QEMU-Devel Archive on lore.kernel.org
 help / color / Atom feed
From: Peter Maydell <peter.maydell@linaro.org>
To: qemu-arm@nongnu.org, qemu-devel@nongnu.org
Subject: [PATCH 18/24] hw/arm/mps2-tz: Support ROMs as well as RAMs
Date: Fri,  5 Feb 2021 17:00:13 +0000
Message-ID: <20210205170019.25319-19-peter.maydell@linaro.org> (raw)
In-Reply-To: <20210205170019.25319-1-peter.maydell@linaro.org>

The AN505 and AN521 don't have any read-only memory, but the AN524
does; add a flag to ROMInfo to mark a region as ROM.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/arm/mps2-tz.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/hw/arm/mps2-tz.c b/hw/arm/mps2-tz.c
index b46b32746e0..ce5e804c734 100644
--- a/hw/arm/mps2-tz.c
+++ b/hw/arm/mps2-tz.c
@@ -92,8 +92,10 @@ typedef struct RAMInfo {
  * Flag values:
  *  IS_ALIAS: this RAM area is an alias to the upstream end of the
  *    MPC specified by its .mpc value
+ *  IS_ROM: this RAM area is read-only
  */
 #define IS_ALIAS 1
+#define IS_ROM 2
 
 struct MPS2TZMachineClass {
     MachineClass parent;
@@ -209,6 +211,7 @@ static MemoryRegion *mr_for_raminfo(MPS2TZMachineState *mms,
     if (raminfo->mrindex < 0) {
         /* Means this RAMInfo is for QEMU's "system memory" */
         MachineState *machine = MACHINE(mms);
+        assert(!(raminfo->flags & IS_ROM));
         return machine->ram;
     }
 
@@ -217,6 +220,9 @@ static MemoryRegion *mr_for_raminfo(MPS2TZMachineState *mms,
 
     memory_region_init_ram(ram, NULL, raminfo->name,
                            raminfo->size, &error_fatal);
+    if (raminfo->flags & IS_ROM) {
+        memory_region_set_readonly(ram, true);
+    }
     return ram;
 }
 
