* [PATCH v5 0/7] eBPF RSS support for virtio-net
@ 2021-03-25 15:35 Andrew Melnychenko
2021-03-25 15:35 ` [PATCH v5 1/7] net/tap: Added TUNSETSTEERINGEBPF code Andrew Melnychenko
` (9 more replies)
0 siblings, 10 replies; 15+ messages in thread
From: Andrew Melnychenko @ 2021-03-25 15:35 UTC (permalink / raw)
To: jasowang, mst; +Cc: yan, yuri.benditovich, berrange, qemu-devel
This set of patches introduces the usage of eBPF for packet steering
and RSS hash calculation:
* RSS(Receive Side Scaling) is used to distribute network packets to
guest virtqueues by calculating packet hash
* Additionally adding support for the usage of RSS with vhost
The eBPF works on kernels 5.8+
On earlier kerneld it fails to load and the RSS feature is reported
only without vhost and implemented in 'in-qemu' software.
Implementation notes:
Linux TAP TUNSETSTEERINGEBPF ioctl was used to set the eBPF program.
Added libbpf dependency and eBPF support.
The eBPF program is part of the qemu and presented as an array
of BPF ELF file data. The eBPF array file initially generated by bpftool.
The compilation of eBPF is not part of QEMU build and can be done
using provided Makefile.ebpf.
Added changes to virtio-net and vhost, primary eBPF RSS is used.
'in-qemu' RSS used in the case of hash population and as a fallback option.
For vhost, the hash population feature is not reported to the guest.
Please also see the documentation in PATCH 6/7.
Known issues:
* hash population not supported by eBPF RSS: 'in-qemu' RSS used
as a fallback, also, hash population feature is not reported to guests
with vhost.
* IPv6 extensions still in progress.
Changes since v1:
* using libbpf instead of direct 'bpf' system call.
* added libbpf dependency to the configure/meson scripts.
* changed python script for eBPF .h file generation.
* changed eBPF program - reading L3 proto from ethernet frame.
* added TUNSETSTEERINGEBPF define for TUN.
* changed the maintainer's info.
* added license headers.
* refactored code.
Changes since v2:
* using bpftool for eBPF skeleton generation.
* ebpf_rss is refactored to use skeleton generated by bpftool.
* added/adjasted license in comment sections and in eBPF file.
* rss.bpf.c and Makefile.ebpf moved to the tool/ebpf folder.
* virtio-net eBPF rss refactored. Now eBPF initialized during realize().
Changes since v3:
* rebased to last master.
* fixed issue with failed build without libbpf.
* fixed ebpf loading without rss option.
* refactored labels in ebpf_rss.c
Changes since v4:
* refactored configure/meson script.
* added checks for load_bytes in ebpf.
* documentation added to the index.
* refactored Makefile and rss.bpf.c.
* rebased to last master.
Andrew (7):
net/tap: Added TUNSETSTEERINGEBPF code.
net: Added SetSteeringEBPF method for NetClientState.
ebpf: Added eBPF RSS program.
ebpf: Added eBPF RSS loader.
virtio-net: Added eBPF RSS to virtio-net.
docs: Added eBPF documentation.
MAINTAINERS: Added eBPF maintainers information.
MAINTAINERS | 8 +
configure | 8 +-
docs/devel/ebpf_rss.rst | 125 ++++++++
docs/devel/index.rst | 1 +
ebpf/ebpf_rss-stub.c | 40 +++
ebpf/ebpf_rss.c | 165 ++++++++++
ebpf/ebpf_rss.h | 44 +++
ebpf/meson.build | 1 +
ebpf/rss.bpf.skeleton.h | 423 +++++++++++++++++++++++++
ebpf/trace-events | 4 +
ebpf/trace.h | 2 +
hw/net/vhost_net.c | 3 +
hw/net/virtio-net.c | 115 ++++++-
include/hw/virtio/virtio-net.h | 4 +
include/net/net.h | 2 +
meson.build | 9 +
meson_options.txt | 2 +
net/tap-bsd.c | 5 +
net/tap-linux.c | 13 +
net/tap-linux.h | 1 +
net/tap-solaris.c | 5 +
net/tap-stub.c | 5 +
net/tap.c | 9 +
net/tap_int.h | 1 +
net/vhost-vdpa.c | 2 +
tools/ebpf/Makefile.ebpf | 22 ++
tools/ebpf/rss.bpf.c | 552 +++++++++++++++++++++++++++++++++
27 files changed, 1567 insertions(+), 4 deletions(-)
create mode 100644 docs/devel/ebpf_rss.rst
create mode 100644 ebpf/ebpf_rss-stub.c
create mode 100644 ebpf/ebpf_rss.c
create mode 100644 ebpf/ebpf_rss.h
create mode 100644 ebpf/meson.build
create mode 100644 ebpf/rss.bpf.skeleton.h
create mode 100644 ebpf/trace-events
create mode 100644 ebpf/trace.h
create mode 100755 tools/ebpf/Makefile.ebpf
create mode 100644 tools/ebpf/rss.bpf.c
--
2.31.0
^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCH v5 1/7] net/tap: Added TUNSETSTEERINGEBPF code.
2021-03-25 15:35 [PATCH v5 0/7] eBPF RSS support for virtio-net Andrew Melnychenko
@ 2021-03-25 15:35 ` Andrew Melnychenko
2021-03-25 15:35 ` [PATCH v5 2/7] net: Added SetSteeringEBPF method for NetClientState Andrew Melnychenko
` (8 subsequent siblings)
9 siblings, 0 replies; 15+ messages in thread
From: Andrew Melnychenko @ 2021-03-25 15:35 UTC (permalink / raw)
To: jasowang, mst; +Cc: yan, yuri.benditovich, berrange, qemu-devel
From: Andrew <andrew@daynix.com>
Additional code that will be used for eBPF setting steering routine.
Signed-off-by: Andrew Melnychenko <andrew@daynix.com>
---
net/tap-linux.h | 1 +
1 file changed, 1 insertion(+)
diff --git a/net/tap-linux.h b/net/tap-linux.h
index 2f36d100fc..1d06fe0de6 100644
--- a/net/tap-linux.h
+++ b/net/tap-linux.h
@@ -31,6 +31,7 @@
#define TUNSETQUEUE _IOW('T', 217, int)
#define TUNSETVNETLE _IOW('T', 220, int)
#define TUNSETVNETBE _IOW('T', 222, int)
+#define TUNSETSTEERINGEBPF _IOR('T', 224, int)
#endif
--
2.31.0
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH v5 2/7] net: Added SetSteeringEBPF method for NetClientState.
2021-03-25 15:35 [PATCH v5 0/7] eBPF RSS support for virtio-net Andrew Melnychenko
2021-03-25 15:35 ` [PATCH v5 1/7] net/tap: Added TUNSETSTEERINGEBPF code Andrew Melnychenko
@ 2021-03-25 15:35 ` Andrew Melnychenko
2021-03-25 15:35 ` [PATCH v5 3/7] ebpf: Added eBPF RSS program Andrew Melnychenko
` (7 subsequent siblings)
9 siblings, 0 replies; 15+ messages in thread
From: Andrew Melnychenko @ 2021-03-25 15:35 UTC (permalink / raw)
To: jasowang, mst; +Cc: yan, yuri.benditovich, berrange, qemu-devel
From: Andrew <andrew@daynix.com>
For now, that method supported only by Linux TAP.
Linux TAP uses TUNSETSTEERINGEBPF ioctl.
Signed-off-by: Andrew Melnychenko <andrew@daynix.com>
---
include/net/net.h | 2 ++
net/tap-bsd.c | 5 +++++
net/tap-linux.c | 13 +++++++++++++
net/tap-solaris.c | 5 +++++
net/tap-stub.c | 5 +++++
net/tap.c | 9 +++++++++
net/tap_int.h | 1 +
7 files changed, 40 insertions(+)
diff --git a/include/net/net.h b/include/net/net.h
index a02949f6db..fc617b2f8c 100644
--- a/include/net/net.h
+++ b/include/net/net.h
@@ -63,6 +63,7 @@ typedef int (SetVnetBE)(NetClientState *, bool);
typedef struct SocketReadState SocketReadState;
typedef void (SocketReadStateFinalize)(SocketReadState *rs);
typedef void (NetAnnounce)(NetClientState *);
+typedef bool (SetSteeringEBPF)(NetClientState *, int);
typedef struct NetClientInfo {
NetClientDriver type;
@@ -84,6 +85,7 @@ typedef struct NetClientInfo {
SetVnetLE *set_vnet_le;
SetVnetBE *set_vnet_be;
NetAnnounce *announce;
+ SetSteeringEBPF *set_steering_ebpf;
} NetClientInfo;
struct NetClientState {
diff --git a/net/tap-bsd.c b/net/tap-bsd.c
index 77aaf674b1..4f64f31e98 100644
--- a/net/tap-bsd.c
+++ b/net/tap-bsd.c
@@ -259,3 +259,8 @@ int tap_fd_get_ifname(int fd, char *ifname)
{
return -1;
}
+
+int tap_fd_set_steering_ebpf(int fd, int prog_fd)
+{
+ return -1;
+}
diff --git a/net/tap-linux.c b/net/tap-linux.c
index b0635e9e32..9584769740 100644
--- a/net/tap-linux.c
+++ b/net/tap-linux.c
@@ -316,3 +316,16 @@ int tap_fd_get_ifname(int fd, char *ifname)
pstrcpy(ifname, sizeof(ifr.ifr_name), ifr.ifr_name);
return 0;
}
+
+int tap_fd_set_steering_ebpf(int fd, int prog_fd)
+{
+ if (ioctl(fd, TUNSETSTEERINGEBPF, (void *) &prog_fd) != 0) {
+ error_report("Issue while setting TUNSETSTEERINGEBPF:"
+ " %s with fd: %d, prog_fd: %d",
+ strerror(errno), fd, prog_fd);
+
+ return -1;
+ }
+
+ return 0;
+}
diff --git a/net/tap-solaris.c b/net/tap-solaris.c
index 0475a58207..d85224242b 100644
--- a/net/tap-solaris.c
+++ b/net/tap-solaris.c
@@ -255,3 +255,8 @@ int tap_fd_get_ifname(int fd, char *ifname)
{
return -1;
}
+
+int tap_fd_set_steering_ebpf(int fd, int prog_fd)
+{
+ return -1;
+}
diff --git a/net/tap-stub.c b/net/tap-stub.c
index de525a2e69..a0fa25804b 100644
--- a/net/tap-stub.c
+++ b/net/tap-stub.c
@@ -85,3 +85,8 @@ int tap_fd_get_ifname(int fd, char *ifname)
{
return -1;
}
+
+int tap_fd_set_steering_ebpf(int fd, int prog_fd)
+{
+ return -1;
+}
diff --git a/net/tap.c b/net/tap.c
index 12a08d54fe..ea65ed9e19 100644
--- a/net/tap.c
+++ b/net/tap.c
@@ -337,6 +337,14 @@ static void tap_poll(NetClientState *nc, bool enable)
tap_write_poll(s, enable);
}
+static bool tap_set_steering_ebpf(NetClientState *nc, int prog_fd)
+{
+ TAPState *s = DO_UPCAST(TAPState, nc, nc);
+ assert(nc->info->type == NET_CLIENT_DRIVER_TAP);
+
+ return tap_fd_set_steering_ebpf(s->fd, prog_fd) == 0;
+}
+
int tap_get_fd(NetClientState *nc)
{
TAPState *s = DO_UPCAST(TAPState, nc, nc);
@@ -362,6 +370,7 @@ static NetClientInfo net_tap_info = {
.set_vnet_hdr_len = tap_set_vnet_hdr_len,
.set_vnet_le = tap_set_vnet_le,
.set_vnet_be = tap_set_vnet_be,
+ .set_steering_ebpf = tap_set_steering_ebpf,
};
static TAPState *net_tap_fd_init(NetClientState *peer,
diff --git a/net/tap_int.h b/net/tap_int.h
index 225a49ea48..547f8a5a28 100644
--- a/net/tap_int.h
+++ b/net/tap_int.h
@@ -44,5 +44,6 @@ int tap_fd_set_vnet_be(int fd, int vnet_is_be);
int tap_fd_enable(int fd);
int tap_fd_disable(int fd);
int tap_fd_get_ifname(int fd, char *ifname);
+int tap_fd_set_steering_ebpf(int fd, int prog_fd);
#endif /* NET_TAP_INT_H */
--
2.31.0
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH v5 3/7] ebpf: Added eBPF RSS program.
