From: Peter Maydell <peter.maydell@linaro.org>
To: qemu-devel@nongnu.org
Subject: [PULL 00/29] target-arm queue
Date: Fri, 5 Jun 2020 17:49:38 +0100 [thread overview]
Message-ID: <20200605165007.12095-1-peter.maydell@linaro.org> (raw)
Arm queue; some of the simpler stuff, things other have reviewed (thanks!), etc.
-- PMM
The following changes since commit 5d2f557b47dfbf8f23277a5bdd8473d4607c681a:
Merge remote-tracking branch 'remotes/kraxel/tags/vga-20200605-pull-request' into staging (2020-06-05 13:53:05 +0100)
are available in the Git repository at:
https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20200605
for you to fetch changes up to 2c35a39eda0b16c2ed85c94cec204bf5efb97812:
target/arm: Convert Neon one-register-and-immediate insns to decodetree (2020-06-05 17:23:10 +0100)
----------------------------------------------------------------
target-arm queue:
hw/ssi/imx_spi: Handle tx burst lengths other than 8 correctly
hw/input/pxa2xx_keypad: Replace hw_error() by qemu_log_mask()
hw/arm/pxa2xx: Replace printf() call by qemu_log_mask()
target/arm: Convert crypto insns to gvec
hw/adc/stm32f2xx_adc: Correct memory region size and access size
tests/acceptance: Add a boot test for the xlnx-versal-virt machine
docs/system: Document Aspeed boards
raspi: Add model of the USB controller
target/arm: Convert 2-reg-and-shift and 1-reg-imm Neon insns to decodetree
----------------------------------------------------------------
Cédric Le Goater (1):
docs/system: Document Aspeed boards
Eden Mikitas (2):
hw/ssi/imx_spi: changed while statement to prevent underflow
hw/ssi/imx_spi: Removed unnecessary cast of rx data received from slave
Paul Zimmerman (7):
raspi: add BCM2835 SOC MPHI emulation
dwc-hsotg (dwc2) USB host controller register definitions
dwc-hsotg (dwc2) USB host controller state definitions
dwc-hsotg (dwc2) USB host controller emulation
usb: add short-packet handling to usb-storage driver
wire in the dwc-hsotg (dwc2) USB host controller emulation
raspi2 acceptance test: add test for dwc-hsotg (dwc2) USB host
Peter Maydell (9):
target/arm: Convert Neon VSHL and VSLI 2-reg-shift insn to decodetree
target/arm: Convert Neon VSHR 2-reg-shift insns to decodetree
target/arm: Convert Neon VSRA, VSRI, VRSHR, VRSRA 2-reg-shift insns to decodetree
target/arm: Convert VQSHLU, VQSHL 2-reg-shift insns to decodetree
target/arm: Convert Neon narrowing shifts with op==8 to decodetree
target/arm: Convert Neon narrowing shifts with op==9 to decodetree
target/arm: Convert Neon VSHLL, VMOVL to decodetree
target/arm: Convert VCVT fixed-point ops to decodetree
target/arm: Convert Neon one-register-and-immediate insns to decodetree
Philippe Mathieu-Daudé (3):
hw/input/pxa2xx_keypad: Replace hw_error() by qemu_log_mask()
hw/arm/pxa2xx: Replace printf() call by qemu_log_mask()
hw/adc/stm32f2xx_adc: Correct memory region size and access size
Richard Henderson (6):
target/arm: Convert aes and sm4 to gvec helpers
target/arm: Convert rax1 to gvec helpers
target/arm: Convert sha512 and sm3 to gvec helpers
target/arm: Convert sha1 and sha256 to gvec helpers
target/arm: Split helper_crypto_sha1_3reg
target/arm: Split helper_crypto_sm3tt
Thomas Huth (1):
tests/acceptance: Add a boot test for the xlnx-versal-virt machine
docs/system/arm/aspeed.rst | 85 ++
docs/system/target-arm.rst | 1 +
hw/usb/hcd-dwc2.h | 190 +++++
include/hw/arm/bcm2835_peripherals.h | 5 +-
include/hw/misc/bcm2835_mphi.h | 44 +
include/hw/usb/dwc2-regs.h | 899 ++++++++++++++++++++
target/arm/helper.h | 45 +-
target/arm/translate-a64.h | 3 +
target/arm/vec_internal.h | 33 +
target/arm/neon-dp.decode | 214 ++++-
hw/adc/stm32f2xx_adc.c | 4 +-
hw/arm/bcm2835_peripherals.c | 38 +-
hw/arm/pxa2xx.c | 66 +-
hw/input/pxa2xx_keypad.c | 10 +-
hw/misc/bcm2835_mphi.c | 191 +++++
hw/ssi/imx_spi.c | 4 +-
hw/usb/dev-storage.c | 15 +-
hw/usb/hcd-dwc2.c | 1417 ++++++++++++++++++++++++++++++++
target/arm/crypto_helper.c | 267 ++++--
target/arm/translate-a64.c | 198 ++---
target/arm/translate-neon.inc.c | 796 ++++++++++++++----
