From: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
To: Steve Sistare <steven.sistare@oracle.com>
Cc: "Daniel P. Berrange" <berrange@redhat.com>,
"Michael S. Tsirkin" <mst@redhat.com>,
"Alex Bennée" <alex.bennee@linaro.org>,
"Juan Quintela" <quintela@redhat.com>,
qemu-devel@nongnu.org, "Markus Armbruster" <armbru@redhat.com>,
"Alex Williamson" <alex.williamson@redhat.com>,
"Stefan Hajnoczi" <stefanha@redhat.com>,
"Marc-André Lureau" <marcandre.lureau@redhat.com>,
"Paolo Bonzini" <pbonzini@redhat.com>,
"Philippe Mathieu-Daudé" <philmd@redhat.com>
Subject: Re: [PATCH V1 32/32] vfio-pci: improved tracing
Date: Tue, 15 Sep 2020 19:49:25 +0100 [thread overview]
Message-ID: <20200915184925.GE2922@work-vm> (raw)
In-Reply-To: <1596122076-341293-33-git-send-email-steven.sistare@oracle.com>
* Steve Sistare (steven.sistare@oracle.com) wrote:
> Print more info for existing trace points:
> trace_kvm_irqchip_add_msi_route.
> trace_pci_update_mappings_del
> trace_pci_update_mappings_add
>
> Add new trace points:
> trace_kvm_irqchip_assign_irqfd
> trace_msix_table_mmio_write
> trace_vfio_dma_unmap
> trace_vfio_dma_map
> trace_vfio_region
> trace_vfio_descriptors
> trace_ram_block_add
>
> Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Why don't you split this out into a separate patch by itself; if they're
general extra useful tracing they can just go in.
Note that you've also added a new warning in vfio_dma_unmap
Dave
> ---
> accel/kvm/kvm-all.c | 8 ++++++--
> accel/kvm/trace-events | 3 ++-
> exec.c | 3 +++
> hw/pci/msix.c | 1 +
> hw/pci/pci.c | 10 ++++++----
> hw/pci/trace-events | 5 +++--
> hw/vfio/common.c | 16 +++++++++++++++-
> hw/vfio/pci.c | 1 +
> hw/vfio/trace-events | 9 ++++++---
> trace-events | 2 ++
> 10 files changed, 45 insertions(+), 13 deletions(-)
>
> diff --git a/accel/kvm/kvm-all.c b/accel/kvm/kvm-all.c
> index 63ef6af..5511ea7 100644
> --- a/accel/kvm/kvm-all.c
> +++ b/accel/kvm/kvm-all.c
> @@ -46,6 +46,7 @@
> #include "sysemu/reset.h"
>
> #include "hw/boards.h"
> +#include "trace-root.h"
>
> /* This check must be after config-host.h is included */
> #ifdef CONFIG_EVENTFD
> @@ -1670,7 +1671,7 @@ int kvm_irqchip_add_msi_route(KVMState *s, int vector, PCIDevice *dev)
> }
>
> trace_kvm_irqchip_add_msi_route(dev ? dev->name : (char *)"N/A",
> - vector, virq);
> + vector, virq, msg.address, msg.data);
>
> kvm_add_routing_entry(s, &kroute);
> kvm_arch_add_msi_route_post(&kroute, vector, dev);
> @@ -1717,6 +1718,7 @@ static int kvm_irqchip_assign_irqfd(KVMState *s, EventNotifier *event,
> {
> int fd = event_notifier_get_fd(event);
> int rfd = resample ? event_notifier_get_fd(resample) : -1;
> + int ret;
>
> struct kvm_irqfd irqfd = {
> .fd = fd,
> @@ -1758,7 +1760,9 @@ static int kvm_irqchip_assign_irqfd(KVMState *s, EventNotifier *event,
> return -ENOSYS;
> }
>
> - return kvm_vm_ioctl(s, KVM_IRQFD, &irqfd);
> + ret = kvm_vm_ioctl(s, KVM_IRQFD, &irqfd);
> + trace_kvm_irqchip_assign_irqfd(fd, virq, rfd, ret);
> + return ret;
> }
>
> int kvm_irqchip_add_adapter_route(KVMState *s, AdapterInfo *adapter)
> diff --git a/accel/kvm/trace-events b/accel/kvm/trace-events
> index a68eb66..67a01e6 100644
> --- a/accel/kvm/trace-events
> +++ b/accel/kvm/trace-events
> @@ -9,7 +9,8 @@ kvm_device_ioctl(int fd, int type, void *arg) "dev fd %d, type 0x%x, arg %p"