2021-03-25 15:35 [PATCH v5 0/7] eBPF RSS support for virtio-net Andrew Melnychenko
2021-03-25 15:35 ` [PATCH v5 1/7] net/tap: Added TUNSETSTEERINGEBPF code Andrew Melnychenko
2021-03-25 15:35 ` [PATCH v5 2/7] net: Added SetSteeringEBPF method for NetClientState Andrew Melnychenko
@ 2021-03-25 15:35 ` Andrew Melnychenko
2021-03-25 15:35 ` [PATCH v5 4/7] ebpf: Added eBPF RSS loader Andrew Melnychenko
` (6 subsequent siblings)
9 siblings, 0 replies; 15+ messages in thread
From: Andrew Melnychenko @ 2021-03-25 15:35 UTC (permalink / raw)
To: jasowang, mst; +Cc: yan, yuri.benditovich, berrange, qemu-devel
From: Andrew <andrew@daynix.com>
RSS program and Makefile to build it.
The bpftool used to generate '.h' file.
The data in that file may be loaded by libbpf.
EBPF compilation is not required for building qemu.
You can use Makefile if you need to regenerate rss.bpf.skeleton.h.
Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com>
Signed-off-by: Andrew Melnychenko <andrew@daynix.com>
---
tools/ebpf/Makefile.ebpf | 22 ++
tools/ebpf/rss.bpf.c | 552 +++++++++++++++++++++++++++++++++++++++
2 files changed, 574 insertions(+)
create mode 100755 tools/ebpf/Makefile.ebpf
create mode 100644 tools/ebpf/rss.bpf.c
diff --git a/tools/ebpf/Makefile.ebpf b/tools/ebpf/Makefile.ebpf
new file mode 100755
index 0000000000..45b5551fc7
--- /dev/null
+++ b/tools/ebpf/Makefile.ebpf
@@ -0,0 +1,22 @@
+OBJS = rss.bpf.o
+
+LLC ?= llc
+CLANG ?= clang
+INC_FLAGS = `$(CLANG) -print-file-name=include`
+EXTRA_CFLAGS ?= -O2 -emit-llvm -fno-stack-protector
+
+all: $(OBJS)
+
+.PHONY: clean
+
+clean:
+ rm -f $(OBJS)
+
+$(OBJS): %.o:%.c
+ $(CLANG) $(INC_FLAGS) \
+ -D__KERNEL__ -D__ASM_SYSREG_H \
+ -I../include $(LINUXINCLUDE) \
+ $(EXTRA_CFLAGS) -c $< -o -| $(LLC) -march=bpf -filetype=obj -o $@
+ bpftool gen skeleton rss.bpf.o > rss.bpf.skeleton.h
+ cp rss.bpf.skeleton.h ../../ebpf/
+
diff --git a/tools/ebpf/rss.bpf.c b/tools/ebpf/rss.bpf.c
new file mode 100644
index 0000000000..871729aa11
--- /dev/null
+++ b/tools/ebpf/rss.bpf.c
@@ -0,0 +1,552 @@
+/*
+ * eBPF RSS program
+ *
+ * Developed by Daynix Computing LTD (http://www.daynix.com)
+ *
+ * Authors:
+ * Andrew Melnychenko <andrew@daynix.com>
+ * Yuri Benditovich <yuri.benditovich@daynix.com>
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2. See
+ * the COPYING file in the top-level directory.
+ *
+ * Prepare:
+ * Requires llvm, clang, bpftool, linux kernel tree
+ *
+ * Build rss.bpf.skeleton.h:
+ * make -f Makefile.ebpf clean all
+ */
+
+#include <stddef.h>
+#include <stdbool.h>
+#include <linux/bpf.h>
+
+#include <linux/in.h>
+#include <linux/if_ether.h>
+#include <linux/ip.h>
+#include <linux/ipv6.h>
+
+#include <linux/udp.h>
+#include <linux/tcp.h>
+
+#include <bpf/bpf_helpers.h>
+#include <bpf/bpf_endian.h>
+#include <linux/virtio_net.h>
+
+#define INDIRECTION_TABLE_SIZE 128
+#define HASH_CALCULATION_BUFFER_SIZE 36
+
+struct rss_config_t {
+ __u8 redirect;
+ __u8 populate_hash;
+ __u32 hash_types;
+ __u16 indirections_len;
+ __u16 default_queue;
+} __attribute__((packed));
+
+struct toeplitz_key_data_t {
+ __u32 leftmost_32_bits;
+ __u8 next_byte[HASH_CALCULATION_BUFFER_SIZE];
+};
+
+struct packet_hash_info_t {
+ __u8 is_ipv4;
+ __u8 is_ipv6;
+ __u8 is_udp;
+ __u8 is_tcp;
+ __u8 is_ipv6_ext_src;
+ __u8 is_ipv6_ext_dst;
+
+ __u16 src_port;
+ __u16 dst_port;
+
+ union {
+ struct {
+ __be32 in_src;
+ __be32 in_dst;
+ };
+
+ struct {
+ struct in6_addr in6_src;
+ struct in6_addr in6_dst;
+ struct in6_addr in6_ext_src;
+ struct in6_addr in6_ext_dst;
+ };
+ };
+};
+
+struct bpf_map_def SEC("maps")
+tap_rss_map_configurations = {
+ .type = BPF_MAP_TYPE_ARRAY,
+ .key_size = sizeof(__u32),
+ .value_size = sizeof(struct rss_config_t),
+ .max_entries = 1,
+};
+
+struct bpf_map_def SEC("maps")
+tap_rss_map_toeplitz_key = {
+ .type = BPF_MAP_TYPE_ARRAY,
+ .key_size = sizeof(__u32),
+ .value_size = sizeof(struct toeplitz_key_data_t),
+ .max_entries = 1,
+};
+
+struct bpf_map_def SEC("maps")
+tap_rss_map_indirection_table = {
+ .type = BPF_MAP_TYPE_ARRAY,
+ .key_size = sizeof(__u32),
+ .value_size = sizeof(__u16),
+ .max_entries = INDIRECTION_TABLE_SIZE,
+};
+
+static inline void net_rx_rss_add_chunk(__u8 *rss_input, size_t *bytes_written,
+ const void *ptr, size_t size) {
+ __builtin_memcpy(&rss_input[*bytes_written], ptr, size);
+ *bytes_written += size;
+}
+
+static inline
+void net_toeplitz_add(__u32 *result,
+ __u8 *input,
+ __u32 len
+ , struct toeplitz_key_data_t *key) {
+
+ __u32 accumulator = *result;
+ __u32 leftmost_32_bits = key->leftmost_32_bits;
+ __u32 byte;
+
+ for (byte = 0; byte < HASH_CALCULATION_BUFFER_SIZE; byte++) {
+ __u8 input_byte = input[byte];
+ __u8 key_byte = key->next_byte[byte];
+ __u8 bit;
+
+ for (bit = 0; bit < 8; bit++) {
+ if (input_byte & (1 << 7)) {
+ accumulator ^= leftmost_32_bits;
+ }
+
+ leftmost_32_bits =
+ (leftmost_32_bits << 1) | ((key_byte & (1 << 7)) >> 7);
+
+ input_byte <<= 1;
+ key_byte <<= 1;
+ }
+ }
+
+ *result = accumulator;
+}
+
+
+static inline int ip6_extension_header_type(__u8 hdr_type)
+{
+ switch (hdr_type) {
+ case IPPROTO_HOPOPTS:
+ case IPPROTO_ROUTING:
+ case IPPROTO_FRAGMENT:
+ case IPPROTO_ICMPV6:
+ case IPPROTO_NONE:
+ case IPPROTO_DSTOPTS:
+ case IPPROTO_MH:
+ return 1;
+ default:
+ return 0;
+ }
+}
+/*
+ * According to https://www.iana.org/assignments/ipv6-parameters/ipv6-parameters.xhtml
+ * we suspect that there are would be no more than 11 extensions in IPv6 header,
+ * also there is 27 TLV options for Destination and Hop-by-hop extensions.
+ * Need to choose reasonable amount of maximum extensions/options we may check to find
+ * ext src/dst.
