qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Peter Maydell <peter.maydell@linaro.org>
To: qemu-arm@nongnu.org, qemu-devel@nongnu.org
Cc: Richard Henderson <richard.henderson@linaro.org>
Subject: [PATCH for-5.1] Makefile: Remove config-devices.mak on "make clean"
Date: Mon, 12 Oct 2020 16:33:27 +0100	[thread overview]
Message-ID: <20201012153408.9747-5-peter.maydell@linaro.org> (raw)
In-Reply-To: <20201012153408.9747-1-peter.maydell@linaro.org>

The config-devices.mak files are generated by "make", and so they
should be deleted by "make clean".

(This is different from config-host.mak and config-all-disas.mak,
which are created by "configure" and so only deleted by
"make distclen".)

If we don't delete these files on "make clean", then the build
tree is left in a state where it has the config-devices.mak
file but not the config-devices.mak.d file, and make will not
realize that it needs to rebuild config-devices.mak if, for
instance, hw/sd/Kconfig changes.

NB: config-all-devices.mak is also generated by "make", but we
already remove it on "make clean".

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
I didn't remove the existing 'rm -f $(SUBDIR_DEVICES_MAK)'
from the 'distclean' rules on the basis that config-all-devices.mak
is explicitly removed in both 'distclean' and 'clean', despite
'distclean' depending on 'clean'...
---
 Makefile | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Makefile b/Makefile
index 32345c610ee..c2120d8d48d 100644
--- a/Makefile
+++ b/Makefile
@@ -775,6 +775,7 @@ clean: recurse-clean
 	rm -f storage-daemon/qapi/qapi-gen-timestamp
 	rm -rf qga/qapi-generated
 	rm -f config-all-devices.mak
+	rm -f $(SUBDIR_DEVICES_MAK)
 
 VERSION ?= $(shell cat VERSION)
 
-- 
2.20.1



  parent reply	other threads:[~2020-10-12 15:38 UTC|newest]

Thread overview: 41+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-10-12 15:33 [PATCH 00/10] target/arm: Various v8.1M minor features Peter Maydell
2020-10-12 15:33 ` [PATCH] Deprecate TileGX port Peter Maydell
2020-10-12 15:42   ` BALATON Zoltan via
2020-10-12 15:44     ` Peter Maydell
2020-10-12 15:33 ` [PATCH] Deprecate Unicore32 port Peter Maydell
2020-10-12 15:33 ` [PATCH] Deprecate lm32 port Peter Maydell
2020-10-12 15:33 ` Peter Maydell [this message]
2020-10-12 15:33 ` [PATCH RISU] arm.risu: Add patterns for fp16 insns Peter Maydell
2020-10-12 15:33 ` [PATCH RISU] arm.risu, thumb.risu: Add v8.2 DP and FHM insns Peter Maydell
2020-10-12 15:33 ` [PATCH] configure: Test that gio libs from pkg-config work Peter Maydell
2020-10-12 15:33 ` [PATCH 01/10] decodetree: Fix codegen for non-overlapping group inside overlapping group Peter Maydell
2020-10-12 15:33 ` [PATCH for-5.1] docs/system/arm/virt: Document mte machine option Peter Maydell
2020-10-12 15:45   ` no-reply
2020-10-12 15:33 ` [PATCH for-5.1] hw/arm/armsse: Assert info->num_cpus is in-bounds in armsse_realize() Peter Maydell
2020-10-12 15:33 ` [PATCH] hw/arm/mps2: New board model mps2-386 Peter Maydell
2020-10-12 15:33 ` [PATCH for-5.1] hw/arm/netduino2, netduinoplus2: Set system_clock_scale Peter Maydell
2020-10-14  0:29   ` Alistair Francis
2020-10-14  0:31     ` Alistair Francis
2020-10-14 12:39       ` Peter Maydell
2020-10-14 14:32         ` Alistair Francis
2020-10-12 15:33 ` [PATCH for-5.1] hw/arm/nrf51_soc: " Peter Maydell
2020-10-12 15:33 ` [PATCH] hw/display/bcm2835_fb.c: Initialize all fields of struct Peter Maydell
2020-10-12 15:33 ` [PATCH] hw/input/virtio-input-hid.c: Don't undef CONFIG_CURSES Peter Maydell
2020-10-12 15:33 ` [PATCH] hw/intc/arm_gicv3_cpuif: Don't copy CPU's maintenance interrupt Peter Maydell
2020-10-12 15:33 ` [PATCH] hw/intc/arm_gicv3_cpuif: Make GIC maintenance interrupts work Peter Maydell
2020-10-12 15:33 ` [PATCH] hw/timer/armv7m_systick: assert that board code set system_clock_scale Peter Maydell
2020-10-12 15:33 ` [PATCH for-5.1] hw/timer/imx_epit: Avoid assertion when CR.SWR is written Peter Maydell
2020-10-12 15:33 ` [PATCH] hw/virtio/virtio-iommu-pci.c: Fix typo in error message Peter Maydell
2020-10-12 15:33 ` [RFC PATCH v2] linux-user: Use FD_32BIT_MODE fd flag for 32-bit guests Peter Maydell
2020-10-12 15:33 ` [PATCH] linux-user/arm/signal.c: Drop TARGET_CONFIG_CPU_32 Peter Maydell
2020-10-12 15:33 ` [PATCH] meson.build: Don't look for libudev for static builds Peter Maydell
2020-10-12 15:33 ` [PATCH] msf2-soc, stellaris: Don't wire up SYSRESETREQ Peter Maydell
2020-10-12 15:33 ` [PATCH] net/tap-solaris.c: Include qemu-common.h for TFR macro Peter Maydell
2020-10-12 15:33 ` [PATCH] osdep.h: Add doc comment for qemu_get_thread_id() Peter Maydell
2020-10-12 15:33 ` [PATCH for-5.1] qapi/machine.json: Fix missing newline in doc comment Peter Maydell
2020-10-12 15:33 ` [PATCH v2] target/arm: Allow user-mode code to write CPSR.E via MSR Peter Maydell
2020-10-12 15:33 ` [PATCH] target/arm: Delete unused ARM_FEATURE_CRC Peter Maydell
2020-10-12 15:33 ` [PATCH] target/arm: Delete unused VFP_DREG macros Peter Maydell
  -- strict thread matches above, loose matches on Subject: below --
2020-07-17 15:25 [PATCH for-5.1] Makefile: Remove config-devices.mak on "make clean" Peter Maydell
2020-07-17 15:30 ` Philippe Mathieu-Daudé
2020-07-20 10:07   ` Peter Maydell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201012153408.9747-5-peter.maydell@linaro.org \
    --to=peter.maydell@linaro.org \
    --cc=qemu-arm@nongnu.org \
    --cc=qemu-devel@nongnu.org \
    --cc=richard.henderson@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).