QEMU-Devel Archive on lore.kernel.org
 help / color / Atom feed
From: Peter Maydell <peter.maydell@linaro.org>
To: qemu-arm@nongnu.org, qemu-devel@nongnu.org
Subject: [PATCH 15/24] hw/arm/mps2-tz: Allow boards to have different PPCInfo data
Date: Fri,  5 Feb 2021 17:00:10 +0000
Message-ID: <20210205170019.25319-16-peter.maydell@linaro.org> (raw)
In-Reply-To: <20210205170019.25319-1-peter.maydell@linaro.org>

The AN505 and AN521 have the same device layout, but the AN524 is
somewhat different.  Allow for more than one PPCInfo array, which can
be selected based on the board type.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
We can't just put the arrays at file-scope and set up pointers
to them in the MPS2TZMachineClass struct, because the array
members include entries like "&mms->uart[0]" which is only valid
inside the mps2tz_common_init() function.
---
 hw/arm/mps2-tz.c | 16 ++++++++++++++--
 1 file changed, 14 insertions(+), 2 deletions(-)

diff --git a/hw/arm/mps2-tz.c b/hw/arm/mps2-tz.c
index 87993516816..721ac444920 100644
--- a/hw/arm/mps2-tz.c
+++ b/hw/arm/mps2-tz.c
@@ -423,6 +423,8 @@ static void mps2tz_common_init(MachineState *machine)
     MemoryRegion *system_memory = get_system_memory();
     DeviceState *iotkitdev;
     DeviceState *dev_splitter;
+    const PPCInfo *ppcs;
+    int num_ppcs;
     int i;
 
     if (strcmp(machine->cpu_type, mc->default_cpu_type) != 0) {
@@ -544,7 +546,7 @@ static void mps2tz_common_init(MachineState *machine)
      *  + wire up the PPC's control lines to the IoTKit object
      */
 
-    const PPCInfo ppcs[] = { {
+    const PPCInfo an505_ppcs[] = { {
             .name = "apb_ppcexp0",
             .ports = {
                 { "ssram-0", make_mpc, &mms->ssram_mpc[0], 0x58007000, 0x1000 },
@@ -598,7 +600,17 @@ static void mps2tz_common_init(MachineState *machine)
         },
     };
 
-    for (i = 0; i < ARRAY_SIZE(ppcs); i++) {
+    switch (mmc->fpga_type) {
+    case FPGA_AN505:
+    case FPGA_AN521:
+        ppcs = an505_ppcs;
+        num_ppcs = ARRAY_SIZE(an505_ppcs);
+        break;
+    default:
+        g_assert_not_reached();
+    }
+
+    for (i = 0; i < num_ppcs; i++) {
         const PPCInfo *ppcinfo = &ppcs[i];
         TZPPC *ppc = &mms->ppc[i];
         DeviceState *ppcdev;
-- 
2.20.1