+ */
+#define IP6_EXTENSIONS_COUNT 11
+#define IP6_OPTIONS_COUNT 30
+
+static inline int parse_ipv6_ext(struct __sk_buff *skb,
+ struct packet_hash_info_t *info,
+ __u8 *l4_protocol, size_t *l4_offset)
+{
+ int err = 0;
+
+ if (!ip6_extension_header_type(*l4_protocol)) {
+ return 0;
+ }
+
+ struct ipv6_opt_hdr ext_hdr = {};
+
+ for (unsigned int i = 0; i < IP6_EXTENSIONS_COUNT; ++i) {
+
+ err = bpf_skb_load_bytes_relative(skb, *l4_offset, &ext_hdr,
+ sizeof(ext_hdr), BPF_HDR_START_NET);
+ if (err)
+ goto error;
+
+ if (*l4_protocol == IPPROTO_ROUTING) {
+ struct ipv6_rt_hdr ext_rt = {};
+
+ err = bpf_skb_load_bytes_relative(skb, *l4_offset, &ext_rt,
+ sizeof(ext_rt), BPF_HDR_START_NET);
+ if (err)
+ goto error;
+
+ if ((ext_rt.type == IPV6_SRCRT_TYPE_2) &&
+ (ext_rt.hdrlen == sizeof(struct in6_addr) / 8) &&
+ (ext_rt.segments_left == 1)) {
+
+ err = bpf_skb_load_bytes_relative(skb,
+ *l4_offset + offsetof(struct rt2_hdr, addr),
+ &info->in6_ext_dst, sizeof(info->in6_ext_dst),
+ BPF_HDR_START_NET);
+ if (err)
+ goto error;
+
+ info->is_ipv6_ext_dst = 1;
+ }
+
+ } else if (*l4_protocol == IPPROTO_DSTOPTS) {
+ struct ipv6_opt_t {
+ __u8 type;
+ __u8 length;
+ } __attribute__((packed)) opt = {};
+
+ size_t opt_offset = sizeof(ext_hdr);
+
+ for (unsigned int j = 0; j < IP6_OPTIONS_COUNT; ++j) {
+ err = bpf_skb_load_bytes_relative(skb, *l4_offset + opt_offset,
+ &opt, sizeof(opt), BPF_HDR_START_NET);
+ if (err)
+ goto error;
+
+ opt_offset += (opt.type == IPV6_TLV_PAD1) ?
+ 1 : opt.length + sizeof(opt);
+
+ if (opt_offset + 1 >= ext_hdr.hdrlen * 8) {
+ break;
+ }
+
+ if (opt.type == IPV6_TLV_HAO) {
+ err = bpf_skb_load_bytes_relative(skb,
+ *l4_offset + opt_offset + offsetof(struct ipv6_destopt_hao, addr),
+ &info->in6_ext_src, sizeof(info->in6_ext_src),
+ BPF_HDR_START_NET);
+ if (err)
+ goto error;
+
+ info->is_ipv6_ext_src = 1;
+ break;
+ }
+ }
+ }
+
+ *l4_protocol = ext_hdr.nexthdr;
+ *l4_offset += (ext_hdr.hdrlen + 1) * 8;
+
+ if (!ip6_extension_header_type(ext_hdr.nexthdr)) {
+ return 0;
+ }
+ }
+
+ return 0;
+error:
+ return err;
+}
+
+static __be16 parse_eth_type(struct __sk_buff *skb)
+{
+ unsigned int offset = 12;
+ __be16 ret = 0;
+ int err = 0;
+
+ err = bpf_skb_load_bytes_relative(skb, offset, &ret, sizeof(ret),
+ BPF_HDR_START_MAC);
+ if (err)
+ return 0;
+
+ switch (bpf_ntohs(ret)) {
+ case ETH_P_8021AD:
+ offset += 4;
+ case ETH_P_8021Q:
+ offset += 4;
+ err = bpf_skb_load_bytes_relative(skb, offset, &ret, sizeof(ret),
+ BPF_HDR_START_MAC);
+ default:
+ break;
+ }
+
+ if (err)
+ return 0;
+
+ return ret;
+}
+
+static inline int parse_packet(struct __sk_buff *skb,
+ struct packet_hash_info_t *info)
+{
+ int err = 0;
+
+ if (!info || !skb) {
+ return -1;
+ }
+
+ size_t l4_offset = 0;
+ __u8 l4_protocol = 0;
+ __u16 l3_protocol = bpf_ntohs(parse_eth_type(skb));
+ if (l3_protocol == 0) {
+ err = -1;
+ goto error;
+ }
+
+ if (l3_protocol == ETH_P_IP) {
+ info->is_ipv4 = 1;
+
+ struct iphdr ip = {};
+ err = bpf_skb_load_bytes_relative(skb, 0, &ip, sizeof(ip),
+ BPF_HDR_START_NET);
+ if (err)
+ goto error;
+
+ info->in_src = ip.saddr;
+ info->in_dst = ip.daddr;
+
+ l4_protocol = ip.protocol;
+ l4_offset = ip.ihl * 4;
+ } else if (l3_protocol == ETH_P_IPV6) {
+ info->is_ipv6 = 1;
+
+ struct ipv6hdr ip6 = {};
+ err = bpf_skb_load_bytes_relative(skb, 0, &ip6, sizeof(ip6),
+ BPF_HDR_START_NET);
+ if (err)
+ goto error;
+
+ info->in6_src = ip6.saddr;
+ info->in6_dst = ip6.daddr;
+
+ l4_protocol = ip6.nexthdr;
+ l4_offset = sizeof(ip6);
+
+ err = parse_ipv6_ext(skb, info, &l4_protocol, &l4_offset);
+ if (err)
+ goto error;
+ }
+
+ if (l4_protocol != 0) {
+ if (l4_protocol == IPPROTO_TCP) {
+ info->is_tcp = 1;
+
+ struct tcphdr tcp = {};
+ err = bpf_skb_load_bytes_relative(skb, l4_offset, &tcp, sizeof(tcp),
+ BPF_HDR_START_NET);
+ if (err)
+ goto error;
+
+ info->src_port = tcp.source;
+ info->dst_port = tcp.dest;
+ } else if (l4_protocol == IPPROTO_UDP) { /* TODO: add udplite? */
+ info->is_udp = 1;
+
+ struct udphdr udp = {};
+ err = bpf_skb_load_bytes_relative(skb, l4_offset, &udp, sizeof(udp),
+ BPF_HDR_START_NET);
+ if (err)
+ goto error;
+
+ info->src_port = udp.source;
+ info->dst_port = udp.dest;
+ }
+ }
+
+ return 0;
+
+error:
+ return err;
+}
+
+static inline __u32 calculate_rss_hash(struct __sk_buff *skb,
+ struct rss_config_t *config, struct toeplitz_key_data_t *toe)
+{
+ __u8 rss_input[HASH_CALCULATION_BUFFER_SIZE] = {};
+ size_t bytes_written = 0;
+ __u32 result = 0;
+ int err = 0;
+ struct packet_hash_info_t packet_info = {};
+
+ err = parse_packet(skb, &packet_info);
+ if (err)
+ return 0;
+
+ if (packet_info.is_ipv4) {
+ if (packet_info.is_tcp &&
+ config->hash_types & VIRTIO_NET_RSS_HASH_TYPE_TCPv4) {
+
+ net_rx_rss_add_chunk(rss_input, &bytes_written,
+ &packet_info.in_src,
+ sizeof(packet_info.in_src));
+ net_rx_rss_add_chunk(rss_input, &bytes_written,
+ &packet_info.in_dst,
+ sizeof(packet_info.in_dst));
+ net_rx_rss_add_chunk(rss_input, &bytes_written,
+ &packet_info.src_port,
+ sizeof(packet_info.src_port));
+ net_rx_rss_add_chunk(rss_input, &bytes_written,
+ &packet_info.dst_port,
+ sizeof(packet_info.dst_port));
+ } else if (packet_info.is_udp &&
+ config->hash_types & VIRTIO_NET_RSS_HASH_TYPE_UDPv4) {
+
+ net_rx_rss_add_chunk(rss_input, &bytes_written,
+ &packet_info.in_src,
+ sizeof(packet_info.in_src));
+ net_rx_rss_add_chunk(rss_input, &bytes_written,
+ &packet_info.in_dst,
+ sizeof(packet_info.in_dst));
+ net_rx_rss_add_chunk(rss_input, &bytes_written,
+ &packet_info.src_port,
+ sizeof(packet_info.src_port));
+ net_rx_rss_add_chunk(rss_input, &bytes_written,
+ &packet_info.dst_port,
+ sizeof(packet_info.dst_port));
+ } else if (config->hash_types & VIRTIO_NET_RSS_HASH_TYPE_IPv4) {
+ net_rx_rss_add_chunk(rss_input, &bytes_written,
+ &packet_info.in_src,
+ sizeof(packet_info.in_src));
+ net_rx_rss_add_chunk(rss_input, &bytes_written,
+ &packet_info.in_dst,
+ sizeof(packet_info.in_dst));
+ }
+ } else if (packet_info.is_ipv6) {
+ if (packet_info.is_tcp &&
+ config->hash_types & VIRTIO_NET_RSS_HASH_TYPE_TCPv6) {
+
+ if (packet_info.is_ipv6_ext_src &&
+ config->hash_types & VIRTIO_NET_RSS_HASH_TYPE_TCP_EX) {
+
+ net_rx_rss_add_chunk(rss_input, &bytes_written,
+ &packet_info.in6_ext_src,
+ sizeof(packet_info.in6_ext_src));
+ } else {
+ net_rx_rss_add_chunk(rss_input, &bytes_written,
+ &packet_info.in6_src,
+ sizeof(packet_info.in6_src));
+ }
+ if (packet_info.is_ipv6_ext_dst &&
+ config->hash_types & VIRTIO_NET_RSS_HASH_TYPE_TCP_EX) {
+
+ net_rx_rss_add_chunk(rss_input, &bytes_written,
+ &packet_info.in6_ext_dst,
+ sizeof(packet_info.in6_ext_dst));
+ } else {
+ net_rx_rss_add_chunk(rss_input, &bytes_written,
+ &packet_info.in6_dst,
+ sizeof(packet_info.in6_dst));
+ }
+ net_rx_rss_add_chunk(rss_input, &bytes_written,
+ &packet_info.src_port,
+ sizeof(packet_info.src_port));
+ net_rx_rss_add_chunk(rss_input, &bytes_written,
+ &packet_info.dst_port,
+ sizeof(packet_info.dst_port));
+ } else if (packet_info.is_udp &&
