QEMU-Devel Archive on lore.kernel.org
 help / color / Atom feed
From: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
To: qemu-block@nongnu.org
Cc: kwolf@redhat.com, vsementsov@virtuozzo.com,
	wencongyang2@huawei.com, xiechanglong.d@gmail.com,
	qemu-devel@nongnu.org, armbru@redhat.com, jsnow@redhat.com,
	den@openvz.org, mreitz@redhat.com
Subject: [PATCH v4 00/23] backup performance: block_status + async
Date: Sun, 17 Jan 2021 00:46:42 +0300
Message-ID: <20210116214705.822267-1-vsementsov@virtuozzo.com> (raw)

Hi Max!
I applied my series onto yours 129-fixing and found, that 129 fails for backup.
And setting small max-chunk and even max-workers to 1 doesn't help! (setting
speed like in v3 still helps).

And I found, that the problem is that really, the whole backup job goes during
drain, because in new architecture we do just job_yield() during the whole
background block-copy.

This leads to modifying the existing patch in the series, which does job_enter()
from job_user_pause: we just need call job_enter() from job_pause() to cover
not only user pauses but also drained_begin.

So, now I don't need any additional fixing of 129.

Changes in v4:
- add a lot of Max's r-b's, thanks!

03: fix over-80 line (in comment), add r-b
09: was "[PATCH v3 10/25] job: call job_enter from job_user_pause",
    now changed to finally fix 129 iotest, drop r-b

10: squash-in additional wording on max-chunk, fix error message, keep r-b
17: drop extra include, assert job_is_cancelled() instead of check, add r-b
18: adjust commit message, add r-b
23: add comments and assertion, about the fact that test doesn't support
    paths with colon inside
    fix s/disable-copy-range/use-copy-range/

Vladimir Sementsov-Ogievskiy (23):
  qapi: backup: add perf.use-copy-range parameter
  block/block-copy: More explicit call_state
  block/block-copy: implement block_copy_async
  block/block-copy: add max_chunk and max_workers parameters
  block/block-copy: add list of all call-states
  block/block-copy: add ratelimit to block-copy
  block/block-copy: add block_copy_cancel
  blockjob: add set_speed to BlockJobDriver
  job: call job_enter from job_pause
  qapi: backup: add max-chunk and max-workers to x-perf struct
  iotests: 56: prepare for backup over block-copy
  iotests: 185: prepare for backup over block-copy
  iotests: 219: prepare for backup over block-copy
  iotests: 257: prepare for backup over block-copy
  block/block-copy: make progress_bytes_callback optional
  block/backup: drop extra gotos from backup_run()
  backup: move to block-copy
  qapi: backup: disable copy_range by default
  block/block-copy: drop unused block_copy_set_progress_callback()
  block/block-copy: drop unused argument of block_copy()
  simplebench/bench_block_job: use correct shebang line with python3
  simplebench: bench_block_job: add cmd_options argument
  simplebench: add bench-backup.py

 qapi/block-core.json                   |  28 ++-
 block/backup-top.h                     |   1 +
 include/block/block-copy.h             |  61 ++++-
 include/block/block_int.h              |   3 +
 include/block/blockjob_int.h           |   2 +
 block/backup-top.c                     |   6 +-
 block/backup.c                         | 233 ++++++++++++-------
 block/block-copy.c                     | 227 +++++++++++++++---
 block/replication.c                    |   2 +
 blockdev.c                             |  14 ++
 blockjob.c                             |   6 +
 job.c                                  |   3 +
 scripts/simplebench/bench-backup.py    | 167 ++++++++++++++
 scripts/simplebench/bench-example.py   |   2 +-
 scripts/simplebench/bench_block_job.py |  13 +-
 tests/qemu-iotests/056                 |   9 +-
 tests/qemu-iotests/109.out             |  24 ++
 tests/qemu-iotests/185                 |   3 +-
 tests/qemu-iotests/185.out             |   3 +-
 tests/qemu-iotests/219                 |  13 +-
 tests/qemu-iotests/257                 |   1 +
 tests/qemu-iotests/257.out             | 306 ++++++++++++-------------
 22 files changed, 830 insertions(+), 297 deletions(-)
 create mode 100755 scripts/simplebench/bench-backup.py

