QEMU-Devel Archive on lore.kernel.org
 help / color / Atom feed
From: Paolo Bonzini <pbonzini@redhat.com>
To: qemu-devel@nongnu.org
Cc: Yonggang Luo <luoyonggang@gmail.com>
Subject: [PULL 18/22] meson: Move the detection logic for sphinx to meson
Date: Fri, 16 Oct 2020 11:53:31 -0400
Message-ID: <20201016155331.1613089-2-pbonzini@redhat.com> (raw)
In-Reply-To: <20201016155331.1613089-1-pbonzini@redhat.com>

From: Yonggang Luo <luoyonggang@gmail.com>

Signed-off-by: Yonggang Luo <luoyonggang@gmail.com>
Message-Id: <20201015220626.418-4-luoyonggang@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
 configure         | 59 ++++-------------------------------------------
 docs/meson.build  | 46 ++++++++++++++++++++++++++++++++++++
 meson.build       | 30 ++++++++----------------
 meson_options.txt |  4 ++++
 4 files changed, 64 insertions(+), 75 deletions(-)

diff --git a/configure b/configure
index 3edbdd2a24..68f097861d 100755
--- a/configure
+++ b/configure
@@ -297,7 +297,7 @@ brlapi=""
 curl=""
 iconv="auto"
 curses="auto"
-docs=""
+docs="auto"
 fdt="auto"
 netmap="no"
 sdl="auto"
@@ -820,15 +820,6 @@ do
     fi
 done
 
-sphinx_build=
-for binary in sphinx-build-3 sphinx-build
-do
-    if has "$binary"
-    then
-        sphinx_build=$(command -v "$binary")
-        break
-    fi
-done
 
 # Check for ancillary tools used in testing
 genisoimage=
@@ -1228,9 +1219,9 @@ for opt do
   ;;
   --disable-crypto-afalg) crypto_afalg="no"
   ;;
-  --disable-docs) docs="no"
+  --disable-docs) docs="disabled"
   ;;
-  --enable-docs) docs="yes"
+  --enable-docs) docs="enabled"
   ;;
   --disable-vhost-net) vhost_net="no"
   ;;
@@ -4419,45 +4410,6 @@ if check_include linux/btrfs.h ; then
     btrfs=yes
 fi
 
-# If we're making warnings fatal, apply this to Sphinx runs as well
-sphinx_werror=""
-if test "$werror" = "yes"; then
-    sphinx_werror="-W"
-fi
-
-# Check we have a new enough version of sphinx-build
-has_sphinx_build() {
-    # This is a bit awkward but works: create a trivial document and
-    # try to run it with our configuration file (which enforces a
-    # version requirement). This will fail if either
-    # sphinx-build doesn't exist at all or if it is too old.
-    mkdir -p "$TMPDIR1/sphinx"
-    touch "$TMPDIR1/sphinx/index.rst"
-    "$sphinx_build" $sphinx_werror -c "$source_path/docs" \
-                    -b html "$TMPDIR1/sphinx" \
-                    "$TMPDIR1/sphinx/out"  >> config.log 2>&1
-}
-
-# Check if tools are available to build documentation.
-if test "$docs" != "no" ; then
-  if has_sphinx_build; then
-    sphinx_ok=yes
-  else
-    sphinx_ok=no
-  fi
-  if test "$sphinx_ok" = "yes"; then
-    docs=yes
-  else
-    if test "$docs" = "yes" ; then
-      if has $sphinx_build && test "$sphinx_ok" != "yes"; then
-        echo "Warning: $sphinx_build exists but it is either too old or uses too old a Python version" >&2
-      fi
-      feature_not_found "docs" "Install a Python 3 version of python-sphinx"
-    fi
-    docs=no
-  fi
-fi
-
 # Search for bswap_32 function
 byteswap_h=no
 cat > $TMPC << EOF
@@ -6093,9 +6045,6 @@ qemu_version=$(head $source_path/VERSION)
 echo "PKGVERSION=$pkgversion" >>$config_host_mak
 echo "SRC_PATH=$source_path" >> $config_host_mak
 echo "TARGET_DIRS=$target_list" >> $config_host_mak
-if [ "$docs" = "yes" ] ; then
-  echo "BUILD_DOCS=yes" >> $config_host_mak
-fi
 if test "$modules" = "yes"; then
   # $shacmd can generate a hash started with digit, which the compiler doesn't
   # like as an symbol. So prefix it with an underscore
@@ -6784,7 +6733,6 @@ fi
 echo "ROMS=$roms" >> $config_host_mak
 echo "MAKE=$make" >> $config_host_mak
 echo "PYTHON=$python" >> $config_host_mak
-echo "SPHINX_BUILD=$sphinx_build" >> $config_host_mak
 echo "GENISOIMAGE=$genisoimage" >> $config_host_mak
 echo "MESON=$meson" >> $config_host_mak
 echo "NINJA=$ninja" >> $config_host_mak
@@ -7066,6 +7014,7 @@ NINJA=$ninja $meson setup \
         -Dgettext=$gettext -Dxkbcommon=$xkbcommon -Du2f=$u2f \
         -Dcapstone=$capstone -Dslirp=$slirp -Dfdt=$fdt \
         -Diconv=$iconv -Dcurses=$curses -Dlibudev=$libudev\
+        -Ddocs=$docs -Dsphinx_build=$sphinx_build \
         $cross_arg \
         "$PWD" "$source_path"
 