+ config->hash_types & VIRTIO_NET_RSS_HASH_TYPE_UDPv6) {
+
+ if (packet_info.is_ipv6_ext_src &&
+ config->hash_types & VIRTIO_NET_RSS_HASH_TYPE_UDP_EX) {
+
+ net_rx_rss_add_chunk(rss_input, &bytes_written,
+ &packet_info.in6_ext_src,
+ sizeof(packet_info.in6_ext_src));
+ } else {
+ net_rx_rss_add_chunk(rss_input, &bytes_written,
+ &packet_info.in6_src,
+ sizeof(packet_info.in6_src));
+ }
+ if (packet_info.is_ipv6_ext_dst &&
+ config->hash_types & VIRTIO_NET_RSS_HASH_TYPE_UDP_EX) {
+
+ net_rx_rss_add_chunk(rss_input, &bytes_written,
+ &packet_info.in6_ext_dst,
+ sizeof(packet_info.in6_ext_dst));
+ } else {
+ net_rx_rss_add_chunk(rss_input, &bytes_written,
+ &packet_info.in6_dst,
+ sizeof(packet_info.in6_dst));
+ }
+
+ net_rx_rss_add_chunk(rss_input, &bytes_written,
+ &packet_info.src_port,
+ sizeof(packet_info.src_port));
+ net_rx_rss_add_chunk(rss_input, &bytes_written,
+ &packet_info.dst_port,
+ sizeof(packet_info.dst_port));
+
+ } else if (config->hash_types & VIRTIO_NET_RSS_HASH_TYPE_IPv6) {
+ if (packet_info.is_ipv6_ext_src &&
+ config->hash_types & VIRTIO_NET_RSS_HASH_TYPE_IP_EX) {
+
+ net_rx_rss_add_chunk(rss_input, &bytes_written,
+ &packet_info.in6_ext_src,
+ sizeof(packet_info.in6_ext_src));
+ } else {
+ net_rx_rss_add_chunk(rss_input, &bytes_written,
+ &packet_info.in6_src,
+ sizeof(packet_info.in6_src));
+ }
+ if (packet_info.is_ipv6_ext_dst &&
+ config->hash_types & VIRTIO_NET_RSS_HASH_TYPE_IP_EX) {
+
+ net_rx_rss_add_chunk(rss_input, &bytes_written,
+ &packet_info.in6_ext_dst,
+ sizeof(packet_info.in6_ext_dst));
+ } else {
+ net_rx_rss_add_chunk(rss_input, &bytes_written,
+ &packet_info.in6_dst,
+ sizeof(packet_info.in6_dst));
+ }
+ }
+ }
+
+ if (bytes_written) {
+ net_toeplitz_add(&result, rss_input, bytes_written, toe);
+ }
+
+ return result;
+}
+
+SEC("tun_rss_steering")
+int tun_rss_steering_prog(struct __sk_buff *skb)
+{
+
+ struct rss_config_t *config;
+ struct toeplitz_key_data_t *toe;
+
+ __u32 key = 0;
+ __u32 hash = 0;
+
+ config = bpf_map_lookup_elem(&tap_rss_map_configurations, &key);
+ toe = bpf_map_lookup_elem(&tap_rss_map_toeplitz_key, &key);
+
+ if (config && toe) {
+ if (!config->redirect) {
+ return config->default_queue;
+ }
+
+ hash = calculate_rss_hash(skb, config, toe);
+ if (hash) {
+ __u32 table_idx = hash % config->indirections_len;
+ __u16 *queue = 0;
+
+ queue = bpf_map_lookup_elem(&tap_rss_map_indirection_table,
+ &table_idx);
+
+ if (queue) {
+ return *queue;
+ }
+ }
+
+ return config->default_queue;
+ }
+
+ return -1;
+}
+
+char _license[] SEC("license") = "GPL v2";
--
2.31.0
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH v5 4/7] ebpf: Added eBPF RSS loader.
2021-03-25 15:35 [PATCH v5 0/7] eBPF RSS support for virtio-net Andrew Melnychenko
` (2 preceding siblings ...)
2021-03-25 15:35 ` [PATCH v5 3/7] ebpf: Added eBPF RSS program Andrew Melnychenko
@ 2021-03-25 15:35 ` Andrew Melnychenko
2021-03-25 15:35 ` [PATCH v5 5/7] virtio-net: Added eBPF RSS to virtio-net Andrew Melnychenko
` (5 subsequent siblings)
9 siblings, 0 replies; 15+ messages in thread
From: Andrew Melnychenko @ 2021-03-25 15:35 UTC (permalink / raw)
To: jasowang, mst; +Cc: yan, yuri.benditovich, berrange, qemu-devel
From: Andrew <andrew@daynix.com>
Added function that loads RSS eBPF program.
Added stub functions for RSS eBPF loader.
Added meson and configuration options.
By default, eBPF feature enabled if libbpf is present in the build system.
libbpf checked in configuration shell script and meson script.
Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com>
Signed-off-by: Andrew Melnychenko <andrew@daynix.com>
---
configure | 8 +-
ebpf/ebpf_rss-stub.c | 40 ++++
ebpf/ebpf_rss.c | 165 ++++++++++++++++
ebpf/ebpf_rss.h | 44 +++++
ebpf/meson.build | 1 +
ebpf/rss.bpf.skeleton.h | 423 ++++++++++++++++++++++++++++++++++++++++
ebpf/trace-events | 4 +
ebpf/trace.h | 2 +
meson.build | 9 +
meson_options.txt | 2 +
10 files changed, 697 insertions(+), 1 deletion(-)
create mode 100644 ebpf/ebpf_rss-stub.c
create mode 100644 ebpf/ebpf_rss.c
create mode 100644 ebpf/ebpf_rss.h
create mode 100644 ebpf/meson.build
create mode 100644 ebpf/rss.bpf.skeleton.h
create mode 100644 ebpf/trace-events
create mode 100644 ebpf/trace.h
diff --git a/configure b/configure
index f7d022a5db..23e628f6c3 100755
--- a/configure
+++ b/configure
@@ -348,6 +348,7 @@ vhost_vsock="$default_feature"
vhost_user="no"
vhost_user_blk_server="auto"
vhost_user_fs="$default_feature"
+bpf="auto"
kvm="auto"
hax="auto"
hvf="auto"
@@ -1227,6 +1228,10 @@ for opt do
;;
--enable-membarrier) membarrier="yes"
;;
+ --disable-bpf) bpf="disabled"
+ ;;
+ --enable-bpf) bpf="enabled"
+ ;;
--disable-blobs) blobs="false"
;;
--with-pkgversion=*) pkgversion="$optarg"
@@ -1860,6 +1865,7 @@ disabled with --disable-FEATURE, default is enabled if available
vhost-user vhost-user backend support
vhost-user-blk-server vhost-user-blk server support
vhost-vdpa vhost-vdpa kernel backend support
+ bpf BPF kernel support
spice spice
rbd rados block device (rbd)
libiscsi iscsi support
@@ -6424,7 +6430,7 @@ NINJA=$ninja $meson setup \
-Dattr=$attr -Ddefault_devices=$default_devices \
-Ddocs=$docs -Dsphinx_build=$sphinx_build -Dinstall_blobs=$blobs \
-Dvhost_user_blk_server=$vhost_user_blk_server -Dmultiprocess=$multiprocess \
- -Dfuse=$fuse -Dfuse_lseek=$fuse_lseek -Dguest_agent_msi=$guest_agent_msi \
+ -Dfuse=$fuse -Dfuse_lseek=$fuse_lseek -Dguest_agent_msi=$guest_agent_msi -Dbpf=$bpf\
$(if test "$default_features" = no; then echo "-Dauto_features=disabled"; fi) \
-Dtcg_interpreter=$tcg_interpreter \
$cross_arg \
diff --git a/ebpf/ebpf_rss-stub.c b/ebpf/ebpf_rss-stub.c
new file mode 100644
index 0000000000..e71e229190
--- /dev/null
+++ b/ebpf/ebpf_rss-stub.c
@@ -0,0 +1,40 @@
+/*
+ * eBPF RSS stub file
+ *
+ * Developed by Daynix Computing LTD (http://www.daynix.com)
+ *
+ * Authors:
+ * Yuri Benditovich <yuri.benditovich@daynix.com>
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2. See
+ * the COPYING file in the top-level directory.
+ */
+
+#include "qemu/osdep.h"
+#include "ebpf/ebpf_rss.h"
+
+void ebpf_rss_init(struct EBPFRSSContext *ctx)
+{
+
+}
+
+bool ebpf_rss_is_loaded(struct EBPFRSSContext *ctx)
+{
+ return false;
+}
+
+bool ebpf_rss_load(struct EBPFRSSContext *ctx)
+{
+ return false;
+}
+
+bool ebpf_rss_set_all(struct EBPFRSSContext *ctx, struct EBPFRSSConfig *config,
+ uint16_t *indirections_table, uint8_t *toeplitz_key)
+{
+ return false;
+}
+
+void ebpf_rss_unload(struct EBPFRSSContext *ctx)
+{
+
+}
diff --git a/ebpf/ebpf_rss.c b/ebpf/ebpf_rss.c
new file mode 100644
index 0000000000..118c68da83
--- /dev/null
+++ b/ebpf/ebpf_rss.c
@@ -0,0 +1,165 @@
+/*
+ * eBPF RSS loader
+ *
+ * Developed by Daynix Computing LTD (http://www.daynix.com)
+ *
+ * Authors:
+ * Andrew Melnychenko <andrew@daynix.com>
+ * Yuri Benditovich <yuri.benditovich@daynix.com>
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2. See
+ * the COPYING file in the top-level directory.