> kvm_failed_reg_get(uint64_t id, const char *msg) "Warning: Unable to retrieve ONEREG %" PRIu64 " from KVM: %s"
> kvm_failed_reg_set(uint64_t id, const char *msg) "Warning: Unable to set ONEREG %" PRIu64 " to KVM: %s"
> kvm_irqchip_commit_routes(void) ""
> -kvm_irqchip_add_msi_route(char *name, int vector, int virq) "dev %s vector %d virq %d"
> +kvm_irqchip_add_msi_route(char *name, int vector, int virq, uint64_t addr, uint32_t data) "%s, vector %d, virq %d, msg {addr 0x%"PRIx64", data 0x%x}"
> +kvm_irqchip_assign_irqfd(int fd, int virq, int rfd, int status) "(fd=%d, virq=%d, rfd=%d) KVM_IRQFD returns %d"
> kvm_irqchip_update_msi_route(int virq) "Updating MSI route virq=%d"
> kvm_irqchip_release_virq(int virq) "virq %d"
> kvm_set_ioeventfd_mmio(int fd, uint64_t addr, uint32_t val, bool assign, uint32_t size, bool datamatch) "fd: %d @0x%" PRIx64 " val=0x%x assign: %d size: %d match: %d"
> diff --git a/exec.c b/exec.c
> index 5473c09..dd99ee0 100644
> --- a/exec.c
> +++ b/exec.c
> @@ -2319,6 +2319,9 @@ static void ram_block_add(RAMBlock *new_block, Error **errp, bool shared)
> }
> ram_block_notify_add(new_block->host, new_block->max_length);
> }
> + trace_ram_block_add(new_block->host, new_block->max_length,
> + memory_region_name(new_block->mr),
> + new_block->mr->readonly ? "ro" : "rw");
> }
>
> #ifdef CONFIG_POSIX
> diff --git a/hw/pci/msix.c b/hw/pci/msix.c
> index 67e34f3..65a2882 100644
> --- a/hw/pci/msix.c
> +++ b/hw/pci/msix.c
> @@ -189,6 +189,7 @@ static void msix_table_mmio_write(void *opaque, hwaddr addr,
> int vector = addr / PCI_MSIX_ENTRY_SIZE;
> bool was_masked;
>
> + trace_msix_table_mmio_write(dev->name, addr, val, size);
> was_masked = msix_is_masked(dev, vector);
> pci_set_long(dev->msix_table + addr, val);
> msix_handle_mask_update(dev, vector, was_masked);
> diff --git a/hw/pci/pci.c b/hw/pci/pci.c
> index c2e1509..6142411 100644
> --- a/hw/pci/pci.c
> +++ b/hw/pci/pci.c
> @@ -1324,9 +1324,11 @@ void pci_update_mappings(PCIDevice *d)
> PCIIORegion *r;
> int i;
> pcibus_t new_addr;
> + const char *name;
>
> for(i = 0; i < PCI_NUM_REGIONS; i++) {
> r = &d->io_regions[i];
> + name = r->memory ? r->memory->name : "";
>
> /* this region isn't registered */
> if (!r->size)
> @@ -1340,18 +1342,18 @@ void pci_update_mappings(PCIDevice *d)
>
> /* now do the real mapping */
> if (r->addr != PCI_BAR_UNMAPPED) {
> - trace_pci_update_mappings_del(d, pci_dev_bus_num(d),
> + trace_pci_update_mappings_del(d->name, pci_dev_bus_num(d),
> PCI_SLOT(d->devfn),
> PCI_FUNC(d->devfn),
> - i, r->addr, r->size);
> + i, r->addr, r->size, name);
> memory_region_del_subregion(r->address_space, r->memory);
> }
> r->addr = new_addr;
> if (r->addr != PCI_BAR_UNMAPPED) {
> - trace_pci_update_mappings_add(d, pci_dev_bus_num(d),
> + trace_pci_update_mappings_add(d->name, pci_dev_bus_num(d),
> PCI_SLOT(d->devfn),
> PCI_FUNC(d->devfn),
> - i, r->addr, r->size);
> + i, r->addr, r->size, name);
> memory_region_add_subregion_overlap(r->address_space,
> r->addr, r->memory, 1);
> }
> diff --git a/hw/pci/trace-events b/hw/pci/trace-events
> index def4b39..6dd7015 100644
> --- a/hw/pci/trace-events
> +++ b/hw/pci/trace-events
> @@ -1,8 +1,8 @@
> # See docs/devel/tracing.txt for syntax documentation.