  parent reply index

Thread overview: 51+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-02-05 16:59 [PATCH 00/24] hw/arm: New board model mps3-an524 Peter Maydell
2021-02-05 16:59 ` [PATCH 01/24] hw/arm/mps2-tz: Make SYSCLK frequency board-specific Peter Maydell
2021-02-05 18:13   ` Philippe Mathieu-Daudé
2021-02-05 16:59 ` [PATCH 02/24] hw/misc/mps2-scc: Support configurable number of OSCCLK values Peter Maydell
2021-02-12 18:11   ` Philippe Mathieu-Daudé
2021-02-05 16:59 ` [PATCH 03/24] hw/arm/mps2-tz: Correct the OSCCLK settings for mps2-an505 and mps2-an511 Peter Maydell
2021-02-12 18:12   ` Philippe Mathieu-Daudé
2021-02-05 16:59 ` [PATCH 04/24] hw/arm/mps2-tz: Make the OSCCLK settings be configurable per-board Peter Maydell
2021-02-12 18:12   ` Philippe Mathieu-Daudé
2021-02-05 17:00 ` [PATCH 05/24] hw/misc/mps2-fpgaio: Make number of LEDs configurable by board Peter Maydell
2021-02-12 18:19   ` Philippe Mathieu-Daudé
2021-02-05 17:00 ` [PATCH 06/24] hw/misc/mps2-fpgaio: Support SWITCH register Peter Maydell
2021-02-12 13:45   ` Peter Maydell
2021-02-12 13:51     ` Philippe Mathieu-Daudé
2021-02-12 14:03       ` Peter Maydell
2021-02-12 18:23   ` Philippe Mathieu-Daudé
2021-02-05 17:00 ` [PATCH 07/24] hw/arm/mps2-tz: Make FPGAIO switch and LED config per-board Peter Maydell
2021-02-12 13:51   ` Peter Maydell
2021-02-12 18:24     ` Philippe Mathieu-Daudé
2021-02-05 17:00 ` [PATCH 08/24] hw/arm/mps2-tz: Condition IRQ splitting on number of CPUs, not board type Peter Maydell
2021-02-12 18:25   ` Philippe Mathieu-Daudé
2021-02-05 17:00 ` [PATCH 09/24] hw/arm/mps2-tz: Make number of IRQs board-specific Peter Maydell
2021-02-12 18:26   ` Philippe Mathieu-Daudé
2021-02-05 17:00 ` [PATCH 10/24] hw/misc/mps2-scc: Implement CFG_REG5 and CFG_REG6 for MPS3 AN524 Peter Maydell
2021-02-05 17:00 ` [PATCH 11/24] hw/arm/mps2-tz: Correct wrong interrupt numbers for DMA and SPI Peter Maydell
2021-02-05 17:00 ` [PATCH 12/24] hw/arm/mps2-tz: Allow PPCPortInfo structures to specify device interrupts Peter Maydell
2021-02-05 17:00 ` [PATCH 13/24] hw/arm/mps2-tz: Move device IRQ info to data structures Peter Maydell
2021-02-05 17:00 ` [PATCH 14/24] hw/arm/mps2-tz: Size the uart-irq-orgate based on the number of UARTs Peter Maydell
2021-02-05 17:00 ` Peter Maydell [this message]
2021-02-05 17:00 ` [PATCH 16/24] hw/arm/mps2-tz: Make RAM arrangement board-specific Peter Maydell
2021-02-05 17:00 ` [PATCH 17/24] hw/arm/mps2-tz: Set MachineClass default_ram info from RAMInfo data Peter Maydell
2021-02-05 17:00 ` [PATCH 18/24] hw/arm/mps2-tz: Support ROMs as well as RAMs Peter Maydell
2021-02-05 17:00 ` [PATCH 19/24] hw/arm/mps2-tz: Get armv7m_load_kernel() size argument from RAMInfo Peter Maydell
2021-02-12 18:30   ` Philippe Mathieu-Daudé
2021-02-05 17:00 ` [PATCH 20/24] hw/arm/mps2-tz: Add new mps3-an524 board Peter Maydell
2021-02-12 11:19   ` Peter Maydell
2021-02-12 14:51   ` Peter Maydell
2021-02-05 17:00 ` [PATCH 21/24] hw/arm/mps2-tz: Stub out USB controller for mps3-an524 Peter Maydell
2021-02-12 18:34   ` Philippe Mathieu-Daudé
2021-02-05 17:00 ` [PATCH 22/24] hw/arm/mps2-tz: Provide PL031 RTC on mps3-an524 Peter Maydell
2021-02-12 18:35   ` Philippe Mathieu-Daudé
2021-02-05 17:00 ` [PATCH 23/24] docs/system/arm/mps2.rst: Document the new mps3-an524 board Peter Maydell
2021-02-12 18:36   ` Philippe Mathieu-Daudé
2021-02-05 17:00 ` [PATCH 24/24] hw/arm/mps2: Update old infocenter.arm.com URLs Peter Maydell
2021-02-12 18:37   ` Philippe Mathieu-Daudé
2021-02-05 18:05 ` [PATCH 00/24] hw/arm: New board model mps3-an524 Philippe Mathieu-Daudé
2021-02-05 19:20   ` Peter Maydell
2021-02-05 19:31     ` Philippe Mathieu-Daudé
2021-02-05 19:34       ` Peter Maydell
2021-02-12 18:38         ` Philippe Mathieu-Daudé
2021-02-05 18:27 ` no-reply

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210205170019.25319-16-peter.maydell@linaro.org \
    --to=peter.maydell@linaro.org \
    --cc=qemu-arm@nongnu.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

QEMU-Devel Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/qemu-devel/0 qemu-devel/git/0.git
	git clone --mirror https://lore.kernel.org/qemu-devel/1 qemu-devel/git/1.git
	git clone --mirror https://lore.kernel.org/qemu-devel/2 qemu-devel/git/2.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 qemu-devel qemu-devel/ https://lore.kernel.org/qemu-devel \
		qemu-devel@nongnu.org
	public-inbox-index qemu-devel

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.nongnu.qemu-devel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git