+ */
+
+#include "qemu/osdep.h"
+#include "qemu/error-report.h"
+
+#include <bpf/libbpf.h>
+#include <bpf/bpf.h>
+
+#include "hw/virtio/virtio-net.h" /* VIRTIO_NET_RSS_MAX_TABLE_LEN */
+
+#include "ebpf/ebpf_rss.h"
+#include "ebpf/rss.bpf.skeleton.h"
+#include "trace.h"
+
+void ebpf_rss_init(struct EBPFRSSContext *ctx)
+{
+ if (ctx != NULL) {
+ ctx->obj = NULL;
+ }
+}
+
+bool ebpf_rss_is_loaded(struct EBPFRSSContext *ctx)
+{
+ return ctx != NULL && ctx->obj != NULL;
+}
+
+bool ebpf_rss_load(struct EBPFRSSContext *ctx)
+{
+ struct rss_bpf *rss_bpf_ctx;
+
+ if (ctx == NULL) {
+ return false;
+ }
+
+ rss_bpf_ctx = rss_bpf__open();
+ if (rss_bpf_ctx == NULL) {
+ trace_ebpf_error("eBPF RSS", "can not open eBPF RSS object");
+ goto error;
+ }
+
+ bpf_program__set_socket_filter(rss_bpf_ctx->progs.tun_rss_steering_prog);
+
+ if (rss_bpf__load(rss_bpf_ctx)) {
+ trace_ebpf_error("eBPF RSS", "can not load RSS program");
+ goto error;
+ }
+
+ ctx->obj = rss_bpf_ctx;
+ ctx->program_fd = bpf_program__fd(
+ rss_bpf_ctx->progs.tun_rss_steering_prog);
+ ctx->map_configuration = bpf_map__fd(
+ rss_bpf_ctx->maps.tap_rss_map_configurations);
+ ctx->map_indirections_table = bpf_map__fd(
+ rss_bpf_ctx->maps.tap_rss_map_indirection_table);
+ ctx->map_toeplitz_key = bpf_map__fd(
+ rss_bpf_ctx->maps.tap_rss_map_toeplitz_key);
+
+ return true;
+error:
+ rss_bpf__destroy(rss_bpf_ctx);
+ ctx->obj = NULL;
+
+ return false;
+}
+
+static bool ebpf_rss_set_config(struct EBPFRSSContext *ctx,
+ struct EBPFRSSConfig *config)
+{
+ uint32_t map_key = 0;
+
+ if (!ebpf_rss_is_loaded(ctx)) {
+ return false;
+ }
+ if (bpf_map_update_elem(ctx->map_configuration,
+ &map_key, config, 0) < 0) {
+ return false;
+ }
+ return true;
+}
+
+static bool ebpf_rss_set_indirections_table(struct EBPFRSSContext *ctx,
+ uint16_t *indirections_table,
+ size_t len)
+{
+ uint32_t i = 0;
+
+ if (!ebpf_rss_is_loaded(ctx) || indirections_table == NULL ||
+ len > VIRTIO_NET_RSS_MAX_TABLE_LEN) {
+ return false;
+ }
+
+ for (; i < len; ++i) {
+ if (bpf_map_update_elem(ctx->map_indirections_table, &i,
+ indirections_table + i, 0) < 0) {
+ return false;
+ }
+ }
+ return true;
+}
+
+static bool ebpf_rss_set_toepliz_key(struct EBPFRSSContext *ctx,
+ uint8_t *toeplitz_key)
+{
+ uint32_t map_key = 0;
+
+ /* prepare toeplitz key */
+ uint8_t toe[VIRTIO_NET_RSS_MAX_KEY_SIZE] = {};
+
+ if (!ebpf_rss_is_loaded(ctx) || toeplitz_key == NULL) {
+ return false;
+ }
+ memcpy(toe, toeplitz_key, VIRTIO_NET_RSS_MAX_KEY_SIZE);
+ *(uint32_t *)toe = ntohl(*(uint32_t *)toe);
+
+ if (bpf_map_update_elem(ctx->map_toeplitz_key, &map_key, toe,
+ 0) < 0) {
+ return false;
+ }
+ return true;
+}
+
+bool ebpf_rss_set_all(struct EBPFRSSContext *ctx, struct EBPFRSSConfig *config,
+ uint16_t *indirections_table, uint8_t *toeplitz_key)
+{
+ if (!ebpf_rss_is_loaded(ctx) || config == NULL ||
+ indirections_table == NULL || toeplitz_key == NULL) {
+ return false;
+ }
+
+ if (!ebpf_rss_set_config(ctx, config)) {
+ return false;
+ }
+
+ if (!ebpf_rss_set_indirections_table(ctx, indirections_table,
+ config->indirections_len)) {
+ return false;
+ }
+
+ if (!ebpf_rss_set_toepliz_key(ctx, toeplitz_key)) {
+ return false;
+ }
+
+ return true;
+}
+
+void ebpf_rss_unload(struct EBPFRSSContext *ctx)
+{
+ if (!ebpf_rss_is_loaded(ctx)) {
+ return;
+ }
+
+ rss_bpf__destroy(ctx->obj);
+ ctx->obj = NULL;
+}
diff --git a/ebpf/ebpf_rss.h b/ebpf/ebpf_rss.h
new file mode 100644
index 0000000000..bf3f2572c7
--- /dev/null
+++ b/ebpf/ebpf_rss.h
@@ -0,0 +1,44 @@
+/*
+ * eBPF RSS header
+ *
+ * Developed by Daynix Computing LTD (http://www.daynix.com)
+ *
+ * Authors:
+ * Andrew Melnychenko <andrew@daynix.com>
+ * Yuri Benditovich <yuri.benditovich@daynix.com>
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2. See
+ * the COPYING file in the top-level directory.
+ */
+
+#ifndef QEMU_EBPF_RSS_H
+#define QEMU_EBPF_RSS_H
+
+struct EBPFRSSContext {
+ void *obj;
+ int program_fd;
+ int map_configuration;
+ int map_toeplitz_key;
+ int map_indirections_table;
+};
+
+struct EBPFRSSConfig {
+ uint8_t redirect;
+ uint8_t populate_hash;
+ uint32_t hash_types;
+ uint16_t indirections_len;
+ uint16_t default_queue;
+} __attribute__((packed));
+
+void ebpf_rss_init(struct EBPFRSSContext *ctx);
+
+bool ebpf_rss_is_loaded(struct EBPFRSSContext *ctx);
+
+bool ebpf_rss_load(struct EBPFRSSContext *ctx);
+
+bool ebpf_rss_set_all(struct EBPFRSSContext *ctx, struct EBPFRSSConfig *config,
+ uint16_t *indirections_table, uint8_t *toeplitz_key);
+
+void ebpf_rss_unload(struct EBPFRSSContext *ctx);
+
+#endif /* QEMU_EBPF_RSS_H */
diff --git a/ebpf/meson.build b/ebpf/meson.build
new file mode 100644
index 0000000000..9cd0635370
--- /dev/null
+++ b/ebpf/meson.build
@@ -0,0 +1 @@
+common_ss.add(when: libbpf, if_true: files('ebpf_rss.c'), if_false: files('ebpf_rss-stub.c'))
diff --git a/ebpf/rss.bpf.skeleton.h b/ebpf/rss.bpf.skeleton.h
new file mode 100644
index 0000000000..8468596b45
--- /dev/null
+++ b/ebpf/rss.bpf.skeleton.h
@@ -0,0 +1,423 @@
+/* SPDX-License-Identifier: (LGPL-2.1 OR BSD-2-Clause) */
+
+/* THIS FILE IS AUTOGENERATED! */
+#ifndef __RSS_BPF_SKEL_H__
+#define __RSS_BPF_SKEL_H__
+
+#include <stdlib.h>
+#include <bpf/libbpf.h>
+
+struct rss_bpf {
+ struct bpf_object_skeleton *skeleton;
+ struct bpf_object *obj;
+ struct {
+ struct bpf_map *tap_rss_map_configurations;
+ struct bpf_map *tap_rss_map_indirection_table;
