qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Richard Henderson <richard.henderson@linaro.org>
To: qemu-devel@nongnu.org
Cc: Paolo Bonzini <pbonzini@redhat.com>, alex.bennee@linaro.org
Subject: [PATCH v4 01/11] capstone: Convert Makefile bits to meson bits
Date: Mon, 21 Sep 2020 10:41:08 -0700	[thread overview]
Message-ID: <20200921174118.39352-2-richard.henderson@linaro.org> (raw)
In-Reply-To: <20200921174118.39352-1-richard.henderson@linaro.org>

There are better ways to do this, e.g. meson cmake subproject,
but that requires cmake 3.7 and some of our CI environments
only provide cmake 3.5.

Nor can we add a meson.build file to capstone/, because the git
submodule would then always report "untracked files".  Fixing that
would require creating our own branch on the qemu git mirror, at
which point we could just as easily create a native meson subproject.

Instead, build the library via the main meson.build.

This improves the current state of affairs in that we will re-link
the qemu executables against a changed libcapstone.a, which we wouldn't
do before-hand.  In addition, the use of the configuration header file
instead of command-line -DEFINES means that we will rebuild the
capstone objects with changes to meson.build.

Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
 configure         |  64 +++-----------------------
 Makefile          |  16 -------
 meson.build       | 111 +++++++++++++++++++++++++++++++++++++++++++---
 meson_options.txt |   4 ++
 4 files changed, 115 insertions(+), 80 deletions(-)

diff --git a/configure b/configure
index 7564479008..03915267e2 100755
--- a/configure
+++ b/configure
@@ -478,7 +478,7 @@ opengl=""
 opengl_dmabuf="no"
 cpuid_h="no"
 avx2_opt=""
-capstone=""
+capstone="auto"
 lzo=""
 snappy=""
 bzip2=""
@@ -1580,7 +1580,7 @@ for opt do
   ;;
   --enable-capstone) capstone="yes"
   ;;
-  --enable-capstone=git) capstone="git"
+  --enable-capstone=git) capstone="internal"
   ;;
   --enable-capstone=system) capstone="system"
   ;;
@@ -5128,51 +5128,11 @@ fi
 # capstone
 
 case "$capstone" in
-  "" | yes)
-    if $pkg_config capstone; then
-      capstone=system
-    elif test -e "${source_path}/.git" && test $git_update = 'yes' ; then
-      capstone=git
-    elif test -e "${source_path}/capstone/Makefile" ; then
-      capstone=internal
-    elif test -z "$capstone" ; then
-      capstone=no
-    else
-      feature_not_found "capstone" "Install capstone devel or git submodule"
-    fi
-    ;;
-
-  system)
-    if ! $pkg_config capstone; then
-      feature_not_found "capstone" "Install capstone devel"
-    fi
-    ;;
-esac
-
-case "$capstone" in
-  git | internal)
-    if test "$capstone" = git; then
+  auto | yes | internal)
+    # Simpler to always update submodule, even if not needed.
+    if test -e "${source_path}/.git" && test $git_update = 'yes' ; then
       git_submodules="${git_submodules} capstone"
     fi
-    mkdir -p capstone
-    if test "$mingw32" = "yes"; then
-      LIBCAPSTONE=capstone.lib
-    else
-      LIBCAPSTONE=libcapstone.a
-    fi
-    capstone_libs="-Lcapstone -lcapstone"
-    capstone_cflags="-I${source_path}/capstone/include"
-    ;;
-
-  system)
-    capstone_libs="$($pkg_config --libs capstone)"
-    capstone_cflags="$($pkg_config --cflags capstone)"
-    ;;
-
-  no)
-    ;;
-  *)
-    error_exit "Unknown state for capstone: $capstone"
     ;;
 esac
 
@@ -7292,11 +7252,6 @@ fi
 if test "$ivshmem" = "yes" ; then
   echo "CONFIG_IVSHMEM=y" >> $config_host_mak
 fi
-if test "$capstone" != "no" ; then
-  echo "CONFIG_CAPSTONE=y" >> $config_host_mak
-  echo "CAPSTONE_CFLAGS=$capstone_cflags" >> $config_host_mak
-  echo "CAPSTONE_LIBS=$capstone_libs" >> $config_host_mak
-fi
 if test "$debug_mutex" = "yes" ; then
   echo "CONFIG_DEBUG_MUTEX=y" >> $config_host_mak
 fi
@@ -7819,13 +7774,7 @@ done # for target in $targets
 if [ "$fdt" = "git" ]; then
   subdirs="$subdirs dtc"
 fi
-if [ "$capstone" = "git" -o "$capstone" = "internal" ]; then
-  subdirs="$subdirs capstone"
-fi
 echo "SUBDIRS=$subdirs" >> $config_host_mak
-if test -n "$LIBCAPSTONE"; then
-  echo "LIBCAPSTONE=$LIBCAPSTONE" >> $config_host_mak
-fi
 
