` Peter Maydell
2020-10-17 11:47 ` Philippe Mathieu-Daudé
1 sibling, 0 replies; 40+ messages in thread
From: Peter Maydell @ 2020-04-30 14:35 UTC (permalink / raw)
To: QEMU Developers, Damien Hedde
On Thu, 30 Apr 2020 at 12:51, Peter Maydell <peter.maydell@linaro.org> wrote:
>
> This object may be used to represent a clock inside a clock tree.
>
> A clock may be connected to another clock so that it receives update,
> through a callback, whenever the source/parent clock is updated.
>
> Although only the root clock of a clock tree controls the values
> (represented as periods) of all clocks in tree, each clock holds
> a local state containing the current value so that it can be fetched
> independently. It will allows us to fullfill migration requirements
> by migrating each clock independently of others.
> +#define CLOCK_SECOND (1000000000llu << 32)
It turns out that FreeBSD's time.h defines a CLOCK_SECOND
macro, which means this doesn't compile on that platform.
I'm going to rename it CLOCK_PERIOD_1SEC; it's only used
in include/hw/clock.h so not a big change:
diff --git a/include/hw/clock.h b/include/hw/clock.h
index f3e44e9460c..f822a942209 100644
--- a/include/hw/clock.h
+++ b/include/hw/clock.h
@@ -32,15 +32,15 @@ typedef void ClockCallback(void *opaque);
* + at 1Ghz, resolution is ~0.2Hz
* + at 10Ghz, resolution is ~20Hz
*/
-#define CLOCK_SECOND (1000000000llu << 32)
+#define CLOCK_PERIOD_1SEC (1000000000llu << 32)
/*
* macro helpers to convert to hertz / nanosecond
*/
-#define CLOCK_PERIOD_FROM_NS(ns) ((ns) * (CLOCK_SECOND / 1000000000llu))
-#define CLOCK_PERIOD_TO_NS(per) ((per) / (CLOCK_SECOND / 1000000000llu))
-#define CLOCK_PERIOD_FROM_HZ(hz) (((hz) != 0) ? CLOCK_SECOND / (hz) : 0u)
-#define CLOCK_PERIOD_TO_HZ(per) (((per) != 0) ? CLOCK_SECOND / (per) : 0u)
+#define CLOCK_PERIOD_FROM_NS(ns) ((ns) * (CLOCK_PERIOD_1SEC / 1000000000llu))
+#define CLOCK_PERIOD_TO_NS(per) ((per) / (CLOCK_PERIOD_1SEC / 1000000000llu))
+#define CLOCK_PERIOD_FROM_HZ(hz) (((hz) != 0) ? CLOCK_PERIOD_1SEC / (hz) : 0u)
+#define CLOCK_PERIOD_TO_HZ(per) (((per) != 0) ? CLOCK_PERIOD_1SEC / (per) : 0u)
/**
* Clock:
thanks
-- PMM
^ permalink raw reply related [flat|nested] 40+ messages in thread
* Re: [PULL 09/31] hw/core/clock: introduce clock object
2020-04-30 11:51 ` [PULL 09/31] hw/core/clock: introduce clock object Peter Maydell
2020-04-30 14:35 ` Peter Maydell
@ 2020-10-17 11:47 ` Philippe Mathieu-Daudé
2020-10-20 16:06 ` Philippe Mathieu-Daudé
1 sibling, 1 reply; 40+ messages in thread
From: Philippe Mathieu-Daudé @ 2020-10-17 11:47 UTC (permalink / raw)
To: Peter Maydell, qemu-devel, Damien Hedde
Cc: Edgar E. Iglesias, Alistair Francis, Luc Michel
Hi Damien, Peter,
On 4/30/20 1:51 PM, Peter Maydell wrote:
> This object may be used to represent a clock inside a clock tree.
>
> A clock may be connected to another clock so that it receives update,
> through a callback, whenever the source/parent clock is updated.
>
> Although only the root clock of a clock tree controls the values
> (represented as periods) of all clocks in tree, each clock holds
> a local state containing the current value so that it can be fetched
> independently. It will allows us to fullfill migration requirements
> by migrating each clock independently of others.
>
> This is based on the original work of Frederic Konrad.
>
> Signed-off-by: Damien Hedde <damien.hedde@greensocs.com>
> Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
> Message-id: 20200406135251.157596-2-damien.hedde@greensocs.com
> [PMM: Use uint64_t rather than unsigned long long in trace events;
> the dtrace backend can't handle the latter]
> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
> ---
> hw/core/Makefile.objs | 1 +
> include/hw/clock.h | 216 ++++++++++++++++++++++++++++++++++++++++++
> hw/core/clock.c | 130 +++++++++++++++++++++++++
> hw/core/trace-events | 7 ++
> 4 files changed, 354 insertions(+)
> create mode 100644 include/hw/clock.h
> create mode 100644 hw/core/clock.c
>
> diff --git a/hw/core/Makefile.objs b/hw/core/Makefile.objs
> index 6215e7c2085..1d9b0aa2057 100644
> --- a/hw/core/Makefile.objs
> +++ b/hw/core/Makefile.objs
> @@ -7,6 +7,7 @@ common-obj-y += hotplug.o
> common-obj-y += vmstate-if.o
> # irq.o needed for qdev GPIO handling:
> common-obj-y += irq.o
> +common-obj-y += clock.o
>
> common-obj-$(CONFIG_SOFTMMU) += reset.o
> common-obj-$(CONFIG_SOFTMMU) += qdev-fw.o
> diff --git a/include/hw/clock.h b/include/hw/clock.h
> new file mode 100644
> index 00000000000..82a7f3c6982
> --- /dev/null
> +++ b/include/hw/clock.h
> @@ -0,0 +1,216 @@
> +/*
> + * Hardware Clocks
> + *
> + * Copyright GreenSocs 2016-2020
> + *
> + * Authors:
> + * Frederic Konrad
> + * Damien Hedde
> + *
> + * This work is licensed under the terms of the GNU GPL, version 2 or later.
> + * See the COPYING file in the top-level directory.
> + */
> +
> +#ifndef QEMU_HW_CLOCK_H
> +#define QEMU_HW_CLOCK_H
> +
> +#include "qom/object.h"
> +#include "qemu/queue.h"
> +
> +#define TYPE_CLOCK "clock"
> +#define CLOCK(obj) OBJECT_CHECK(Clock, (obj), TYPE_CLOCK)
> +
> +typedef void ClockCallback(void *opaque);
> +
> +/*
> + * clock store a value representing the clock's period in 2^-32ns unit.
> + * It can represent:
> + * + periods from 2^-32ns up to 4seconds
> + * + frequency from ~0.25Hz 2e10Ghz
> + * Resolution of frequency representation decreases with frequency:
> + * + at 100MHz, resolution is ~2mHz
> + * + at 1Ghz, resolution is ~0.2Hz
> + * + at 10Ghz, resolution is ~20Hz
> + */
> +#define CLOCK_SECOND (1000000000llu << 32)
> +
> +/*
> + * macro helpers to convert to hertz / nanosecond
> + */
> +#define CLOCK_PERIOD_FROM_NS(ns) ((ns) * (CLOCK_SECOND / 1000000000llu))
> +#define CLOCK_PERIOD_TO_NS(per) ((per) / (CLOCK_SECOND / 1000000000llu))
> +#define CLOCK_PERIOD_FROM_HZ(hz) (((hz) != 0) ? CLOCK_SECOND / (hz) : 0u)
I'm having Floating Point Exception using a frequency of 1GHz.
Using frequency >=1GHz we have CLOCK_PERIOD_FROM_HZ(hz) > 0x100000000.
Then CLOCK_PERIOD_TO_NS(0x100000000) = 0.
So for frequency >=1GHz clock_get_ns() returns 0.
> +#define CLOCK_PERIOD_TO_HZ(per) (((per) != 0) ? CLOCK_SECOND / (per) : 0u)
> +
[...]
^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: [PULL 09/31] hw/core/clock: introduce clock object
2020-10-17 11:47 ` Philippe Mathieu-Daudé
@ 2020-10-20 16:06 ` Philippe Mathieu-Daudé
2020-10-20 16:46 ` Peter Maydell
0 siblings, 1 reply; 40+ messages in thread
From: Philippe Mathieu-Daudé @ 2020-10-20 16:06 UTC (permalink / raw)
To: Peter Maydell, qemu-devel, Damien Hedde
Cc: Edgar E. Iglesias, Alistair Francis, Luc Michel
On 10/17/20 1:47 PM, Philippe Mathieu-Daudé wrote:
> Hi Damien, Peter,
>
> On 4/30/20 1:51 PM, Peter Maydell wrote:
>> This object may be used to represent a clock inside a clock tree.
>>
>> A clock may be connected to another clock so that it receives update,
>> through a callback, whenever the source/parent clock is updated.
>>
>> Although only the root clock of a clock tree controls the values
>> (represented as periods) of all clocks in tree, each clock holds
>> a local state containing the current value so that it can be fetched
>> independently. It will allows us to fullfill migration requirements
>> by migrating each clock independently of others.
>>
>> This is based on the original work of Frederic Konrad.
>>
>> Signed-off-by: Damien Hedde <damien.hedde@greensocs.com>
>> Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
>> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
>> Message-id: 20200406135251.157596-2-damien.hedde@greensocs.com
>> [PMM: Use uint64_t rather than unsigned long long in trace events;
>> the dtrace backend can't handle the latter]
>> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
>> ---
>> hw/core/Makefile.objs | 1 +
>> include/hw/clock.h | 216 ++++++++++++++++++++++++++++++++++++++++++
>> hw/core/clock.c | 130 +++++++++++++++++++++++++
>> hw/core/trace-events | 7 ++
>> 4 files changed, 354 insertions(+)
>> create mode 100644 include/hw/clock.h
>> create mode 100644 hw/core/clock.c
>>
>> diff --git a/hw/core/Makefile.objs b/hw/core/Makefile.objs
>> index 6215e7c2085..1d9b0aa2057 100644
>> --- a/hw/core/Makefile.objs
>> +++ b/hw/core/Makefile.objs
>> @@ -7,6 +7,7 @@ common-obj-y += hotplug.o
>> common-obj-y += vmstate-if.o
>> # irq.o needed for qdev GPIO handling:
>> common-obj-y += irq.o
>> +common-obj-y += clock.o
>> common-obj-$(CONFIG_SOFTMMU) += reset.o
>> common-obj-$(CONFIG_SOFTMMU) += qdev-fw.o
>> diff --git a/include/hw/clock.h b/include/hw/clock.h
>> new file mode 100644
>> index 00000000000..82a7f3c6982
>> --- /dev/null
>> +++ b/include/hw/clock.h
>> @@ -0,0 +1,216 @@
>> +/*
>> + * Hardware Clocks
>> + *
>> + * Copyright GreenSocs 2016-2020
>> + *
>> + * Authors:
>> + * Frederic Konrad
>> + * Damien Hedde
>> + *
>> + * This work is licensed under the terms of the GNU GPL, version 2 or
>> later.
>> + * See the COPYING file in the top-level directory.
>> + */
>> +
>> +#ifndef QEMU_HW_CLOCK_H
>> +#define QEMU_HW_CLOCK_H
>> +
>> +#include "qom/object.h"
>> +#include "qemu/queue.h"
>> +
>> +#define TYPE_CLOCK "clock"
>> +#define CLOCK(obj) OBJECT_CHECK(Clock, (obj), TYPE_CLOCK)
>> +
>> +typedef void ClockCallback(void *opaque);
>> +
>> +/*
>> + * clock store a value representing the clock's period in 2^-32ns unit.
>> + * It can represent:
>> + * + periods from 2^-32ns up to 4seconds
>> + * + frequency from ~0.25Hz 2e10Ghz
>> + * Resolution of frequency representation decreases with frequency:
>> + * + at 100MHz, resolution is ~2mHz
>> + * + at 1Ghz, resolution is ~0.2Hz
>> + * + at 10Ghz, resolution is ~20Hz
>> + */
>> +#define CLOCK_SECOND (1000000000llu << 32)
>> +
>> +/*
>> + * macro helpers to convert to hertz / nanosecond
>> + */
>> +#define CLOCK_PERIOD_FROM_NS(ns) ((ns) * (CLOCK_SECOND / 1000000000llu))
>> +#define CLOCK_PERIOD_TO_NS(per) ((per) / (CLOCK_SECOND / 1000000000llu))
>> +#define CLOCK_PERIOD_FROM_HZ(hz) (((hz) != 0) ? CLOCK_SECOND / (hz) :
>> 0u)
>
> I'm having Floating Point Exception using a frequency of 1GHz.
>
> Using frequency >=1GHz we have CLOCK_PERIOD_FROM_HZ(hz) > 0x100000000.
>
> Then CLOCK_PERIOD_TO_NS(0x100000000) = 0.
>
> So for frequency >=1GHz clock_get_ns() returns 0.
So Peter suggested on IRC to rewrite the code consuming this API
to avoid reaching this limit :)
Still some assert would help other developers triggering the same
issue to quicker figure how to bypass the problem.
>
>> +#define CLOCK_PERIOD_TO_HZ(per) (((per) != 0) ? CLOCK_SECOND / (per)
>> : 0u)
>> +
> [...]
>
^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: [PULL 09/31] hw/core/clock: introduce clock object
2020-10-20 16:06 ` Philippe Mathieu-Daudé
@ 2020-10-20 16:46 ` Peter Maydell
2020-10-20 17:46 ` Philippe Mathieu-Daudé
0 siblings, 1 reply; 40+ messages in thread
From: Peter Maydell @ 2020-10-20 16:46 UTC (permalink / raw)
To: Philippe Mathieu-Daudé
Cc: Damien Hedde, Edgar E. Iglesias, Alistair Francis,
QEMU Developers, Luc Michel
On Tue, 20 Oct 2020 at 17:06, Philippe Mathieu-Daudé <f4bug@amsat.org> wrote:
>
> On 10/17/20 1:47 PM, Philippe Mathieu-Daudé wrote:
> > Hi Damien, Peter,
> >
> >> +/*
> >> + * macro helpers to convert to hertz / nanosecond
> >> + */
> >> +#define CLOCK_PERIOD_FROM_NS(ns) ((ns) * (CLOCK_SECOND / 1000000000llu))
> >> +#define CLOCK_PERIOD_TO_NS(per) ((per) / (CLOCK_SECOND / 1000000000llu))
> >> +#define CLOCK_PERIOD_FROM_HZ(hz) (((hz) != 0) ? CLOCK_SECOND / (hz) :
> >> 0u)
> >
> > I'm having Floating Point Exception using a frequency of 1GHz.
> >
> > Using frequency >=1GHz we have CLOCK_PERIOD_FROM_HZ(hz) > 0x100000000.
> >
> > Then CLOCK_PERIOD_TO_NS(0x100000000) = 0.
> >
> > So for frequency >=1GHz clock_get_ns() returns 0.
>
> So Peter suggested on IRC to rewrite the code consuming this API
> to avoid reaching this limit :)
>
> Still some assert would help other developers triggering the same
> issue to quicker figure how to bypass the problem.
The fundamental problem here is that if you have a 2GHz
clock then it is just not possible to have an API which
says "give me the period of this clock in nanoseconds
as an integer".
Even for clocks which have lower frequencies, there is
still a rounding/accuracy problem when converting to
a nanoseconds count. I think these macros and the
functions that wrap them are in retrospect a mistake,
and we should replace them with other APIs that allow
calculations which can avoid the rounding problem
(eg if what you need is "how many nanoseconds is it
until 5000 ticks have expired" we would need an API
for that, rather than trying to calculate it as
5000 * nanoseconds_per_tick).
It looks like currently the only uses of CLOCK_PERIOD_TO_NS()
and clock_get_ns() are:
* some tracepoints in the clock code itself
* mips_cp0_period_set(), which does:
env->cp0_count_ns = cpu->cp0_count_rate
* clock_get_ns(MIPS_CPU(cpu)->clock);
so I think it is trying to calculate "nanoseconds for
X ticks of the clock".
CLOCK_PERIOD_TO_HZ() and clock_get_hz() are used by:
* the qdev_print() code that prints a human-readable
description of the clock
* hw/char/cadence_uart.c and hw/char/ibex_uart.c code
that calculates a baud rate given the input clock
CLOCK_PERIOD_FROM_HZ and CLOCK_PERIOD_FROM_NS are
used only in the clock_update*() and clock_set*()
functions. I think those should all be OK, because
they're just setting the period of the clock (possibly
propagating it to connected clocks), and we can
assume the caller uses whatever unit they naturally
have available as the accurate way to set the clock.
So that suggests to me that we should look at designing
APIs for:
* "give me the time in nanoseconds for X ticks of this clock"
* "give me a human-readable string describing this clock"
for the qdev_print() monitor output
and we should adjust the clock_set and clock_update tracepoints
to trace the raw period values (perhaps with an extra
"approx %"PRIu64" ns" for the benefit of humans reading traces).
Then we can delete CLOCK_PERIOD_TO_NS() and clock_get_ns().
Not sure about what the UART code should be doing. Given
that it's basically calculating baud rates it does eventually
want to get a frequency in hz but maybe we should arrange
for the frequency-division part to happen before we
convert from clock-period to hz rather than after.
thanks
-- PMM
^ permalink raw reply [flat|nested] 40+ messages in thread* Re: [PULL 09/31] hw/core/clock: introduce clock object
2020-10-20 16:46 ` Peter Maydell
@ 2020-10-20 17:46 ` Philippe Mathieu-Daudé
0 siblings, 0 replies; 40+ messages in thread
From: Philippe Mathieu-Daudé @ 2020-10-20 17:46 UTC (permalink / raw)
To: Peter Maydell
Cc: Damien Hedde, Edgar E. Iglesias, Alistair Francis,
QEMU Developers, Luc Michel
On 10/20/20 6:46 PM, Peter Maydell wrote:
> On Tue, 20 Oct 2020 at 17:06, Philippe Mathieu-Daudé <f4bug@amsat.org> wrote:
>>
>> On 10/17/20 1:47 PM, Philippe Mathieu-Daudé wrote:
>>> Hi Damien, Peter,
>>>
>>>> +/*
>>>> + * macro helpers to convert to hertz / nanosecond
>>>> + */
>>>> +#define CLOCK_PERIOD_FROM_NS(ns) ((ns) * (CLOCK_SECOND / 1000000000llu))
>>>> +#define CLOCK_PERIOD_TO_NS(per) ((per) / (CLOCK_SECOND / 1000000000llu))
>>>> +#define CLOCK_PERIOD_FROM_HZ(hz) (((hz) != 0) ? CLOCK_SECOND / (hz) :
>>>> 0u)
>>>
>>> I'm having Floating Point Exception using a frequency of 1GHz.
>>>
>>> Using frequency >=1GHz we have CLOCK_PERIOD_FROM_HZ(hz) > 0x100000000.
>>>
>>> Then CLOCK_PERIOD_TO_NS(0x100000000) = 0.
>>>
>>> So for frequency >=1GHz clock_get_ns() returns 0.
>>
>> So Peter suggested on IRC to rewrite the code consuming this API
>> to avoid reaching this limit :)
>>
>> Still some assert would help other developers triggering the same
>> issue to quicker figure how to bypass the problem.
>
> The fundamental problem here is that if you have a 2GHz
> clock then it is just not possible to have an API which
> says "give me the period of this clock in nanoseconds
> as an integer".
>
> Even for clocks which have lower frequencies, there is
> still a rounding/accuracy problem when converting to
> a nanoseconds count. I think these macros and the
> functions that wrap them are in retrospect a mistake,
> and we should replace them with other APIs that allow
> calculations which can avoid the rounding problem
> (eg if what you need is "how many nanoseconds is it
> until 5000 ticks have expired" we would need an API
> for that, rather than trying to calculate it as
> 5000 * nanoseconds_per_tick).
>
> It looks like currently the only uses of CLOCK_PERIOD_TO_NS()
> and clock_get_ns() are:
> * some tracepoints in the clock code itself
> * mips_cp0_period_set(), which does:
> env->cp0_count_ns = cpu->cp0_count_rate
> * clock_get_ns(MIPS_CPU(cpu)->clock);
> so I think it is trying to calculate "nanoseconds for
> X ticks of the clock".
>
> CLOCK_PERIOD_TO_HZ() and clock_get_hz() are used by:
> * the qdev_print() code that prints a human-readable
> description of the clock
> * hw/char/cadence_uart.c and hw/char/ibex_uart.c code
> that calculates a baud rate given the input clock
>
> CLOCK_PERIOD_FROM_HZ and CLOCK_PERIOD_FROM_NS are
> used only in the clock_update*() and clock_set*()
> functions. I think those should all be OK, because
> they're just setting the period of the clock (possibly
> propagating it to connected clocks), and we can
> assume the caller uses whatever unit they naturally
> have available as the accurate way to set the clock.
>
> So that suggests to me that we should look at designing
> APIs for:
> * "give me the time in nanoseconds for X ticks of this clock"
> * "give me a human-readable string describing this clock"
> for the qdev_print() monitor output
Half of it is commit 709616c713f
("util/cutils: Introduce freq_to_str() to display Hertz units")
Other half on the list:
https://www.mail-archive.com/qemu-devel@nongnu.org/msg749603.html
>
> and we should adjust the clock_set and clock_update tracepoints
> to trace the raw period values (perhaps with an extra
> "approx %"PRIu64" ns" for the benefit of humans reading traces).