+ struct bpf_map *tap_rss_map_toeplitz_key;
+ } maps;
+ struct {
+ struct bpf_program *tun_rss_steering_prog;
+ } progs;
+ struct {
+ struct bpf_link *tun_rss_steering_prog;
+ } links;
+};
+
+static void
+rss_bpf__destroy(struct rss_bpf *obj)
+{
+ if (!obj)
+ return;
+ if (obj->skeleton)
+ bpf_object__destroy_skeleton(obj->skeleton);
+ free(obj);
+}
+
+static inline int
+rss_bpf__create_skeleton(struct rss_bpf *obj);
+
+static inline struct rss_bpf *
+rss_bpf__open_opts(const struct bpf_object_open_opts *opts)
+{
+ struct rss_bpf *obj;
+
+ obj = (struct rss_bpf *)calloc(1, sizeof(*obj));
+ if (!obj)
+ return NULL;
+ if (rss_bpf__create_skeleton(obj))
+ goto err;
+ if (bpf_object__open_skeleton(obj->skeleton, opts))
+ goto err;
+
+ return obj;
+err:
+ rss_bpf__destroy(obj);
+ return NULL;
+}
+
+static inline struct rss_bpf *
+rss_bpf__open(void)
+{
+ return rss_bpf__open_opts(NULL);
+}
+
+static inline int
+rss_bpf__load(struct rss_bpf *obj)
+{
+ return bpf_object__load_skeleton(obj->skeleton);
+}
+
+static inline struct rss_bpf *
+rss_bpf__open_and_load(void)
+{
+ struct rss_bpf *obj;
+
+ obj = rss_bpf__open();
+ if (!obj)
+ return NULL;
+ if (rss_bpf__load(obj)) {
+ rss_bpf__destroy(obj);
+ return NULL;
+ }
+ return obj;
+}
+
+static inline int
+rss_bpf__attach(struct rss_bpf *obj)
+{
+ return bpf_object__attach_skeleton(obj->skeleton);
+}
+
+static inline void
+rss_bpf__detach(struct rss_bpf *obj)
+{
+ return bpf_object__detach_skeleton(obj->skeleton);
+}
+
+static inline int
+rss_bpf__create_skeleton(struct rss_bpf *obj)
+{
+ struct bpf_object_skeleton *s;
+
+ s = (struct bpf_object_skeleton *)calloc(1, sizeof(*s));
+ if (!s)
+ return -1;
+ obj->skeleton = s;
+
+ s->sz = sizeof(*s);
+ s->name = "rss_bpf";
+ s->obj = &obj->obj;
+
+ /* maps */
+ s->map_cnt = 3;
+ s->map_skel_sz = sizeof(*s->maps);
+ s->maps = (struct bpf_map_skeleton *)calloc(s->map_cnt, s->map_skel_sz);
+ if (!s->maps)
+ goto err;
+
+ s->maps[0].name = "tap_rss_map_configurations";
+ s->maps[0].map = &obj->maps.tap_rss_map_configurations;
+
+ s->maps[1].name = "tap_rss_map_indirection_table";
+ s->maps[1].map = &obj->maps.tap_rss_map_indirection_table;
+
+ s->maps[2].name = "tap_rss_map_toeplitz_key";
+ s->maps[2].map = &obj->maps.tap_rss_map_toeplitz_key;
+
+ /* programs */
+ s->prog_cnt = 1;
+ s->prog_skel_sz = sizeof(*s->progs);
+ s->progs = (struct bpf_prog_skeleton *)calloc(s->prog_cnt, s->prog_skel_sz);
+ if (!s->progs)
+ goto err;
+
+ s->progs[0].name = "tun_rss_steering_prog";
+ s->progs[0].prog = &obj->progs.tun_rss_steering_prog;
+ s->progs[0].link = &obj->links.tun_rss_steering_prog;
+
+ s->data_sz = 7864;
+ s->data = (void *)"\
+\x7f\x45\x4c\x46\x02\x01\x01\0\0\0\0\0\0\0\0\0\x01\0\xf7\0\x01\0\0\0\0\0\0\0\0\
+\0\0\0\0\0\0\0\0\0\0\0\x38\x1c\0\0\0\0\0\0\0\0\0\0\x40\0\0\0\0\0\x40\0\x0a\0\
+\x01\0\xbf\x18\0\0\0\0\0\0\xb7\x01\0\0\0\0\0\0\x63\x1a\x4c\xff\0\0\0\0\xbf\xa7\
+\0\0\0\0\0\0\x07\x07\0\0\x4c\xff\xff\xff\x18\x01\0\0\0\0\0\0\0\0\0\0\0\0\0\0\
+\xbf\x72\0\0\0\0\0\0\x85\0\0\0\x01\0\0\0\xbf\x06\0\0\0\0\0\0\x18\x01\0\0\0\0\0\
+\0\0\0\0\0\0\0\0\0\xbf\x72\0\0\0\0\0\0\x85\0\0\0\x01\0\0\0\xbf\x07\0\0\0\0\0\0\
+\x18\0\0\0\xff\xff\xff\xff\0\0\0\0\0\0\0\0\x15\x06\x57\x02\0\0\0\0\xbf\x79\0\0\
+\0\0\0\0\x15\x09\x55\x02\0\0\0\0\x71\x61\0\0\0\0\0\0\x55\x01\x01\0\0\0\0\0\x05\
+\0\x4e\x02\0\0\0\0\xb7\x01\0\0\0\0\0\0\x63\x1a\xc0\xff\0\0\0\0\x7b\x1a\xb8\xff\
+\0\0\0\0\x7b\x1a\xb0\xff\0\0\0\0\x7b\x1a\xa8\xff\0\0\0\0\x7b\x1a\xa0\xff\0\0\0\
+\0\x63\x1a\x98\xff\0\0\0\0\x7b\x1a\x90\xff\0\0\0\0\x7b\x1a\x88\xff\0\0\0\0\x7b\
+\x1a\x80\xff\0\0\0\0\x7b\x1a\x78\xff\0\0\0\0\x7b\x1a\x70\xff\0\0\0\0\x7b\x1a\
+\x68\xff\0\0\0\0\x7b\x1a\x60\xff\0\0\0\0\x7b\x1a\x58\xff\0\0\0\0\x7b\x1a\x50\
+\xff\0\0\0\0\x15\x08\x3d\x02\0\0\0\0\x6b\x1a\xd0\xff\0\0\0\0\xbf\xa3\0\0\0\0\0\
+\0\x07\x03\0\0\xd0\xff\xff\xff\xbf\x81\0\0\0\0\0\0\xb7\x02\0\0\x0c\0\0\0\xb7\
+\x04\0\0\x02\0\0\0\xb7\x05\0\0\0\0\0\0\x85\0\0\0\x44\0\0\0\x67\0\0\0\x20\0\0\0\
+\x77\0\0\0\x20\0\0\0\x55\0\x11\0\0\0\0\0\xb7\x02\0\0\x10\0\0\0\x69\xa1\xd0\xff\
+\0\0\0\0\xbf\x13\0\0\0\0\0\0\xdc\x03\0\0\x10\0\0\0\x15\x03\x02\0\0\x81\0\0\x55\
+\x03\x0c\0\xa8\x88\0\0\xb7\x02\0\0\x14\0\0\0\xbf\xa3\0\0\0\0\0\0\x07\x03\0\0\
+\xd0\xff\xff\xff\xbf\x81\0\0\0\0\0\0\xb7\x04\0\0\x02\0\0\0\xb7\x05\0\0\0\0\0\0\
+\x85\0\0\0\x44\0\0\0\x69\xa1\xd0\xff\0\0\0\0\x67\0\0\0\x20\0\0\0\x77\0\0\0\x20\
+\0\0\0\x15\0\x01\0\0\0\0\0\x05\0\x20\x02\0\0\0\0\x15\x01\x1f\x02\0\0\0\0\x15\
+\x01\x4b\0\x86\xdd\0\0\x55\x01\x30\0\x08\0\0\0\xb7\x01\0\0\x01\0\0\0\x73\x1a\
+\x50\xff\0\0\0\0\xb7\x01\0\0\0\0\0\0\x63\x1a\xe0\xff\0\0\0\0\x7b\x1a\xd8\xff\0\
+\0\0\0\x7b\x1a\xd0\xff\0\0\0\0\xbf\xa3\0\0\0\0\0\0\x07\x03\0\0\xd0\xff\xff\xff\
+\xbf\x81\0\0\0\0\0\0\xb7\x02\0\0\0\0\0\0\xb7\x04\0\0\x14\0\0\0\xb7\x05\0\0\x01\
+\0\0\0\x85\0\0\0\x44\0\0\0\x67\0\0\0\x20\0\0\0\x77\0\0\0\x20\0\0\0\x55\0\x0d\
+\x02\0\0\0\0\x61\xa1\xdc\xff\0\0\0\0\x63\x1a\x5c\xff\0\0\0\0\x61\xa1\xe0\xff\0\
+\0\0\0\x63\x1a\x60\xff\0\0\0\0\x71\xa3\xd9\xff\0\0\0\0\x71\xa1\xd0\xff\0\0\0\0\
+\x67\x01\0\0\x02\0\0\0\x57\x01\0\0\x3c\0\0\0\x7b\x1a\x40\xff\0\0\0\0\x57\x03\0\
+\0\xff\0\0\0\x15\x03\x33\x01\x11\0\0\0\x55\x03\x14\0\x06\0\0\0\xb7\x01\0\0\x01\
+\0\0\0\x73\x1a\x53\xff\0\0\0\0\xb7\x01\0\0\0\0\0\0\x63\x1a\xe0\xff\0\0\0\0\x7b\
+\x1a\xd8\xff\0\0\0\0\x7b\x1a\xd0\xff\0\0\0\0\xbf\xa3\0\0\0\0\0\0\x07\x03\0\0\
+\xd0\xff\xff\xff\xbf\x81\0\0\0\0\0\0\x79\xa2\x40\xff\0\0\0\0\xb7\x04\0\0\x14\0\