 if test "$numa" = "yes"; then
   echo "CONFIG_NUMA=y" >> $config_host_mak
@@ -8008,7 +7957,8 @@ NINJA=${ninja:-$PWD/ninjatool} $meson setup \
         -Db_coverage=$(if test "$gcov" = yes; then echo true; else echo false; fi) \
 	-Dsdl=$sdl -Dsdl_image=$sdl_image \
 	-Dvnc=$vnc -Dvnc_sasl=$vnc_sasl -Dvnc_jpeg=$vnc_jpeg -Dvnc_png=$vnc_png \
-	-Dgettext=$gettext -Dxkbcommon=$xkbcommon -Du2f=$u2f\
+	-Dgettext=$gettext -Dxkbcommon=$xkbcommon -Du2f=$u2f \
+	-Dcapstone=$capstone \
         $cross_arg \
         "$PWD" "$source_path"
 
diff --git a/Makefile b/Makefile
index 7c60b9dcb8..f3da1760ad 100644
--- a/Makefile
+++ b/Makefile
@@ -156,22 +156,6 @@ dtc/all: .git-submodule-status dtc/libfdt
 dtc/%: .git-submodule-status
 	@mkdir -p $@
 
-# Overriding CFLAGS causes us to lose defines added in the sub-makefile.
-# Not overriding CFLAGS leads to mis-matches between compilation modes.
-# Therefore we replicate some of the logic in the sub-makefile.
-# Remove all the extra -Warning flags that QEMU uses that Capstone doesn't;
-# no need to annoy QEMU developers with such things.
-CAP_CFLAGS = $(patsubst -W%,,$(CFLAGS) $(QEMU_CFLAGS)) $(CAPSTONE_CFLAGS)
-CAP_CFLAGS += -DCAPSTONE_USE_SYS_DYN_MEM
-CAP_CFLAGS += -DCAPSTONE_HAS_ARM
-CAP_CFLAGS += -DCAPSTONE_HAS_ARM64
-CAP_CFLAGS += -DCAPSTONE_HAS_POWERPC
-CAP_CFLAGS += -DCAPSTONE_HAS_X86
-
-.PHONY: capstone/all
-capstone/all: .git-submodule-status
-	$(call quiet-command,$(MAKE) -C $(SRC_PATH)/capstone CAPSTONE_SHARED=no BUILDDIR="$(BUILD_DIR)/capstone" CC="$(CC)" AR="$(AR)" LD="$(LD)" RANLIB="$(RANLIB)" CFLAGS="$(CAP_CFLAGS)" $(SUBDIR_MAKEFLAGS) $(BUILD_DIR)/capstone/$(LIBCAPSTONE))
-
 .PHONY: slirp/all
 slirp/all: .git-submodule-status
 	$(call quiet-command,$(MAKE) -C $(SRC_PATH)/slirp		\
diff --git a/meson.build b/meson.build
index f4d1ab1096..f23273693d 100644
--- a/meson.build
+++ b/meson.build
@@ -10,6 +10,7 @@ else
   keyval = import('unstable-keyval')
 endif
 ss = import('sourceset')
+fs = import('fs')
 
 sh = find_program('sh')
 cc = meson.get_compiler('c')
@@ -409,11 +410,6 @@ if 'CONFIG_USB_LIBUSB' in config_host
   libusb = declare_dependency(compile_args: config_host['LIBUSB_CFLAGS'].split(),
                               link_args: config_host['LIBUSB_LIBS'].split())
 endif
-capstone = not_found
-if 'CONFIG_CAPSTONE' in config_host
-  capstone = declare_dependency(compile_args: config_host['CAPSTONE_CFLAGS'].split(),
-                                link_args: config_host['CAPSTONE_LIBS'].split())
-endif
 libpmem = not_found
 if 'CONFIG_LIBPMEM' in config_host
   libpmem = declare_dependency(compile_args: config_host['LIBPMEM_CFLAGS'].split(),
@@ -470,7 +466,6 @@ foreach k, v: config_host
     config_host_data.set(k, v == 'y' ? 1 : v)
   endif
 endforeach
-genh += configure_file(output: 'config-host.h', configuration: config_host_data)
 
 minikconf = find_program('scripts/minikconf.py')
 config_all_devices = {}
@@ -610,6 +605,108 @@ config_all += {
   'CONFIG_ALL': true,
 }
 