> Then we can delete CLOCK_PERIOD_TO_NS() and clock_get_ns().
>
> Not sure about what the UART code should be doing. Given
> that it's basically calculating baud rates it does eventually
> want to get a frequency in hz but maybe we should arrange
> for the frequency-division part to happen before we
> convert from clock-period to hz rather than after.
>
> thanks
> -- PMM
>
^ permalink raw reply [flat|nested] 40+ messages in thread
* [PULL 10/31] hw/core/clock-vmstate: define a vmstate entry for clock state
2020-04-30 11:51 [PULL 00/31] target-arm queue Peter Maydell
` (8 preceding siblings ...)
2020-04-30 11:51 ` [PULL 09/31] hw/core/clock: introduce clock object Peter Maydell
@ 2020-04-30 11:51 ` Peter Maydell
2020-04-30 11:51 ` [PULL 11/31] qdev: add clock input&output support to devices Peter Maydell
` (21 subsequent siblings)
31 siblings, 0 replies; 40+ messages in thread
From: Peter Maydell @ 2020-04-30 11:51 UTC (permalink / raw)
To: qemu-devel
From: Damien Hedde <damien.hedde@greensocs.com>
Signed-off-by: Damien Hedde <damien.hedde@greensocs.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20200406135251.157596-3-damien.hedde@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
hw/core/Makefile.objs | 1 +
include/hw/clock.h | 9 +++++++++
hw/core/clock-vmstate.c | 25 +++++++++++++++++++++++++
3 files changed, 35 insertions(+)
create mode 100644 hw/core/clock-vmstate.c
diff --git a/hw/core/Makefile.objs b/hw/core/Makefile.objs
index 1d9b0aa2057..115df550874 100644
--- a/hw/core/Makefile.objs
+++ b/hw/core/Makefile.objs
@@ -21,6 +21,7 @@ common-obj-$(CONFIG_SOFTMMU) += null-machine.o
common-obj-$(CONFIG_SOFTMMU) += loader.o
common-obj-$(CONFIG_SOFTMMU) += machine-hmp-cmds.o
common-obj-$(CONFIG_SOFTMMU) += numa.o
+common-obj-$(CONFIG_SOFTMMU) += clock-vmstate.o
obj-$(CONFIG_SOFTMMU) += machine-qmp-cmds.o
common-obj-$(CONFIG_EMPTY_SLOT) += empty_slot.o
diff --git a/include/hw/clock.h b/include/hw/clock.h
index 82a7f3c6982..f3e44e9460c 100644
--- a/include/hw/clock.h
+++ b/include/hw/clock.h
@@ -74,6 +74,15 @@ struct Clock {
QLIST_ENTRY(Clock) sibling;
};
+/*
+ * vmstate description entry to be added in device vmsd.
+ */
+extern const VMStateDescription vmstate_clock;
+#define VMSTATE_CLOCK(field, state) \
+ VMSTATE_CLOCK_V(field, state, 0)
+#define VMSTATE_CLOCK_V(field, state, version) \
+ VMSTATE_STRUCT_POINTER_V(field, state, version, vmstate_clock, Clock)
+
/**
* clock_setup_canonical_path:
* @clk: clock
diff --git a/hw/core/clock-vmstate.c b/hw/core/clock-vmstate.c
new file mode 100644
index 00000000000..260b13fc2c8
--- /dev/null
+++ b/hw/core/clock-vmstate.c
@@ -0,0 +1,25 @@
+/*
+ * Clock migration structure
+ *
+ * Copyright GreenSocs 2019-2020
+ *
+ * Authors:
+ * Damien Hedde
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or later.
+ * See the COPYING file in the top-level directory.
+ */
+
+#include "qemu/osdep.h"
+#include "migration/vmstate.h"
+#include "hw/clock.h"
+
+const VMStateDescription vmstate_clock = {
+ .name = "clock",
+ .version_id = 0,
+ .minimum_version_id = 0,
+ .fields = (VMStateField[]) {
+ VMSTATE_UINT64(period, Clock),
+ VMSTATE_END_OF_LIST()
+ }
+};
--
2.20.1
^ permalink raw reply related [flat|nested] 40+ messages in thread* [PULL 11/31] qdev: add clock input&output support to devices.
2020-04-30 11:51 [PULL 00/31] target-arm queue Peter Maydell
` (9 preceding siblings ...)
2020-04-30 11:51 ` [PULL 10/31] hw/core/clock-vmstate: define a vmstate entry for clock state Peter Maydell
@ 2020-04-30 11:51 ` Peter Maydell
2020-04-30 11:51 ` [PULL 12/31] qdev-clock: introduce an init array to ease the device construction Peter Maydell
` (20 subsequent siblings)
31 siblings, 0 replies; 40+ messages in thread
From: Peter Maydell @ 2020-04-30 11:51 UTC (permalink / raw)
To: qemu-devel
From: Damien Hedde <damien.hedde@greensocs.com>
Add functions to easily handle clocks with devices.
Clock inputs and outputs should be used to handle clock propagation
between devices.
The API is very similar the GPIO API.
This is based on the original work of Frederic Konrad.
Signed-off-by: Damien Hedde <damien.hedde@greensocs.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20200406135251.157596-4-damien.hedde@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
hw/core/Makefile.objs | 2 +-
tests/Makefile.include | 1 +
include/hw/qdev-clock.h | 104 +++++++++++++++++++++++++
include/hw/qdev-core.h | 12 +++
hw/core/qdev-clock.c | 168 ++++++++++++++++++++++++++++++++++++++++
hw/core/qdev.c | 12 +++
6 files changed, 298 insertions(+), 1 deletion(-)
create mode 100644 include/hw/qdev-clock.h
create mode 100644 hw/core/qdev-clock.c
diff --git a/hw/core/Makefile.objs b/hw/core/Makefile.objs
index 115df550874..1d540ed6e78 100644
--- a/hw/core/Makefile.objs
+++ b/hw/core/Makefile.objs
@@ -7,7 +7,7 @@ common-obj-y += hotplug.o
common-obj-y += vmstate-if.o
# irq.o needed for qdev GPIO handling:
common-obj-y += irq.o
-common-obj-y += clock.o
+common-obj-y += clock.o qdev-clock.o
common-obj-$(CONFIG_SOFTMMU) += reset.o
common-obj-$(CONFIG_SOFTMMU) += qdev-fw.o
diff --git a/tests/Makefile.include b/tests/Makefile.include
index 51de6762983..03a74b60f6b 100644
--- a/tests/Makefile.include
+++ b/tests/Makefile.include
@@ -439,6 +439,7 @@ tests/test-qdev-global-props$(EXESUF): tests/test-qdev-global-props.o \
hw/core/fw-path-provider.o \
hw/core/reset.o \
hw/core/vmstate-if.o \
+ hw/core/clock.o hw/core/qdev-clock.o \
$(test-qapi-obj-y)
tests/test-vmstate$(EXESUF): tests/test-vmstate.o \
migration/vmstate.o migration/vmstate-types.o migration/qemu-file.o \
diff --git a/include/hw/qdev-clock.h b/include/hw/qdev-clock.h
new file mode 100644
index 00000000000..b3b3a3e021c
--- /dev/null
+++ b/include/hw/qdev-clock.h
@@ -0,0 +1,104 @@
+/*
+ * Device's clock input and output
+ *
+ * Copyright GreenSocs 2016-2020
+ *
+ * Authors:
+ * Frederic Konrad
+ * Damien Hedde
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or later.
+ * See the COPYING file in the top-level directory.
+ */
+
+#ifndef QDEV_CLOCK_H
+#define QDEV_CLOCK_H
+
+#include "hw/clock.h"
+
+/**
+ * qdev_init_clock_in:
+ * @dev: the device to add an input clock to
+ * @name: the name of the clock (can't be NULL).
+ * @callback: optional callback to be called on update or NULL.
+ * @opaque: argument for the callback
+ * @returns: a pointer to the newly added clock
+ *
+ * Add an input clock to device @dev as a clock named @name.
+ * This adds a child<> property.
+ * The callback will be called with @opaque as opaque parameter.
+ */
+Clock *qdev_init_clock_in(DeviceState *dev, const char *name,
+ ClockCallback *callback, void *opaque);
+
+/**
+ * qdev_init_clock_out:
+ * @dev: the device to add an output clock to
+ * @name: the name of the clock (can't be NULL).
+ * @returns: a pointer to the newly added clock
+ *
+ * Add an output clock to device @dev as a clock named @name.
+ * This adds a child<> property.
+ */
+Clock *qdev_init_clock_out(DeviceState *dev, const char *name);
+
+/**
+ * qdev_get_clock_in:
+ * @dev: the device which has the clock
+ * @name: the name of the clock (can't be NULL).
+ * @returns: a pointer to the clock
+ *
+ * Get the input clock @name from @dev or NULL if does not exist.
+ */
+Clock *qdev_get_clock_in(DeviceState *dev, const char *name);
+
+/**
+ * qdev_get_clock_out:
+ * @dev: the device which has the clock
+ * @name: the name of the clock (can't be NULL).
+ * @returns: a pointer to the clock
+ *
+ * Get the output clock @name from @dev or NULL if does not exist.
+ */
+Clock *qdev_get_clock_out(DeviceState *dev, const char *name);
+
+/**
+ * qdev_connect_clock_in:
+ * @dev: a device
+ * @name: the name of an input clock in @dev
+ * @source: the source clock (an output clock of another device for example)
+ *
+ * Set the source clock of input clock @name of device @dev to @source.
+ * @source period update will be propagated to @name clock.
+ */
+static inline void qdev_connect_clock_in(DeviceState *dev, const char *name,
+ Clock *source)
+{
+ clock_set_source(qdev_get_clock_in(dev, name), source);
+}
+
+/**
+ * qdev_alias_clock:
+ * @dev: the device which has the clock
+ * @name: the name of the clock in @dev (can't be NULL)
+ * @alias_dev: the device to add the clock
+ * @alias_name: the name of the clock in @container
+ * @returns: a pointer to the clock
+ *
+ * Add a clock @alias_name in @alias_dev which is an alias of the clock @name
+ * in @dev. The direction _in_ or _out_ will the same as the original.
+ * An alias clock must not be modified or used by @alias_dev and should
+ * typically be only only for device composition purpose.
+ */
+Clock *qdev_alias_clock(DeviceState *dev, const char *name,
+ DeviceState *alias_dev, const char *alias_name);
+
+/**
+ * qdev_finalize_clocklist:
+ * @dev: the device being finalized
+ *
+ * Clear the clocklist from @dev. Only used internally in qdev.
+ */
+void qdev_finalize_clocklist(DeviceState *dev);
+
+#endif /* QDEV_CLOCK_H */
diff --git a/include/hw/qdev-core.h b/include/hw/qdev-core.h
index 1405b8a990a..d87d989e72a 100644
--- a/include/hw/qdev-core.h
+++ b/include/hw/qdev-core.h
@@ -149,6 +149,17 @@ struct NamedGPIOList {
QLIST_ENTRY(NamedGPIOList) node;
};
+typedef struct Clock Clock;
+typedef struct NamedClockList NamedClockList;
+
+struct NamedClockList {
+ char *name;
+ Clock *clock;
+ bool output;
+ bool alias;
+ QLIST_ENTRY(NamedClockList) node;
+};
+
/**
* DeviceState:
* @realized: Indicates whether the device has been fully constructed.
@@ -171,6 +182,7 @@ struct DeviceState {
bool allow_unplug_during_migration;
BusState *parent_bus;
QLIST_HEAD(, NamedGPIOList) gpios;
+ QLIST_HEAD(, NamedClockList) clocks;
QLIST_HEAD(, BusState) child_bus;
int num_child_bus;
int instance_id_alias;
diff --git a/hw/core/qdev-clock.c b/hw/core/qdev-clock.c
new file mode 100644
index 00000000000..62035aef830
--- /dev/null
+++ b/hw/core/qdev-clock.c
@@ -0,0 +1,168 @@
+/*
+ * Device's clock input and output
+ *
+ * Copyright GreenSocs 2016-2020
+ *
+ * Authors:
+ * Frederic Konrad
+ * Damien Hedde
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or later.
+ * See the COPYING file in the top-level directory.
+ */
+
+#include "qemu/osdep.h"
+#include "hw/qdev-clock.h"
+#include "hw/qdev-core.h"
+#include "qapi/error.h"
+
+/*
+ * qdev_init_clocklist:
+ * Add a new clock in a device
+ */
+static NamedClockList *qdev_init_clocklist(DeviceState *dev, const char *name,
+ bool output, Clock *clk)
+{
+ NamedClockList *ncl;
+
+ /*
+ * Clock must be added before realize() so that we can compute the
+ * clock's canonical path during device_realize().
+ */
+ assert(!dev->realized);
+
+ /*
+ * The ncl structure is freed by qdev_finalize_clocklist() which will
+ * be called during @dev's device_finalize().
+ */
+ ncl = g_new0(NamedClockList, 1);
+ ncl->name = g_strdup(name);
+ ncl->output = output;
+ ncl->alias = (clk != NULL);
+
+ /*
+ * Trying to create a clock whose name clashes with some other
+ * clock or property is a bug in the caller and we will abort().
+ */
+ if (clk == NULL) {
+ clk = CLOCK(object_new(TYPE_CLOCK));
+ object_property_add_child(OBJECT(dev), name, OBJECT(clk), &error_abort);
+ if (output) {
+ /*
+ * Remove object_new()'s initial reference.
+ * Note that for inputs, the reference created by object_new()
+ * will be deleted in qdev_finalize_clocklist().
+ */
+ object_unref(OBJECT(clk));
+ }
+ } else {
+ object_property_add_link(OBJECT(dev), name,
+ object_get_typename(OBJECT(clk)),
+ (Object **) &ncl->clock,
+ NULL, OBJ_PROP_LINK_STRONG, &error_abort);
+ }
+
+ ncl->clock = clk;
+
+ QLIST_INSERT_HEAD(&dev->clocks, ncl, node);
+ return ncl;
+}
+
+void qdev_finalize_clocklist(DeviceState *dev)
+{
+ /* called by @dev's device_finalize() */
+ NamedClockList *ncl, *ncl_next;
+
+ QLIST_FOREACH_SAFE(ncl, &dev->clocks, node, ncl_next) {
+ QLIST_REMOVE(ncl, node);
+ if (!ncl->output && !ncl->alias) {
+ /*
+ * We kept a reference on the input clock to ensure it lives up to
+ * this point so we can safely remove the callback.
+ * It avoids having a callback to a deleted object if ncl->clock
+ * is still referenced somewhere else (eg: by a clock output).
+ */
+ clock_clear_callback(ncl->clock);
+ object_unref(OBJECT(ncl->clock));
+ }
+ g_free(ncl->name);
+ g_free(ncl);
+ }
+}
+
+Clock *qdev_init_clock_out(DeviceState *dev, const char *name)
+{
+ NamedClockList *ncl;
+
+ assert(name);
+
+ ncl = qdev_init_clocklist(dev, name, true, NULL);
+
+ return ncl->clock;
+}
+
+Clock *qdev_init_clock_in(DeviceState *dev, const char *name,
+ ClockCallback *callback, void *opaque)
+{
+ NamedClockList *ncl;
+
+ assert(name);
+
+ ncl = qdev_init_clocklist(dev, name, false, NULL);
+
+ if (callback) {
+ clock_set_callback(ncl->clock, callback, opaque);
+ }
+ return ncl->clock;
+}
+
+static NamedClockList *qdev_get_clocklist(DeviceState *dev, const char *name)
+{
+ NamedClockList *ncl;
+
+ QLIST_FOREACH(ncl, &dev->clocks, node) {
+ if (strcmp(name, ncl->name) == 0) {
+ return ncl;
+ }
+ }
+
+ return NULL;
+}
+
+Clock *qdev_get_clock_in(DeviceState *dev, const char *name)
+{
+ NamedClockList *ncl;
+
+ assert(name);
+
+ ncl = qdev_get_clocklist(dev, name);
+ assert(!ncl->output);
+
+ return ncl->clock;
+}
+
+Clock *qdev_get_clock_out(DeviceState *dev, const char *name)
+{
+ NamedClockList *ncl;
+
+ assert(name);
+
+ ncl = qdev_get_clocklist(dev, name);
+ assert(ncl->output);
+
+ return ncl->clock;
+}
+
+Clock *qdev_alias_clock(DeviceState *dev, const char *name,
+ DeviceState *alias_dev, const char *alias_name)
+{
+ NamedClockList *ncl;
+
+ assert(name && alias_name);
+
+ ncl = qdev_get_clocklist(dev, name);
+
+ qdev_init_clocklist(alias_dev, alias_name, ncl->output, ncl->clock);
+
+ return ncl->clock;
+}
diff --git a/hw/core/qdev.c b/hw/core/qdev.c
index 85f062def72..dd77a560672 100644
--- a/hw/core/qdev.c
+++ b/hw/core/qdev.c
@@ -37,6 +37,7 @@
#include "hw/qdev-properties.h"
#include "hw/boards.h"
#include "hw/sysbus.h"
+#include "hw/qdev-clock.h"
#include "migration/vmstate.h"
#include "trace.h"
@@ -855,6 +856,7 @@ static void device_set_realized(Object *obj, bool value, Error **errp)
DeviceClass *dc = DEVICE_GET_CLASS(dev);
HotplugHandler *hotplug_ctrl;
BusState *bus;
+ NamedClockList *ncl;
Error *local_err = NULL;
bool unattached_parent = false;
static int unattached_count;
@@ -902,6 +904,13 @@ static void device_set_realized(Object *obj, bool value, Error **errp)
*/
g_free(dev->canonical_path);
dev->canonical_path = object_get_canonical_path(OBJECT(dev));
+ QLIST_FOREACH(ncl, &dev->clocks, node) {
+ if (ncl->alias) {
+ continue;
+ } else {
+ clock_setup_canonical_path(ncl->clock);
+ }
+ }
if (qdev_get_vmsd(dev)) {
if (vmstate_register_with_alias_id(VMSTATE_IF(dev),
@@ -1025,6 +1034,7 @@ static void device_initfn(Object *obj)
dev->allow_unplug_during_migration = false;
QLIST_INIT(&dev->gpios);
+ QLIST_INIT(&dev->clocks);
}
static void device_post_init(Object *obj)
@@ -1054,6 +1064,8 @@ static void device_finalize(Object *obj)
*/
}
+ qdev_finalize_clocklist(dev);
+
/* Only send event if the device had been completely realized */
if (dev->pending_deleted_event) {
g_assert(dev->canonical_path);
--
2.20.1
^ permalink raw reply related [flat|nested] 40+ messages in thread* [PULL 12/31] qdev-clock: introduce an init array to ease the device construction
2020-04-30 11:51 [PULL 00/31] target-arm queue Peter Maydell
` (10 preceding siblings ...)
2020-04-30 11:51 ` [PULL 11/31] qdev: add clock input&output support to devices Peter Maydell
@ 2020-04-30 11:51 ` Peter Maydell
2020-04-30 11:51 ` [PULL 13/31] docs/clocks: add device's clock documentation Peter Maydell
` (19 subsequent siblings)
31 siblings, 0 replies; 40+ messages in thread
From: Peter Maydell @ 2020-04-30 11:51 UTC (permalink / raw)
To: qemu-devel
From: Damien Hedde <damien.hedde@greensocs.com>
Introduce a function and macro helpers to setup several clocks
in a device from a static array description.
An element of the array describes the clock (name and direction) as
well as the related callback and an optional offset to store the
created object pointer in the device state structure.
The array must be terminated by a special element QDEV_CLOCK_END.
This is based on the original work of Frederic Konrad.
Signed-off-by: Damien Hedde <damien.hedde@greensocs.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20200406135251.157596-5-damien.hedde@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
include/hw/qdev-clock.h | 55 +++++++++++++++++++++++++++++++++++++++++
hw/core/qdev-clock.c | 17 +++++++++++++
2 files changed, 72 insertions(+)
diff --git a/include/hw/qdev-clock.h b/include/hw/qdev-clock.h
index b3b3a3e021c..a340f65ff90 100644
--- a/include/hw/qdev-clock.h
+++ b/include/hw/qdev-clock.h
@@ -101,4 +101,59 @@ Clock *qdev_alias_clock(DeviceState *dev, const char *name,
*/
void qdev_finalize_clocklist(DeviceState *dev);
+/**
+ * ClockPortInitElem:
+ * @name: name of the clock (can't be NULL)
+ * @output: indicates whether the clock is input or output
+ * @callback: for inputs, optional callback to be called on clock's update
+ * with device as opaque
+ * @offset: optional offset to store the ClockIn or ClockOut pointer in device
+ * state structure (0 means unused)
+ */
+struct ClockPortInitElem {
+ const char *name;
+ bool is_output;
+ ClockCallback *callback;
+ size_t offset;
+};
+
+#define clock_offset_value(devstate, field) \
+ (offsetof(devstate, field) + \
+ type_check(Clock *, typeof_field(devstate, field)))
+
+#define QDEV_CLOCK(out_not_in, devstate, field, cb) { \
+ .name = (stringify(field)), \
+ .is_output = out_not_in, \
+ .callback = cb, \
+ .offset = clock_offset_value(devstate, field), \
+}
+
+/**
+ * QDEV_CLOCK_(IN|OUT):
+ * @devstate: structure type. @dev argument of qdev_init_clocks below must be
+ * a pointer to that same type.