diff --git a/docs/meson.build b/docs/meson.build
index 0340d489ac..8c222f96bb 100644
--- a/docs/meson.build
+++ b/docs/meson.build
@@ -1,4 +1,50 @@
+if get_option('sphinx_build') == ''
+  sphinx_build = find_program(['sphinx-build-3', 'sphinx-build'],
+                              required: get_option('docs'))
+else
+  sphinx_build = find_program(get_option('sphinx_build'),
+                              required: get_option('docs'))
+endif
+
+# Check if tools are available to build documentation.
+build_docs = false
+if sphinx_build.found()
+  SPHINX_ARGS = [sphinx_build]
+  # If we're making warnings fatal, apply this to Sphinx runs as well
+  if get_option('werror')
+    SPHINX_ARGS += [ '-W' ]
+  endif
+
+  # This is a bit awkward but works: create a trivial document and
+  # try to run it with our configuration file (which enforces a
+  # version requirement). This will fail if sphinx-build is too old.
+  run_command('mkdir', ['-p', tmpdir / 'sphinx'])
+  run_command('touch', [tmpdir / 'sphinx/index.rst'])
+  sphinx_build_test_out = run_command(SPHINX_ARGS + [
+    '-c', meson.current_source_dir(),
+    '-b', 'html', tmpdir / 'sphinx',
+    tmpdir / 'sphinx/out'])
+  build_docs = (sphinx_build_test_out.returncode() == 0)
+
+  if not build_docs
+    warning('@0@ exists but it is either too old or uses too old a Python version'.format(get_option('sphinx_build')))
+    if get_option('docs').enabled()
+      error('Install a Python 3 version of python-sphinx')
+    endif
+  endif
+endif
+
 if build_docs
+  SPHINX_ARGS += ['-Dversion=' + meson.project_version(), '-Drelease=' + config_host['PKGVERSION']]
+
+  sphinx_extn_depends = [ meson.source_root() / 'docs/sphinx/depfile.py',
+                          meson.source_root() / 'docs/sphinx/hxtool.py',
+                          meson.source_root() / 'docs/sphinx/kerneldoc.py',
+                          meson.source_root() / 'docs/sphinx/kernellog.py',
+                          meson.source_root() / 'docs/sphinx/qapidoc.py',
+                          meson.source_root() / 'docs/sphinx/qmp_lexer.py',
+                          qapi_gen_depends ]
+
   configure_file(output: 'index.html',
                  input: files('index.html.in'),
                  configuration: {'VERSION': meson.project_version()},
diff --git a/meson.build b/meson.build
index 15732f4701..05fb59a00b 100644
--- a/meson.build
+++ b/meson.build
@@ -17,7 +17,13 @@ cc = meson.get_compiler('c')
 config_host = keyval.load(meson.current_build_dir() / 'config-host.mak')
 enable_modules = 'CONFIG_MODULES' in config_host
 enable_static = 'CONFIG_STATIC' in config_host
-build_docs = 'BUILD_DOCS' in config_host
+
+# Temporary directory used for files created while
+# configure runs. Since it is in the build directory
+# we can safely blow away any previous version of it
+# (and we need not jump through hoops to try to delete
+# it when configure exits.)
+tmpdir = meson.current_build_dir() / 'meson-private/temp'
 
 if get_option('qemu_suffix').startswith('/')
   error('qemu_suffix cannot start with a /')
@@ -1266,22 +1272,6 @@ foreach d : hx_headers
 endforeach
 genh += hxdep
 