>
> # pci.c
> -pci_update_mappings_del(void *d, uint32_t bus, uint32_t slot, uint32_t func, int bar, uint64_t addr, uint64_t size) "d=%p %02x:%02x.%x %d,0x%"PRIx64"+0x%"PRIx64
> -pci_update_mappings_add(void *d, uint32_t bus, uint32_t slot, uint32_t func, int bar, uint64_t addr, uint64_t size) "d=%p %02x:%02x.%x %d,0x%"PRIx64"+0x%"PRIx64
> +pci_update_mappings_del(const char *dname, uint32_t bus, uint32_t slot, uint32_t func, int bar, uint64_t addr, uint64_t size, const char *name) "%s %02x:%02x.%x [%d] 0x%"PRIx64", 0x%"PRIx64"B \"%s\""
> +pci_update_mappings_add(const char *dname, uint32_t bus, uint32_t slot, uint32_t func, int bar, uint64_t addr, uint64_t size, const char *name) "%s %02x:%02x.%x [%d] 0x%"PRIx64", 0x%"PRIx64"B \"%s\""
>
> # pci_host.c
> pci_cfg_read(const char *dev, unsigned devid, unsigned fnid, unsigned offs, unsigned val) "%s %02u:%u @0x%x -> 0x%x"
> @@ -10,3 +10,4 @@ pci_cfg_write(const char *dev, unsigned devid, unsigned fnid, unsigned offs, uns
>
> # msix.c
> msix_write_config(char *name, bool enabled, bool masked) "dev %s enabled %d masked %d"
> +msix_table_mmio_write(char *name, uint64_t addr, uint64_t val, unsigned size) "(%s, @%"PRId64", 0x%"PRIx64", %dB)"
> diff --git a/hw/vfio/common.c b/hw/vfio/common.c
> index a51a093..23c8bf3 100644
> --- a/hw/vfio/common.c
> +++ b/hw/vfio/common.c
> @@ -304,6 +304,8 @@ static int vfio_dma_unmap(VFIOContainer *container,
> return 0;
> }
>
> + trace_vfio_dma_unmap(container->fd, iova, size);
> +
> while (ioctl(container->fd, VFIO_IOMMU_UNMAP_DMA, &unmap)) {
> /*
> * The type1 backend has an off-by-one bug in the kernel (71a7d3d78e3c
> @@ -327,6 +329,11 @@ static int vfio_dma_unmap(VFIOContainer *container,
> return -errno;
> }
>
> + if (unmap.size != size) {
> + error_printf("warn: VFIO_UNMAP_DMA(0x%lx, 0x%lx) only unmaps 0x%llx",
> + iova, size, unmap.size);
> + }
> +
> return 0;
> }
>
> @@ -345,6 +352,9 @@ static int vfio_dma_map(VFIOContainer *container, hwaddr iova,
> return 0;
> }
>
> + trace_vfio_dma_map(container->fd, iova, size, vaddr,
> + (readonly ? "r" : "rw"));
> +
> if (!readonly) {
> map.flags |= VFIO_DMA_MAP_FLAG_WRITE;
> }
> @@ -985,7 +995,8 @@ int vfio_region_mmap(VFIORegion *region)
> trace_vfio_region_mmap(memory_region_name(®ion->mmaps[i].mem),
> region->mmaps[i].offset,
> region->mmaps[i].offset +
> - region->mmaps[i].size - 1);
> + region->mmaps[i].size - 1,
> + region->mmaps[i].mmap);
> }
>
> return 0;
> @@ -1696,6 +1707,9 @@ retry:
> goto retry;
> }
>
> + trace_vfio_region(vbasedev->name, index, (*info)->offset, (*info)->size,
> + (*info)->cap_offset, (*info)->flags);
> +
> return 0;
> }
>
> diff --git a/hw/vfio/pci.c b/hw/vfio/pci.c
> index f72e277..d74e078 100644