+ * @field: a field in @_devstate (must be Clock*)
+ * @callback: (for input only) callback (or NULL) to be called with the device
+ * state as argument
+ *
+ * The name of the clock will be derived from @field
+ */
+#define QDEV_CLOCK_IN(devstate, field, callback) \
+ QDEV_CLOCK(false, devstate, field, callback)
+
+#define QDEV_CLOCK_OUT(devstate, field) \
+ QDEV_CLOCK(true, devstate, field, NULL)
+
+#define QDEV_CLOCK_END { .name = NULL }
+
+typedef struct ClockPortInitElem ClockPortInitArray[];
+
+/**
+ * qdev_init_clocks:
+ * @dev: the device to add clocks to
+ * @clocks: a QDEV_CLOCK_END-terminated array which contains the
+ * clocks information.
+ */
+void qdev_init_clocks(DeviceState *dev, const ClockPortInitArray clocks);
+
#endif /* QDEV_CLOCK_H */
diff --git a/hw/core/qdev-clock.c b/hw/core/qdev-clock.c
index 62035aef830..a94cc444379 100644
--- a/hw/core/qdev-clock.c
+++ b/hw/core/qdev-clock.c
@@ -116,6 +116,23 @@ Clock *qdev_init_clock_in(DeviceState *dev, const char *name,
return ncl->clock;
}
+void qdev_init_clocks(DeviceState *dev, const ClockPortInitArray clocks)
+{
+ const struct ClockPortInitElem *elem;
+
+ for (elem = &clocks[0]; elem->name != NULL; elem++) {
+ Clock **clkp;
+ /* offset cannot be inside the DeviceState part */
+ assert(elem->offset > sizeof(DeviceState));
+ clkp = (Clock **)(((void *) dev) + elem->offset);
+ if (elem->is_output) {
+ *clkp = qdev_init_clock_out(dev, elem->name);
+ } else {
+ *clkp = qdev_init_clock_in(dev, elem->name, elem->callback, dev);
+ }
+ }
+}
+
static NamedClockList *qdev_get_clocklist(DeviceState *dev, const char *name)
{
NamedClockList *ncl;
--
2.20.1
^ permalink raw reply related [flat|nested] 40+ messages in thread* [PULL 13/31] docs/clocks: add device's clock documentation
2020-04-30 11:51 [PULL 00/31] target-arm queue Peter Maydell
` (11 preceding siblings ...)
2020-04-30 11:51 ` [PULL 12/31] qdev-clock: introduce an init array to ease the device construction Peter Maydell
@ 2020-04-30 11:51 ` Peter Maydell
2020-04-30 11:51 ` [PULL 14/31] hw/misc/zynq_slcr: add clock generation for uarts Peter Maydell
` (18 subsequent siblings)
31 siblings, 0 replies; 40+ messages in thread
From: Peter Maydell @ 2020-04-30 11:51 UTC (permalink / raw)
To: qemu-devel
Add the documentation about the clock inputs and outputs in devices.
This is based on the original work of Frederic Konrad.
Signed-off-by: Damien Hedde <damien.hedde@greensocs.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20200406135251.157596-6-damien.hedde@greensocs.com
[PMM: Editing pass for minor grammar, style and Sphinx
formatting fixes]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
docs/devel/clocks.rst | 391 ++++++++++++++++++++++++++++++++++++++++++
docs/devel/index.rst | 1 +
2 files changed, 392 insertions(+)
create mode 100644 docs/devel/clocks.rst
diff --git a/docs/devel/clocks.rst b/docs/devel/clocks.rst
new file mode 100644
index 00000000000..e5da28e2111
--- /dev/null
+++ b/docs/devel/clocks.rst
@@ -0,0 +1,391 @@
+Modelling a clock tree in QEMU
+==============================
+
+What are clocks?
+----------------
+
+Clocks are QOM objects developed for the purpose of modelling the
+distribution of clocks in QEMU.
+
+They allow us to model the clock distribution of a platform and detect
+configuration errors in the clock tree such as badly configured PLL, clock
+source selection or disabled clock.
+
+The object is *Clock* and its QOM name is ``clock`` (in C code, the macro
+``TYPE_CLOCK``).
+
+Clocks are typically used with devices where they are used to model inputs
+and outputs. They are created in a similar way to GPIOs. Inputs and outputs
+of different devices can be connected together.
+
+In these cases a Clock object is a child of a Device object, but this
+is not a requirement. Clocks can be independent of devices. For
+example it is possible to create a clock outside of any device to
+model the main clock source of a machine.
+
+Here is an example of clocks::
+
+ +---------+ +----------------------+ +--------------+
+ | Clock 1 | | Device B | | Device C |
+ | | | +-------+ +-------+ | | +-------+ |
+ | |>>-+-->>|Clock 2| |Clock 3|>>--->>|Clock 6| |
+ +---------+ | | | (in) | | (out) | | | | (in) | |
+ | | +-------+ +-------+ | | +-------+ |
+ | | +-------+ | +--------------+
+ | | |Clock 4|>>
+ | | | (out) | | +--------------+
+ | | +-------+ | | Device D |
+ | | +-------+ | | +-------+ |
+ | | |Clock 5|>>--->>|Clock 7| |
+ | | | (out) | | | | (in) | |
+ | | +-------+ | | +-------+ |
+ | +----------------------+ | |
+ | | +-------+ |
+ +----------------------------->>|Clock 8| |
+ | | (in) | |
+ | +-------+ |
+ +--------------+
+
+Clocks are defined in the ``include/hw/clock.h`` header and device
+related functions are defined in the ``include/hw/qdev-clock.h``
+header.
+
+The clock state
+---------------
+
+The state of a clock is its period; it is stored as an integer
+representing it in units of 2 :sup:`-32` ns. The special value of 0 is used to
+represent the clock being inactive or gated. The clocks do not model
+the signal itself (pin toggling) or other properties such as the duty
+cycle.
+
+All clocks contain this state: outputs as well as inputs. This allows
+the current period of a clock to be fetched at any time. When a clock
+is updated, the value is immediately propagated to all connected
+clocks in the tree.
+
+To ease interaction with clocks, helpers with a unit suffix are defined for
+every clock state setter or getter. The suffixes are:
+
+- ``_ns`` for handling periods in nanoseconds
+- ``_hz`` for handling frequencies in hertz
+
+The 0 period value is converted to 0 in hertz and vice versa. 0 always means
+that the clock is disabled.
+
+Adding a new clock
+------------------
+
+Adding clocks to a device must be done during the init method of the Device
+instance.
+
+To add an input clock to a device, the function ``qdev_init_clock_in()``
+must be used. It takes the name, a callback and an opaque parameter
+for the callback (this will be explained in a following section).
+Output is simpler; only the name is required. Typically::
+
+ qdev_init_clock_in(DEVICE(dev), "clk_in", clk_in_callback, dev);
+ qdev_init_clock_out(DEVICE(dev), "clk_out");
+
+Both functions return the created Clock pointer, which should be saved in the
+device's state structure for further use.
+
+These objects will be automatically deleted by the QOM reference mechanism.
+
+Note that it is possible to create a static array describing clock inputs and
+outputs. The function ``qdev_init_clocks()`` must be called with the array as
+parameter to initialize the clocks: it has the same behaviour as calling the
+``qdev_init_clock_in/out()`` for each clock in the array. To ease the array
+construction, some macros are defined in ``include/hw/qdev-clock.h``.
+As an example, the following creates 2 clocks to a device: one input and one
+output.
+
+.. code-block:: c
+
+ /* device structure containing pointers to the clock objects */
+ typedef struct MyDeviceState {
+ DeviceState parent_obj;
+ Clock *clk_in;
+ Clock *clk_out;
+ } MyDeviceState;
+
+ /*
+ * callback for the input clock (see "Callback on input clock
+ * change" section below for more information).
+ */
+ static void clk_in_callback(void *opaque);
+
+ /*
+ * static array describing clocks:
+ * + a clock input named "clk_in", whose pointer is stored in
+ * the clk_in field of a MyDeviceState structure with callback
+ * clk_in_callback.
+ * + a clock output named "clk_out" whose pointer is stored in
+ * the clk_out field of a MyDeviceState structure.
+ */
+ static const ClockPortInitArray mydev_clocks = {
+ QDEV_CLOCK_IN(MyDeviceState, clk_in, clk_in_callback),
+ QDEV_CLOCK_OUT(MyDeviceState, clk_out),
+ QDEV_CLOCK_END
+ };
+
+ /* device initialization function */
+ static void mydev_init(Object *obj)
+ {
+ /* cast to MyDeviceState */
+ MyDeviceState *mydev = MYDEVICE(obj);
+ /* create and fill the pointer fields in the MyDeviceState */
+ qdev_init_clocks(mydev, mydev_clocks);
+ [...]
+ }
+
+An alternative way to create a clock is to simply call
+``object_new(TYPE_CLOCK)``. In that case the clock will neither be an
+input nor an output of a device. After the whole QOM hierarchy of the
+clock has been set ``clock_setup_canonical_path()`` should be called.
+
+At creation, the period of the clock is 0: the clock is disabled. You can
+change it using ``clock_set_ns()`` or ``clock_set_hz()``.
+
+Note that if you are creating a clock with a fixed period which will never
+change (for example the main clock source of a board), then you'll have
+nothing else to do. This value will be propagated to other clocks when
+connecting the clocks together and devices will fetch the right value during
+the first reset.
+
+Retrieving clocks from a device
+-------------------------------
+
+``qdev_get_clock_in()`` and ``dev_get_clock_out()`` are available to
+get the clock inputs or outputs of a device. For example:
+
+.. code-block:: c
+
+ Clock *clk = qdev_get_clock_in(DEVICE(mydev), "clk_in");
+
+or:
+
+.. code-block:: c
+
+ Clock *clk = qdev_get_clock_out(DEVICE(mydev), "clk_out");
+
+Connecting two clocks together
+------------------------------
+
+To connect two clocks together, use the ``clock_set_source()`` function.
+Given two clocks ``clk1``, and ``clk2``, ``clock_set_source(clk2, clk1);``
+configures ``clk2`` to follow the ``clk1`` period changes. Every time ``clk1``
+is updated, ``clk2`` will be updated too.
+
+When connecting clock between devices, prefer using the
+``qdev_connect_clock_in()`` function to set the source of an input
+device clock. For example, to connect the input clock ``clk2`` of
+``devB`` to the output clock ``clk1`` of ``devA``, do:
+
+.. code-block:: c
+
+ qdev_connect_clock_in(devB, "clk2", qdev_get_clock_out(devA, "clk1"))
+
+We used ``qdev_get_clock_out()`` above, but any clock can drive an
+input clock, even another input clock. The following diagram shows
+some examples of connections. Note also that a clock can drive several
+other clocks.
+
+::
+
+ +------------+ +--------------------------------------------------+
+ | Device A | | Device B |
+ | | | +---------------------+ |
+ | | | | Device C | |
+ | +-------+ | | +-------+ | +-------+ +-------+ | +-------+ |
+ | |Clock 1|>>-->>|Clock 2|>>+-->>|Clock 3| |Clock 5|>>>>|Clock 6|>>
+ | | (out) | | | | (in) | | | | (in) | | (out) | | | (out) | |
+ | +-------+ | | +-------+ | | +-------+ +-------+ | +-------+ |
+ +------------+ | | +---------------------+ |
+ | | |
+ | | +--------------+ |
+ | | | Device D | |
+ | | | +-------+ | |
+ | +-->>|Clock 4| | |
+ | | | (in) | | |
+ | | +-------+ | |
+ | +--------------+ |
+ +--------------------------------------------------+
+
+In the above example, when *Clock 1* is updated by *Device A*, three
+clocks get the new clock period value: *Clock 2*, *Clock 3* and *Clock 4*.
+
+It is not possible to disconnect a clock or to change the clock connection
+after it is connected.
+
+Unconnected input clocks
+------------------------
+
+A newly created input clock is disabled (period of 0). This means the
+clock will be considered as disabled until the period is updated. If
+the clock remains unconnected it will always keep its initial value
+of 0. If this is not the desired behaviour, ``clock_set()``,
+``clock_set_ns()`` or ``clock_set_hz()`` should be called on the Clock
+object during device instance init. For example:
+
+.. code-block:: c
+
+ clk = qdev_init_clock_in(DEVICE(dev), "clk-in", clk_in_callback,
+ dev);
+ /* set initial value to 10ns / 100MHz */
+ clock_set_ns(clk, 10);
+
+Fetching clock frequency/period
+-------------------------------
+
+To get the current state of a clock, use the functions ``clock_get()``,
+``clock_get_ns()`` or ``clock_get_hz()``.
+
+It is also possible to register a callback on clock frequency changes.
+Here is an example:
+
+.. code-block:: c
+
+ void clock_callback(void *opaque) {
+ MyDeviceState *s = (MyDeviceState *) opaque;
+ /*
+ * 'opaque' is the argument passed to qdev_init_clock_in();
+ * usually this will be the device state pointer.
+ */
+
+ /* do something with the new period */
+ fprintf(stdout, "device new period is %" PRIu64 "ns\n",
+ clock_get_ns(dev->my_clk_input));
+ }
+
+Changing a clock period
+-----------------------
+
+A device can change its outputs using the ``clock_update()``,
+``clock_update_ns()`` or ``clock_update_hz()`` function. It will trigger
+updates on every connected input.
+
+For example, let's say that we have an output clock *clkout* and we
+have a pointer to it in the device state because we did the following
+in init phase:
+
+.. code-block:: c
+
+ dev->clkout = qdev_init_clock_out(DEVICE(dev), "clkout");
+
+Then at any time (apart from the cases listed below), it is possible to
+change the clock value by doing:
+
+.. code-block:: c
+
+ clock_update_hz(dev->clkout, 1000 * 1000 * 1000); /* 1GHz */
+
+Because updating a clock may trigger any side effects through
+connected clocks and their callbacks, this operation must be done
+while holding the qemu io lock.
+
+For the same reason, one can update clocks only when it is allowed to have
+side effects on other objects. In consequence, it is forbidden:
+
+* during migration,
+* and in the enter phase of reset.
+
+Note that calling ``clock_update[_ns|_hz]()`` is equivalent to calling
+``clock_set[_ns|_hz]()`` (with the same arguments) then
+``clock_propagate()`` on the clock. Thus, setting the clock value can
+be separated from triggering the side-effects. This is often required
+to factorize code to handle reset and migration in devices.
+
+Aliasing clocks
+---------------
+
+Sometimes, one needs to forward, or inherit, a clock from another
+device. Typically, when doing device composition, a device might
+expose a sub-device's clock without interfering with it. The function
+``qdev_alias_clock()`` can be used to achieve this behaviour. Note
+that it is possible to expose the clock under a different name.
+``qdev_alias_clock()`` works for both input and output clocks.
+
+For example, if device B is a child of device A,
+``device_a_instance_init()`` may do something like this:
+
+.. code-block:: c
+
+ void device_a_instance_init(Object *obj)
+ {
+ AState *A = DEVICE_A(obj);
+ BState *B;
+ /* create object B as child of A */
+ [...]
+ qdev_alias_clock(B, "clk", A, "b_clk");
+ /*
+ * Now A has a clock "b_clk" which is an alias to
+ * the clock "clk" of its child B.
+ */
+ }
+
+This function does not return any clock object. The new clock has the
+same direction (input or output) as the original one. This function
+only adds a link to the existing clock. In the above example, object B
+remains the only object allowed to use the clock and device A must not
+try to change the clock period or set a callback to the clock. This
+diagram describes the example with an input clock::
+
+ +--------------------------+
+ | Device A |
+ | +--------------+ |
+ | | Device B | |
+ | | +-------+ | |
+ >>"b_clk">>>| "clk" | | |
+ | (in) | | (in) | | |
+ | | +-------+ | |
+ | +--------------+ |
+ +--------------------------+
+
+Migration
+---------
+
+Clock state is not migrated automatically. Every device must handle its
+clock migration. Alias clocks must not be migrated.
+
+To ensure clock states are restored correctly during migration, there
+are two solutions.
+
+Clock states can be migrated by adding an entry into the device
+vmstate description. You should use the ``VMSTATE_CLOCK`` macro for this.
+This is typically used to migrate an input clock state. For example:
+
+.. code-block:: c
+
+ MyDeviceState {
+ DeviceState parent_obj;
+ [...] /* some fields */
+ Clock *clk;
+ };
+
+ VMStateDescription my_device_vmstate = {
+ .name = "my_device",
+ .fields = (VMStateField[]) {
+ [...], /* other migrated fields */
+ VMSTATE_CLOCK(clk, MyDeviceState),
+ VMSTATE_END_OF_LIST()
+ }
+ };
+
+The second solution is to restore the clock state using information already
+at our disposal. This can be used to restore output clock states using the
+device state. The functions ``clock_set[_ns|_hz]()`` can be used during the
+``post_load()`` migration callback.
+
+When adding clock support to an existing device, if you care about
+migration compatibility you will need to be careful, as simply adding
+a ``VMSTATE_CLOCK()`` line will break compatibility. Instead, you can
+put the ``VMSTATE_CLOCK()`` line into a vmstate subsection with a
+suitable ``needed`` function, and use ``clock_set()`` in a
+``pre_load()`` function to set the default value that will be used if
+the source virtual machine in the migration does not send the clock
+state.
+
+Care should be taken not to use ``clock_update[_ns|_hz]()`` or
+``clock_propagate()`` during the whole migration procedure because it
+will trigger side effects to other devices in an unknown state.
diff --git a/docs/devel/index.rst b/docs/devel/index.rst
index a9e1200dff3..bb8238c5d6d 100644
--- a/docs/devel/index.rst
+++ b/docs/devel/index.rst
@@ -27,3 +27,4 @@ Contents:
bitops
reset
s390-dasd-ipl
+ clocks
--
2.20.1
^ permalink raw reply related [flat|nested] 40+ messages in thread* [PULL 14/31] hw/misc/zynq_slcr: add clock generation for uarts
2020-04-30 11:51 [PULL 00/31] target-arm queue Peter Maydell
` (12 preceding siblings ...)
2020-04-30 11:51 ` [PULL 13/31] docs/clocks: add device's clock documentation Peter Maydell
@ 2020-04-30 11:51 ` Peter Maydell
2020-04-30 11:51 ` [PULL 15/31] hw/char/cadence_uart: add clock support Peter Maydell
` (17 subsequent siblings)
31 siblings, 0 replies; 40+ messages in thread
From: Peter Maydell @ 2020-04-30 11:51 UTC (permalink / raw)
To: qemu-devel
From: Damien Hedde <damien.hedde@greensocs.com>
Add some clocks to zynq_slcr
+ the main input clock (ps_clk)
+ the reference clock outputs for each uart (uart0 & 1)
This commit also transitional the slcr to multi-phase reset as it is
required to initialize the clocks correctly.
The clock frequencies are computed using the internal pll & uart configuration
registers and the input ps_clk frequency.