+# Submodules
+
+capstone = not_found
+capstone_opt = get_option('capstone')
+if capstone_opt == 'no'
+  capstone_opt = false
+elif capstone_opt in ['yes', 'auto', 'system']
+  have_internal = fs.exists('capstone/Makefile')
+  capstone = dependency('capstone', static: enable_static,
+                        required: capstone_opt == 'system' or
+                                  capstone_opt == 'yes' and not have_internal)
+  if capstone.found()
+    capstone_opt = 'system'
+  elif have_internal
+    capstone_opt = 'internal'
+  else
+    capstone_opt = false
+  endif
+endif
+if capstone_opt == 'internal'
+  capstone_data = configuration_data()
+  capstone_data.set('CAPSTONE_USE_SYS_DYN_MEM', '1')
+
+  capstone_files = files(
+    'capstone/cs.c',
+    'capstone/MCInst.c',
+    'capstone/MCInstrDesc.c',
+    'capstone/MCRegisterInfo.c',
+    'capstone/SStream.c',
+    'capstone/utils.c'
+  )
+
+  if 'CONFIG_ARM_DIS' in config_all_disas
+    capstone_data.set('CAPSTONE_HAS_ARM', '1')
+    capstone_files += files(
+      'capstone/arch/ARM/ARMDisassembler.c',
+      'capstone/arch/ARM/ARMInstPrinter.c',
+      'capstone/arch/ARM/ARMMapping.c',
+      'capstone/arch/ARM/ARMModule.c'
+    )
+  endif
+
+  # FIXME: This config entry currently depends on a c++ compiler.
+  # Which is needed for building libvixl, but not for capstone.
+  if 'CONFIG_ARM_A64_DIS' in config_all_disas
+    capstone_data.set('CAPSTONE_HAS_ARM64', '1')
+    capstone_files += files(
+      'capstone/arch/AArch64/AArch64BaseInfo.c',
+      'capstone/arch/AArch64/AArch64Disassembler.c',
+      'capstone/arch/AArch64/AArch64InstPrinter.c',
+      'capstone/arch/AArch64/AArch64Mapping.c',
+      'capstone/arch/AArch64/AArch64Module.c'
+    )
+  endif
+
+  if 'CONFIG_PPC_DIS' in config_all_disas
+    capstone_data.set('CAPSTONE_HAS_POWERPC', '1')
+    capstone_files += files(
+      'capstone/arch/PowerPC/PPCDisassembler.c',
+      'capstone/arch/PowerPC/PPCInstPrinter.c',
+      'capstone/arch/PowerPC/PPCMapping.c',
+      'capstone/arch/PowerPC/PPCModule.c'
+    )
+  endif
+
+  if 'CONFIG_I386_DIS' in config_all_disas
+    capstone_data.set('CAPSTONE_HAS_X86', 1)
+    capstone_files += files(
+      'capstone/arch/X86/X86Disassembler.c',
+      'capstone/arch/X86/X86DisassemblerDecoder.c',
+      'capstone/arch/X86/X86ATTInstPrinter.c',
+      'capstone/arch/X86/X86IntelInstPrinter.c',
+      'capstone/arch/X86/X86Mapping.c',
+      'capstone/arch/X86/X86Module.c'
+    )
+  endif
+
+  configure_file(output: 'capstone-defs.h', configuration: capstone_data)
+
+  capstone_cargs = [
+    # FIXME: There does not seem to be a way to completely replace the c_args
+    # that come from add_project_arguments() -- we can only add to them.
+    # So: disable all warnings with a big hammer.
+    '-Wno-error', '-w',
+
+    # Include all configuration defines via a header file, which will wind up
+    # as a dependency on the object file, and thus changes here will result
+    # in a rebuild.
+    '-include', 'capstone-defs.h'
+  ]
+
+  libcapstone = static_library('capstone',
+                               sources: capstone_files,
+                               c_args: capstone_cargs,
+                               include_directories: 'capstone/include')
+  capstone = declare_dependency(link_with: libcapstone,
+                                include_directories: 'capstone/include')
+endif
+config_host_data.set('CONFIG_CAPSTONE', capstone.found())
+
+genh += configure_file(output: 'config-host.h', configuration: config_host_data)
+
 # Generators
 