> --- a/hw/vfio/pci.c
> +++ b/hw/vfio/pci.c
> @@ -41,6 +41,7 @@
> #include "trace.h"
> #include "qapi/error.h"
> #include "migration/blocker.h"
> +#include "trace-root.h"
>
> #define TYPE_VFIO_PCI "vfio-pci"
> #define PCI_VFIO(obj) OBJECT_CHECK(VFIOPCIDevice, obj, TYPE_VFIO_PCI)
> diff --git a/hw/vfio/trace-events b/hw/vfio/trace-events
> index 10d899c..83cd0a6 100644
> --- a/hw/vfio/trace-events
> +++ b/hw/vfio/trace-events
> @@ -25,7 +25,7 @@ vfio_pci_size_rom(const char *name, int size) "%s ROM size 0x%x"
> vfio_vga_write(uint64_t addr, uint64_t data, int size) " (0x%"PRIx64", 0x%"PRIx64", %d)"
> vfio_vga_read(uint64_t addr, int size, uint64_t data) " (0x%"PRIx64", %d) = 0x%"PRIx64
> vfio_pci_read_config(const char *name, int addr, int len, int val) " (%s, @0x%x, len=0x%x) 0x%x"
> -vfio_pci_write_config(const char *name, int addr, int val, int len) " (%s, @0x%x, 0x%x, len=0x%x)"
> +vfio_pci_write_config(const char *name, int addr, int val, int len) "(%s, @0x%x, 0x%x, 0x%xB)"
> vfio_msi_setup(const char *name, int pos) "%s PCI MSI CAP @0x%x"
> vfio_msix_early_setup(const char *name, int pos, int table_bar, int offset, int entries) "%s PCI MSI-X CAP @0x%x, BAR %d, offset 0x%x, entries %d"
> vfio_check_pcie_flr(const char *name) "%s Supports FLR via PCIe cap"
> @@ -37,7 +37,7 @@ vfio_pci_hot_reset_dep_devices(int domain, int bus, int slot, int function, int
> vfio_pci_hot_reset_result(const char *name, const char *result) "%s hot reset: %s"
> vfio_populate_device_config(const char *name, unsigned long size, unsigned long offset, unsigned long flags) "Device %s config:\n size: 0x%lx, offset: 0x%lx, flags: 0x%lx"
> vfio_populate_device_get_irq_info_failure(const char *errstr) "VFIO_DEVICE_GET_IRQ_INFO failure: %s"
> -vfio_realize(const char *name, int group_id) " (%s) group %d"
> +vfio_realize(const char *name, int group_id) "(%s) group %d"
> vfio_mdev(const char *name, bool is_mdev) " (%s) is_mdev %d"
> vfio_add_ext_cap_dropped(const char *name, uint16_t cap, uint16_t offset) "%s 0x%x@0x%x"
> vfio_pci_reset(const char *name) " (%s)"
> @@ -109,7 +109,7 @@ vfio_get_device(const char * name, unsigned int flags, unsigned int num_regions,
> vfio_put_base_device(int fd) "close vdev->fd=%d"
> vfio_region_setup(const char *dev, int index, const char *name, unsigned long flags, unsigned long offset, unsigned long size) "Device %s, region %d \"%s\", flags: 0x%lx, offset: 0x%lx, size: 0x%lx"
> vfio_region_mmap_fault(const char *name, int index, unsigned long offset, unsigned long size, int fault) "Region %s mmaps[%d], [0x%lx - 0x%lx], fault: %d"
> -vfio_region_mmap(const char *name, unsigned long offset, unsigned long end) "Region %s [0x%lx - 0x%lx]"