+\0\0\xb7\x05\0\0\x01\0\0\0\x85\0\0\0\x44\0\0\0\x67\0\0\0\x20\0\0\0\x77\0\0\0\
+\x20\0\0\0\x55\0\xf1\x01\0\0\0\0\x69\xa1\xd0\xff\0\0\0\0\x6b\x1a\x56\xff\0\0\0\
+\0\x69\xa1\xd2\xff\0\0\0\0\x6b\x1a\x58\xff\0\0\0\0\x71\xa1\x50\xff\0\0\0\0\x15\
+\x01\xd1\0\0\0\0\0\x71\x62\x03\0\0\0\0\0\x67\x02\0\0\x08\0\0\0\x71\x61\x02\0\0\
+\0\0\0\x4f\x12\0\0\0\0\0\0\x71\x63\x04\0\0\0\0\0\x71\x61\x05\0\0\0\0\0\x67\x01\
+\0\0\x08\0\0\0\x4f\x31\0\0\0\0\0\0\x67\x01\0\0\x10\0\0\0\x4f\x21\0\0\0\0\0\0\
+\x71\xa2\x53\xff\0\0\0\0\x15\x02\x03\x01\0\0\0\0\xbf\x12\0\0\0\0\0\0\x57\x02\0\
+\0\x02\0\0\0\x15\x02\0\x01\0\0\0\0\x61\xa1\x5c\xff\0\0\0\0\x63\x1a\xa0\xff\0\0\
+\0\0\x61\xa1\x60\xff\0\0\0\0\x63\x1a\xa4\xff\0\0\0\0\x69\xa1\x56\xff\0\0\0\0\
+\x6b\x1a\xa8\xff\0\0\0\0\x69\xa1\x58\xff\0\0\0\0\x6b\x1a\xaa\xff\0\0\0\0\x05\0\
+\x63\x01\0\0\0\0\xb7\x01\0\0\x01\0\0\0\x73\x1a\x51\xff\0\0\0\0\xb7\x01\0\0\0\0\
+\0\0\x7b\x1a\xf0\xff\0\0\0\0\x7b\x1a\xe8\xff\0\0\0\0\x7b\x1a\xe0\xff\0\0\0\0\
+\x7b\x1a\xd8\xff\0\0\0\0\x7b\x1a\xd0\xff\0\0\0\0\xbf\xa3\0\0\0\0\0\0\x07\x03\0\
+\0\xd0\xff\xff\xff\xb7\x01\0\0\x28\0\0\0\x7b\x1a\x40\xff\0\0\0\0\xbf\x81\0\0\0\
+\0\0\0\xb7\x02\0\0\0\0\0\0\xb7\x04\0\0\x28\0\0\0\xb7\x05\0\0\x01\0\0\0\x85\0\0\
+\0\x44\0\0\0\x67\0\0\0\x20\0\0\0\x77\0\0\0\x20\0\0\0\x55\0\x1d\x01\0\0\0\0\x79\
+\xa1\xe0\xff\0\0\0\0\x63\x1a\x64\xff\0\0\0\0\x77\x01\0\0\x20\0\0\0\x63\x1a\x68\
+\xff\0\0\0\0\x79\xa1\xd8\xff\0\0\0\0\x63\x1a\x5c\xff\0\0\0\0\x77\x01\0\0\x20\0\
+\0\0\x63\x1a\x60\xff\0\0\0\0\x79\xa1\xe8\xff\0\0\0\0\x63\x1a\x6c\xff\0\0\0\0\
+\x77\x01\0\0\x20\0\0\0\x63\x1a\x70\xff\0\0\0\0\x79\xa1\xf0\xff\0\0\0\0\x63\x1a\
+\x74\xff\0\0\0\0\x77\x01\0\0\x20\0\0\0\x63\x1a\x78\xff\0\0\0\0\x71\xa3\xd6\xff\
+\0\0\0\0\x25\x03\x0c\x01\x3c\0\0\0\xb7\x01\0\0\x01\0\0\0\x6f\x31\0\0\0\0\0\0\
+\x18\x02\0\0\x01\0\0\0\0\0\0\0\0\x18\0\x1c\x5f\x21\0\0\0\0\0\0\x55\x01\x01\0\0\
+\0\0\0\x05\0\x05\x01\0\0\0\0\xb7\x01\0\0\0\0\0\0\x6b\x1a\xfe\xff\0\0\0\0\xb7\
+\x01\0\0\x28\0\0\0\x7b\x1a\x40\xff\0\0\0\0\xbf\xa1\0\0\0\0\0\0\x07\x01\0\0\x8c\
+\xff\xff\xff\x7b\x1a\x18\xff\0\0\0\0\xbf\xa1\0\0\0\0\0\0\x07\x01\0\0\x7c\xff\
+\xff\xff\x7b\x1a\x10\xff\0\0\0\0\xb7\x01\0\0\0\0\0\0\x7b\x1a\x30\xff\0\0\0\0\
+\x7b\x7a\x28\xff\0\0\0\0\x7b\x9a\x20\xff\0\0\0\0\x7b\x3a\x38\xff\0\0\0\0\xbf\
+\xa3\0\0\0\0\0\0\x07\x03\0\0\xfe\xff\xff\xff\xbf\x81\0\0\0\0\0\0\x79\xa2\x40\
+\xff\0\0\0\0\xb7\x04\0\0\x02\0\0\0\xb7\x05\0\0\x01\0\0\0\x85\0\0\0\x44\0\0\0\
+\x67\0\0\0\x20\0\0\0\x77\0\0\0\x20\0\0\0\x15\0\x01\0\0\0\0\0\x05\0\x8c\x01\0\0\
+\0\0\x79\xa1\x38\xff\0\0\0\0\x15\x01\x22\0\x3c\0\0\0\x55\x01\x57\0\x2b\0\0\0\
+\xb7\x01\0\0\0\0\0\0\x63\x1a\xf8\xff\0\0\0\0\xbf\xa3\0\0\0\0\0\0\x07\x03\0\0\
+\xf8\xff\xff\xff\xbf\x81\0\0\0\0\0\0\x79\xa2\x40\xff\0\0\0\0\xb7\x04\0\0\x04\0\
+\0\0\xb7\x05\0\0\x01\0\0\0\x85\0\0\0\x44\0\0\0\xbf\x01\0\0\0\0\0\0\x67\x01\0\0\
+\x20\0\0\0\x77\x01\0\0\x20\0\0\0\x55\x01\0\x01\0\0\0\0\x71\xa1\xfa\xff\0\0\0\0\
+\x55\x01\x48\0\x02\0\0\0\x71\xa1\xf9\xff\0\0\0\0\x55\x01\x46\0\x02\0\0\0\x71\
+\xa1\xfb\xff\0\0\0\0\x55\x01\x44\0\x01\0\0\0\x79\xa2\x40\xff\0\0\0\0\x07\x02\0\
+\0\x08\0\0\0\xbf\x81\0\0\0\0\0\0\x79\xa3\x18\xff\0\0\0\0\xb7\x04\0\0\x10\0\0\0\
+\xb7\x05\0\0\x01\0\0\0\x85\0\0\0\x44\0\0\0\xbf\x01\0\0\0\0\0\0\x67\x01\0\0\x20\
+\0\0\0\x77\x01\0\0\x20\0\0\0\x55\x01\xef\0\0\0\0\0\xb7\x01\0\0\x01\0\0\0\x73\
+\x1a\x55\xff\0\0\0\0\x05\0\x36\0\0\0\0\0\xb7\x01\0\0\0\0\0\0\x6b\x1a\xf8\xff\0\
+\0\0\0\xb7\x07\0\0\x02\0\0\0\xb7\x09\0\0\x1e\0\0\0\x05\0\x1c\0\0\0\0\0\x0f\x72\
+\0\0\0\0\0\0\xbf\x23\0\0\0\0\0\0\x07\x03\0\0\x01\0\0\0\x71\xa4\xff\xff\0\0\0\0\
+\x67\x04\0\0\x03\0\0\0\x3d\x43\x29\0\0\0\0\0\x55\x01\x0f\0\xc9\0\0\0\x79\xa1\
+\x40\xff\0\0\0\0\x0f\x12\0\0\0\0\0\0\x07\x02\0\0\x02\0\0\0\xbf\x81\0\0\0\0\0\0\
+\x79\xa3\x10\xff\0\0\0\0\xb7\x04\0\0\x10\0\0\0\xb7\x05\0\0\x01\0\0\0\x85\0\0\0\
+\x44\0\0\0\xbf\x01\0\0\0\0\0\0\x67\x01\0\0\x20\0\0\0\x77\x01\0\0\x20\0\0\0\x55\
+\x01\xa8\0\0\0\0\0\xb7\x01\0\0\x01\0\0\0\x73\x1a\x54\xff\0\0\0\0\x05\0\x19\0\0\
+\0\0\0\x07\x09\0\0\xff\xff\xff\xff\xbf\x91\0\0\0\0\0\0\x67\x01\0\0\x20\0\0\0\
+\x77\x01\0\0\x20\0\0\0\xbf\x27\0\0\0\0\0\0\x15\x01\x13\0\0\0\0\0\xbf\x72\0\0\0\
+\0\0\0\x79\xa1\x40\xff\0\0\0\0\x0f\x12\0\0\0\0\0\0\xbf\xa3\0\0\0\0\0\0\x07\x03\
+\0\0\xf8\xff\xff\xff\xbf\x81\0\0\0\0\0\0\xb7\x04\0\0\x02\0\0\0\xb7\x05\0\0\x01\
+\0\0\0\x85\0\0\0\x44\0\0\0\xbf\x01\0\0\0\0\0\0\x67\x01\0\0\x20\0\0\0\x77\x01\0\
+\0\x20\0\0\0\x55\x01\x92\0\0\0\0\0\xb7\x02\0\0\x01\0\0\0\x71\xa1\xf8\xff\0\0\0\
+\0\x15\x01\xd4\xff\0\0\0\0\x71\xa2\xf9\xff\0\0\0\0\x07\x02\0\0\x02\0\0\0\x05\0\
+\xd1\xff\0\0\0\0\x79\xa7\x28\xff\0\0\0\0\x79\xa9\x20\xff\0\0\0\0\x71\xa1\xff\
+\xff\0\0\0\0\x67\x01\0\0\x03\0\0\0\x79\xa2\x40\xff\0\0\0\0\x0f\x12\0\0\0\0\0\0\
+\x07\x02\0\0\x08\0\0\0\x7b\x2a\x40\xff\0\0\0\0\x71\xa3\xfe\xff\0\0\0\0\x25\x03\
+\x0e\0\x3c\0\0\0\xb7\x01\0\0\x01\0\0\0\x6f\x31\0\0\0\0\0\0\x18\x02\0\0\x01\0\0\
+\0\0\0\0\0\0\x18\0\x1c\x5f\x21\0\0\0\0\0\0\x55\x01\x01\0\0\0\0\0\x05\0\x07\0\0\
+\0\0\0\x79\xa1\x30\xff\0\0\0\0\x07\x01\0\0\x01\0\0\0\x7b\x1a\x30\xff\0\0\0\0\
+\x67\x01\0\0\x20\0\0\0\x77\x01\0\0\x20\0\0\0\x55\x01\x85\xff\x0b\0\0\0\x05\0\
+\x18\xff\0\0\0\0\x15\x03\xf8\xff\x87\0\0\0\x05\0\xfd\xff\0\0\0\0\x71\xa1\x51\
+\xff\0\0\0\0\x15\x01\x18\x01\0\0\0\0\x71\x62\x03\0\0\0\0\0\x67\x02\0\0\x08\0\0\
+\0\x71\x61\x02\0\0\0\0\0\x4f\x12\0\0\0\0\0\0\x71\x63\x04\0\0\0\0\0\x71\x61\x05\