Signed-off-by: Damien Hedde <damien.hedde@greensocs.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20200406135251.157596-7-damien.hedde@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
hw/misc/zynq_slcr.c | 172 ++++++++++++++++++++++++++++++++++++++++++--
1 file changed, 168 insertions(+), 4 deletions(-)
diff --git a/hw/misc/zynq_slcr.c b/hw/misc/zynq_slcr.c
index b9a38272d96..f7472d1f3c0 100644
--- a/hw/misc/zynq_slcr.c
+++ b/hw/misc/zynq_slcr.c
@@ -22,6 +22,7 @@
#include "qemu/log.h"
#include "qemu/module.h"
#include "hw/registerfields.h"
+#include "hw/qdev-clock.h"
#ifndef ZYNQ_SLCR_ERR_DEBUG
#define ZYNQ_SLCR_ERR_DEBUG 0
@@ -45,6 +46,12 @@ REG32(LOCKSTA, 0x00c)
REG32(ARM_PLL_CTRL, 0x100)
REG32(DDR_PLL_CTRL, 0x104)
REG32(IO_PLL_CTRL, 0x108)
+/* fields for [ARM|DDR|IO]_PLL_CTRL registers */
+ FIELD(xxx_PLL_CTRL, PLL_RESET, 0, 1)
+ FIELD(xxx_PLL_CTRL, PLL_PWRDWN, 1, 1)
+ FIELD(xxx_PLL_CTRL, PLL_BYPASS_QUAL, 3, 1)
+ FIELD(xxx_PLL_CTRL, PLL_BYPASS_FORCE, 4, 1)
+ FIELD(xxx_PLL_CTRL, PLL_FPDIV, 12, 7)
REG32(PLL_STATUS, 0x10c)
REG32(ARM_PLL_CFG, 0x110)
REG32(DDR_PLL_CFG, 0x114)
@@ -64,6 +71,10 @@ REG32(SMC_CLK_CTRL, 0x148)
REG32(LQSPI_CLK_CTRL, 0x14c)
REG32(SDIO_CLK_CTRL, 0x150)
REG32(UART_CLK_CTRL, 0x154)
+ FIELD(UART_CLK_CTRL, CLKACT0, 0, 1)
+ FIELD(UART_CLK_CTRL, CLKACT1, 1, 1)
+ FIELD(UART_CLK_CTRL, SRCSEL, 4, 2)
+ FIELD(UART_CLK_CTRL, DIVISOR, 8, 6)
REG32(SPI_CLK_CTRL, 0x158)
REG32(CAN_CLK_CTRL, 0x15c)
REG32(CAN_MIOCLK_CTRL, 0x160)
@@ -179,11 +190,127 @@ typedef struct ZynqSLCRState {
MemoryRegion iomem;
uint32_t regs[ZYNQ_SLCR_NUM_REGS];
+
+ Clock *ps_clk;
+ Clock *uart0_ref_clk;
+ Clock *uart1_ref_clk;
} ZynqSLCRState;
-static void zynq_slcr_reset(DeviceState *d)
+/*
+ * return the output frequency of ARM/DDR/IO pll
+ * using input frequency and PLL_CTRL register
+ */
+static uint64_t zynq_slcr_compute_pll(uint64_t input, uint32_t ctrl_reg)
{
- ZynqSLCRState *s = ZYNQ_SLCR(d);
+ uint32_t mult = ((ctrl_reg & R_xxx_PLL_CTRL_PLL_FPDIV_MASK) >>
+ R_xxx_PLL_CTRL_PLL_FPDIV_SHIFT);
+
+ /* first, check if pll is bypassed */
+ if (ctrl_reg & R_xxx_PLL_CTRL_PLL_BYPASS_FORCE_MASK) {
+ return input;
+ }
+
+ /* is pll disabled ? */
+ if (ctrl_reg & (R_xxx_PLL_CTRL_PLL_RESET_MASK |
+ R_xxx_PLL_CTRL_PLL_PWRDWN_MASK)) {
+ return 0;
+ }
+
+ /* frequency multiplier -> period division */
+ return input / mult;
+}
+
+/*
+ * return the output period of a clock given:
+ * + the periods in an array corresponding to input mux selector
+ * + the register xxx_CLK_CTRL value
+ * + enable bit index in ctrl register
+ *
+ * This function makes the assumption that the ctrl_reg value is organized as
+ * follows:
+ * + bits[13:8] clock frequency divisor
+ * + bits[5:4] clock mux selector (index in array)
+ * + bits[index] clock enable
+ */
+static uint64_t zynq_slcr_compute_clock(const uint64_t periods[],
+ uint32_t ctrl_reg,
+ unsigned index)
+{
+ uint32_t srcsel = extract32(ctrl_reg, 4, 2); /* bits [5:4] */
+ uint32_t divisor = extract32(ctrl_reg, 8, 6); /* bits [13:8] */
+
+ /* first, check if clock is disabled */
+ if (((ctrl_reg >> index) & 1u) == 0) {
+ return 0;
+ }
+
+ /*
+ * according to the Zynq technical ref. manual UG585 v1.12.2 in
+ * Clocks chapter, section 25.10.1 page 705:
+ * "The 6-bit divider provides a divide range of 1 to 63"
+ * We follow here what is implemented in linux kernel and consider
+ * the 0 value as a bypass (no division).
+ */
+ /* frequency divisor -> period multiplication */
+ return periods[srcsel] * (divisor ? divisor : 1u);
+}
+
+/*
+ * macro helper around zynq_slcr_compute_clock to avoid repeating
+ * the register name.
+ */
+#define ZYNQ_COMPUTE_CLK(state, plls, reg, enable_field) \
+ zynq_slcr_compute_clock((plls), (state)->regs[reg], \
+ reg ## _ ## enable_field ## _SHIFT)
+
+/**
+ * Compute and set the ouputs clocks periods.
+ * But do not propagate them further. Connected clocks
+ * will not receive any updates (See zynq_slcr_compute_clocks())
+ */
+static void zynq_slcr_compute_clocks(ZynqSLCRState *s)
+{
+ uint64_t ps_clk = clock_get(s->ps_clk);
+
+ /* consider outputs clocks are disabled while in reset */
+ if (device_is_in_reset(DEVICE(s))) {
+ ps_clk = 0;
+ }
+
+ uint64_t io_pll = zynq_slcr_compute_pll(ps_clk, s->regs[R_IO_PLL_CTRL]);
+ uint64_t arm_pll = zynq_slcr_compute_pll(ps_clk, s->regs[R_ARM_PLL_CTRL]);
+ uint64_t ddr_pll = zynq_slcr_compute_pll(ps_clk, s->regs[R_DDR_PLL_CTRL]);
+
+ uint64_t uart_mux[4] = {io_pll, io_pll, arm_pll, ddr_pll};
+
+ /* compute uartX reference clocks */
+ clock_set(s->uart0_ref_clk,
+ ZYNQ_COMPUTE_CLK(s, uart_mux, R_UART_CLK_CTRL, CLKACT0));
+ clock_set(s->uart1_ref_clk,
+ ZYNQ_COMPUTE_CLK(s, uart_mux, R_UART_CLK_CTRL, CLKACT1));
+}
+
+/**
+ * Propagate the outputs clocks.
+ * zynq_slcr_compute_clocks() should have been called before
+ * to configure them.
+ */
+static void zynq_slcr_propagate_clocks(ZynqSLCRState *s)
+{
+ clock_propagate(s->uart0_ref_clk);
+ clock_propagate(s->uart1_ref_clk);
+}
+
+static void zynq_slcr_ps_clk_callback(void *opaque)
+{
+ ZynqSLCRState *s = (ZynqSLCRState *) opaque;
+ zynq_slcr_compute_clocks(s);
+ zynq_slcr_propagate_clocks(s);
+}
+
+static void zynq_slcr_reset_init(Object *obj, ResetType type)
+{
+ ZynqSLCRState *s = ZYNQ_SLCR(obj);
int i;
DB_PRINT("RESET\n");
@@ -277,6 +404,23 @@ static void zynq_slcr_reset(DeviceState *d)
s->regs[R_DDRIOB + 12] = 0x00000021;
}
+static void zynq_slcr_reset_hold(Object *obj)
+{
+ ZynqSLCRState *s = ZYNQ_SLCR(obj);
+
+ /* will disable all output clocks */
+ zynq_slcr_compute_clocks(s);
+ zynq_slcr_propagate_clocks(s);
+}
+
+static void zynq_slcr_reset_exit(Object *obj)
+{
+ ZynqSLCRState *s = ZYNQ_SLCR(obj);
+
+ /* will compute output clocks according to ps_clk and registers */
+ zynq_slcr_compute_clocks(s);
+ zynq_slcr_propagate_clocks(s);
+}
static bool zynq_slcr_check_offset(hwaddr offset, bool rnw)
{
@@ -409,6 +553,13 @@ static void zynq_slcr_write(void *opaque, hwaddr offset,
qemu_system_reset_request(SHUTDOWN_CAUSE_GUEST_RESET);
}
break;
+ case R_IO_PLL_CTRL:
+ case R_ARM_PLL_CTRL:
+ case R_DDR_PLL_CTRL:
+ case R_UART_CLK_CTRL:
+ zynq_slcr_compute_clocks(s);
+ zynq_slcr_propagate_clocks(s);
+ break;
}
}
@@ -418,6 +569,13 @@ static const MemoryRegionOps slcr_ops = {
.endianness = DEVICE_NATIVE_ENDIAN,
};
+static const ClockPortInitArray zynq_slcr_clocks = {
+ QDEV_CLOCK_IN(ZynqSLCRState, ps_clk, zynq_slcr_ps_clk_callback),
+ QDEV_CLOCK_OUT(ZynqSLCRState, uart0_ref_clk),
+ QDEV_CLOCK_OUT(ZynqSLCRState, uart1_ref_clk),
+ QDEV_CLOCK_END
+};
+
static void zynq_slcr_init(Object *obj)
{
ZynqSLCRState *s = ZYNQ_SLCR(obj);
@@ -425,14 +583,17 @@ static void zynq_slcr_init(Object *obj)
memory_region_init_io(&s->iomem, obj, &slcr_ops, s, "slcr",
ZYNQ_SLCR_MMIO_SIZE);
sysbus_init_mmio(SYS_BUS_DEVICE(obj), &s->iomem);
+
+ qdev_init_clocks(DEVICE(obj), zynq_slcr_clocks);
}
static const VMStateDescription vmstate_zynq_slcr = {
.name = "zynq_slcr",
- .version_id = 2,
+ .version_id = 3,
.minimum_version_id = 2,
.fields = (VMStateField[]) {
VMSTATE_UINT32_ARRAY(regs, ZynqSLCRState, ZYNQ_SLCR_NUM_REGS),
+ VMSTATE_CLOCK_V(ps_clk, ZynqSLCRState, 3),
VMSTATE_END_OF_LIST()
}
};
@@ -440,9 +601,12 @@ static const VMStateDescription vmstate_zynq_slcr = {
static void zynq_slcr_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
+ ResettableClass *rc = RESETTABLE_CLASS(klass);
dc->vmsd = &vmstate_zynq_slcr;
- dc->reset = zynq_slcr_reset;
+ rc->phases.enter = zynq_slcr_reset_init;
+ rc->phases.hold = zynq_slcr_reset_hold;
+ rc->phases.exit = zynq_slcr_reset_exit;
}
static const TypeInfo zynq_slcr_info = {
--
2.20.1
^ permalink raw reply related [flat|nested] 40+ messages in thread* [PULL 15/31] hw/char/cadence_uart: add clock support
2020-04-30 11:51 [PULL 00/31] target-arm queue Peter Maydell
` (13 preceding siblings ...)
2020-04-30 11:51 ` [PULL 14/31] hw/misc/zynq_slcr: add clock generation for uarts Peter Maydell
@ 2020-04-30 11:51 ` Peter Maydell
2020-04-30 11:51 ` [PULL 16/31] hw/arm/xilinx_zynq: connect uart clocks to slcr Peter Maydell
` (16 subsequent siblings)
31 siblings, 0 replies; 40+ messages in thread
From: Peter Maydell @ 2020-04-30 11:51 UTC (permalink / raw)
To: qemu-devel
From: Damien Hedde <damien.hedde@greensocs.com>
Switch the cadence uart to multi-phase reset and add the
reference clock input.
The input clock frequency is added to the migration structure.
The reference clock controls the baudrate generation. If it disabled,
any input characters and events are ignored.
If this clock remains unconnected, the uart behaves as before
(it default to a 50MHz ref clock).
Signed-off-by: Damien Hedde <damien.hedde@greensocs.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20200406135251.157596-8-damien.hedde@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
include/hw/char/cadence_uart.h | 1 +
hw/char/cadence_uart.c | 73 +++++++++++++++++++++++++++++-----
hw/char/trace-events | 3 ++
3 files changed, 67 insertions(+), 10 deletions(-)
diff --git a/include/hw/char/cadence_uart.h b/include/hw/char/cadence_uart.h
index 47cec956c4b..2a179a572fc 100644
--- a/include/hw/char/cadence_uart.h
+++ b/include/hw/char/cadence_uart.h
@@ -49,6 +49,7 @@ typedef struct {
CharBackend chr;
qemu_irq irq;
QEMUTimer *fifo_trigger_handle;
+ Clock *refclk;
} CadenceUARTState;
static inline DeviceState *cadence_uart_create(hwaddr addr,
diff --git a/hw/char/cadence_uart.c b/hw/char/cadence_uart.c
index 22e47972f15..e196906c923 100644
--- a/hw/char/cadence_uart.c
+++ b/hw/char/cadence_uart.c
@@ -31,6 +31,8 @@
#include "qemu/module.h"
#include "hw/char/cadence_uart.h"
#include "hw/irq.h"
+#include "hw/qdev-clock.h"
+#include "trace.h"
#ifdef CADENCE_UART_ERR_DEBUG
#define DB_PRINT(...) do { \
@@ -97,7 +99,7 @@
#define LOCAL_LOOPBACK (0x2 << UART_MR_CHMODE_SH)
#define REMOTE_LOOPBACK (0x3 << UART_MR_CHMODE_SH)
-#define UART_INPUT_CLK 50000000
+#define UART_DEFAULT_REF_CLK (50 * 1000 * 1000)
#define R_CR (0x00/4)
#define R_MR (0x04/4)
@@ -171,12 +173,15 @@ static void uart_send_breaks(CadenceUARTState *s)
static void uart_parameters_setup(CadenceUARTState *s)
{
QEMUSerialSetParams ssp;
- unsigned int baud_rate, packet_size;
+ unsigned int baud_rate, packet_size, input_clk;
+ input_clk = clock_get_hz(s->refclk);
- baud_rate = (s->r[R_MR] & UART_MR_CLKS) ?
- UART_INPUT_CLK / 8 : UART_INPUT_CLK;
+ baud_rate = (s->r[R_MR] & UART_MR_CLKS) ? input_clk / 8 : input_clk;
+ baud_rate /= (s->r[R_BRGR] * (s->r[R_BDIV] + 1));
+ trace_cadence_uart_baudrate(baud_rate);
+
+ ssp.speed = baud_rate;
- ssp.speed = baud_rate / (s->r[R_BRGR] * (s->r[R_BDIV] + 1));
packet_size = 1;
switch (s->r[R_MR] & UART_MR_PAR) {
@@ -215,6 +220,13 @@ static void uart_parameters_setup(CadenceUARTState *s)
}
packet_size += ssp.data_bits + ssp.stop_bits;
+ if (ssp.speed == 0) {
+ /*
+ * Avoid division-by-zero below.
+ * TODO: find something better
+ */
+ ssp.speed = 1;
+ }
s->char_tx_time = (NANOSECONDS_PER_SECOND / ssp.speed) * packet_size;
qemu_chr_fe_ioctl(&s->chr, CHR_IOCTL_SERIAL_SET_PARAMS, &ssp);
}
@@ -340,6 +352,11 @@ static void uart_receive(void *opaque, const uint8_t *buf, int size)
CadenceUARTState *s = opaque;
uint32_t ch_mode = s->r[R_MR] & UART_MR_CHMODE;
+ /* ignore characters when unclocked or in reset */
+ if (!clock_is_enabled(s->refclk) || device_is_in_reset(DEVICE(s))) {
+ return;
+ }
+
if (ch_mode == NORMAL_MODE || ch_mode == ECHO_MODE) {
uart_write_rx_fifo(opaque, buf, size);
}
@@ -353,6 +370,11 @@ static void uart_event(void *opaque, QEMUChrEvent event)
CadenceUARTState *s = opaque;
uint8_t buf = '\0';
+ /* ignore characters when unclocked or in reset */
+ if (!clock_is_enabled(s->refclk) || device_is_in_reset(DEVICE(s))) {
+ return;
+ }
+
if (event == CHR_EVENT_BREAK) {
uart_write_rx_fifo(opaque, &buf, 1);
}
@@ -462,9 +484,9 @@ static const MemoryRegionOps uart_ops = {
.endianness = DEVICE_NATIVE_ENDIAN,
};
-static void cadence_uart_reset(DeviceState *dev)
+static void cadence_uart_reset_init(Object *obj, ResetType type)
{
- CadenceUARTState *s = CADENCE_UART(dev);
+ CadenceUARTState *s = CADENCE_UART(obj);
s->r[R_CR] = 0x00000128;
s->r[R_IMR] = 0;
@@ -473,6 +495,11 @@ static void cadence_uart_reset(DeviceState *dev)
s->r[R_BRGR] = 0x0000028B;
s->r[R_BDIV] = 0x0000000F;
s->r[R_TTRIG] = 0x00000020;
+}
+
+static void cadence_uart_reset_hold(Object *obj)
+{
+ CadenceUARTState *s = CADENCE_UART(obj);
uart_rx_reset(s);
uart_tx_reset(s);
@@ -491,6 +518,14 @@ static void cadence_uart_realize(DeviceState *dev, Error **errp)
uart_event, NULL, s, NULL, true);
}
+static void cadence_uart_refclk_update(void *opaque)
+{
+ CadenceUARTState *s = opaque;
+
+ /* recompute uart's speed on clock change */
+ uart_parameters_setup(s);
+}
+
static void cadence_uart_init(Object *obj)
{
SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
@@ -500,9 +535,23 @@ static void cadence_uart_init(Object *obj)
sysbus_init_mmio(sbd, &s->iomem);
sysbus_init_irq(sbd, &s->irq);
+ s->refclk = qdev_init_clock_in(DEVICE(obj), "refclk",
+ cadence_uart_refclk_update, s);
+ /* initialize the frequency in case the clock remains unconnected */
+ clock_set_hz(s->refclk, UART_DEFAULT_REF_CLK);
+
s->char_tx_time = (NANOSECONDS_PER_SECOND / 9600) * 10;
}
+static int cadence_uart_pre_load(void *opaque)
+{
+ CadenceUARTState *s = opaque;
+
+ /* the frequency will be overriden if the refclk field is present */
+ clock_set_hz(s->refclk, UART_DEFAULT_REF_CLK);
+ return 0;
+}
+
static int cadence_uart_post_load(void *opaque, int version_id)
{
CadenceUARTState *s = opaque;
@@ -521,8 +570,9 @@ static int cadence_uart_post_load(void *opaque, int version_id)
static const VMStateDescription vmstate_cadence_uart = {
.name = "cadence_uart",
- .version_id = 2,
+ .version_id = 3,
.minimum_version_id = 2,
+ .pre_load = cadence_uart_pre_load,
.post_load = cadence_uart_post_load,
.fields = (VMStateField[]) {
VMSTATE_UINT32_ARRAY(r, CadenceUARTState, CADENCE_UART_R_MAX),
@@ -534,8 +584,9 @@ static const VMStateDescription vmstate_cadence_uart = {
VMSTATE_UINT32(tx_count, CadenceUARTState),
VMSTATE_UINT32(rx_wpos, CadenceUARTState),
VMSTATE_TIMER_PTR(fifo_trigger_handle, CadenceUARTState),
+ VMSTATE_CLOCK_V(refclk, CadenceUARTState, 3),
VMSTATE_END_OF_LIST()
- }
+ },
};
static Property cadence_uart_properties[] = {
@@ -546,10 +597,12 @@ static Property cadence_uart_properties[] = {
static void cadence_uart_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
+ ResettableClass *rc = RESETTABLE_CLASS(klass);
dc->realize = cadence_uart_realize;
dc->vmsd = &vmstate_cadence_uart;
- dc->reset = cadence_uart_reset;
+ rc->phases.enter = cadence_uart_reset_init;
+ rc->phases.hold = cadence_uart_reset_hold;
device_class_set_props(dc, cadence_uart_properties);
}
diff --git a/hw/char/trace-events b/hw/char/trace-events
index 6f938301d98..d20eafd56f8 100644
--- a/hw/char/trace-events
+++ b/hw/char/trace-events
@@ -97,3 +97,6 @@ exynos_uart_wo_read(uint32_t channel, const char *name, uint32_t reg) "UART%d: T
exynos_uart_rxsize(uint32_t channel, uint32_t size) "UART%d: Rx FIFO size: %d"
exynos_uart_channel_error(uint32_t channel) "Wrong UART channel number: %d"
exynos_uart_rx_timeout(uint32_t channel, uint32_t stat, uint32_t intsp) "UART%d: Rx timeout stat=0x%x intsp=0x%x"
+
+# hw/char/cadence_uart.c
+cadence_uart_baudrate(unsigned baudrate) "baudrate %u"
--
2.20.1
^ permalink raw reply related [flat|nested] 40+ messages in thread* [PULL 16/31] hw/arm/xilinx_zynq: connect uart clocks to slcr
2020-04-30 11:51 [PULL 00/31] target-arm queue Peter Maydell
` (14 preceding siblings ...)
2020-04-30 11:51 ` [PULL 15/31] hw/char/cadence_uart: add clock support Peter Maydell
@ 2020-04-30 11:51 ` Peter Maydell
2020-04-30 11:51 ` [PULL 17/31] qdev-monitor: print the device's clock with info qtree Peter Maydell
` (15 subsequent siblings)
31 siblings, 0 replies; 40+ messages in thread
From: Peter Maydell @ 2020-04-30 11:51 UTC (permalink / raw)
To: qemu-devel
From: Damien Hedde <damien.hedde@greensocs.com>
Add the connection between the slcr's output clocks and the uarts inputs.
Also add the main board clock 'ps_clk', which is hard-coded to 33.33MHz
(the default frequency). This clock is used to feed the slcr's input
clock.