> +vfio_region_mmap(const char *name, unsigned long offset, unsigned long end, void *addr) "%s [0x%lx - 0x%lx] maps to %p"
> vfio_region_exit(const char *name, int index) "Device %s, region %d"
> vfio_region_finalize(const char *name, int index) "Device %s, region %d"
> vfio_region_mmaps_set_enabled(const char *name, bool enabled) "Region %s mmaps enabled: %d"
> @@ -117,6 +117,9 @@ vfio_region_sparse_mmap_header(const char *name, int index, int nr_areas) "Devic
> vfio_region_sparse_mmap_entry(int i, unsigned long start, unsigned long end) "sparse entry %d [0x%lx - 0x%lx]"
> vfio_get_dev_region(const char *name, int index, uint32_t type, uint32_t subtype) "%s index %d, %08x/%0x8"
> vfio_dma_unmap_overflow_workaround(void) ""
> +vfio_dma_unmap(int fd, uint64_t iova, uint64_t size) "fd %d, iova 0x%"PRIx64", len 0x%"PRIx64
> +vfio_dma_map(int fd, uint64_t iova, uint64_t size, void *addr, const char *access) "fd %d, iova 0x%"PRIx64", len 0x%"PRIx64", va %p, %s"
> +vfio_region(const char *name, int index, uint64_t offset, uint64_t size, int cap_offset, int flags) "%s [%d]: +0x%"PRIx64", 0x%"PRIx64"B, cap +0x%x, flags 0x%x"
>
> # platform.c
> vfio_platform_base_device_init(char *name, int groupid) "%s belongs to group #%d"
> diff --git a/trace-events b/trace-events
> index 42107eb..98589a4 100644
> --- a/trace-events
> +++ b/trace-events
> @@ -107,6 +107,8 @@ qmp_job_complete(void *job) "job %p"
> qmp_job_finalize(void *job) "job %p"
> qmp_job_dismiss(void *job) "job %p"
>
> +# exec.c
> +ram_block_add(void *host, uint64_t maxlen, const char *name, const char *mode) "host=%p, maxlen=0x%"PRIx64", mr = {name=%s, %s}"
>
> ### Guest events, keep at bottom
>
> --
> 1.8.3.1
>
--
Dr. David Alan Gilbert / dgilbert@redhat.com / Manchester, UK
next prev parent reply other threads:[~2020-09-15 18:50 UTC|newest]
Thread overview: 118+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-30 15:14 [PATCH V1 00/32] Live Update Steve Sistare
2020-07-30 15:14 ` [PATCH V1 01/32] savevm: add vmstate handler iterators Steve Sistare
2020-09-11 16:24 ` Dr. David Alan Gilbert
2020-09-24 21:43 ` Steven Sistare
2020-09-25 9:07 ` Dr. David Alan Gilbert
2020-07-30 15:14 ` [PATCH V1 02/32] savevm: VM handlers mode mask Steve Sistare
2020-07-30 15:14 ` [PATCH V1 03/32] savevm: QMP command for cprsave Steve Sistare
2020-07-30 16:12 ` Eric Blake
2020-07-30 17:52 ` Steven Sistare
2020-09-11 16:43 ` Dr. David Alan Gilbert
2020-09-25 18:43 ` Steven Sistare
2020-09-25 22:22 ` Steven Sistare
2020-07-30 15:14 ` [PATCH V1 04/32] savevm: HMP Command " Steve Sistare
2020-09-11 16:57 ` Dr. David Alan Gilbert
2020-09-24 21:44 ` Steven Sistare
2020-09-25 9:26 ` Dr. David Alan Gilbert
2020-07-30 15:14 ` [PATCH V1 05/32] savevm: QMP command for cprload Steve Sistare