 hxtool = find_program('scripts/hxtool')
@@ -1512,7 +1609,7 @@ summary_info += {'vvfat support':     config_host.has_key('CONFIG_VVFAT')}
 summary_info += {'qed support':       config_host.has_key('CONFIG_QED')}
 summary_info += {'parallels support': config_host.has_key('CONFIG_PARALLELS')}
 summary_info += {'sheepdog support':  config_host.has_key('CONFIG_SHEEPDOG')}
-summary_info += {'capstone':          config_host.has_key('CONFIG_CAPSTONE')}
+summary_info += {'capstone':          capstone_opt}
 summary_info += {'libpmem support':   config_host.has_key('CONFIG_LIBPMEM')}
 summary_info += {'libdaxctl support': config_host.has_key('CONFIG_LIBDAXCTL')}
 summary_info += {'libudev':           config_host.has_key('CONFIG_LIBUDEV')}
diff --git a/meson_options.txt b/meson_options.txt
index 543cf70043..e650a937e7 100644
--- a/meson_options.txt
+++ b/meson_options.txt
@@ -22,3 +22,7 @@ option('vnc_sasl', type : 'feature', value : 'auto',
        description: 'SASL authentication for VNC server')
 option('xkbcommon', type : 'feature', value : 'auto',
        description: 'xkbcommon support')
+
+option('capstone', type: 'combo', value: 'auto',
+       choices: ['no', 'yes', 'auto', 'system', 'internal'],
+       description: 'Whether and how to find the capstone library')
-- 
2.25.1



  reply	other threads:[~2020-09-21 17:47 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-09-21 17:41 [PATCH v4 00/11] capstone + disassembler patches Richard Henderson
2020-09-21 17:41 ` Richard Henderson [this message]
2020-09-21 19:17   ` [PATCH v4 01/11] capstone: Convert Makefile bits to meson bits Alex Bennée
2020-09-21 17:41 ` [PATCH v4 02/11] capstone: Update to upstream "next" branch Richard Henderson
2020-09-21 19:18   ` Alex Bennée
2020-09-21 17:41 ` [PATCH v4 03/11] capstone: Require version 4.0 from a system library Richard Henderson
2020-09-21 19:19   ` Alex Bennée
2020-09-22 10:33   ` Philippe Mathieu-Daudé
2020-09-21 17:41 ` [PATCH v4 04/11] disas: Move host asm annotations to tb_gen_code Richard Henderson
2020-09-21 19:29   ` Alex Bennée
2020-09-21 19:53     ` Richard Henderson
2020-09-22  8:26       ` Philippe Mathieu-Daudé
2020-09-22  9:50         ` Alex Bennée
2020-09-21 17:41 ` [PATCH v4 05/11] disas: Clean up CPUDebug initialization Richard Henderson
2020-09-21 19:32   ` Alex Bennée
2020-09-21 17:41 ` [PATCH v4 06/11] disas: Use qemu/bswap.h for bfd endian loads Richard Henderson
2020-09-21 19:33   ` Alex Bennée
2020-09-21 17:41 ` [PATCH v4 07/11] disas: Cleanup plugin_disas Richard Henderson
2020-09-22 10:38   ` Alex Bennée
2020-09-21 17:41 ` [PATCH v4 08/11] disas: Configure capstone for aarch64 host without libvixl Richard Henderson
2020-09-22 10:48   ` Alex Bennée
2020-09-21 17:41 ` [PATCH v4 09/11] disas: Split out capstone code to disas/capstone.c Richard Henderson
2020-09-22 10:50   ` Alex Bennée
2020-09-21 17:41 ` [PATCH v4 10/11] disas: Enable capstone disassembly for s390x Richard Henderson
2020-09-22 10:58   ` Alex Bennée
2020-09-21 17:41 ` [PATCH v4 11/11] disas/capstone: Add skipdata hook " Richard Henderson
2020-09-22 10:59   ` Alex Bennée
2020-09-22  0:50 ` [PATCH v4 00/11] capstone + disassembler patches no-reply

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200921174118.39352-2-richard.henderson@linaro.org \
    --to=richard.henderson@linaro.org \
    --cc=alex.bennee@linaro.org \
    --cc=pbonzini@redhat.com \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).