qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
To: qemu-devel@nongnu.org, pbonzini@redhat.com, fam@euphon.net,
	laurent@vivier.eu
Subject: [PATCH v3 42/42] esp: add support for unaligned accesses
Date: Thu,  4 Mar 2021 22:11:03 +0000	[thread overview]
Message-ID: <20210304221103.6369-43-mark.cave-ayland@ilande.co.uk> (raw)
In-Reply-To: <20210304221103.6369-1-mark.cave-ayland@ilande.co.uk>

When the MacOS toolbox ROM transfers data from a target device to an unaligned
memory address, the first/last byte of a 16-bit transfer needs to be handled
separately. This means that the first byte is preloaded into the FIFO before
the transfer, or the last byte remains in the FIFO after the transfer.

The result of this is that the PDMA routines must be updated so that the FIFO
is loaded/unloaded if the last 16-bit word is used (rather than the last byte)
and any remaining byte from a FIFO wraparound is handled correctly.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
---
 hw/scsi/esp.c | 48 +++++++++++++++++++++++++++++++++++++++++-------
 1 file changed, 41 insertions(+), 7 deletions(-)

diff --git a/hw/scsi/esp.c b/hw/scsi/esp.c
index f828e70865..507ab363bc 100644
--- a/hw/scsi/esp.c
+++ b/hw/scsi/esp.c
@@ -498,11 +498,22 @@ static void do_dma_pdma_cb(ESPState *s)
 
     if (to_device) {
         /* Copy FIFO data to device */
-        len = MIN(fifo8_num_used(&s->fifo), ESP_FIFO_SZ);
+        len = MIN(s->async_len, ESP_FIFO_SZ);
+        len = MIN(len, fifo8_num_used(&s->fifo));
         memcpy(s->async_buf, fifo8_pop_buf(&s->fifo, len, &n), len);
-        s->async_buf += len;
-        s->async_len -= len;
-        s->ti_size += len;
+        s->async_buf += n;
+        s->async_len -= n;
+        s->ti_size += n;
+
+        if (n < len) {
+            /* Unaligned accesses can cause FIFO wraparound */
+            len = len - n;
+            memcpy(s->async_buf, fifo8_pop_buf(&s->fifo, len, &n), len);
+            s->async_buf += n;
+            s->async_len -= n;
+            s->ti_size += n;
+        }
+
         if (s->async_len == 0) {
             scsi_req_continue(s->current_req);
             return;
@@ -526,12 +537,18 @@ static void do_dma_pdma_cb(ESPState *s)
 
         if (esp_get_tc(s) != 0) {
             /* Copy device data to FIFO */
-            len = MIN(s->async_len, fifo8_num_free(&s->fifo));
+            len = MIN(s->async_len, esp_get_tc(s));
+            len = MIN(len, fifo8_num_free(&s->fifo));
             fifo8_push_all(&s->fifo, s->async_buf, len);
             s->async_buf += len;
             s->async_len -= len;
             s->ti_size -= len;
             esp_set_tc(s, esp_get_tc(s) - len);
+
+            if (esp_get_tc(s) == 0) {
+                /* Indicate transfer to FIFO is complete */
+                 s->rregs[ESP_RSTAT] |= STAT_TC;
+            }
             return;
         }
 