2020-07-30 16:14 ` Eric Blake
2020-07-30 18:00 ` Steven Sistare
2020-09-11 17:18 ` Dr. David Alan Gilbert
2020-09-24 21:49 ` Steven Sistare
2020-07-30 15:14 ` [PATCH V1 06/32] savevm: HMP Command " Steve Sistare
2020-07-30 15:14 ` [PATCH V1 07/32] savevm: QMP command for cprinfo Steve Sistare
2020-07-30 16:17 ` Eric Blake
2020-07-30 18:02 ` Steven Sistare
2020-07-30 15:14 ` [PATCH V1 08/32] savevm: HMP " Steve Sistare
2020-09-11 17:27 ` Dr. David Alan Gilbert
2020-09-24 21:50 ` Steven Sistare
2020-07-30 15:14 ` [PATCH V1 09/32] savevm: prevent cprsave if memory is volatile Steve Sistare
2020-09-11 17:35 ` Dr. David Alan Gilbert
2020-09-24 21:51 ` Steven Sistare
2020-07-30 15:14 ` [PATCH V1 10/32] kvmclock: restore paused KVM clock Steve Sistare
2020-09-11 17:50 ` Dr. David Alan Gilbert
2020-09-25 18:07 ` Steven Sistare
2020-07-30 15:14 ` [PATCH V1 11/32] cpu: disable ticks when suspended Steve Sistare
2020-09-11 17:53 ` Dr. David Alan Gilbert
2020-09-24 20:42 ` Steven Sistare
2020-09-25 9:03 ` Dr. David Alan Gilbert
2020-07-30 15:14 ` [PATCH V1 12/32] vl: pause option Steve Sistare
2020-07-30 16:20 ` Eric Blake
2020-07-30 18:11 ` Steven Sistare
2020-07-31 10:07 ` Daniel P. Berrangé
2020-07-31 15:18 ` Steven Sistare
2020-07-30 17:03 ` Alex Bennée
2020-07-30 18:14 ` Steven Sistare
2020-07-31 9:44 ` Alex Bennée
2020-09-11 17:59 ` Dr. David Alan Gilbert
2020-09-24 21:51 ` Steven Sistare
2020-07-30 15:14 ` [PATCH V1 13/32] gdbstub: gdb support for suspended state Steve Sistare
2020-09-11 18:41 ` Dr. David Alan Gilbert
2020-09-24 21:51 ` Steven Sistare
2020-07-30 15:14 ` [PATCH V1 14/32] savevm: VMS_RESTART and cprsave restart Steve Sistare
2020-07-30 16:22 ` Eric Blake
2020-07-30 18:14 ` Steven Sistare
2020-09-11 18:44 ` Dr. David Alan Gilbert
2020-09-24 21:44 ` Steven Sistare
2020-07-30 15:14 ` [PATCH V1 15/32] vl: QEMU_START_FREEZE env var Steve Sistare
2020-09-11 18:49 ` Dr. David Alan Gilbert
2020-09-24 21:47 ` Steven Sistare
2020-09-25 15:52 ` Dr. David Alan Gilbert
2020-07-30 15:14 ` [PATCH V1 16/32] oslib: add qemu_clr_cloexec Steve Sistare
2020-09-11 18:52 ` Dr. David Alan Gilbert
2020-07-30 15:14 ` [PATCH V1 17/32] util: env var helpers Steve Sistare
2020-09-11 19:00 ` Dr. David Alan Gilbert
2020-09-24 21:52 ` Steven Sistare
2020-07-30 15:14 ` [PATCH V1 18/32] osdep: import MADV_DOEXEC Steve Sistare
2020-08-17 18:30 ` Steven Sistare
2020-08-17 20:48 ` Alex Williamson
2020-08-17 21:20 ` Steven Sistare
2020-08-17 21:44 ` Alex Williamson
2020-08-18 2:42 ` Alex Williamson
2020-08-19 21:52 ` Steven Sistare
2020-08-24 22:30 ` Alex Williamson
2020-10-08 16:32 ` Steven Sistare
2020-10-15 20:36 ` Alex Williamson
2020-10-19 16:33 ` Steven Sistare
