qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
To: qemu-block@nongnu.org
Cc: qemu-devel@nongnu.org, armbru@redhat.com, berto@igalia.com,
	vsementsov@virtuozzo.com, eblake@redhat.com, jsnow@redhat.com,
	stefanha@redhat.com, pbonzini@redhat.com,
	pavel.dovgaluk@ispras.ru, ari@tuxera.com, mreitz@redhat.com,
	kwolf@redhat.com, den@openvz.org, Greg Kurz <groug@kaod.org>
Subject: [PATCH v3 13/13] block/qed: bdrv_qed_do_open: deal with errp
Date: Fri, 16 Oct 2020 20:10:57 +0300	[thread overview]
Message-ID: <20201016171057.6182-14-vsementsov@virtuozzo.com> (raw)
In-Reply-To: <20201016171057.6182-1-vsementsov@virtuozzo.com>

Set errp always on failure. Generic bdrv_open_driver supports driver
functions which can return negative value and forget to set errp.
That's a strange thing.. Let's improve bdrv_qed_do_open to not behave
this way. This allows to simplify code in
bdrv_qed_co_invalidate_cache().

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
---
 block/qed.c | 24 +++++++++++++++---------
 1 file changed, 15 insertions(+), 9 deletions(-)

diff --git a/block/qed.c b/block/qed.c
index b27e7546ca..f45c640513 100644
--- a/block/qed.c
+++ b/block/qed.c
@@ -393,6 +393,7 @@ static int coroutine_fn bdrv_qed_do_open(BlockDriverState *bs, QDict *options,
 
     ret = bdrv_pread(bs->file, 0, &le_header, sizeof(le_header));
     if (ret < 0) {
+        error_setg(errp, "Failed to read QED header");
         return ret;
     }
     qed_header_le_to_cpu(&le_header, &s->header);
@@ -408,25 +409,30 @@ static int coroutine_fn bdrv_qed_do_open(BlockDriverState *bs, QDict *options,
         return -ENOTSUP;
     }
     if (!qed_is_cluster_size_valid(s->header.cluster_size)) {
+        error_setg(errp, "QED cluster size is invalid");
         return -EINVAL;
     }
 
     /* Round down file size to the last cluster */
     file_size = bdrv_getlength(bs->file->bs);
     if (file_size < 0) {
+        error_setg(errp, "Failed to get file length");
         return file_size;
     }
     s->file_size = qed_start_of_cluster(s, file_size);
 
     if (!qed_is_table_size_valid(s->header.table_size)) {
+        error_setg(errp, "QED table size is invalid");
         return -EINVAL;
     }
     if (!qed_is_image_size_valid(s->header.image_size,
                                  s->header.cluster_size,
                                  s->header.table_size)) {
+        error_setg(errp, "QED image size is invalid");
         return -EINVAL;
     }
     if (!qed_check_table_offset(s, s->header.l1_table_offset)) {
+        error_setg(errp, "QED table offset is invalid");
         return -EINVAL;
     }
 
@@ -438,6 +444,7 @@ static int coroutine_fn bdrv_qed_do_open(BlockDriverState *bs, QDict *options,
 
     /* Header size calculation must not overflow uint32_t */
     if (s->header.header_size > UINT32_MAX / s->header.cluster_size) {
+        error_setg(errp, "QED header size is too large");
         return -EINVAL;
     }
 
@@ -445,6 +452,7 @@ static int coroutine_fn bdrv_qed_do_open(BlockDriverState *bs, QDict *options,
         if ((uint64_t)s->header.backing_filename_offset +
             s->header.backing_filename_size >
             s->header.cluster_size * s->header.header_size) {
+            error_setg(errp, "QED backing filename offset is invalid");
             return -EINVAL;
         }
 
@@ -453,6 +461,7 @@ static int coroutine_fn bdrv_qed_do_open(BlockDriverState *bs, QDict *options,
                               bs->auto_backing_file,
                               sizeof(bs->auto_backing_file));
         if (ret < 0) {
+            error_setg(errp, "Failed to read backing filename");
             return ret;
         }
         pstrcpy(bs->backing_file, sizeof(bs->backing_file),
@@ -475,6 +484,7 @@ static int coroutine_fn bdrv_qed_do_open(BlockDriverState *bs, QDict *options,
 
         ret = qed_write_header_sync(s);
         if (ret) {
+            error_setg(errp, "Failed to update header");
             return ret;
         }
 
@@ -487,6 +497,7 @@ static int coroutine_fn bdrv_qed_do_open(BlockDriverState *bs, QDict *options,
 
     ret = qed_read_l1_table_sync(s);
     if (ret) {
+        error_setg(errp, "Failed to read L1 table");
         goto out;
     }
 