target/arm/translate.c | 539 +-----------
target/arm/vec_helper.c | 12 +-
hw/misc/Makefile.objs | 1 +
hw/usb/Kconfig | 5 +
hw/usb/Makefile.objs | 1 +
hw/usb/trace-events | 50 ++
tests/acceptance/boot_linux_console.py | 35 +-
28 files changed, 4258 insertions(+), 910 deletions(-)
create mode 100644 docs/system/arm/aspeed.rst
create mode 100644 hw/usb/hcd-dwc2.h
create mode 100644 include/hw/misc/bcm2835_mphi.h
create mode 100644 include/hw/usb/dwc2-regs.h
create mode 100644 target/arm/vec_internal.h
create mode 100644 hw/misc/bcm2835_mphi.c
create mode 100644 hw/usb/hcd-dwc2.c
next reply other threads:[~2020-06-05 16:51 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-06-05 16:49 Peter Maydell [this message]
2020-06-05 16:49 ` [PULL 01/29] hw/ssi/imx_spi: changed while statement to prevent underflow Peter Maydell
2020-06-05 16:49 ` [PULL 02/29] hw/ssi/imx_spi: Removed unnecessary cast of rx data received from slave Peter Maydell
2020-06-05 16:49 ` [PULL 03/29] hw/input/pxa2xx_keypad: Replace hw_error() by qemu_log_mask() Peter Maydell
2020-06-05 16:49 ` [PULL 04/29] hw/arm/pxa2xx: Replace printf() call " Peter Maydell
2020-06-05 16:49 ` [PULL 05/29] target/arm: Convert aes and sm4 to gvec helpers Peter Maydell
2020-06-05 16:49 ` [PULL 06/29] target/arm: Convert rax1 " Peter Maydell
2020-06-05 16:49 ` [PULL 07/29] target/arm: Convert sha512 and sm3 " Peter Maydell
2020-06-05 16:49 ` [PULL 08/29] target/arm: Convert sha1 and sha256 " Peter Maydell
2020-06-05 16:49 ` [PULL 09/29] target/arm: Split helper_crypto_sha1_3reg Peter Maydell
2020-06-05 16:49 ` [PULL 10/29] target/arm: Split helper_crypto_sm3tt Peter Maydell
2020-06-05 16:49 ` [PULL 11/29] hw/adc/stm32f2xx_adc: Correct memory region size and access size Peter Maydell
2020-06-05 16:49 ` [PULL 12/29] tests/acceptance: Add a boot test for the xlnx-versal-virt machine Peter Maydell
2020-06-05 16:49 ` [PULL 13/29] docs/system: Document Aspeed boards Peter Maydell
2020-06-05 16:49 ` [PULL 14/29] raspi: add BCM2835 SOC MPHI emulation Peter Maydell
2020-06-05 16:49 ` [PULL 15/29] dwc-hsotg (dwc2) USB host controller register definitions Peter Maydell
2020-07-04 9:17 ` Philippe Mathieu-Daudé
2020-07-04 10:35 ` Philippe Mathieu-Daudé
2020-06-05 16:49 ` [PULL 16/29] dwc-hsotg (dwc2) USB host controller state definitions Peter Maydell
2020-06-05 16:49 ` [PULL 17/29] dwc-hsotg (dwc2) USB host controller emulation Peter Maydell
2020-06-05 16:49 ` [PULL 18/29] usb: add short-packet handling to usb-storage driver Peter Maydell
2020-06-05 16:49 ` [PULL 19/29] wire in the dwc-hsotg (dwc2) USB host controller emulation Peter Maydell
2020-06-05 16:49 ` [PULL 20/29] raspi2 acceptance test: add test for dwc-hsotg (dwc2) USB host Peter Maydell
2020-06-05 16:49 ` [PULL 21/29] target/arm: Convert Neon VSHL and VSLI 2-reg-shift insn to decodetree Peter Maydell
2020-06-05 16:50 ` [PULL 22/29] target/arm: Convert Neon VSHR 2-reg-shift insns " Peter Maydell
2020-06-05 16:50 ` [PULL 23/29] target/arm: Convert Neon VSRA, VSRI, VRSHR, VRSRA " Peter Maydell
2020-06-05 16:50 ` [PULL 24/29] target/arm: Convert VQSHLU, VQSHL " Peter Maydell
2020-06-05 16:50 ` [PULL 25/29] target/arm: Convert Neon narrowing shifts with op==8 " Peter Maydell
2020-06-05 16:50 ` [PULL 26/29] target/arm: Convert Neon narrowing shifts with op==9 " Peter Maydell
2020-06-05 16:50 ` [PULL 27/29] target/arm: Convert Neon VSHLL, VMOVL " Peter Maydell
2020-06-05 16:50 ` [PULL 28/29] target/arm: Convert VCVT fixed-point ops " Peter Maydell
2020-06-05 16:50 ` [PULL 29/29] target/arm: Convert Neon one-register-and-immediate insns " Peter Maydell
2020-06-05 20:10 ` [PULL 00/29] target-arm queue no-reply
2020-06-08 10:04 ` Peter Maydell
-- strict thread matches above, loose matches on Subject: below --
2023-05-18 12:50 Peter Maydell
2023-05-18 14:51 ` Richard Henderson
2022-12-15 12:49 Peter Maydell
2020-05-21 19:15 Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200605165007.12095-1-peter.maydell@linaro.org \
--to=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).