@@ -606,12 +623,29 @@ static void esp_do_dma(ESPState *s)
         if (s->dma_memory_write) {
             s->dma_memory_write(s->dma_opaque, s->async_buf, len);
         } else {
+            /* Adjust TC for any leftover data in the FIFO */
+            if (!fifo8_is_empty(&s->fifo)) {
+                esp_set_tc(s, esp_get_tc(s) - fifo8_num_used(&s->fifo));
+            }
+
             /* Copy device data to FIFO */
             len = MIN(len, fifo8_num_free(&s->fifo));
             fifo8_push_all(&s->fifo, s->async_buf, len);
             s->async_buf += len;
             s->async_len -= len;
             s->ti_size -= len;
+
+            /*
+             * MacOS toolbox uses a TI length of 16 bytes for all commands, so
+             * commands shorter than this must be padded accordingly
+             */
+            if (len < esp_get_tc(s) && esp_get_tc(s) <= ESP_FIFO_SZ) {
+                while (fifo8_num_used(&s->fifo) < ESP_FIFO_SZ) {
+                    esp_fifo_push(s, 0);
+                    len++;
+                }
+            }
+
             esp_set_tc(s, esp_get_tc(s) - len);
             s->pdma_cb = do_dma_pdma_cb;
             esp_raise_drq(s);
@@ -1160,7 +1194,7 @@ static void sysbus_esp_pdma_write(void *opaque, hwaddr addr,
         break;
     }
     dmalen = esp_get_tc(s);
-    if (dmalen == 0 || fifo8_is_full(&s->fifo)) {
+    if (dmalen == 0 || fifo8_num_free(&s->fifo) < 2) {
         s->pdma_cb(s);
     }
 }
@@ -1183,7 +1217,7 @@ static uint64_t sysbus_esp_pdma_read(void *opaque, hwaddr addr,
         val = (val << 8) | esp_pdma_read(s);
         break;
     }
-    if (fifo8_is_empty(&s->fifo)) {
+    if (fifo8_num_used(&s->fifo) < 2) {
         s->pdma_cb(s);
     }
     return val;
-- 
2.20.1



  parent reply	other threads:[~2021-03-04 22:30 UTC|newest]