-- 
2.29.2



             reply index

Thread overview: 45+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-01-16 21:46 Vladimir Sementsov-Ogievskiy [this message]
2021-01-16 21:46 ` [PATCH v4 01/23] qapi: backup: add perf.use-copy-range parameter Vladimir Sementsov-Ogievskiy
2021-01-16 21:46 ` [PATCH v4 02/23] block/block-copy: More explicit call_state Vladimir Sementsov-Ogievskiy
2021-01-16 21:46 ` [PATCH v4 03/23] block/block-copy: implement block_copy_async Vladimir Sementsov-Ogievskiy
2021-01-16 21:46 ` [PATCH v4 04/23] block/block-copy: add max_chunk and max_workers parameters Vladimir Sementsov-Ogievskiy
2021-01-16 21:46 ` [PATCH v4 05/23] block/block-copy: add list of all call-states Vladimir Sementsov-Ogievskiy
2021-01-16 21:46 ` [PATCH v4 06/23] block/block-copy: add ratelimit to block-copy Vladimir Sementsov-Ogievskiy
2021-01-16 21:46 ` [PATCH v4 07/23] block/block-copy: add block_copy_cancel Vladimir Sementsov-Ogievskiy
2021-01-16 21:46 ` [PATCH v4 08/23] blockjob: add set_speed to BlockJobDriver Vladimir Sementsov-Ogievskiy
2021-01-16 21:46 ` [PATCH v4 09/23] job: call job_enter from job_pause Vladimir Sementsov-Ogievskiy
2021-01-18 13:45   ` Max Reitz
2021-01-18 14:20     ` Max Reitz
2021-04-07 11:19   ` Max Reitz
2021-04-07 11:38     ` Vladimir Sementsov-Ogievskiy
2021-04-21  8:31       ` Vladimir Sementsov-Ogievskiy
2021-01-16 21:46 ` [PATCH v4 10/23] qapi: backup: add max-chunk and max-workers to x-perf struct Vladimir Sementsov-Ogievskiy
2021-01-16 21:46 ` [PATCH v4 11/23] iotests: 56: prepare for backup over block-copy Vladimir Sementsov-Ogievskiy
2021-01-16 21:46 ` [PATCH v4 12/23] iotests: 185: " Vladimir Sementsov-Ogievskiy
2021-01-16 21:46 ` [PATCH v4 13/23] iotests: 219: " Vladimir Sementsov-Ogievskiy
2021-01-16 21:46 ` [PATCH v4 14/23] iotests: 257: " Vladimir Sementsov-Ogievskiy
2021-01-16 21:46 ` [PATCH v4 15/23] block/block-copy: make progress_bytes_callback optional Vladimir Sementsov-Ogievskiy
2021-01-16 21:46 ` [PATCH v4 16/23] block/backup: drop extra gotos from backup_run() Vladimir Sementsov-Ogievskiy
2021-01-16 21:46 ` [PATCH v4 17/23] backup: move to block-copy Vladimir Sementsov-Ogievskiy
2021-01-16 21:47 ` [PATCH v4 18/23] qapi: backup: disable copy_range by default Vladimir Sementsov-Ogievskiy
2021-01-16 21:47 ` [PATCH v4 19/23] block/block-copy: drop unused block_copy_set_progress_callback() Vladimir Sementsov-Ogievskiy
2021-01-16 21:47 ` [PATCH v4 20/23] block/block-copy: drop unused argument of block_copy() Vladimir Sementsov-Ogievskiy
2021-01-16 21:47 ` [PATCH v4 21/23] simplebench/bench_block_job: use correct shebang line with python3 Vladimir Sementsov-Ogievskiy
2021-01-16 21:47 ` [PATCH v4 22/23] simplebench: bench_block_job: add cmd_options argument Vladimir Sementsov-Ogievskiy
2021-01-16 21:47 ` [PATCH v4 23/23] simplebench: add bench-backup.py Vladimir Sementsov-Ogievskiy
2021-01-18 14:01   ` Max Reitz
2021-01-18 15:07 ` [PATCH v4 00/23] backup performance: block_status + async Max Reitz
2021-01-18 17:04   ` Vladimir Sementsov-Ogievskiy
2021-01-19 18:40 ` Max Reitz
2021-01-19 19:22   ` Vladimir Sementsov-Ogievskiy
2021-01-19 19:29     ` Vladimir Sementsov-Ogievskiy
2021-01-20 10:39     ` Max Reitz
2021-01-20 13:50       ` Max Reitz
2021-01-20 14:34         ` Max Reitz
2021-01-20 14:44           ` Max Reitz
2021-01-20 15:53             ` Max Reitz
2021-01-20 16:00               ` Max Reitz
2021-01-20 16:04               ` Daniel P. Berrangé
2021-01-20 16:40                 ` Max Reitz
2021-01-20 10:20 ` [PATCH v4 11.5/23] iotests/129: Limit backup's max-chunk/max-workers Max Reitz
2021-01-20 11:24   ` Vladimir Sementsov-Ogievskiy

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210116214705.822267-1-vsementsov@virtuozzo.com \
    --to=vsementsov@virtuozzo.com \
    --cc=armbru@redhat.com \
    --cc=den@openvz.org \
    --cc=jsnow@redhat.com \
    --cc=kwolf@redhat.com \
    --cc=mreitz@redhat.com \
    --cc=qemu-block@nongnu.org \
    --cc=qemu-devel@nongnu.org \
    --cc=wencongyang2@huawei.com \
    --cc=xiechanglong.d@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

QEMU-Devel Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/qemu-devel/0 qemu-devel/git/0.git
	git clone --mirror https://lore.kernel.org/qemu-devel/1 qemu-devel/git/1.git
	git clone --mirror https://lore.kernel.org/qemu-devel/2 qemu-devel/git/2.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 qemu-devel qemu-devel/ https://lore.kernel.org/qemu-devel \
		qemu-devel@nongnu.org
	public-inbox-index qemu-devel

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.nongnu.qemu-devel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git