@@ -503,6 +514,7 @@ static int coroutine_fn bdrv_qed_do_open(BlockDriverState *bs, QDict *options,
 
             ret = qed_check(s, &result, true);
             if (ret) {
+                error_setg(errp, "Image corrupted");
                 goto out;
             }
         }
@@ -1537,22 +1549,16 @@ static void coroutine_fn bdrv_qed_co_invalidate_cache(BlockDriverState *bs,
                                                       Error **errp)
 {
     BDRVQEDState *s = bs->opaque;
-    Error *local_err = NULL;
     int ret;
 
     bdrv_qed_close(bs);
 
     bdrv_qed_init_state(bs);
     qemu_co_mutex_lock(&s->table_lock);
-    ret = bdrv_qed_do_open(bs, NULL, bs->open_flags, &local_err);
+    ret = bdrv_qed_do_open(bs, NULL, bs->open_flags, errp);
     qemu_co_mutex_unlock(&s->table_lock);
-    if (local_err) {
-        error_propagate_prepend(errp, local_err,
-                                "Could not reopen qed layer: ");
-        return;
-    } else if (ret < 0) {
-        error_setg_errno(errp, -ret, "Could not reopen qed layer");
-        return;
+    if (ret < 0) {
+        error_prepend(errp, "Could not reopen qed layer: ");
     }
 }
 
-- 
2.21.3



      parent reply	other threads:[~2020-10-16 17:28 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-10-16 17:10 [PATCH v3 00/13] block: deal with errp: part I Vladimir Sementsov-Ogievskiy
2020-10-16 17:10 ` [PATCH v3 01/13] block: return status from bdrv_append and friends Vladimir Sementsov-Ogievskiy
2020-10-19 11:50   ` Kevin Wolf
2020-10-16 17:10 ` [PATCH v3 02/13] block: use return status of bdrv_append() Vladimir Sementsov-Ogievskiy
2020-10-19 12:13   ` Kevin Wolf
2020-10-19 15:45     ` Markus Armbruster
2020-10-19 16:10       ` Kevin Wolf
2020-10-16 17:10 ` [PATCH v3 03/13] block: check return value of bdrv_open_child and drop error propagation Vladimir Sementsov-Ogievskiy
2020-10-16 17:10 ` [PATCH v3 04/13] blockdev: fix drive_backup_prepare() missed error Vladimir Sementsov-Ogievskiy
2020-10-16 17:10 ` [PATCH v3 05/13] block: drop extra error propagation for bdrv_set_backing_hd Vladimir Sementsov-Ogievskiy
2020-10-16 17:10 ` [PATCH v3 06/13] block/mirror: drop extra error propagation in commit_active_start() Vladimir Sementsov-Ogievskiy
2020-10-16 17:10 ` [PATCH v3 07/13] blockjob: return status from block_job_set_speed() Vladimir Sementsov-Ogievskiy
2020-10-16 17:10 ` [PATCH v3 08/13] block/qcow2: qcow2_get_specific_info(): drop error propagation Vladimir Sementsov-Ogievskiy
2020-10-16 17:10 ` [PATCH v3 09/13] block/qcow2-bitmap: improve qcow2_load_dirty_bitmaps() interface Vladimir Sementsov-Ogievskiy
2020-10-16 17:10 ` [PATCH v3 10/13] block/qcow2-bitmap: return status from qcow2_store_persistent_dirty_bitmaps Vladimir Sementsov-Ogievskiy
2020-10-16 17:10 ` [PATCH v3 11/13] block/qcow2: read_cache_sizes: return status value Vladimir Sementsov-Ogievskiy
2020-10-16 17:10 ` [PATCH v3 12/13] block/qcow2: simplify qcow2_co_invalidate_cache() Vladimir Sementsov-Ogievskiy
2020-10-19 13:06   ` Kevin Wolf
2020-10-20 12:46     ` Vladimir Sementsov-Ogievskiy
2020-10-16 17:10 ` Vladimir Sementsov-Ogievskiy [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201016171057.6182-14-vsementsov@virtuozzo.com \
    --to=vsementsov@virtuozzo.com \
    --cc=ari@tuxera.com \
    --cc=armbru@redhat.com \
    --cc=berto@igalia.com \
    --cc=den@openvz.org \
    --cc=eblake@redhat.com \
    --cc=groug@kaod.org \
    --cc=jsnow@redhat.com \
    --cc=kwolf@redhat.com \
    --cc=mreitz@redhat.com \
    --cc=pavel.dovgaluk@ispras.ru \
    --cc=pbonzini@redhat.com \
    --cc=qemu-block@nongnu.org \
    --cc=qemu-devel@nongnu.org \
    --cc=stefanha@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).