2020-10-26 18:28 ` Steven Sistare
2020-07-30 15:14 ` [PATCH V1 19/32] memory: ram_block_add cosmetic changes Steve Sistare
2020-07-30 15:14 ` [PATCH V1 20/32] vl: add helper to request re-exec Steve Sistare
2020-07-30 15:14 ` [PATCH V1 21/32] exec, memory: exec(3) to restart Steve Sistare
2020-07-30 15:14 ` [PATCH V1 22/32] char: qio_channel_socket_accept reuse fd Steve Sistare
2020-09-15 17:33 ` Dr. David Alan Gilbert
2020-09-15 17:53 ` Daniel P. Berrangé
2020-09-24 21:54 ` Steven Sistare
2020-07-30 15:14 ` [PATCH V1 23/32] char: save/restore chardev socket fds Steve Sistare
2020-07-30 15:14 ` [PATCH V1 24/32] ui: save/restore vnc " Steve Sistare
2020-07-31 9:06 ` Daniel P. Berrangé
2020-07-31 16:51 ` Steven Sistare
2020-07-30 15:14 ` [PATCH V1 25/32] char: save/restore chardev pty fds Steve Sistare
2020-07-30 15:14 ` [PATCH V1 26/32] monitor: save/restore QMP negotiation status Steve Sistare
2020-07-30 15:14 ` [PATCH V1 27/32] vhost: reset vhost devices upon cprsave Steve Sistare
2020-07-30 15:14 ` [PATCH V1 28/32] char: restore terminal on restart Steve Sistare
2020-07-30 15:14 ` [PATCH V1 29/32] pci: export pci_update_mappings Steve Sistare
2020-07-30 15:14 ` [PATCH V1 30/32] vfio-pci: save and restore Steve Sistare
2020-08-06 10:22 ` Jason Zeng
2020-08-07 20:38 ` Steven Sistare
2020-08-10 3:50 ` Jason Zeng
2020-08-19 21:15 ` Steven Sistare
2020-08-20 10:33 ` Jason Zeng
2020-10-07 21:25 ` Steven Sistare
2020-07-30 15:14 ` [PATCH V1 31/32] vfio-pci: trace pci config Steve Sistare
2020-07-30 15:14 ` [PATCH V1 32/32] vfio-pci: improved tracing Steve Sistare
2020-09-15 18:49 ` Dr. David Alan Gilbert [this message]
2020-09-24 21:52 ` Steven Sistare
2020-07-30 16:52 ` [PATCH V1 00/32] Live Update Daniel P. Berrangé
2020-07-30 18:48 ` Steven Sistare
2020-07-31 8:53 ` Daniel P. Berrangé
2020-07-31 15:27 ` Steven Sistare
2020-07-31 15:52 ` Daniel P. Berrangé
2020-07-31 17:20 ` Steven Sistare
2020-08-11 19:08 ` Dr. David Alan Gilbert
2020-07-30 17:15 ` Paolo Bonzini
2020-07-30 19:09 ` Steven Sistare
2020-07-30 21:39 ` Paolo Bonzini
2020-07-31 19:22 ` Steven Sistare
2020-07-30 17:49 ` Dr. David Alan Gilbert
2020-07-30 19:31 ` Steven Sistare
2020-08-04 18:18 ` Steven Sistare
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200915184925.GE2922@work-vm \
--to=dgilbert@redhat.com \
--cc=alex.bennee@linaro.org \
--cc=alex.williamson@redhat.com \
--cc=armbru@redhat.com \
--cc=berrange@redhat.com \
--cc=marcandre.lureau@redhat.com \
--cc=mst@redhat.com \
--cc=pbonzini@redhat.com \
--cc=philmd@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=quintela@redhat.com \
--cc=stefanha@redhat.com \
--cc=steven.sistare@oracle.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).