Signed-off-by: Damien Hedde <damien.hedde@greensocs.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20200406135251.157596-9-damien.hedde@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
hw/arm/xilinx_zynq.c | 57 +++++++++++++++++++++++++++++++++++++-------
1 file changed, 49 insertions(+), 8 deletions(-)
diff --git a/hw/arm/xilinx_zynq.c b/hw/arm/xilinx_zynq.c
index 571cdcd599e..91b498dd5d3 100644
--- a/hw/arm/xilinx_zynq.c
+++ b/hw/arm/xilinx_zynq.c
@@ -35,6 +35,15 @@
#include "hw/char/cadence_uart.h"
#include "hw/net/cadence_gem.h"
#include "hw/cpu/a9mpcore.h"
+#include "hw/qdev-clock.h"
+#include "sysemu/reset.h"
+
+#define TYPE_ZYNQ_MACHINE MACHINE_TYPE_NAME("xilinx-zynq-a9")
+#define ZYNQ_MACHINE(obj) \
+ OBJECT_CHECK(ZynqMachineState, (obj), TYPE_ZYNQ_MACHINE)
+
+/* board base frequency: 33.333333 MHz */
+#define PS_CLK_FREQUENCY (100 * 1000 * 1000 / 3)
#define NUM_SPI_FLASHES 4
#define NUM_QSPI_FLASHES 2
@@ -75,6 +84,11 @@ static const int dma_irqs[8] = {
0xe3401000 + ARMV7_IMM16(extract32((val), 16, 16)), /* movt r1 ... */ \
0xe5801000 + (addr)
+typedef struct ZynqMachineState {
+ MachineState parent;
+ Clock *ps_clk;
+} ZynqMachineState;
+
static void zynq_write_board_setup(ARMCPU *cpu,
const struct arm_boot_info *info)
{
@@ -159,10 +173,11 @@ static inline void zynq_init_spi_flashes(uint32_t base_addr, qemu_irq irq,
static void zynq_init(MachineState *machine)
{
+ ZynqMachineState *zynq_machine = ZYNQ_MACHINE(machine);
ARMCPU *cpu;
MemoryRegion *address_space_mem = get_system_memory();
MemoryRegion *ocm_ram = g_new(MemoryRegion, 1);
- DeviceState *dev;
+ DeviceState *dev, *slcr;
SysBusDevice *busdev;
qemu_irq pic[64];
int n;
@@ -206,9 +221,18 @@ static void zynq_init(MachineState *machine)
1, 0x0066, 0x0022, 0x0000, 0x0000, 0x0555, 0x2aa,
0);
- dev = qdev_create(NULL, "xilinx,zynq_slcr");
- qdev_init_nofail(dev);
- sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, 0xF8000000);
+ /* Create slcr, keep a pointer to connect clocks */
+ slcr = qdev_create(NULL, "xilinx,zynq_slcr");
+ qdev_init_nofail(slcr);
+ sysbus_mmio_map(SYS_BUS_DEVICE(slcr), 0, 0xF8000000);
+
+ /* Create the main clock source, and feed slcr with it */
+ zynq_machine->ps_clk = CLOCK(object_new(TYPE_CLOCK));
+ object_property_add_child(OBJECT(zynq_machine), "ps_clk",
+ OBJECT(zynq_machine->ps_clk), &error_abort);
+ object_unref(OBJECT(zynq_machine->ps_clk));
+ clock_set_hz(zynq_machine->ps_clk, PS_CLK_FREQUENCY);
+ qdev_connect_clock_in(slcr, "ps_clk", zynq_machine->ps_clk);
dev = qdev_create(NULL, TYPE_A9MPCORE_PRIV);
qdev_prop_set_uint32(dev, "num-cpu", 1);
@@ -229,8 +253,12 @@ static void zynq_init(MachineState *machine)
sysbus_create_simple(TYPE_CHIPIDEA, 0xE0002000, pic[53 - IRQ_OFFSET]);
sysbus_create_simple(TYPE_CHIPIDEA, 0xE0003000, pic[76 - IRQ_OFFSET]);
- cadence_uart_create(0xE0000000, pic[59 - IRQ_OFFSET], serial_hd(0));
- cadence_uart_create(0xE0001000, pic[82 - IRQ_OFFSET], serial_hd(1));
+ dev = cadence_uart_create(0xE0000000, pic[59 - IRQ_OFFSET], serial_hd(0));
+ qdev_connect_clock_in(dev, "refclk",
+ qdev_get_clock_out(slcr, "uart0_ref_clk"));
+ dev = cadence_uart_create(0xE0001000, pic[82 - IRQ_OFFSET], serial_hd(1));
+ qdev_connect_clock_in(dev, "refclk",
+ qdev_get_clock_out(slcr, "uart1_ref_clk"));
sysbus_create_varargs("cadence_ttc", 0xF8001000,
pic[42-IRQ_OFFSET], pic[43-IRQ_OFFSET], pic[44-IRQ_OFFSET], NULL);
@@ -308,8 +336,9 @@ static void zynq_init(MachineState *machine)
arm_load_kernel(ARM_CPU(first_cpu), machine, &zynq_binfo);
}
-static void zynq_machine_init(MachineClass *mc)
+static void zynq_machine_class_init(ObjectClass *oc, void *data)
{
+ MachineClass *mc = MACHINE_CLASS(oc);
mc->desc = "Xilinx Zynq Platform Baseboard for Cortex-A9";
mc->init = zynq_init;
mc->max_cpus = 1;
@@ -319,4 +348,16 @@ static void zynq_machine_init(MachineClass *mc)
mc->default_ram_id = "zynq.ext_ram";
}
-DEFINE_MACHINE("xilinx-zynq-a9", zynq_machine_init)
+static const TypeInfo zynq_machine_type = {
+ .name = TYPE_ZYNQ_MACHINE,
+ .parent = TYPE_MACHINE,
+ .class_init = zynq_machine_class_init,
+ .instance_size = sizeof(ZynqMachineState),
+};
+
+static void zynq_machine_register_types(void)
+{
+ type_register_static(&zynq_machine_type);
+}
+
+type_init(zynq_machine_register_types)
--
2.20.1
^ permalink raw reply related [flat|nested] 40+ messages in thread* [PULL 17/31] qdev-monitor: print the device's clock with info qtree
2020-04-30 11:51 [PULL 00/31] target-arm queue Peter Maydell
` (15 preceding siblings ...)
2020-04-30 11:51 ` [PULL 16/31] hw/arm/xilinx_zynq: connect uart clocks to slcr Peter Maydell
@ 2020-04-30 11:51 ` Peter Maydell
2020-04-30 11:51 ` [PULL 18/31] hw/arm: versal: Setup the ADMA with 128bit bus-width Peter Maydell
` (14 subsequent siblings)
31 siblings, 0 replies; 40+ messages in thread
From: Peter Maydell @ 2020-04-30 11:51 UTC (permalink / raw)
To: qemu-devel
From: Damien Hedde <damien.hedde@greensocs.com>
This prints the clocks attached to a DeviceState when using
"info qtree" monitor command. For every clock, it displays the
direction, the name and if the clock is forwarded. For input clock,
it displays also the frequency.
This is based on the original work of Frederic Konrad.
Here follows a sample of `info qtree` output on xilinx_zynq machine
after linux boot with only one uart clocked:
> bus: main-system-bus
> type System
> [...]
> dev: cadence_uart, id ""
> gpio-out "sysbus-irq" 1
> clock-in "refclk" freq_hz=0.000000e+00
> chardev = ""
> mmio 00000000e0001000/0000000000001000
> dev: cadence_uart, id ""
> gpio-out "sysbus-irq" 1
> clock-in "refclk" freq_hz=1.375661e+07
> chardev = "serial0"
> mmio 00000000e0000000/0000000000001000
> [...]
> dev: xilinx,zynq_slcr, id ""
> clock-out "uart1_ref_clk" freq_hz=0.000000e+00
> clock-out "uart0_ref_clk" freq_hz=1.375661e+07
> clock-in "ps_clk" freq_hz=3.333333e+07
> mmio 00000000f8000000/0000000000001000
Signed-off-by: Damien Hedde <damien.hedde@greensocs.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20200406135251.157596-10-damien.hedde@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
qdev-monitor.c | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/qdev-monitor.c b/qdev-monitor.c
index 9833b335496..56cee1483fa 100644
--- a/qdev-monitor.c
+++ b/qdev-monitor.c
@@ -38,6 +38,7 @@
#include "migration/misc.h"
#include "migration/migration.h"
#include "qemu/cutils.h"
+#include "hw/clock.h"
/*
* Aliases were a bad idea from the start. Let's keep them
@@ -737,6 +738,7 @@ static void qdev_print(Monitor *mon, DeviceState *dev, int indent)
ObjectClass *class;
BusState *child;
NamedGPIOList *ngl;
+ NamedClockList *ncl;
qdev_printf("dev: %s, id \"%s\"\n", object_get_typename(OBJECT(dev)),
dev->id ? dev->id : "");
@@ -751,6 +753,13 @@ static void qdev_print(Monitor *mon, DeviceState *dev, int indent)
ngl->num_out);
}
}
+ QLIST_FOREACH(ncl, &dev->clocks, node) {
+ qdev_printf("clock-%s%s \"%s\" freq_hz=%e\n",
+ ncl->output ? "out" : "in",
+ ncl->alias ? " (alias)" : "",
+ ncl->name,
+ CLOCK_PERIOD_TO_HZ(1.0 * clock_get(ncl->clock)));
+ }
class = object_get_class(OBJECT(dev));
do {
qdev_print_props(mon, dev, DEVICE_CLASS(class)->props_, indent);
--
2.20.1
^ permalink raw reply related [flat|nested] 40+ messages in thread* [PULL 18/31] hw/arm: versal: Setup the ADMA with 128bit bus-width
2020-04-30 11:51 [PULL 00/31] target-arm queue Peter Maydell
` (16 preceding siblings ...)
2020-04-30 11:51 ` [PULL 17/31] qdev-monitor: print the device's clock with info qtree Peter Maydell
@ 2020-04-30 11:51 ` Peter Maydell
2020-04-30 11:51 ` [PULL 19/31] Cadence: gem: fix wraparound in 64bit descriptors Peter Maydell
` (13 subsequent siblings)
31 siblings, 0 replies; 40+ messages in thread
From: Peter Maydell @ 2020-04-30 11:51 UTC (permalink / raw)
To: qemu-devel
From: "Edgar E. Iglesias" <edgar.iglesias@xilinx.com>
Setup the ADMA with 128bit bus-width. This matters when
FIXED BURST mode is used.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Message-id: 20200417153800.27399-2-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
hw/arm/xlnx-versal.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/hw/arm/xlnx-versal.c b/hw/arm/xlnx-versal.c
index cb0122a3a68..94460f2343b 100644
--- a/hw/arm/xlnx-versal.c
+++ b/hw/arm/xlnx-versal.c
@@ -205,6 +205,8 @@ static void versal_create_admas(Versal *s, qemu_irq *pic)
dev = qdev_create(NULL, "xlnx.zdma");
s->lpd.iou.adma[i] = SYS_BUS_DEVICE(dev);
+ object_property_set_int(OBJECT(s->lpd.iou.adma[i]), 128, "bus-width",
+ &error_abort);
object_property_add_child(OBJECT(s), name, OBJECT(dev), &error_fatal);
qdev_init_nofail(dev);
--
2.20.1
^ permalink raw reply related [flat|nested] 40+ messages in thread* [PULL 19/31] Cadence: gem: fix wraparound in 64bit descriptors
2020-04-30 11:51 [PULL 00/31] target-arm queue Peter Maydell
` (17 preceding siblings ...)
2020-04-30 11:51 ` [PULL 18/31] hw/arm: versal: Setup the ADMA with 128bit bus-width Peter Maydell
@ 2020-04-30 11:51 ` Peter Maydell
2020-04-30 11:51 ` [PULL 20/31] net: cadence_gem: clear RX control descriptor Peter Maydell
` (12 subsequent siblings)
31 siblings, 0 replies; 40+ messages in thread
From: Peter Maydell @ 2020-04-30 11:51 UTC (permalink / raw)
To: qemu-devel
From: Ramon Fried <rfried.dev@gmail.com>
Wraparound of TX descriptor cyclic buffer only updated
the low 32 bits of the descriptor.
Fix that by checking if we're working with 64bit descriptors.
Signed-off-by: Ramon Fried <rfried.dev@gmail.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20200417171736.441607-1-rfried.dev@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
hw/net/cadence_gem.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/hw/net/cadence_gem.c b/hw/net/cadence_gem.c
index 51ec5a072d0..b7b7985bf26 100644
--- a/hw/net/cadence_gem.c
+++ b/hw/net/cadence_gem.c
@@ -1238,7 +1238,14 @@ static void gem_transmit(CadenceGEMState *s)
/* read next descriptor */
if (tx_desc_get_wrap(desc)) {
tx_desc_set_last(desc);
- packet_desc_addr = s->regs[GEM_TXQBASE];
+
+ if (s->regs[GEM_DMACFG] & GEM_DMACFG_ADDR_64B) {
+ packet_desc_addr = s->regs[GEM_TBQPH];
+ packet_desc_addr <<= 32;
+ } else {
+ packet_desc_addr = 0;
+ }
+ packet_desc_addr |= s->regs[GEM_TXQBASE];
} else {
packet_desc_addr += 4 * gem_get_desc_len(s, false);
}
--
2.20.1
^ permalink raw reply related [flat|nested] 40+ messages in thread* [PULL 20/31] net: cadence_gem: clear RX control descriptor
2020-04-30 11:51 [PULL 00/31] target-arm queue Peter Maydell
` (18 preceding siblings ...)
2020-04-30 11:51 ` [PULL 19/31] Cadence: gem: fix wraparound in 64bit descriptors Peter Maydell
@ 2020-04-30 11:51 ` Peter Maydell
2020-04-30 11:51 ` [PULL 21/31] target/arm: Vectorize integer comparison vs zero Peter Maydell
` (11 subsequent siblings)
31 siblings, 0 replies; 40+ messages in thread
From: Peter Maydell @ 2020-04-30 11:51 UTC (permalink / raw)
To: qemu-devel
From: Ramon Fried <rfried.dev@gmail.com>
The RX ring descriptors control field is used for setting
SOF and EOF (start of frame and end of frame).
The SOF and EOF weren't cleared from the previous descriptors,
causing inconsistencies in ring buffer.
Fix that by clearing the control field of every descriptors we're
processing.
Signed-off-by: Ramon Fried <rfried.dev@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20200418085145.489726-1-rfried.dev@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
hw/net/cadence_gem.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/hw/net/cadence_gem.c b/hw/net/cadence_gem.c
index b7b7985bf26..22a0b1b1f9a 100644
--- a/hw/net/cadence_gem.c
+++ b/hw/net/cadence_gem.c
@@ -411,6 +411,11 @@ static inline void rx_desc_set_sof(uint32_t *desc)
desc[1] |= DESC_1_RX_SOF;
}
+static inline void rx_desc_clear_control(uint32_t *desc)
+{
+ desc[1] = 0;
+}
+
static inline void rx_desc_set_eof(uint32_t *desc)
{
desc[1] |= DESC_1_RX_EOF;
@@ -999,6 +1004,8 @@ static ssize_t gem_receive(NetClientState *nc, const uint8_t *buf, size_t size)
rxbuf_ptr += MIN(bytes_to_copy, rxbufsize);
bytes_to_copy -= MIN(bytes_to_copy, rxbufsize);
+ rx_desc_clear_control(s->rx_desc[q]);
+
/* Update the descriptor. */
if (first_desc) {
rx_desc_set_sof(s->rx_desc[q]);
--
2.20.1
^ permalink raw reply related [flat|nested] 40+ messages in thread* [PULL 21/31] target/arm: Vectorize integer comparison vs zero
2020-04-30 11:51 [PULL 00/31] target-arm queue Peter Maydell
` (19 preceding siblings ...)
2020-04-30 11:51 ` [PULL 20/31] net: cadence_gem: clear RX control descriptor Peter Maydell
@ 2020-04-30 11:51 ` Peter Maydell
2020-04-30 11:51 ` [PULL 22/31] hw/arm/virt: dt: move creation of /secure-chosen to create_fdt() Peter Maydell
` (10 subsequent siblings)
31 siblings, 0 replies; 40+ messages in thread
From: Peter Maydell @ 2020-04-30 11:51 UTC (permalink / raw)
To: qemu-devel
From: Richard Henderson <richard.henderson@linaro.org>
These instructions are often used in glibc's string routines.
They were the final uses of the 32-bit at a time neon helpers.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200418162808.4680-1-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
target/arm/helper.h | 27 ++--
target/arm/translate.h | 5 +
target/arm/neon_helper.c | 24 ----
target/arm/translate-a64.c | 64 +++-------
target/arm/translate.c | 256 +++++++++++++++++++++++++++++++------
target/arm/vec_helper.c | 25 ++++
6 files changed, 278 insertions(+), 123 deletions(-)
diff --git a/target/arm/helper.h b/target/arm/helper.h
index f37b8670a55..5817626b20b 100644
--- a/target/arm/helper.h
+++ b/target/arm/helper.h
@@ -275,19 +275,6 @@ DEF_HELPER_2(neon_hsub_u16, i32, i32, i32)
DEF_HELPER_2(neon_hsub_s32, s32, s32, s32)
DEF_HELPER_2(neon_hsub_u32, i32, i32, i32)
-DEF_HELPER_2(neon_cgt_u8, i32, i32, i32)
-DEF_HELPER_2(neon_cgt_s8, i32, i32, i32)
-DEF_HELPER_2(neon_cgt_u16, i32, i32, i32)
-DEF_HELPER_2(neon_cgt_s16, i32, i32, i32)
-DEF_HELPER_2(neon_cgt_u32, i32, i32, i32)
-DEF_HELPER_2(neon_cgt_s32, i32, i32, i32)
-DEF_HELPER_2(neon_cge_u8, i32, i32, i32)
-DEF_HELPER_2(neon_cge_s8, i32, i32, i32)
-DEF_HELPER_2(neon_cge_u16, i32, i32, i32)
-DEF_HELPER_2(neon_cge_s16, i32, i32, i32)
-DEF_HELPER_2(neon_cge_u32, i32, i32, i32)
-DEF_HELPER_2(neon_cge_s32, i32, i32, i32)
-
DEF_HELPER_2(neon_pmin_u8, i32, i32, i32)
DEF_HELPER_2(neon_pmin_s8, i32, i32, i32)
DEF_HELPER_2(neon_pmin_u16, i32, i32, i32)
@@ -347,9 +334,6 @@ DEF_HELPER_2(neon_mul_u16, i32, i32, i32)
DEF_HELPER_2(neon_tst_u8, i32, i32, i32)
DEF_HELPER_2(neon_tst_u16, i32, i32, i32)
DEF_HELPER_2(neon_tst_u32, i32, i32, i32)
-DEF_HELPER_2(neon_ceq_u8, i32, i32, i32)
-DEF_HELPER_2(neon_ceq_u16, i32, i32, i32)
-DEF_HELPER_2(neon_ceq_u32, i32, i32, i32)
DEF_HELPER_1(neon_clz_u8, i32, i32)
DEF_HELPER_1(neon_clz_u16, i32, i32)
@@ -686,6 +670,17 @@ DEF_HELPER_FLAGS_2(frint64_s, TCG_CALL_NO_RWG, f32, f32, ptr)
DEF_HELPER_FLAGS_2(frint32_d, TCG_CALL_NO_RWG, f64, f64, ptr)
DEF_HELPER_FLAGS_2(frint64_d, TCG_CALL_NO_RWG, f64, f64, ptr)
+DEF_HELPER_FLAGS_3(gvec_ceq0_b, TCG_CALL_NO_RWG, void, ptr, ptr, i32)
+DEF_HELPER_FLAGS_3(gvec_ceq0_h, TCG_CALL_NO_RWG, void, ptr, ptr, i32)
+DEF_HELPER_FLAGS_3(gvec_clt0_b, TCG_CALL_NO_RWG, void, ptr, ptr, i32)
+DEF_HELPER_FLAGS_3(gvec_clt0_h, TCG_CALL_NO_RWG, void, ptr, ptr, i32)
+DEF_HELPER_FLAGS_3(gvec_cle0_b, TCG_CALL_NO_RWG, void, ptr, ptr, i32)
+DEF_HELPER_FLAGS_3(gvec_cle0_h, TCG_CALL_NO_RWG, void, ptr, ptr, i32)
+DEF_HELPER_FLAGS_3(gvec_cgt0_b, TCG_CALL_NO_RWG, void, ptr, ptr, i32)
+DEF_HELPER_FLAGS_3(gvec_cgt0_h, TCG_CALL_NO_RWG, void, ptr, ptr, i32)
+DEF_HELPER_FLAGS_3(gvec_cge0_b, TCG_CALL_NO_RWG, void, ptr, ptr, i32)
+DEF_HELPER_FLAGS_3(gvec_cge0_h, TCG_CALL_NO_RWG, void, ptr, ptr, i32)
+
DEF_HELPER_FLAGS_4(gvec_sshl_b, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_sshl_h, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_ushl_b, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
diff --git a/target/arm/translate.h b/target/arm/translate.h
index d9ea0c99cc8..98b319f3f69 100644
--- a/target/arm/translate.h
+++ b/target/arm/translate.h
@@ -275,6 +275,11 @@ static inline void gen_swstep_exception(DisasContext *s, int isv, int ex)
uint64_t vfp_expand_imm(int size, uint8_t imm8);
/* Vector operations shared between ARM and AArch64. */
+extern const GVecGen2 ceq0_op[4];
+extern const GVecGen2 clt0_op[4];
+extern const GVecGen2 cgt0_op[4];
+extern const GVecGen2 cle0_op[4];
+extern const GVecGen2 cge0_op[4];
extern const GVecGen3 mla_op[4];
extern const GVecGen3 mls_op[4];
extern const GVecGen3 cmtst_op[4];
diff --git a/target/arm/neon_helper.c b/target/arm/neon_helper.c
index c7a8438b42a..448be93fa12 100644
--- a/target/arm/neon_helper.c
+++ b/target/arm/neon_helper.c
@@ -562,24 +562,6 @@ uint32_t HELPER(neon_hsub_u32)(uint32_t src1, uint32_t src2)
return dest;
}
-#define NEON_FN(dest, src1, src2) dest = (src1 > src2) ? ~0 : 0
-NEON_VOP(cgt_s8, neon_s8, 4)
-NEON_VOP(cgt_u8, neon_u8, 4)
-NEON_VOP(cgt_s16, neon_s16, 2)
-NEON_VOP(cgt_u16, neon_u16, 2)
-NEON_VOP(cgt_s32, neon_s32, 1)
-NEON_VOP(cgt_u32, neon_u32, 1)
-#undef NEON_FN
-
-#define NEON_FN(dest, src1, src2) dest = (src1 >= src2) ? ~0 : 0
-NEON_VOP(cge_s8, neon_s8, 4)
-NEON_VOP(cge_u8, neon_u8, 4)
-NEON_VOP(cge_s16, neon_s16, 2)
-NEON_VOP(cge_u16, neon_u16, 2)
-NEON_VOP(cge_s32, neon_s32, 1)
-NEON_VOP(cge_u32, neon_u32, 1)
-#undef NEON_FN
-
#define NEON_FN(dest, src1, src2) dest = (src1 < src2) ? src1 : src2
NEON_POP(pmin_s8, neon_s8, 4)
NEON_POP(pmin_u8, neon_u8, 4)
@@ -1135,12 +1117,6 @@ NEON_VOP(tst_u16, neon_u16, 2)
NEON_VOP(tst_u32, neon_u32, 1)
#undef NEON_FN
-#define NEON_FN(dest, src1, src2) dest = (src1 == src2) ? -1 : 0
-NEON_VOP(ceq_u8, neon_u8, 4)
-NEON_VOP(ceq_u16, neon_u16, 2)
-NEON_VOP(ceq_u32, neon_u32, 1)
-#undef NEON_FN
-
/* Count Leading Sign/Zero Bits. */
static inline int do_clz8(uint8_t x)
{
diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c
index 7580e463674..efb1c4adc4e 100644
--- a/target/arm/translate-a64.c
+++ b/target/arm/translate-a64.c
@@ -594,6 +594,14 @@ static void gen_gvec_fn4(DisasContext *s, bool is_q, int rd, int rn, int rm,
is_q ? 16 : 8, vec_full_reg_size(s));
}
+/* Expand a 2-operand AdvSIMD vector operation using an op descriptor. */
+static void gen_gvec_op2(DisasContext *s, bool is_q, int rd,
+ int rn, const GVecGen2 *gvec_op)
+{
+ tcg_gen_gvec_2(vec_full_reg_offset(s, rd), vec_full_reg_offset(s, rn),
+ is_q ? 16 : 8, vec_full_reg_size(s), gvec_op);
+}
+
/* Expand a 2-operand + immediate AdvSIMD vector operation using
* an op descriptor.