-SPHINX_ARGS = [config_host['SPHINX_BUILD'],
-               '-Dversion=' + meson.project_version(),
-               '-Drelease=' + config_host['PKGVERSION']]
-
-if get_option('werror')
-  SPHINX_ARGS += [ '-W' ]
-endif
-
-sphinx_extn_depends = [ meson.source_root() / 'docs/sphinx/depfile.py',
-                        meson.source_root() / 'docs/sphinx/hxtool.py',
-                        meson.source_root() / 'docs/sphinx/kerneldoc.py',
-                        meson.source_root() / 'docs/sphinx/kernellog.py',
-                        meson.source_root() / 'docs/sphinx/qapidoc.py',
-                        meson.source_root() / 'docs/sphinx/qmp_lexer.py',
-                        qapi_gen_depends ]
-
 ###################
 # Collect sources #
 ###################
@@ -1866,8 +1856,8 @@ endif
 subdir('scripts')
 subdir('tools')
 subdir('pc-bios')
-subdir('tests')
 subdir('docs')
+subdir('tests')
 if 'CONFIG_GTK' in config_host
   subdir('po')
 endif
@@ -1949,7 +1939,7 @@ summary_info += {'QEMU_CFLAGS':       config_host['QEMU_CFLAGS']}
 summary_info += {'QEMU_LDFLAGS':      config_host['QEMU_LDFLAGS']}
 summary_info += {'make':              config_host['MAKE']}
 summary_info += {'python':            '@0@ (version: @1@)'.format(python.full_path(), python.language_version())}
-summary_info += {'sphinx-build':      config_host['SPHINX_BUILD']}
+summary_info += {'sphinx-build':      sphinx_build.found()}
 summary_info += {'genisoimage':       config_host['GENISOIMAGE']}
 # TODO: add back version
 summary_info += {'slirp support':     slirp_opt == 'disabled' ? false : slirp_opt}
@@ -2017,7 +2007,7 @@ if config_host.has_key('CONFIG_XEN_BACKEND')
   summary_info += {'xen ctrl version':  config_host['CONFIG_XEN_CTRL_INTERFACE_VERSION']}
 endif
 summary_info += {'brlapi support':    config_host.has_key('CONFIG_BRLAPI')}
-summary_info += {'Documentation':     config_host.has_key('BUILD_DOCS')}
+summary_info += {'Documentation':     build_docs}
 summary_info += {'PIE':               get_option('b_pie')}
 summary_info += {'vde support':       config_host.has_key('CONFIG_VDE')}
 summary_info += {'netmap support':    config_host.has_key('CONFIG_NETMAP')}
diff --git a/meson_options.txt b/meson_options.txt
index 77b3fabd00..967229b66e 100644
--- a/meson_options.txt
+++ b/meson_options.txt
@@ -2,7 +2,11 @@ option('qemu_suffix', type : 'string', value: 'qemu',
        description: 'Suffix for QEMU data/modules/config directories (can be empty)')
 option('docdir', type : 'string', value : 'doc',
        description: 'Base directory for documentation installation (can be empty)')
+option('sphinx_build', type : 'string', value : '',
+       description: 'Use specified sphinx-build [$sphinx_build] for building document (default to be empty)')
 
+option('docs', type : 'feature', value : 'auto',
+       description: 'Documentations build support')
 option('gettext', type : 'boolean', value : true,
        description: 'Localization of the GTK+ user interface')
 option('sparse', type : 'feature', value : 'auto',
-- 
2.26.2



  reply index

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-10-16 15:53 [PULL v2 00/22] Build system + misc changes for 2020-10-16 Paolo Bonzini
2020-10-16 15:53 ` Paolo Bonzini [this message]
2020-10-17 13:09 ` Peter Maydell
2020-10-17 13:22   ` Peter Maydell
2020-10-17 13:39     ` Paolo Bonzini
2020-10-17 13:38   ` Paolo Bonzini
2020-10-17 14:39     ` Peter Maydell
2020-10-17 15:37       ` Paolo Bonzini
2020-10-17 16:16         ` 罗勇刚(Yonggang Luo)
2020-10-17 16:37         ` Paolo Bonzini
2020-10-17 19:48           ` Peter Maydell
2020-10-19  8:12             ` Paolo Bonzini
  -- strict thread matches above, loose matches on Subject: below --
2020-10-16 11:47 [PULL " Paolo Bonzini
2020-10-16 11:48 ` [PULL 18/22] meson: Move the detection logic for sphinx to meson Paolo Bonzini
2020-10-16 13:27   ` 罗勇刚(Yonggang Luo)
2020-10-19 19:40     ` Eric Blake

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201016155331.1613089-2-pbonzini@redhat.com \
    --to=pbonzini@redhat.com \
    --cc=luoyonggang@gmail.com \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

QEMU-Devel Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/qemu-devel/0 qemu-devel/git/0.git
	git clone --mirror https://lore.kernel.org/qemu-devel/1 qemu-devel/git/1.git
	git clone --mirror https://lore.kernel.org/qemu-devel/2 qemu-devel/git/2.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 qemu-devel qemu-devel/ https://lore.kernel.org/qemu-devel \
		qemu-devel@nongnu.org
	public-inbox-index qemu-devel

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.nongnu.qemu-devel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git