Thread overview: 45+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-03-04 22:10 [PATCH v3 00/42] esp: consolidate PDMA transfer buffers and other fixes Mark Cave-Ayland
2021-03-04 22:10 ` [PATCH v3 01/42] esp: checkpatch fixes Mark Cave-Ayland
2021-03-04 22:10 ` [PATCH v3 02/42] esp: rename existing ESP QOM type to SYSBUS_ESP Mark Cave-Ayland
2021-03-04 22:10 ` [PATCH v3 03/42] esp: QOMify the internal ESP device state Mark Cave-Ayland
2021-03-04 22:10 ` [PATCH v3 04/42] esp: add vmstate_esp version to embedded ESPState Mark Cave-Ayland
2021-03-04 22:10 ` [PATCH v3 05/42] esp: add trace event when receiving a TI command Mark Cave-Ayland
2021-03-04 22:10 ` [PATCH v3 06/42] esp: fix esp_reg_read() trace event Mark Cave-Ayland
2021-03-04 22:10 ` [PATCH v3 07/42] esp: add PDMA trace events Mark Cave-Ayland
2021-03-04 22:10 ` [PATCH v3 08/42] esp: determine transfer direction directly from SCSI phase Mark Cave-Ayland
2021-03-04 22:10 ` [PATCH v3 09/42] esp: introduce esp_get_tc() and esp_set_tc() Mark Cave-Ayland
2021-03-04 22:10 ` [PATCH v3 10/42] esp: introduce esp_get_stc() Mark Cave-Ayland
2021-03-04 22:10 ` [PATCH v3 11/42] esp: apply transfer length adjustment when STC is zero at TC load time Mark Cave-Ayland
2021-03-04 22:10 ` [PATCH v3 12/42] esp: remove dma_counter from ESPState Mark Cave-Ayland
2021-03-04 22:10 ` [PATCH v3 13/42] esp: remove dma_left " Mark Cave-Ayland
2021-03-04 22:10 ` [PATCH v3 14/42] esp: remove minlen restriction in handle_ti Mark Cave-Ayland
2021-03-04 22:10 ` [PATCH v3 15/42] esp: introduce esp_pdma_read() and esp_pdma_write() functions Mark Cave-Ayland
2021-03-04 22:10 ` [PATCH v3 16/42] esp: use pdma_origin directly in esp_pdma_read()/esp_pdma_write() Mark Cave-Ayland
2021-03-04 22:10 ` [PATCH v3 17/42] esp: move pdma_len and TC logic into esp_pdma_read()/esp_pdma_write() Mark Cave-Ayland
2021-03-04 22:10 ` [PATCH v3 18/42] esp: accumulate SCSI commands for PDMA transfers in cmdbuf instead of pdma_buf Mark Cave-Ayland
2021-03-04 22:10 ` [PATCH v3 19/42] esp: remove buf parameter from do_cmd() Mark Cave-Ayland
2021-03-04 22:10 ` [PATCH v3 20/42] esp: remove the buf and buflen parameters from get_cmd() Mark Cave-Ayland
2021-03-04 22:10 ` [PATCH v3 21/42] esp: remove redundant pdma_start from ESPState Mark Cave-Ayland
2021-03-04 22:10 ` [PATCH v3 22/42] esp: move PDMA length adjustments into esp_pdma_read()/esp_pdma_write() Mark Cave-Ayland
2021-03-04 22:10 ` [PATCH v3 23/42] esp: use ti_wptr/ti_rptr to manage the current FIFO position for PDMA Mark Cave-Ayland
2021-03-04 22:10 ` [PATCH v3 24/42] esp: use in-built TC to determine PDMA transfer length Mark Cave-Ayland
2021-03-04 22:10 ` [PATCH v3 25/42] esp: remove CMD pdma_origin Mark Cave-Ayland
2021-03-04 22:10 ` [PATCH v3 26/42] esp: rename get_cmd_cb() to esp_select() Mark Cave-Ayland
2021-03-04 22:10 ` [PATCH v3 27/42] esp: fix PDMA target selection Mark Cave-Ayland
2021-03-04 22:10 ` [PATCH v3 28/42] esp: use FIFO for PDMA transfers between initiator and device Mark Cave-Ayland
2021-03-04 22:10 ` [PATCH v3 29/42] esp: remove pdma_origin from ESPState Mark Cave-Ayland
2021-03-04 22:10 ` [PATCH v3 30/42] esp: add 4 byte PDMA read and write transfers Mark Cave-Ayland
2021-03-04 22:10 ` [PATCH v3 31/42] esp: implement FIFO flush command Mark Cave-Ayland
2021-03-04 22:10 ` [PATCH v3 32/42] esp: latch individual bits in ESP_RINTR register Mark Cave-Ayland
2021-03-04 22:10 ` [PATCH v3 33/42] esp: defer command completion interrupt on incoming data transfers Mark Cave-Ayland
2021-03-04 22:10 ` [PATCH v3 34/42] esp: remove old deferred command completion mechanism Mark Cave-Ayland
2021-03-04 22:10 ` [PATCH v3 35/42] esp: raise interrupt after every non-DMA byte transferred to the FIFO Mark Cave-Ayland
2021-03-04 22:10 ` [PATCH v3 36/42] esp: add maxlen parameter to get_cmd() Mark Cave-Ayland
2021-03-04 22:10 ` [PATCH v3 37/42] esp: transition to message out phase after SATN and stop command Mark Cave-Ayland
2021-03-04 22:10 ` [PATCH v3 38/42] esp: convert ti_buf from array to Fifo8 Mark Cave-Ayland
2021-03-04 22:11 ` [PATCH v3 39/42] esp: convert cmdbuf " Mark Cave-Ayland
2021-03-04 22:11 ` [PATCH v3 40/42] esp: add trivial implementation of the ESP_RFLAGS register Mark Cave-Ayland
2021-03-04 22:11 ` [PATCH v3 41/42] esp: implement non-DMA transfers in PDMA mode Mark Cave-Ayland
2021-03-04 22:11 ` Mark Cave-Ayland [this message]
2021-03-04 22:58 ` [PATCH v3 00/42] esp: consolidate PDMA transfer buffers and other fixes Philippe Mathieu-Daudé
2021-03-05  7:31   ` Mark Cave-Ayland

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210304221103.6369-43-mark.cave-ayland@ilande.co.uk \
    --to=mark.cave-ayland@ilande.co.uk \
    --cc=fam@euphon.net \
    --cc=laurent@vivier.eu \
    --cc=pbonzini@redhat.com \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).