-- 
2.20.1



  parent reply index

Thread overview: 51+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-02-05 16:59 [PATCH 00/24] hw/arm: New board model mps3-an524 Peter Maydell
2021-02-05 16:59 ` [PATCH 01/24] hw/arm/mps2-tz: Make SYSCLK frequency board-specific Peter Maydell
2021-02-05 18:13   ` Philippe Mathieu-Daudé
2021-02-05 16:59 ` [PATCH 02/24] hw/misc/mps2-scc: Support configurable number of OSCCLK values Peter Maydell
2021-02-12 18:11   ` Philippe Mathieu-Daudé
2021-02-05 16:59 ` [PATCH 03/24] hw/arm/mps2-tz: Correct the OSCCLK settings for mps2-an505 and mps2-an511 Peter Maydell
2021-02-12 18:12   ` Philippe Mathieu-Daudé
2021-02-05 16:59 ` [PATCH 04/24] hw/arm/mps2-tz: Make the OSCCLK settings be configurable per-board Peter Maydell
2021-02-12 18:12   ` Philippe Mathieu-Daudé
2021-02-05 17:00 ` [PATCH 05/24] hw/misc/mps2-fpgaio: Make number of LEDs configurable by board Peter Maydell
2021-02-12 18:19   ` Philippe Mathieu-Daudé
2021-02-05 17:00 ` [PATCH 06/24] hw/misc/mps2-fpgaio: Support SWITCH register Peter Maydell
2021-02-12 13:45   ` Peter Maydell
2021-02-12 13:51     ` Philippe Mathieu-Daudé
2021-02-12 14:03       ` Peter Maydell
2021-02-12 18:23   ` Philippe Mathieu-Daudé
2021-02-05 17:00 ` [PATCH 07/24] hw/arm/mps2-tz: Make FPGAIO switch and LED config per-board Peter Maydell
2021-02-12 13:51   ` Peter Maydell
2021-02-12 18:24     ` Philippe Mathieu-Daudé
2021-02-05 17:00 ` [PATCH 08/24] hw/arm/mps2-tz: Condition IRQ splitting on number of CPUs, not board type Peter Maydell
2021-02-12 18:25   ` Philippe Mathieu-Daudé
2021-02-05 17:00 ` [PATCH 09/24] hw/arm/mps2-tz: Make number of IRQs board-specific Peter Maydell
2021-02-12 18:26   ` Philippe Mathieu-Daudé
2021-02-05 17:00 ` [PATCH 10/24] hw/misc/mps2-scc: Implement CFG_REG5 and CFG_REG6 for MPS3 AN524 Peter Maydell
2021-02-05 17:00 ` [PATCH 11/24] hw/arm/mps2-tz: Correct wrong interrupt numbers for DMA and SPI Peter Maydell
2021-02-05 17:00 ` [PATCH 12/24] hw/arm/mps2-tz: Allow PPCPortInfo structures to specify device interrupts Peter Maydell
2021-02-05 17:00 ` [PATCH 13/24] hw/arm/mps2-tz: Move device IRQ info to data structures Peter Maydell
2021-02-05 17:00 ` [PATCH 14/24] hw/arm/mps2-tz: Size the uart-irq-orgate based on the number of UARTs Peter Maydell
2021-02-05 17:00 ` [PATCH 15/24] hw/arm/mps2-tz: Allow boards to have different PPCInfo data Peter Maydell
2021-02-05 17:00 ` [PATCH 16/24] hw/arm/mps2-tz: Make RAM arrangement board-specific Peter Maydell
2021-02-05 17:00 ` [PATCH 17/24] hw/arm/mps2-tz: Set MachineClass default_ram info from RAMInfo data Peter Maydell
2021-02-05 17:00 ` Peter Maydell [this message]
2021-02-05 17:00 ` [PATCH 19/24] hw/arm/mps2-tz: Get armv7m_load_kernel() size argument from RAMInfo Peter Maydell
2021-02-12 18:30   ` Philippe Mathieu-Daudé
2021-02-05 17:00 ` [PATCH 20/24] hw/arm/mps2-tz: Add new mps3-an524 board Peter Maydell
2021-02-12 11:19   ` Peter Maydell
2021-02-12 14:51   ` Peter Maydell
2021-02-05 17:00 ` [PATCH 21/24] hw/arm/mps2-tz: Stub out USB controller for mps3-an524 Peter Maydell
2021-02-12 18:34   ` Philippe Mathieu-Daudé
2021-02-05 17:00 ` [PATCH 22/24] hw/arm/mps2-tz: Provide PL031 RTC on mps3-an524 Peter Maydell
2021-02-12 18:35   ` Philippe Mathieu-Daudé
2021-02-05 17:00 ` [PATCH 23/24] docs/system/arm/mps2.rst: Document the new mps3-an524 board Peter Maydell
2021-02-12 18:36   ` Philippe Mathieu-Daudé
2021-02-05 17:00 ` [PATCH 24/24] hw/arm/mps2: Update old infocenter.arm.com URLs Peter Maydell
2021-02-12 18:37   ` Philippe Mathieu-Daudé
2021-02-05 18:05 ` [PATCH 00/24] hw/arm: New board model mps3-an524 Philippe Mathieu-Daudé
2021-02-05 19:20   ` Peter Maydell
2021-02-05 19:31     ` Philippe Mathieu-Daudé
2021-02-05 19:34       ` Peter Maydell
2021-02-12 18:38         ` Philippe Mathieu-Daudé
2021-02-05 18:27 ` no-reply

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210205170019.25319-19-peter.maydell@linaro.org \
    --to=peter.maydell@linaro.org \
    --cc=qemu-arm@nongnu.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

QEMU-Devel Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/qemu-devel/0 qemu-devel/git/0.git
	git clone --mirror https://lore.kernel.org/qemu-devel/1 qemu-devel/git/1.git
	git clone --mirror https://lore.kernel.org/qemu-devel/2 qemu-devel/git/2.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 qemu-devel qemu-devel/ https://lore.kernel.org/qemu-devel \
		qemu-devel@nongnu.org
	public-inbox-index qemu-devel

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.nongnu.qemu-devel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git