qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Richard Henderson <richard.henderson@linaro.org>
To: qemu-devel@nongnu.org
Cc: peter.maydell@linaro.org, qemu-arm@nongnu.org
Subject: [PATCH v3 12/21] linux-user/aarch64: Implement PR_TAGGED_ADDR_ENABLE
Date: Fri, 15 Jan 2021 12:46:36 -1000	[thread overview]
Message-ID: <20210115224645.1196742-13-richard.henderson@linaro.org> (raw)
In-Reply-To: <20210115224645.1196742-1-richard.henderson@linaro.org>

This is the prctl bit that controls whether syscalls accept tagged
addresses.  See Documentation/arm64/tagged-address-abi.rst in the
linux kernel.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
 linux-user/aarch64/target_syscall.h |  4 ++++
 target/arm/cpu-param.h              |  3 +++
 target/arm/cpu.h                    | 23 +++++++++++++++++++++++
 linux-user/syscall.c                | 25 +++++++++++++++++++++++++
 target/arm/cpu.c                    |  3 +++
 5 files changed, 58 insertions(+)

diff --git a/linux-user/aarch64/target_syscall.h b/linux-user/aarch64/target_syscall.h
index 3194e6b009..820601dfcc 100644
--- a/linux-user/aarch64/target_syscall.h
+++ b/linux-user/aarch64/target_syscall.h
@@ -30,4 +30,8 @@ struct target_pt_regs {
 # define TARGET_PR_PAC_APDBKEY   (1 << 3)
 # define TARGET_PR_PAC_APGAKEY   (1 << 4)
 
+#define TARGET_PR_SET_TAGGED_ADDR_CTRL 55
+#define TARGET_PR_GET_TAGGED_ADDR_CTRL 56
+# define TARGET_PR_TAGGED_ADDR_ENABLE  (1UL << 0)
+
 #endif /* AARCH64_TARGET_SYSCALL_H */
diff --git a/target/arm/cpu-param.h b/target/arm/cpu-param.h
index 6321385b46..f922aa0650 100644
--- a/target/arm/cpu-param.h
+++ b/target/arm/cpu-param.h
@@ -20,6 +20,9 @@
 
 #ifdef CONFIG_USER_ONLY
 #define TARGET_PAGE_BITS 12
+# ifdef TARGET_AARCH64
+#  define TARGET_TAGGED_ADDRESSES
+# endif
 #else
 /*
  * ARMv7 and later CPUs have 4K pages minimum, but ARMv5 and v6
diff --git a/target/arm/cpu.h b/target/arm/cpu.h
index f3bca73d98..6ddfd9ebe6 100644
--- a/target/arm/cpu.h
+++ b/target/arm/cpu.h
@@ -712,6 +712,10 @@ typedef struct CPUARMState {
     const struct arm_boot_info *boot_info;
     /* Store GICv3CPUState to access from this struct */
     void *gicv3state;
+
+#ifdef TARGET_TAGGED_ADDRESSES
+    target_ulong untagged_addr_mask;
+#endif
 } CPUARMState;
 
 static inline void set_feature(CPUARMState *env, int feature)
@@ -3556,6 +3560,25 @@ static inline MemTxAttrs *typecheck_memtxattrs(MemTxAttrs *x)
  */
 #define PAGE_BTI  PAGE_TARGET_1
 
+#ifdef TARGET_TAGGED_ADDRESSES
+/**
+ * cpu_untagged_addr:
+ * @cs: CPU context
+ * @x: tagged address
+ *
+ * Remove any address tag from @x.  This is explicitly related to the
+ * linux syscall TIF_TAGGED_ADDR setting, not TBI in general.
+ *
+ * There should be a better place to put this, but we need this in
+ * include/exec/cpu_ldst.h, and not some place linux-user specific.
+ */
+static inline target_ulong cpu_untagged_addr(CPUState *cs, target_ulong x)
+{
+    ARMCPU *cpu = ARM_CPU(cs);
+    return x & cpu->env.untagged_addr_mask;
+}
+#endif
+
 /*
  * Naming convention for isar_feature functions:
  * Functions which test 32-bit ID registers should have _aa32_ in
diff --git a/linux-user/syscall.c b/linux-user/syscall.c
index bec2ab7769..ebb4e2898c 100644
--- a/linux-user/syscall.c
+++ b/linux-user/syscall.c
@@ -10948,6 +10948,31 @@ static abi_long do_syscall1(void *cpu_env, int num, abi_long arg1,
                 }
             }
             return -TARGET_EINVAL;
+        case TARGET_PR_SET_TAGGED_ADDR_CTRL:
+            {
+                abi_ulong valid_mask = TARGET_PR_TAGGED_ADDR_ENABLE;
+                CPUARMState *env = cpu_env;
+
+                if ((arg2 & ~valid_mask) || arg3 || arg4 || arg5) {
+                    return -TARGET_EINVAL;
+                }
+                env->untagged_addr_mask = (arg2 & TARGET_PR_TAGGED_ADDR_ENABLE
+                                           ? MAKE_64BIT_MASK(0, 56) : -1);
+                return 0;
+            }
+        case TARGET_PR_GET_TAGGED_ADDR_CTRL:
+            {
+                abi_long ret = 0;
+                CPUARMState *env = cpu_env;
+
+                if (arg2 || arg3 || arg4 || arg5) {
+                    return -TARGET_EINVAL;
+                }
+                if (env->untagged_addr_mask != -1) {
+                    ret |= TARGET_PR_TAGGED_ADDR_ENABLE;
+                }
+                return ret;
+            }
 #endif /* AARCH64 */
         case PR_GET_SECCOMP:
         case PR_SET_SECCOMP:
diff --git a/target/arm/cpu.c b/target/arm/cpu.c
index 8387e94b94..abc0affd00 100644
--- a/target/arm/cpu.c
+++ b/target/arm/cpu.c
@@ -208,6 +208,9 @@ static void arm_cpu_reset(DeviceState *dev)
          * Do not modify this without other changes.
          */
         env->cp15.tcr_el[1].raw_tcr = (3ULL << 37);
+# ifdef TARGET_TAGGED_ADDRESSES
+        env->untagged_addr_mask = -1;
+# endif
 #else
         /* Reset into the highest available EL */
         if (arm_feature(env, ARM_FEATURE_EL3)) {
-- 
2.25.1