*/
@@ -12366,6 +12374,15 @@ static void disas_simd_two_reg_misc(DisasContext *s, uint32_t insn)
return;
}
break;
+ case 0x8: /* CMGT, CMGE */
+ gen_gvec_op2(s, is_q, rd, rn, u ? &cge0_op[size] : &cgt0_op[size]);
+ return;
+ case 0x9: /* CMEQ, CMLE */
+ gen_gvec_op2(s, is_q, rd, rn, u ? &cle0_op[size] : &ceq0_op[size]);
+ return;
+ case 0xa: /* CMLT */
+ gen_gvec_op2(s, is_q, rd, rn, &clt0_op[size]);
+ return;
case 0xb:
if (u) { /* ABS, NEG */
gen_gvec_fn2(s, is_q, rd, rn, tcg_gen_gvec_neg, size);
@@ -12403,29 +12420,12 @@ static void disas_simd_two_reg_misc(DisasContext *s, uint32_t insn)
for (pass = 0; pass < (is_q ? 4 : 2); pass++) {
TCGv_i32 tcg_op = tcg_temp_new_i32();
TCGv_i32 tcg_res = tcg_temp_new_i32();
- TCGCond cond;
read_vec_element_i32(s, tcg_op, rn, pass, MO_32);
if (size == 2) {
/* Special cases for 32 bit elements */
switch (opcode) {
- case 0xa: /* CMLT */
- /* 32 bit integer comparison against zero, result is
- * test ? (2^32 - 1) : 0. We implement via setcond(test)
- * and inverting.
- */
- cond = TCG_COND_LT;
- do_cmop:
- tcg_gen_setcondi_i32(cond, tcg_res, tcg_op, 0);
- tcg_gen_neg_i32(tcg_res, tcg_res);
- break;
- case 0x8: /* CMGT, CMGE */
- cond = u ? TCG_COND_GE : TCG_COND_GT;
- goto do_cmop;
- case 0x9: /* CMEQ, CMLE */
- cond = u ? TCG_COND_LE : TCG_COND_EQ;
- goto do_cmop;
case 0x4: /* CLS */
if (u) {
tcg_gen_clzi_i32(tcg_res, tcg_op, 32);
@@ -12522,36 +12522,6 @@ static void disas_simd_two_reg_misc(DisasContext *s, uint32_t insn)
genfn(tcg_res, cpu_env, tcg_op);
break;
}
- case 0x8: /* CMGT, CMGE */
- case 0x9: /* CMEQ, CMLE */
- case 0xa: /* CMLT */
- {
- static NeonGenTwoOpFn * const fns[3][2] = {
- { gen_helper_neon_cgt_s8, gen_helper_neon_cgt_s16 },
- { gen_helper_neon_cge_s8, gen_helper_neon_cge_s16 },
- { gen_helper_neon_ceq_u8, gen_helper_neon_ceq_u16 },
- };
- NeonGenTwoOpFn *genfn;
- int comp;
- bool reverse;
- TCGv_i32 tcg_zero = tcg_const_i32(0);
-
- /* comp = index into [CMGT, CMGE, CMEQ, CMLE, CMLT] */
- comp = (opcode - 0x8) * 2 + u;
- /* ...but LE, LT are implemented as reverse GE, GT */
- reverse = (comp > 2);
- if (reverse) {
- comp = 4 - comp;
- }
- genfn = fns[comp][size];
- if (reverse) {
- genfn(tcg_res, tcg_zero, tcg_op);
- } else {
- genfn(tcg_res, tcg_op, tcg_zero);
- }
- tcg_temp_free_i32(tcg_zero);
- break;
- }
case 0x4: /* CLS, CLZ */
if (u) {
if (size == 0) {
diff --git a/target/arm/translate.c b/target/arm/translate.c
index 9f9f4e19e04..d4ad2028f12 100644
--- a/target/arm/translate.c
+++ b/target/arm/translate.c
@@ -3917,6 +3917,205 @@ static int do_v81_helper(DisasContext *s, gen_helper_gvec_3_ptr *fn,
return 1;
}
+static void gen_ceq0_i32(TCGv_i32 d, TCGv_i32 a)
+{
+ tcg_gen_setcondi_i32(TCG_COND_EQ, d, a, 0);
+ tcg_gen_neg_i32(d, d);
+}
+
+static void gen_ceq0_i64(TCGv_i64 d, TCGv_i64 a)
+{
+ tcg_gen_setcondi_i64(TCG_COND_EQ, d, a, 0);
+ tcg_gen_neg_i64(d, d);
+}
+
+static void gen_ceq0_vec(unsigned vece, TCGv_vec d, TCGv_vec a)
+{
+ TCGv_vec zero = tcg_const_zeros_vec_matching(d);
+ tcg_gen_cmp_vec(TCG_COND_EQ, vece, d, a, zero);
+ tcg_temp_free_vec(zero);
+}
+
+static const TCGOpcode vecop_list_cmp[] = {
+ INDEX_op_cmp_vec, 0
+};
+
+const GVecGen2 ceq0_op[4] = {
+ { .fno = gen_helper_gvec_ceq0_b,
+ .fniv = gen_ceq0_vec,
+ .opt_opc = vecop_list_cmp,
+ .vece = MO_8 },
+ { .fno = gen_helper_gvec_ceq0_h,
+ .fniv = gen_ceq0_vec,
+ .opt_opc = vecop_list_cmp,
+ .vece = MO_16 },
+ { .fni4 = gen_ceq0_i32,
+ .fniv = gen_ceq0_vec,
+ .opt_opc = vecop_list_cmp,
+ .vece = MO_32 },
+ { .fni8 = gen_ceq0_i64,
+ .fniv = gen_ceq0_vec,
+ .opt_opc = vecop_list_cmp,
+ .prefer_i64 = TCG_TARGET_REG_BITS == 64,
+ .vece = MO_64 },
+};
+
+static void gen_cle0_i32(TCGv_i32 d, TCGv_i32 a)
+{
+ tcg_gen_setcondi_i32(TCG_COND_LE, d, a, 0);
+ tcg_gen_neg_i32(d, d);
+}
+
+static void gen_cle0_i64(TCGv_i64 d, TCGv_i64 a)
+{
+ tcg_gen_setcondi_i64(TCG_COND_LE, d, a, 0);
+ tcg_gen_neg_i64(d, d);
+}
+
+static void gen_cle0_vec(unsigned vece, TCGv_vec d, TCGv_vec a)
+{
+ TCGv_vec zero = tcg_const_zeros_vec_matching(d);
+ tcg_gen_cmp_vec(TCG_COND_LE, vece, d, a, zero);
+ tcg_temp_free_vec(zero);
+}
+
+const GVecGen2 cle0_op[4] = {
+ { .fno = gen_helper_gvec_cle0_b,
+ .fniv = gen_cle0_vec,
+ .opt_opc = vecop_list_cmp,
+ .vece = MO_8 },
+ { .fno = gen_helper_gvec_cle0_h,
+ .fniv = gen_cle0_vec,
+ .opt_opc = vecop_list_cmp,
+ .vece = MO_16 },
+ { .fni4 = gen_cle0_i32,
+ .fniv = gen_cle0_vec,
+ .opt_opc = vecop_list_cmp,
+ .vece = MO_32 },
+ { .fni8 = gen_cle0_i64,
+ .fniv = gen_cle0_vec,
+ .opt_opc = vecop_list_cmp,
+ .prefer_i64 = TCG_TARGET_REG_BITS == 64,
+ .vece = MO_64 },
+};
+
+static void gen_cge0_i32(TCGv_i32 d, TCGv_i32 a)
+{
+ tcg_gen_setcondi_i32(TCG_COND_GE, d, a, 0);
+ tcg_gen_neg_i32(d, d);
+}
+
+static void gen_cge0_i64(TCGv_i64 d, TCGv_i64 a)
+{
+ tcg_gen_setcondi_i64(TCG_COND_GE, d, a, 0);
+ tcg_gen_neg_i64(d, d);
+}
+
+static void gen_cge0_vec(unsigned vece, TCGv_vec d, TCGv_vec a)
+{
+ TCGv_vec zero = tcg_const_zeros_vec_matching(d);
+ tcg_gen_cmp_vec(TCG_COND_GE, vece, d, a, zero);
+ tcg_temp_free_vec(zero);
+}
+
+const GVecGen2 cge0_op[4] = {
+ { .fno = gen_helper_gvec_cge0_b,
+ .fniv = gen_cge0_vec,
+ .opt_opc = vecop_list_cmp,
+ .vece = MO_8 },
+ { .fno = gen_helper_gvec_cge0_h,
+ .fniv = gen_cge0_vec,
+ .opt_opc = vecop_list_cmp,
+ .vece = MO_16 },
+ { .fni4 = gen_cge0_i32,
+ .fniv = gen_cge0_vec,
+ .opt_opc = vecop_list_cmp,
+ .vece = MO_32 },
+ { .fni8 = gen_cge0_i64,
+ .fniv = gen_cge0_vec,
+ .opt_opc = vecop_list_cmp,
+ .prefer_i64 = TCG_TARGET_REG_BITS == 64,
+ .vece = MO_64 },
+};
+
+static void gen_clt0_i32(TCGv_i32 d, TCGv_i32 a)
+{
+ tcg_gen_setcondi_i32(TCG_COND_LT, d, a, 0);
+ tcg_gen_neg_i32(d, d);
+}
+
+static void gen_clt0_i64(TCGv_i64 d, TCGv_i64 a)
+{
+ tcg_gen_setcondi_i64(TCG_COND_LT, d, a, 0);
+ tcg_gen_neg_i64(d, d);
+}
+
+static void gen_clt0_vec(unsigned vece, TCGv_vec d, TCGv_vec a)
+{
+ TCGv_vec zero = tcg_const_zeros_vec_matching(d);
+ tcg_gen_cmp_vec(TCG_COND_LT, vece, d, a, zero);
+ tcg_temp_free_vec(zero);
+}
+
+const GVecGen2 clt0_op[4] = {
+ { .fno = gen_helper_gvec_clt0_b,
+ .fniv = gen_clt0_vec,
+ .opt_opc = vecop_list_cmp,
+ .vece = MO_8 },
+ { .fno = gen_helper_gvec_clt0_h,
+ .fniv = gen_clt0_vec,
+ .opt_opc = vecop_list_cmp,
+ .vece = MO_16 },
+ { .fni4 = gen_clt0_i32,
+ .fniv = gen_clt0_vec,
+ .opt_opc = vecop_list_cmp,
+ .vece = MO_32 },
+ { .fni8 = gen_clt0_i64,
+ .fniv = gen_clt0_vec,
+ .opt_opc = vecop_list_cmp,
+ .prefer_i64 = TCG_TARGET_REG_BITS == 64,
+ .vece = MO_64 },
+};
+
+static void gen_cgt0_i32(TCGv_i32 d, TCGv_i32 a)
+{
+ tcg_gen_setcondi_i32(TCG_COND_GT, d, a, 0);
+ tcg_gen_neg_i32(d, d);
+}
+
+static void gen_cgt0_i64(TCGv_i64 d, TCGv_i64 a)
+{
+ tcg_gen_setcondi_i64(TCG_COND_GT, d, a, 0);
+ tcg_gen_neg_i64(d, d);
+}
+
+static void gen_cgt0_vec(unsigned vece, TCGv_vec d, TCGv_vec a)
+{
+ TCGv_vec zero = tcg_const_zeros_vec_matching(d);
+ tcg_gen_cmp_vec(TCG_COND_GT, vece, d, a, zero);
+ tcg_temp_free_vec(zero);
+}
+
+const GVecGen2 cgt0_op[4] = {
+ { .fno = gen_helper_gvec_cgt0_b,
+ .fniv = gen_cgt0_vec,
+ .opt_opc = vecop_list_cmp,
+ .vece = MO_8 },
+ { .fno = gen_helper_gvec_cgt0_h,
+ .fniv = gen_cgt0_vec,
+ .opt_opc = vecop_list_cmp,
+ .vece = MO_16 },
+ { .fni4 = gen_cgt0_i32,
+ .fniv = gen_cgt0_vec,
+ .opt_opc = vecop_list_cmp,
+ .vece = MO_32 },
+ { .fni8 = gen_cgt0_i64,
+ .fniv = gen_cgt0_vec,
+ .opt_opc = vecop_list_cmp,
+ .prefer_i64 = TCG_TARGET_REG_BITS == 64,
+ .vece = MO_64 },
+};
+
static void gen_ssra8_i64(TCGv_i64 d, TCGv_i64 a, int64_t shift)
{
tcg_gen_vec_sar8i_i64(a, a, shift);
@@ -6481,6 +6680,27 @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn)
tcg_gen_gvec_abs(size, rd_ofs, rm_ofs, vec_size, vec_size);
break;
+ case NEON_2RM_VCEQ0:
+ tcg_gen_gvec_2(rd_ofs, rm_ofs, vec_size,
+ vec_size, &ceq0_op[size]);
+ break;
+ case NEON_2RM_VCGT0:
+ tcg_gen_gvec_2(rd_ofs, rm_ofs, vec_size,
+ vec_size, &cgt0_op[size]);
+ break;
+ case NEON_2RM_VCLE0:
+ tcg_gen_gvec_2(rd_ofs, rm_ofs, vec_size,
+ vec_size, &cle0_op[size]);
+ break;
+ case NEON_2RM_VCGE0:
+ tcg_gen_gvec_2(rd_ofs, rm_ofs, vec_size,
+ vec_size, &cge0_op[size]);
+ break;
+ case NEON_2RM_VCLT0:
+ tcg_gen_gvec_2(rd_ofs, rm_ofs, vec_size,
+ vec_size, &clt0_op[size]);
+ break;
+
default:
elementwise:
for (pass = 0; pass < (q ? 4 : 2); pass++) {
@@ -6543,42 +6763,6 @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn)
default: abort();
}
break;
- case NEON_2RM_VCGT0: case NEON_2RM_VCLE0:
- tmp2 = tcg_const_i32(0);
- switch(size) {
- case 0: gen_helper_neon_cgt_s8(tmp, tmp, tmp2); break;
- case 1: gen_helper_neon_cgt_s16(tmp, tmp, tmp2); break;
- case 2: gen_helper_neon_cgt_s32(tmp, tmp, tmp2); break;
- default: abort();
- }
- tcg_temp_free_i32(tmp2);
- if (op == NEON_2RM_VCLE0) {
- tcg_gen_not_i32(tmp, tmp);
- }
- break;
- case NEON_2RM_VCGE0: case NEON_2RM_VCLT0:
- tmp2 = tcg_const_i32(0);
- switch(size) {
- case 0: gen_helper_neon_cge_s8(tmp, tmp, tmp2); break;
- case 1: gen_helper_neon_cge_s16(tmp, tmp, tmp2); break;
- case 2: gen_helper_neon_cge_s32(tmp, tmp, tmp2); break;
- default: abort();
- }
- tcg_temp_free_i32(tmp2);
- if (op == NEON_2RM_VCLT0) {
- tcg_gen_not_i32(tmp, tmp);
- }
- break;
- case NEON_2RM_VCEQ0:
- tmp2 = tcg_const_i32(0);
- switch(size) {
- case 0: gen_helper_neon_ceq_u8(tmp, tmp, tmp2); break;
- case 1: gen_helper_neon_ceq_u16(tmp, tmp, tmp2); break;
- case 2: gen_helper_neon_ceq_u32(tmp, tmp, tmp2); break;
- default: abort();
- }
- tcg_temp_free_i32(tmp2);
- break;
case NEON_2RM_VCGT0_F:
{
TCGv_ptr fpstatus = get_fpstatus_ptr(1);
diff --git a/target/arm/vec_helper.c b/target/arm/vec_helper.c
index 8017bd88c4c..3d534188a8b 100644
--- a/target/arm/vec_helper.c
+++ b/target/arm/vec_helper.c
@@ -1257,3 +1257,28 @@ void HELPER(sve2_pmull_h)(void *vd, void *vn, void *vm, uint32_t desc)
}
}
#endif
+
+#define DO_CMP0(NAME, TYPE, OP) \
+void HELPER(NAME)(void *vd, void *vn, uint32_t desc) \
+{ \
+ intptr_t i, opr_sz = simd_oprsz(desc); \
+ for (i = 0; i < opr_sz; i += sizeof(TYPE)) { \
+ TYPE nn = *(TYPE *)(vn + i); \
+ *(TYPE *)(vd + i) = -(nn OP 0); \
+ } \
+ clear_tail(vd, opr_sz, simd_maxsz(desc)); \
+}
+
+DO_CMP0(gvec_ceq0_b, int8_t, ==)
+DO_CMP0(gvec_clt0_b, int8_t, <)
+DO_CMP0(gvec_cle0_b, int8_t, <=)
+DO_CMP0(gvec_cgt0_b, int8_t, >)
+DO_CMP0(gvec_cge0_b, int8_t, >=)
+
+DO_CMP0(gvec_ceq0_h, int16_t, ==)
+DO_CMP0(gvec_clt0_h, int16_t, <)
+DO_CMP0(gvec_cle0_h, int16_t, <=)
+DO_CMP0(gvec_cgt0_h, int16_t, >)
+DO_CMP0(gvec_cge0_h, int16_t, >=)
+
+#undef DO_CMP0
--
2.20.1
^ permalink raw reply related [flat|nested] 40+ messages in thread* [PULL 22/31] hw/arm/virt: dt: move creation of /secure-chosen to create_fdt()
2020-04-30 11:51 [PULL 00/31] target-arm queue Peter Maydell
` (20 preceding siblings ...)
2020-04-30 11:51 ` [PULL 21/31] target/arm: Vectorize integer comparison vs zero Peter Maydell
@ 2020-04-30 11:51 ` Peter Maydell
2020-04-30 11:51 ` [PULL 23/31] hw/arm/virt: dt: add kaslr-seed property Peter Maydell
` (9 subsequent siblings)
31 siblings, 0 replies; 40+ messages in thread
From: Peter Maydell @ 2020-04-30 11:51 UTC (permalink / raw)
To: qemu-devel
From: Jerome Forissier <jerome@forissier.org>
The /secure-chosen node is currently used only by create_uart(), but
this will change. Therefore move the creation of this node to
create_fdt().
Signed-off-by: Jerome Forissier <jerome@forissier.org>
Message-id: 20200420121807.8204-2-jerome@forissier.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
hw/arm/virt.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/hw/arm/virt.c b/hw/arm/virt.c
index cca53162563..0d92674f32b 100644
--- a/hw/arm/virt.c
+++ b/hw/arm/virt.c
@@ -234,6 +234,10 @@ static void create_fdt(VirtMachineState *vms)
/* /chosen must exist for load_dtb to fill in necessary properties later */
qemu_fdt_add_subnode(fdt, "/chosen");
+ if (vms->secure) {
+ qemu_fdt_add_subnode(fdt, "/secure-chosen");
+ }
+
/* Clock node, for the benefit of the UART. The kernel device tree
* binding documentation claims the PL011 node clock properties are
* optional but in practice if you omit them the kernel refuses to
@@ -761,7 +765,6 @@ static void create_uart(const VirtMachineState *vms, int uart,
qemu_fdt_setprop_string(vms->fdt, nodename, "status", "disabled");
qemu_fdt_setprop_string(vms->fdt, nodename, "secure-status", "okay");
- qemu_fdt_add_subnode(vms->fdt, "/secure-chosen");
qemu_fdt_setprop_string(vms->fdt, "/secure-chosen", "stdout-path",
nodename);
}
--
2.20.1
^ permalink raw reply related [flat|nested] 40+ messages in thread* [PULL 23/31] hw/arm/virt: dt: add kaslr-seed property
2020-04-30 11:51 [PULL 00/31] target-arm queue Peter Maydell
` (21 preceding siblings ...)