  parent reply	other threads:[~2021-01-15 23:03 UTC|newest]

Thread overview: 46+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-01-15 22:46 [PATCH v3 00/21] target-arm: Implement ARMv8.5-MemTag, user mode Richard Henderson
2021-01-15 22:46 ` [PATCH v3 01/21] tcg: Introduce target-specific page data for user-only Richard Henderson
2021-01-19 16:53   ` Peter Maydell
2021-01-15 22:46 ` [PATCH v3 02/21] linux-user: Introduce PAGE_ANON Richard Henderson
2021-01-15 22:46 ` [PATCH v3 03/21] exec: Use uintptr_t for guest_base Richard Henderson
2021-01-19 16:56   ` Peter Maydell
2021-01-15 22:46 ` [PATCH v3 04/21] exec: Use uintptr_t in cpu_ldst.h Richard Henderson
2021-01-19 16:56   ` Peter Maydell
2021-01-15 22:46 ` [PATCH v3 05/21] exec: Improve types for guest_addr_valid Richard Henderson
2021-01-19 16:57   ` Peter Maydell
2021-01-15 22:46 ` [PATCH v3 06/21] linux-user: Check for overflow in access_ok Richard Henderson
2021-01-15 22:46 ` [PATCH v3 07/21] linux-user: Tidy VERIFY_READ/VERIFY_WRITE Richard Henderson
2021-01-15 22:46 ` [PATCH v3 08/21] bsd-user: " Richard Henderson
2021-01-16 16:28   ` Warner Losh
2021-01-15 22:46 ` [PATCH v3 09/21] linux-user: Do not use guest_addr_valid for h2g_valid Richard Henderson
2021-01-19 16:59   ` Peter Maydell
2021-01-15 22:46 ` [PATCH v3 10/21] linux-user: Fix guest_addr_valid vs reserved_va Richard Henderson
2021-01-19 17:03   ` Peter Maydell
2021-01-19 17:41     ` Richard Henderson
2021-01-15 22:46 ` [PATCH v3 11/21] exec: Add support for TARGET_TAGGED_ADDRESSES Richard Henderson
2021-01-22 14:13   ` Peter Maydell
2021-01-26 17:10     ` Richard Henderson
2021-01-15 22:46 ` Richard Henderson [this message]
2021-01-22 11:36   ` [PATCH v3 12/21] linux-user/aarch64: Implement PR_TAGGED_ADDR_ENABLE Peter Maydell
2021-01-22 11:53   ` Peter Maydell
2021-01-22 12:02     ` Peter Maydell
2021-01-15 22:46 ` [PATCH v3 13/21] linux-user/aarch64: Implement PR_MTE_TCF and PR_MTE_TAG Richard Henderson
2021-01-22 11:48   ` Peter Maydell
2021-01-15 22:46 ` [PATCH v3 14/21] linux-user/aarch64: Implement PROT_MTE Richard Henderson
2021-01-15 22:46 ` [PATCH v3 15/21] target/arm: Split out syndrome.h from internals.h Richard Henderson
2021-01-19 17:07   ` Peter Maydell
2021-01-15 22:46 ` [PATCH v3 16/21] linux-user/aarch64: Pass syndrome to EXC_*_ABORT Richard Henderson
2021-01-19 17:12   ` Peter Maydell
2021-01-15 22:46 ` [PATCH v3 17/21] linux-user/aarch64: Signal SEGV_MTESERR for sync tag check fault Richard Henderson
2021-01-22 12:03   ` Peter Maydell
2021-01-15 22:46 ` [PATCH v3 18/21] linux-user/aarch64: Signal SEGV_MTEAERR for async tag check error Richard Henderson
2021-01-22 13:59   ` Peter Maydell
2021-01-28  8:49     ` Richard Henderson
2021-01-28 10:44       ` Peter Maydell
2021-01-15 22:46 ` [PATCH v3 19/21] target/arm: Add allocation tag storage for user mode Richard Henderson
2021-01-22 14:05   ` Peter Maydell
2021-01-15 22:46 ` [PATCH v3 20/21] target/arm: Enable MTE for user-only Richard Henderson
2021-01-22 14:02   ` Peter Maydell
2021-01-15 22:46 ` [PATCH v3 21/21] tests/tcg/aarch64: Add mte smoke tests Richard Henderson
2021-01-22 14:04   ` Peter Maydell
2021-01-15 23:15 ` [PATCH v3 00/21] target-arm: Implement ARMv8.5-MemTag, user mode no-reply

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210115224645.1196742-13-richard.henderson@linaro.org \
    --to=richard.henderson@linaro.org \
    --cc=peter.maydell@linaro.org \
    --cc=qemu-arm@nongnu.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).