2020-04-30 11:51 ` [PULL 22/31] hw/arm/virt: dt: move creation of /secure-chosen to create_fdt() Peter Maydell
@ 2020-04-30 11:51 ` Peter Maydell
2020-04-30 11:51 ` [PULL 24/31] target/arm: Restrict the Address Translate write operation to TCG accel Peter Maydell
` (8 subsequent siblings)
31 siblings, 0 replies; 40+ messages in thread
From: Peter Maydell @ 2020-04-30 11:51 UTC (permalink / raw)
To: qemu-devel
From: Jerome Forissier <jerome@forissier.org>
Generate random seeds to be used by the non-secure and/or secure OSes
for ASLR. The seeds are 64-bit random values exported via the DT
properties /chosen/kaslr-seed [1] and /secure-chosen/kaslr-seed, the
latter being used by OP-TEE [2].
[1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=e5bc0c37c97e1
[2] https://github.com/OP-TEE/optee_os/commit/ef262691fe0e
Signed-off-by: Jerome Forissier <jerome@forissier.org>
Message-id: 20200420121807.8204-3-jerome@forissier.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
hw/arm/virt.c | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/hw/arm/virt.c b/hw/arm/virt.c
index 0d92674f32b..626822554d5 100644
--- a/hw/arm/virt.c
+++ b/hw/arm/virt.c
@@ -77,6 +77,7 @@
#include "hw/acpi/generic_event_device.h"
#include "hw/virtio/virtio-iommu.h"
#include "hw/char/pl011.h"
+#include "qemu/guest-random.h"
#define DEFINE_VIRT_MACHINE_LATEST(major, minor, latest) \
static void virt_##major##_##minor##_class_init(ObjectClass *oc, \
@@ -213,6 +214,18 @@ static bool cpu_type_valid(const char *cpu)
return false;
}
+static void create_kaslr_seed(VirtMachineState *vms, const char *node)
+{
+ Error *err = NULL;
+ uint64_t seed;
+
+ if (qemu_guest_getrandom(&seed, sizeof(seed), &err)) {
+ error_free(err);
+ return;
+ }
+ qemu_fdt_setprop_u64(vms->fdt, node, "kaslr-seed", seed);
+}
+
static void create_fdt(VirtMachineState *vms)
{
MachineState *ms = MACHINE(vms);
@@ -233,9 +246,11 @@ static void create_fdt(VirtMachineState *vms)
/* /chosen must exist for load_dtb to fill in necessary properties later */
qemu_fdt_add_subnode(fdt, "/chosen");
+ create_kaslr_seed(vms, "/chosen");
if (vms->secure) {
qemu_fdt_add_subnode(fdt, "/secure-chosen");
+ create_kaslr_seed(vms, "/secure-chosen");
}
/* Clock node, for the benefit of the UART. The kernel device tree
--
2.20.1
^ permalink raw reply related [flat|nested] 40+ messages in thread* [PULL 24/31] target/arm: Restrict the Address Translate write operation to TCG accel
2020-04-30 11:51 [PULL 00/31] target-arm queue Peter Maydell
` (22 preceding siblings ...)
2020-04-30 11:51 ` [PULL 23/31] hw/arm/virt: dt: add kaslr-seed property Peter Maydell
@ 2020-04-30 11:51 ` Peter Maydell
2020-04-30 11:51 ` [PULL 25/31] target/arm: Make cpu_register() available for other files Peter Maydell
` (7 subsequent siblings)
31 siblings, 0 replies; 40+ messages in thread
From: Peter Maydell @ 2020-04-30 11:51 UTC (permalink / raw)
To: qemu-devel
From: Philippe Mathieu-Daudé <philmd@redhat.com>
Under KVM these registers are written by the hardware.
Restrict the writefn handlers to TCG to avoid when building
without TCG:
LINK aarch64-softmmu/qemu-system-aarch64
target/arm/helper.o: In function `do_ats_write':
target/arm/helper.c:3524: undefined reference to `raise_exception'
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200423073358.27155-2-philmd@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
target/arm/helper.c | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
diff --git a/target/arm/helper.c b/target/arm/helper.c
index 7e9ea5d20fa..dfefb9b3d9b 100644
--- a/target/arm/helper.c
+++ b/target/arm/helper.c
@@ -3442,6 +3442,7 @@ static CPAccessResult ats_access(CPUARMState *env, const ARMCPRegInfo *ri,
return CP_ACCESS_OK;
}
+#ifdef CONFIG_TCG
static uint64_t do_ats_write(CPUARMState *env, uint64_t value,
MMUAccessType access_type, ARMMMUIdx mmu_idx)
{
@@ -3602,9 +3603,11 @@ static uint64_t do_ats_write(CPUARMState *env, uint64_t value,
}
return par64;
}
+#endif /* CONFIG_TCG */
static void ats_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value)
{
+#ifdef CONFIG_TCG
MMUAccessType access_type = ri->opc2 & 1 ? MMU_DATA_STORE : MMU_DATA_LOAD;
uint64_t par64;
ARMMMUIdx mmu_idx;
@@ -3664,17 +3667,26 @@ static void ats_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value)
par64 = do_ats_write(env, value, access_type, mmu_idx);
A32_BANKED_CURRENT_REG_SET(env, par, par64);
+#else
+ /* Handled by hardware accelerator. */
+ g_assert_not_reached();
+#endif /* CONFIG_TCG */
}
static void ats1h_write(CPUARMState *env, const ARMCPRegInfo *ri,
uint64_t value)
{
+#ifdef CONFIG_TCG
MMUAccessType access_type = ri->opc2 & 1 ? MMU_DATA_STORE : MMU_DATA_LOAD;
uint64_t par64;
par64 = do_ats_write(env, value, access_type, ARMMMUIdx_E2);
A32_BANKED_CURRENT_REG_SET(env, par, par64);
+#else
+ /* Handled by hardware accelerator. */
+ g_assert_not_reached();
+#endif /* CONFIG_TCG */
}
static CPAccessResult at_s1e2_access(CPUARMState *env, const ARMCPRegInfo *ri,
@@ -3689,6 +3701,7 @@ static CPAccessResult at_s1e2_access(CPUARMState *env, const ARMCPRegInfo *ri,
static void ats_write64(CPUARMState *env, const ARMCPRegInfo *ri,
uint64_t value)
{
+#ifdef CONFIG_TCG
MMUAccessType access_type = ri->opc2 & 1 ? MMU_DATA_STORE : MMU_DATA_LOAD;
ARMMMUIdx mmu_idx;
int secure = arm_is_secure_below_el3(env);
@@ -3728,6 +3741,10 @@ static void ats_write64(CPUARMState *env, const ARMCPRegInfo *ri,
}
env->cp15.par_el[1] = do_ats_write(env, value, access_type, mmu_idx);
+#else
+ /* Handled by hardware accelerator. */
+ g_assert_not_reached();
+#endif /* CONFIG_TCG */
}
#endif
--
2.20.1
^ permalink raw reply related [flat|nested] 40+ messages in thread* [PULL 25/31] target/arm: Make cpu_register() available for other files
2020-04-30 11:51 [PULL 00/31] target-arm queue Peter Maydell
` (23 preceding siblings ...)
2020-04-30 11:51 ` [PULL 24/31] target/arm: Restrict the Address Translate write operation to TCG accel Peter Maydell
@ 2020-04-30 11:51 ` Peter Maydell
2020-04-30 11:51 ` [PULL 26/31] target/arm/cpu: Use ARRAY_SIZE() to iterate over ARMCPUInfo[] Peter Maydell
` (6 subsequent siblings)
31 siblings, 0 replies; 40+ messages in thread
From: Peter Maydell @ 2020-04-30 11:51 UTC (permalink / raw)
To: qemu-devel
From: Thomas Huth <thuth@redhat.com>
Make cpu_register() (renamed to arm_cpu_register()) available
from internals.h so we can register CPUs also from other files
in the future.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200423073358.27155-3-philmd@redhat.com
Message-ID: <20190921150420.30743-2-thuth@redhat.com>
[PMD: Only take cpu_register() from Thomas's patch]
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
target/arm/cpu-qom.h | 9 ++++++++-
target/arm/cpu.c | 10 ++--------
target/arm/cpu64.c | 8 +-------
3 files changed, 11 insertions(+), 16 deletions(-)
diff --git a/target/arm/cpu-qom.h b/target/arm/cpu-qom.h
index d95568bf052..56395b87f62 100644
--- a/target/arm/cpu-qom.h
+++ b/target/arm/cpu-qom.h
@@ -35,7 +35,14 @@ struct arm_boot_info;
#define TYPE_ARM_MAX_CPU "max-" TYPE_ARM_CPU
-typedef struct ARMCPUInfo ARMCPUInfo;
+typedef struct ARMCPUInfo {
+ const char *name;
+ void (*initfn)(Object *obj);
+ void (*class_init)(ObjectClass *oc, void *data);
+} ARMCPUInfo;
+
+void arm_cpu_register(const ARMCPUInfo *info);
+void aarch64_cpu_register(const ARMCPUInfo *info);
/**
* ARMCPUClass:
diff --git a/target/arm/cpu.c b/target/arm/cpu.c
index a79f233b170..47e35400da2 100644
--- a/target/arm/cpu.c
+++ b/target/arm/cpu.c
@@ -2693,12 +2693,6 @@ static void arm_max_initfn(Object *obj)
#endif /* !defined(CONFIG_USER_ONLY) || !defined(TARGET_AARCH64) */
-struct ARMCPUInfo {
- const char *name;
- void (*initfn)(Object *obj);
- void (*class_init)(ObjectClass *oc, void *data);
-};
-
static const ARMCPUInfo arm_cpus[] = {
#if !defined(CONFIG_USER_ONLY) || !defined(TARGET_AARCH64)
{ .name = "arm926", .initfn = arm926_initfn },
@@ -2864,7 +2858,7 @@ static void cpu_register_class_init(ObjectClass *oc, void *data)
acc->info = data;
}
-static void cpu_register(const ARMCPUInfo *info)
+void arm_cpu_register(const ARMCPUInfo *info)
{
TypeInfo type_info = {
.parent = TYPE_ARM_CPU,
@@ -2905,7 +2899,7 @@ static void arm_cpu_register_types(void)
type_register_static(&idau_interface_type_info);
while (info->name) {
- cpu_register(info);
+ arm_cpu_register(info);
info++;
}
diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c
index 95d0c8c101a..74afc28d537 100644
--- a/target/arm/cpu64.c
+++ b/target/arm/cpu64.c
@@ -737,12 +737,6 @@ static void aarch64_max_initfn(Object *obj)
cpu_max_set_sve_max_vq, NULL, NULL, &error_fatal);
}
-struct ARMCPUInfo {
- const char *name;
- void (*initfn)(Object *obj);
- void (*class_init)(ObjectClass *oc, void *data);
-};
-
static const ARMCPUInfo aarch64_cpus[] = {
{ .name = "cortex-a57", .initfn = aarch64_a57_initfn },
{ .name = "cortex-a53", .initfn = aarch64_a53_initfn },
@@ -825,7 +819,7 @@ static void cpu_register_class_init(ObjectClass *oc, void *data)
acc->info = data;
}
-static void aarch64_cpu_register(const ARMCPUInfo *info)
+void aarch64_cpu_register(const ARMCPUInfo *info)
{
TypeInfo type_info = {
.parent = TYPE_AARCH64_CPU,
--
2.20.1
^ permalink raw reply related [flat|nested] 40+ messages in thread* [PULL 26/31] target/arm/cpu: Use ARRAY_SIZE() to iterate over ARMCPUInfo[]
2020-04-30 11:51 [PULL 00/31] target-arm queue Peter Maydell
` (24 preceding siblings ...)
2020-04-30 11:51 ` [PULL 25/31] target/arm: Make cpu_register() available for other files Peter Maydell
@ 2020-04-30 11:51 ` Peter Maydell
2020-04-30 14:30 ` Peter Maydell
2020-04-30 11:51 ` [PULL 27/31] target/arm/cpu: Update coding style to make checkpatch.pl happy Peter Maydell
` (5 subsequent siblings)
31 siblings, 1 reply; 40+ messages in thread
From: Peter Maydell @ 2020-04-30 11:51 UTC (permalink / raw)
To: qemu-devel
From: Philippe Mathieu-Daudé <philmd@redhat.com>
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200423073358.27155-4-philmd@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
target/arm/cpu.c | 8 +++-----
target/arm/cpu64.c | 8 +++-----
2 files changed, 6 insertions(+), 10 deletions(-)
diff --git a/target/arm/cpu.c b/target/arm/cpu.c
index 47e35400da2..30e961f7754 100644
--- a/target/arm/cpu.c
+++ b/target/arm/cpu.c
@@ -2745,7 +2745,6 @@ static const ARMCPUInfo arm_cpus[] = {
{ .name = "any", .initfn = arm_max_initfn },
#endif
#endif
- { .name = NULL }
};
static Property arm_cpu_properties[] = {
@@ -2893,14 +2892,13 @@ static const TypeInfo idau_interface_type_info = {
static void arm_cpu_register_types(void)
{
- const ARMCPUInfo *info = arm_cpus;
+ size_t i;
type_register_static(&arm_cpu_type_info);
type_register_static(&idau_interface_type_info);
- while (info->name) {
- arm_cpu_register(info);
- info++;
+ for (i = 0; i < ARRAY_SIZE(arm_cpus); ++i) {
+ arm_cpu_register(&arm_cpus[i]);
}
#ifdef CONFIG_KVM
diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c
index 74afc28d537..b8177f59f5a 100644
--- a/target/arm/cpu64.c
+++ b/target/arm/cpu64.c
@@ -742,7 +742,6 @@ static const ARMCPUInfo aarch64_cpus[] = {
{ .name = "cortex-a53", .initfn = aarch64_a53_initfn },
{ .name = "cortex-a72", .initfn = aarch64_a72_initfn },
{ .name = "max", .initfn = aarch64_max_initfn },
- { .name = NULL }
};
static bool aarch64_cpu_get_aarch64(Object *obj, Error **errp)
@@ -848,13 +847,12 @@ static const TypeInfo aarch64_cpu_type_info = {
static void aarch64_cpu_register_types(void)
{
- const ARMCPUInfo *info = aarch64_cpus;
+ size_t i;
type_register_static(&aarch64_cpu_type_info);
- while (info->name) {
- aarch64_cpu_register(info);
- info++;
+ for (i = 0; i < ARRAY_SIZE(aarch64_cpus); ++i) {
+ aarch64_cpu_register(&aarch64_cpus[i]);
}
}
--
2.20.1
^ permalink raw reply related [flat|nested] 40+ messages in thread* Re: [PULL 26/31] target/arm/cpu: Use ARRAY_SIZE() to iterate over ARMCPUInfo[]
2020-04-30 11:51 ` [PULL 26/31] target/arm/cpu: Use ARRAY_SIZE() to iterate over ARMCPUInfo[] Peter Maydell
@ 2020-04-30 14:30 ` Peter Maydell
0 siblings, 0 replies; 40+ messages in thread
From: Peter Maydell @ 2020-04-30 14:30 UTC (permalink / raw)
To: QEMU Developers; +Cc: Philippe Mathieu-Daudé
On Thu, 30 Apr 2020 at 12:52, Peter Maydell <peter.maydell@linaro.org> wrote:
>
> From: Philippe Mathieu-Daudé <philmd@redhat.com>
>
> Suggested-by: Richard Henderson <richard.henderson@linaro.org>
> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
> Message-id: 20200423073358.27155-4-philmd@redhat.com
> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This causes compile errors on configs where the array
ends up empty:
/home/pm/qemu/target/arm/cpu.c: In function ‘arm_cpu_register_types’:
/home/pm/qemu/target/arm/cpu.c:2903:19: error: comparison of unsigned
expression < 0 is always false [-Werror=type-limits]
for (i = 0; i < ARRAY_SIZE(arm_cpus); ++i) {
^
I've dropped the patch from the pullreq.
thanks
-- PMM
^ permalink raw reply [flat|nested] 40+ messages in thread
* [PULL 27/31] target/arm/cpu: Update coding style to make checkpatch.pl happy
2020-04-30 11:51 [PULL 00/31] target-arm queue Peter Maydell
` (25 preceding siblings ...)
2020-04-30 11:51 ` [PULL 26/31] target/arm/cpu: Use ARRAY_SIZE() to iterate over ARMCPUInfo[] Peter Maydell
@ 2020-04-30 11:51 ` Peter Maydell
2020-04-30 14:52 ` Philippe Mathieu-Daudé
2020-04-30 11:51 ` [PULL 28/31] device_tree: Allow name wildcards in qemu_fdt_node_path() Peter Maydell
` (4 subsequent siblings)
31 siblings, 1 reply; 40+ messages in thread
From: Peter Maydell @ 2020-04-30 11:51 UTC (permalink / raw)
To: qemu-devel
From: Philippe Mathieu-Daudé <philmd@redhat.com>
We will move this code in the next commit. Clean it up
first to avoid checkpatch.pl errors.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200423073358.27155-5-philmd@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
target/arm/cpu.c | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/target/arm/cpu.c b/target/arm/cpu.c
index 30e961f7754..a1e38b38ba1 100644
--- a/target/arm/cpu.c
+++ b/target/arm/cpu.c
@@ -582,7 +582,8 @@ static bool arm_v7m_cpu_exec_interrupt(CPUState *cs, int interrupt_request)
CPUARMState *env = &cpu->env;
bool ret = false;
- /* ARMv7-M interrupt masking works differently than -A or -R.
+ /*
+ * ARMv7-M interrupt masking works differently than -A or -R.
* There is no FIQ/IRQ distinction. Instead of I and F bits
* masking FIQ and IRQ interrupts, an exception is taken only
* if it is higher priority than the current execution priority
@@ -1912,7 +1913,8 @@ static void arm1026_initfn(Object *obj)
static void arm1136_r2_initfn(Object *obj)
{
ARMCPU *cpu = ARM_CPU(obj);
- /* What qemu calls "arm1136_r2" is actually the 1136 r0p2, ie an
+ /*
+ * What qemu calls "arm1136_r2" is actually the 1136 r0p2, ie an
* older core than plain "arm1136". In particular this does not
* have the v6K features.
* These ID register values are correct for 1136 but may be wrong
@@ -2698,7 +2700,8 @@ static const ARMCPUInfo arm_cpus[] = {
{ .name = "arm926", .initfn = arm926_initfn },
{ .name = "arm946", .initfn = arm946_initfn },
{ .name = "arm1026", .initfn = arm1026_initfn },
- /* What QEMU calls "arm1136-r2" is actually the 1136 r0p2, i.e. an
+ /*
+ * What QEMU calls "arm1136-r2" is actually the 1136 r0p2, i.e. an
* older core than plain "arm1136". In particular this does not
* have the v6K features.
*/
--
2.20.1
^ permalink raw reply related [flat|nested] 40+ messages in thread* Re: [PULL 27/31] target/arm/cpu: Update coding style to make checkpatch.pl happy
2020-04-30 11:51 ` [PULL 27/31] target/arm/cpu: Update coding style to make checkpatch.pl happy Peter Maydell
@ 2020-04-30 14:52 ` Philippe Mathieu-Daudé
0 siblings, 0 replies; 40+ messages in thread
From: Philippe Mathieu-Daudé @ 2020-04-30 14:52 UTC (permalink / raw)
To: Peter Maydell, qemu-devel
On 4/30/20 1:51 PM, Peter Maydell wrote:
> From: Philippe Mathieu-Daudé <philmd@redhat.com>
>
> We will move this code in the next commit. Clean it up
> first to avoid checkpatch.pl errors.
Oops this isn't the next commit anymore :S
>
> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
> Message-id: 20200423073358.27155-5-philmd@redhat.com
> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
> ---
> target/arm/cpu.c | 9 ++++++---
> 1 file changed, 6 insertions(+), 3 deletions(-)
>
> diff --git a/target/arm/cpu.c b/target/arm/cpu.c
> index 30e961f7754..a1e38b38ba1 100644
> --- a/target/arm/cpu.c
> +++ b/target/arm/cpu.c
> @@ -582,7 +582,8 @@ static bool arm_v7m_cpu_exec_interrupt(CPUState *cs, int interrupt_request)
> CPUARMState *env = &cpu->env;
> bool ret = false;
>
> - /* ARMv7-M interrupt masking works differently than -A or -R.
> + /*
> + * ARMv7-M interrupt masking works differently than -A or -R.
> * There is no FIQ/IRQ distinction. Instead of I and F bits
> * masking FIQ and IRQ interrupts, an exception is taken only
> * if it is higher priority than the current execution priority
> @@ -1912,7 +1913,8 @@ static void arm1026_initfn(Object *obj)
> static void arm1136_r2_initfn(Object *obj)
> {
> ARMCPU *cpu = ARM_CPU(obj);
> - /* What qemu calls "arm1136_r2" is actually the 1136 r0p2, ie an
> + /*
> + * What qemu calls "arm1136_r2" is actually the 1136 r0p2, ie an
> * older core than plain "arm1136". In particular this does not
> * have the v6K features.
> * These ID register values are correct for 1136 but may be wrong
> @@ -2698,7 +2700,8 @@ static const ARMCPUInfo arm_cpus[] = {
> { .name = "arm926", .initfn = arm926_initfn },
> { .name = "arm946", .initfn = arm946_initfn },
> { .name = "arm1026", .initfn = arm1026_initfn },
> - /* What QEMU calls "arm1136-r2" is actually the 1136 r0p2, i.e. an
> + /*
> + * What QEMU calls "arm1136-r2" is actually the 1136 r0p2, i.e. an
> * older core than plain "arm1136". In particular this does not
> * have the v6K features.
> */
>
^ permalink raw reply [flat|nested] 40+ messages in thread
* [PULL 28/31] device_tree: Allow name wildcards in qemu_fdt_node_path()
2020-04-30 11:51 [PULL 00/31] target-arm queue Peter Maydell
` (26 preceding siblings ...)
2020-04-30 11:51 ` [PULL 27/31] target/arm/cpu: Update coding style to make checkpatch.pl happy Peter Maydell
@ 2020-04-30 11:51 ` Peter Maydell
2020-04-30 11:51 ` [PULL 29/31] device_tree: Constify compat " Peter Maydell
` (3 subsequent siblings)
31 siblings, 0 replies; 40+ messages in thread
From: Peter Maydell @ 2020-04-30 11:51 UTC (permalink / raw)
To: qemu-devel
From: "Edgar E. Iglesias" <edgar.iglesias@xilinx.com>
Allow name wildcards in qemu_fdt_node_path(). This is useful
to find all nodes with a given compatibility string.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20200423121114.4274-2-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
include/sysemu/device_tree.h | 3 +++
device_tree.c | 2 +-
2 files changed, 4 insertions(+), 1 deletion(-)
diff --git a/include/sysemu/device_tree.h b/include/sysemu/device_tree.h
index c16fd69bc0b..7c53ef76345 100644
--- a/include/sysemu/device_tree.h
+++ b/include/sysemu/device_tree.h
@@ -39,6 +39,9 @@ void *load_device_tree_from_sysfs(void);
* NULL. If there is no error but no matching node was found, the
* returned array contains a single element equal to NULL. If an error
* was encountered when parsing the blob, the function returns NULL
+ *
+ * @name may be NULL to wildcard names and only match compatibility
+ * strings.
*/
char **qemu_fdt_node_path(void *fdt, const char *name, char *compat,
Error **errp);
diff --git a/device_tree.c b/device_tree.c
index bba6cc21641..f5b4699aedb 100644
--- a/device_tree.c
+++ b/device_tree.c
@@ -308,7 +308,7 @@ char **qemu_fdt_node_path(void *fdt, const char *name, char *compat,
offset = len;
break;
}
- if (!strcmp(iter_name, name)) {
+ if (!name || !strcmp(iter_name, name)) {
char *path;
path = g_malloc(path_len);
--
2.20.1
^ permalink raw reply related [flat|nested] 40+ messages in thread* [PULL 29/31] device_tree: Constify compat in qemu_fdt_node_path()
2020-04-30 11:51 [PULL 00/31] target-arm queue Peter Maydell
` (27 preceding siblings ...)
2020-04-30 11:51 ` [PULL 28/31] device_tree: Allow name wildcards in qemu_fdt_node_path() Peter Maydell
@ 2020-04-30 11:51 ` Peter Maydell
2020-04-30 11:51 ` [PULL 30/31] hw/arm: xlnx-zcu102: Move arm_boot_info into XlnxZCU102 Peter Maydell
` (2 subsequent siblings)
31 siblings, 0 replies; 40+ messages in thread
From: Peter Maydell @ 2020-04-30 11:51 UTC (permalink / raw)
To: qemu-devel
From: "Edgar E. Iglesias" <edgar.iglesias@xilinx.com>
Make compat in qemu_fdt_node_path() const char *.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20200423121114.4274-3-edgar.iglesias@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
include/sysemu/device_tree.h | 2 +-
device_tree.c | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/include/sysemu/device_tree.h b/include/sysemu/device_tree.h
index 7c53ef76345..982c89345f8 100644
--- a/include/sysemu/device_tree.h
+++ b/include/sysemu/device_tree.h
@@ -43,7 +43,7 @@ void *load_device_tree_from_sysfs(void);
* @name may be NULL to wildcard names and only match compatibility
* strings.
*/
-char **qemu_fdt_node_path(void *fdt, const char *name, char *compat,
+char **qemu_fdt_node_path(void *fdt, const char *name, const char *compat,
Error **errp);
/**
diff --git a/device_tree.c b/device_tree.c
index f5b4699aedb..b335dae7075 100644
--- a/device_tree.c
+++ b/device_tree.c
@@ -291,7 +291,7 @@ char **qemu_fdt_node_unit_path(void *fdt, const char *name, Error **errp)
return path_array;
}
-char **qemu_fdt_node_path(void *fdt, const char *name, char *compat,
+char **qemu_fdt_node_path(void *fdt, const char *name, const char *compat,
Error **errp)
{
int offset, len, ret;
--
2.20.1
^ permalink raw reply related [flat|nested] 40+ messages in thread* [PULL 30/31] hw/arm: xlnx-zcu102: Move arm_boot_info into XlnxZCU102
2020-04-30 11:51 [PULL 00/31] target-arm queue Peter Maydell
` (28 preceding siblings ...)
2020-04-30 11:51 ` [PULL 29/31] device_tree: Constify compat " Peter Maydell
@ 2020-04-30 11:51 ` Peter Maydell
2020-04-30 11:51 ` [PULL 31/31] hw/arm: xlnx-zcu102: Disable unsupported FDT firmware nodes Peter Maydell
2020-05-01 2:05 ` [PULL 00/31] target-arm queue no-reply
31 siblings, 0 replies; 40+ messages in thread
From: Peter Maydell @ 2020-04-30 11:51 UTC (permalink / raw)
To: qemu-devel
From: "Edgar E. Iglesias" <edgar.iglesias@xilinx.com>
Move arm_boot_info into XlnxZCU102.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20200423121114.4274-4-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
hw/arm/xlnx-zcu102.c | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)
diff --git a/hw/arm/xlnx-zcu102.c b/hw/arm/xlnx-zcu102.c
index bd645ad8187..4eb117c755a 100644
--- a/hw/arm/xlnx-zcu102.c
+++ b/hw/arm/xlnx-zcu102.c
@@ -31,13 +31,14 @@ typedef struct XlnxZCU102 {
bool secure;
bool virt;
+
+ struct arm_boot_info binfo;
} XlnxZCU102;
#define TYPE_ZCU102_MACHINE MACHINE_TYPE_NAME("xlnx-zcu102")
#define ZCU102_MACHINE(obj) \
OBJECT_CHECK(XlnxZCU102, (obj), TYPE_ZCU102_MACHINE)
-static struct arm_boot_info xlnx_zcu102_binfo;
static bool zcu102_get_secure(Object *obj, Error **errp)
{
@@ -166,9 +167,9 @@ static void xlnx_zcu102_init(MachineState *machine)
/* TODO create and connect IDE devices for ide_drive_get() */
- xlnx_zcu102_binfo.ram_size = ram_size;
- xlnx_zcu102_binfo.loader_start = 0;
- arm_load_kernel(s->soc.boot_cpu_ptr, machine, &xlnx_zcu102_binfo);
+ s->binfo.ram_size = ram_size;
+ s->binfo.loader_start = 0;
+ arm_load_kernel(s->soc.boot_cpu_ptr, machine, &s->binfo);
}
static void xlnx_zcu102_machine_instance_init(Object *obj)
--
2.20.1
^ permalink raw reply related [flat|nested] 40+ messages in thread* [PULL 31/31] hw/arm: xlnx-zcu102: Disable unsupported FDT firmware nodes
2020-04-30 11:51 [PULL 00/31] target-arm queue Peter Maydell
` (29 preceding siblings ...)
2020-04-30 11:51 ` [PULL 30/31] hw/arm: xlnx-zcu102: Move arm_boot_info into XlnxZCU102 Peter Maydell
@ 2020-04-30 11:51 ` Peter Maydell
2020-05-01 2:05 ` [PULL 00/31] target-arm queue no-reply
31 siblings, 0 replies; 40+ messages in thread
From: Peter Maydell @ 2020-04-30 11:51 UTC (permalink / raw)
To: qemu-devel
From: "Edgar E. Iglesias" <edgar.iglesias@xilinx.com>
Disable unsupported FDT firmware nodes if a user passes us
a DTB with nodes enabled that the machine cannot support
due to lack of EL3 or EL2 support.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20200423121114.4274-5-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
hw/arm/xlnx-zcu102.c | 30 ++++++++++++++++++++++++++++++
1 file changed, 30 insertions(+)
diff --git a/hw/arm/xlnx-zcu102.c b/hw/arm/xlnx-zcu102.c
index 4eb117c755a..a798e228b79 100644
--- a/hw/arm/xlnx-zcu102.c
+++ b/hw/arm/xlnx-zcu102.c
@@ -23,6 +23,7 @@
#include "qemu/error-report.h"
#include "qemu/log.h"
#include "sysemu/qtest.h"
+#include "sysemu/device_tree.h"
typedef struct XlnxZCU102 {
MachineState parent_obj;
@@ -68,6 +69,34 @@ static void zcu102_set_virt(Object *obj, bool value, Error **errp)
s->virt = value;
}
+static void zcu102_modify_dtb(const struct arm_boot_info *binfo, void *fdt)
+{
+ XlnxZCU102 *s = container_of(binfo, XlnxZCU102, binfo);
+ bool method_is_hvc;
+ char **node_path;
+ const char *r;
+ int prop_len;
+ int i;
+
+ /* If EL3 is enabled, we keep all firmware nodes active. */
+ if (!s->secure) {
+ node_path = qemu_fdt_node_path(fdt, NULL, "xlnx,zynqmp-firmware",
+ &error_fatal);
+
+ for (i = 0; node_path && node_path[i]; i++) {
+ r = qemu_fdt_getprop(fdt, node_path[i], "method", &prop_len, NULL);
+ method_is_hvc = r && !strcmp("hvc", r);
+
+ /* Allow HVC based firmware if EL2 is enabled. */
+ if (method_is_hvc && s->virt) {
+ continue;
+ }
+ qemu_fdt_setprop_string(fdt, node_path[i], "status", "disabled");
+ }
+ g_strfreev(node_path);
+ }
+}
+
static void xlnx_zcu102_init(MachineState *machine)
{
XlnxZCU102 *s = ZCU102_MACHINE(machine);
@@ -169,6 +198,7 @@ static void xlnx_zcu102_init(MachineState *machine)
s->binfo.ram_size = ram_size;
s->binfo.loader_start = 0;
+ s->binfo.modify_dtb = zcu102_modify_dtb;
arm_load_kernel(s->soc.boot_cpu_ptr, machine, &s->binfo);
}
--
2.20.1
^ permalink raw reply related [flat|nested] 40+ messages in thread* Re: [PULL 00/31] target-arm queue
2020-04-30 11:51 [PULL 00/31] target-arm queue Peter Maydell
` (30 preceding siblings ...)
2020-04-30 11:51 ` [PULL 31/31] hw/arm: xlnx-zcu102: Disable unsupported FDT firmware nodes Peter Maydell
@ 2020-05-01 2:05 ` no-reply
31 siblings, 0 replies; 40+ messages in thread
From: no-reply @ 2020-05-01 2:05 UTC (permalink / raw)
To: peter.maydell; +Cc: qemu-devel
Patchew URL: https://patchew.org/QEMU/20200430115142.13430-1-peter.maydell@linaro.org/
Hi,
This series seems to have some coding style problems. See output below for
more information:
Message-id: 20200430115142.13430-1-peter.maydell@linaro.org
Subject: [PULL 00/31] target-arm queue
Type: series
=== TEST SCRIPT BEGIN ===
#!/bin/bash
git rev-parse base > /dev/null || exit 0
git config --local diff.renamelimit 0
git config --local diff.renames True
git config --local diff.algorithm histogram
./scripts/checkpatch.pl --mailback base..
=== TEST SCRIPT END ===
Updating 3c8cf5a9c21ff8782164d1def7f44bd888713384
Switched to a new branch 'test'
cc6c93a hw/arm: xlnx-zcu102: Disable unsupported FDT firmware nodes
851a774 hw/arm: xlnx-zcu102: Move arm_boot_info into XlnxZCU102
cb4770a device_tree: Constify compat in qemu_fdt_node_path()
a26ed36 device_tree: Allow name wildcards in qemu_fdt_node_path()
0c7b245 target/arm/cpu: Update coding style to make checkpatch.pl happy
6e87116 target/arm/cpu: Use ARRAY_SIZE() to iterate over ARMCPUInfo[]
ac5d9f2 target/arm: Make cpu_register() available for other files
1f8dbd1 target/arm: Restrict the Address Translate write operation to TCG accel
26c5aa2 hw/arm/virt: dt: add kaslr-seed property
256d88c hw/arm/virt: dt: move creation of /secure-chosen to create_fdt()
281ba0a target/arm: Vectorize integer comparison vs zero
d335551 net: cadence_gem: clear RX control descriptor
886d104 Cadence: gem: fix wraparound in 64bit descriptors
adab3ff hw/arm: versal: Setup the ADMA with 128bit bus-width
9ff65f3 qdev-monitor: print the device's clock with info qtree
ea507fb hw/arm/xilinx_zynq: connect uart clocks to slcr
abd4b39 hw/char/cadence_uart: add clock support
02a7d87 hw/misc/zynq_slcr: add clock generation for uarts
947bc22 docs/clocks: add device's clock documentation
49f9409 qdev-clock: introduce an init array to ease the device construction
6b7b97c qdev: add clock input&output support to devices.
62643a6 hw/core/clock-vmstate: define a vmstate entry for clock state
d7158be hw/core/clock: introduce clock object
de7c1af tests/boot_linux_console: Add ethernet test to SmartFusion2
2dd76b4 msf2: Add EMAC block to SmartFusion2 SoC
bf46971 hw/net: Add Smartfusion2 emac block
0af4051 Typo: Correct the name of CPU hotplug memory region
fb7f6b0 bugfix: Use gicr_typer in arm_gicv3_icc_reset
95a592a nrf51: Fix last GPIO CNF address
00478e2 dma/xlnx-zdma: Fix descriptor loading (REG) wrt endianness
7fec387 dma/xlnx-zdma: Fix descriptor loading (MEM) wrt endianness
=== OUTPUT BEGIN ===
1/31 Checking commit 7fec38768f4a (dma/xlnx-zdma: Fix descriptor loading (MEM) wrt endianness)
2/31 Checking commit 00478e21e556 (dma/xlnx-zdma: Fix descriptor loading (REG) wrt endianness)
3/31 Checking commit 95a592a9ca01 (nrf51: Fix last GPIO CNF address)
4/31 Checking commit fb7f6b03b3bd (bugfix: Use gicr_typer in arm_gicv3_icc_reset)
5/31 Checking commit 0af4051edd5b (Typo: Correct the name of CPU hotplug memory region)
6/31 Checking commit bf46971ba6f8 (hw/net: Add Smartfusion2 emac block)
WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
#41:
new file mode 100644
total: 0 errors, 1 warnings, 654 lines checked
Patch 6/31 has style problems, please review. If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
7/31 Checking commit 2dd76b4a530d (msf2: Add EMAC block to SmartFusion2 SoC)
8/31 Checking commit de7c1af6c5fa (tests/boot_linux_console: Add ethernet test to SmartFusion2)
9/31 Checking commit d7158be1a4b6 (hw/core/clock: introduce clock object)
WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
#42:
new file mode 100644
total: 0 errors, 1 warnings, 363 lines checked
Patch 9/31 has style problems, please review. If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
10/31 Checking commit 62643a6e45ee (hw/core/clock-vmstate: define a vmstate entry for clock state)
WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
#29:
new file mode 100644
total: 0 errors, 1 warnings, 47 lines checked
Patch 10/31 has style problems, please review. If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
11/31 Checking commit 6b7b97c06fc4 (qdev: add clock input&output support to devices.)
WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
#35:
new file mode 100644
total: 0 errors, 1 warnings, 353 lines checked
Patch 11/31 has style problems, please review. If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
12/31 Checking commit 49f9409e6aba (qdev-clock: introduce an init array to ease the device construction)
13/31 Checking commit 947bc2295320 (docs/clocks: add device's clock documentation)
WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
#22:
new file mode 100644
total: 0 errors, 1 warnings, 395 lines checked
Patch 13/31 has style problems, please review. If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
14/31 Checking commit 02a7d875317b (hw/misc/zynq_slcr: add clock generation for uarts)
15/31 Checking commit abd4b39e45cc (hw/char/cadence_uart: add clock support)
16/31 Checking commit ea507fb82a69 (hw/arm/xilinx_zynq: connect uart clocks to slcr)
17/31 Checking commit 9ff65f39fc29 (qdev-monitor: print the device's clock with info qtree)
18/31 Checking commit adab3ff8d273 (hw/arm: versal: Setup the ADMA with 128bit bus-width)
19/31 Checking commit 886d104dd971 (Cadence: gem: fix wraparound in 64bit descriptors)
20/31 Checking commit d335551dccc5 (net: cadence_gem: clear RX control descriptor)
21/31 Checking commit 281ba0a4e829 (target/arm: Vectorize integer comparison vs zero)
ERROR: spaces required around that '==' (ctx:WxB)
#529: FILE: target/arm/vec_helper.c:1272:
+DO_CMP0(gvec_ceq0_b, int8_t, ==)
^
ERROR: spaces required around that '<' (ctx:WxB)
#530: FILE: target/arm/vec_helper.c:1273:
+DO_CMP0(gvec_clt0_b, int8_t, <)
^
ERROR: spaces required around that '<=' (ctx:WxB)
#531: FILE: target/arm/vec_helper.c:1274:
+DO_CMP0(gvec_cle0_b, int8_t, <=)
^
ERROR: spaces required around that '>' (ctx:WxB)
#532: FILE: target/arm/vec_helper.c:1275:
+DO_CMP0(gvec_cgt0_b, int8_t, >)
^
ERROR: spaces required around that '>=' (ctx:WxB)
#533: FILE: target/arm/vec_helper.c:1276:
+DO_CMP0(gvec_cge0_b, int8_t, >=)
^
ERROR: spaces required around that '==' (ctx:WxB)
#535: FILE: target/arm/vec_helper.c:1278:
+DO_CMP0(gvec_ceq0_h, int16_t, ==)
^
ERROR: spaces required around that '<' (ctx:WxB)
#536: FILE: target/arm/vec_helper.c:1279:
+DO_CMP0(gvec_clt0_h, int16_t, <)
^
ERROR: spaces required around that '<=' (ctx:WxB)
#537: FILE: target/arm/vec_helper.c:1280:
+DO_CMP0(gvec_cle0_h, int16_t, <=)
^
ERROR: spaces required around that '>' (ctx:WxB)
#538: FILE: target/arm/vec_helper.c:1281:
+DO_CMP0(gvec_cgt0_h, int16_t, >)
^
ERROR: spaces required around that '>=' (ctx:WxB)
#539: FILE: target/arm/vec_helper.c:1282:
+DO_CMP0(gvec_cge0_h, int16_t, >=)
^
total: 10 errors, 0 warnings, 488 lines checked
Patch 21/31 has style problems, please review. If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
22/31 Checking commit 256d88c8ec50 (hw/arm/virt: dt: move creation of /secure-chosen to create_fdt())
23/31 Checking commit 26c5aa2e8033 (hw/arm/virt: dt: add kaslr-seed property)
24/31 Checking commit 1f8dbd12050f (target/arm: Restrict the Address Translate write operation to TCG accel)
25/31 Checking commit ac5d9f2b0eab (target/arm: Make cpu_register() available for other files)
26/31 Checking commit 6e87116ad76d (target/arm/cpu: Use ARRAY_SIZE() to iterate over ARMCPUInfo[])
27/31 Checking commit 0c7b245988d9 (target/arm/cpu: Update coding style to make checkpatch.pl happy)
28/31 Checking commit a26ed36615e1 (device_tree: Allow name wildcards in qemu_fdt_node_path())
29/31 Checking commit cb4770a86c1d (device_tree: Constify compat in qemu_fdt_node_path())
30/31 Checking commit 851a7747ead2 (hw/arm: xlnx-zcu102: Move arm_boot_info into XlnxZCU102)
31/31 Checking commit cc6c93a4b886 (hw/arm: xlnx-zcu102: Disable unsupported FDT firmware nodes)
=== OUTPUT END ===
Test command exited with code: 1
The full log is available at
http://patchew.org/logs/20200430115142.13430-1-peter.maydell@linaro.org/testing.checkpatch/?type=message.
---
Email generated automatically by Patchew [https://patchew.org/].
Please send your feedback to patchew-devel@redhat.com
^ permalink raw reply [flat|nested] 40+ messages in thread