+\0\0\0\0\0\x67\x01\0\0\x08\0\0\0\x4f\x31\0\0\0\0\0\0\x67\x01\0\0\x10\0\0\0\x4f\
+\x21\0\0\0\0\0\0\x71\xa2\x53\xff\0\0\0\0\x15\x02\x4c\0\0\0\0\0\xbf\x12\0\0\0\0\
+\0\0\x57\x02\0\0\x10\0\0\0\x15\x02\x49\0\0\0\0\0\xbf\xa2\0\0\0\0\0\0\x07\x02\0\
+\0\x5c\xff\xff\xff\x71\xa4\x54\xff\0\0\0\0\xbf\x23\0\0\0\0\0\0\x15\x04\x02\0\0\
+\0\0\0\xbf\xa3\0\0\0\0\0\0\x07\x03\0\0\x7c\xff\xff\xff\x67\x01\0\0\x38\0\0\0\
+\xc7\x01\0\0\x38\0\0\0\x65\x01\x01\0\xff\xff\xff\xff\xbf\x32\0\0\0\0\0\0\xbf\
+\xa3\0\0\0\0\0\0\x07\x03\0\0\x6c\xff\xff\xff\x71\xa5\x55\xff\0\0\0\0\xbf\x34\0\
+\0\0\0\0\0\x15\x05\x02\0\0\0\0\0\xbf\xa4\0\0\0\0\0\0\x07\x04\0\0\x8c\xff\xff\
+\xff\x65\x01\x01\0\xff\xff\xff\xff\xbf\x43\0\0\0\0\0\0\x61\x21\x04\0\0\0\0\0\
+\x67\x01\0\0\x20\0\0\0\x61\x24\0\0\0\0\0\0\x4f\x41\0\0\0\0\0\0\x7b\x1a\xa0\xff\
+\0\0\0\0\x61\x21\x08\0\0\0\0\0\x61\x22\x0c\0\0\0\0\0\x67\x02\0\0\x20\0\0\0\x4f\
+\x12\0\0\0\0\0\0\x7b\x2a\xa8\xff\0\0\0\0\x61\x31\0\0\0\0\0\0\x61\x32\x04\0\0\0\
+\0\0\x61\x34\x08\0\0\0\0\0\x61\x33\x0c\0\0\0\0\0\x69\xa5\x58\xff\0\0\0\0\x6b\
+\x5a\xc2\xff\0\0\0\0\x69\xa5\x56\xff\0\0\0\0\x6b\x5a\xc0\xff\0\0\0\0\x67\x03\0\
+\0\x20\0\0\0\x4f\x43\0\0\0\0\0\0\x7b\x3a\xb8\xff\0\0\0\0\x67\x02\0\0\x20\0\0\0\
+\x4f\x12\0\0\0\0\0\0\x7b\x2a\xb0\xff\0\0\0\0\x05\0\x6c\0\0\0\0\0\x71\xa2\x52\
+\xff\0\0\0\0\x15\x02\x04\0\0\0\0\0\xbf\x12\0\0\0\0\0\0\x57\x02\0\0\x04\0\0\0\
+\x15\x02\x01\0\0\0\0\0\x05\0\xfa\xfe\0\0\0\0\x57\x01\0\0\x01\0\0\0\x15\x01\xd4\
+\0\0\0\0\0\x61\xa1\x5c\xff\0\0\0\0\x63\x1a\xa0\xff\0\0\0\0\x61\xa1\x60\xff\0\0\
+\0\0\x63\x1a\xa4\xff\0\0\0\0\x05\0\x5f\0\0\0\0\0\xb7\x01\0\0\x01\0\0\0\x73\x1a\
+\x52\xff\0\0\0\0\xb7\x01\0\0\0\0\0\0\x7b\x1a\xd0\xff\0\0\0\0\xbf\xa3\0\0\0\0\0\
+\0\x07\x03\0\0\xd0\xff\xff\xff\xbf\x81\0\0\0\0\0\0\x79\xa2\x40\xff\0\0\0\0\xb7\
+\x04\0\0\x08\0\0\0\xb7\x05\0\0\x01\0\0\0\x85\0\0\0\x44\0\0\0\x67\0\0\0\x20\0\0\
+\0\x77\0\0\0\x20\0\0\0\x55\0\xc1\0\0\0\0\0\x05\0\xcf\xfe\0\0\0\0\x71\xa2\x52\
+\xff\0\0\0\0\x15\x02\x1f\0\0\0\0\0\xbf\x12\0\0\0\0\0\0\x57\x02\0\0\x20\0\0\0\
+\x15\x02\x1c\0\0\0\0\0\xbf\xa2\0\0\0\0\0\0\x07\x02\0\0\x5c\xff\xff\xff\x71\xa4\
+\x54\xff\0\0\0\0\xbf\x23\0\0\0\0\0\0\x15\x04\x02\0\0\0\0\0\xbf\xa3\0\0\0\0\0\0\
+\x07\x03\0\0\x7c\xff\xff\xff\x57\x01\0\0\0\x01\0\0\x15\x01\x01\0\0\0\0\0\xbf\
+\x32\0\0\0\0\0\0\xbf\xa3\0\0\0\0\0\0\x07\x03\0\0\x6c\xff\xff\xff\x71\xa5\x55\
+\xff\0\0\0\0\xbf\x34\0\0\0\0\0\0\x15\x05\x02\0\0\0\0\0\xbf\xa4\0\0\0\0\0\0\x07\
+\x04\0\0\x8c\xff\xff\xff\x15\x01\xb4\xff\0\0\0\0\x05\0\xb2\xff\0\0\0\0\xb7\x03\
+\0\0\x3c\0\0\0\x79\xa7\x28\xff\0\0\0\0\x79\xa9\x20\xff\0\0\0\0\x67\0\0\0\x20\0\
+\0\0\x77\0\0\0\x20\0\0\0\x15\0\x9e\xfe\0\0\0\0\x05\0\xa1\0\0\0\0\0\x15\x03\xfa\
+\xfe\x87\0\0\0\x05\0\x9b\xfe\0\0\0\0\xbf\x12\0\0\0\0\0\0\x57\x02\0\0\x08\0\0\0\
+\x15\x02\x9c\0\0\0\0\0\xbf\xa2\0\0\0\0\0\0\x07\x02\0\0\x5c\xff\xff\xff\x71\xa4\
+\x54\xff\0\0\0\0\xbf\x23\0\0\0\0\0\0\x15\x04\x02\0\0\0\0\0\xbf\xa3\0\0\0\0\0\0\
+\x07\x03\0\0\x7c\xff\xff\xff\x57\x01\0\0\x40\0\0\0\x15\x01\x01\0\0\0\0\0\xbf\
+\x32\0\0\0\0\0\0\x61\x23\x04\0\0\0\0\0\x67\x03\0\0\x20\0\0\0\x61\x24\0\0\0\0\0\
+\0\x4f\x43\0\0\0\0\0\0\x7b\x3a\xa0\xff\0\0\0\0\x61\x23\x08\0\0\0\0\0\x61\x22\
+\x0c\0\0\0\0\0\x67\x02\0\0\x20\0\0\0\x4f\x32\0\0\0\0\0\0\x7b\x2a\xa8\xff\0\0\0\
+\0\x15\x01\x0d\0\0\0\0\0\x71\xa1\x55\xff\0\0\0\0\x15\x01\x0b\0\0\0\0\0\x61\xa1\
+\x98\xff\0\0\0\0\x67\x01\0\0\x20\0\0\0\x61\xa2\x94\xff\0\0\0\0\x4f\x21\0\0\0\0\
+\0\0\x7b\x1a\xb8\xff\0\0\0\0\x61\xa1\x90\xff\0\0\0\0\x67\x01\0\0\x20\0\0\0\x61\
+\xa2\x8c\xff\0\0\0\0\x05\0\x0a\0\0\0\0\0\xb7\x03\0\0\x2b\0\0\0\x05\0\xd5\xff\0\
+\0\0\0\x61\xa1\x78\xff\0\0\0\0\x67\x01\0\0\x20\0\0\0\x61\xa2\x74\xff\0\0\0\0\
+\x4f\x21\0\0\0\0\0\0\x7b\x1a\xb8\xff\0\0\0\0\x61\xa1\x70\xff\0\0\0\0\x67\x01\0\
+\0\x20\0\0\0\x61\xa2\x6c\xff\0\0\0\0\x4f\x21\0\0\0\0\0\0\x7b\x1a\xb0\xff\0\0\0\
+\0\xb7\x01\0\0\0\0\0\0\x07\x07\0\0\x04\0\0\0\x61\x93\0\0\0\0\0\0\xb7\x05\0\0\0\
+\0\0\0\x05\0\x4e\0\0\0\0\0\xaf\x52\0\0\0\0\0\0\xbf\x75\0\0\0\0\0\0\x0f\x15\0\0\
+\0\0\0\0\x71\x55\0\0\0\0\0\0\x67\x03\0\0\x01\0\0\0\xbf\x50\0\0\0\0\0\0\x77\0\0\
+\0\x07\0\0\0\x4f\x03\0\0\0\0\0\0\xbf\x40\0\0\0\0\0\0\x67\0\0\0\x39\0\0\0\xc7\0\
+\0\0\x3f\0\0\0\x5f\x30\0\0\0\0\0\0\xaf\x02\0\0\0\0\0\0\xbf\x50\0\0\0\0\0\0\x77\
+\0\0\0\x06\0\0\0\x57\0\0\0\x01\0\0\0\x67\x03\0\0\x01\0\0\0\x4f\x03\0\0\0\0\0\0\
+\xbf\x40\0\0\0\0\0\0\x67\0\0\0\x3a\0\0\0\xc7\0\0\0\x3f\0\0\0\x5f\x30\0\0\0\0\0\
+\0\xaf\x02\0\0\0\0\0\0\x67\x03\0\0\x01\0\0\0\xbf\x50\0\0\0\0\0\0\x77\0\0\0\x05\
+\0\0\0\x57\0\0\0\x01\0\0\0\x4f\x03\0\0\0\0\0\0\xbf\x40\0\0\0\0\0\0\x67\0\0\0\
+\x3b\0\0\0\xc7\0\0\0\x3f\0\0\0\x5f\x30\0\0\0\0\0\0\xaf\x02\0\0\0\0\0\0\x67\x03\
+\0\0\x01\0\0\0\xbf\x50\0\0\0\0\0\0\x77\0\0\0\x04\0\0\0\x57\0\0\0\x01\0\0\0\x4f\
+\x03\0\0\0\0\0\0\xbf\x40\0\0\0\0\0\0\x67\0\0\0\x3c\0\0\0\xc7\0\0\0\x3f\0\0\0\
+\x5f\x30\0\0\0\0\0\0\xaf\x02\0\0\0\0\0\0\xbf\x50\0\0\0\0\0\0\x77\0\0\0\x03\0\0\
+\0\x57\0\0\0\x01\0\0\0\x67\x03\0\0\x01\0\0\0\x4f\x03\0\0\0\0\0\0\xbf\x40\0\0\0\
+\0\0\0\x67\0\0\0\x3d\0\0\0\xc7\0\0\0\x3f\0\0\0\x5f\x30\0\0\0\0\0\0\xaf\x02\0\0\
+\0\0\0\0\xbf\x50\0\0\0\0\0\0\x77\0\0\0\x02\0\0\0\x57\0\0\0\x01\0\0\0\x67\x03\0\
+\0\x01\0\0\0\x4f\x03\0\0\0\0\0\0\xbf\x40\0\0\0\0\0\0\x67\0\0\0\x3e\0\0\0\xc7\0\
+\0\0\x3f\0\0\0\x5f\x30\0\0\0\0\0\0\xaf\x02\0\0\0\0\0\0\xbf\x50\0\0\0\0\0\0\x77\
+\0\0\0\x01\0\0\0\x57\0\0\0\x01\0\0\0\x67\x03\0\0\x01\0\0\0\x4f\x03\0\0\0\0\0\0\
+\x57\x04\0\0\x01\0\0\0\x87\x04\0\0\0\0\0\0\x5f\x34\0\0\0\0\0\0\xaf\x42\0\0\0\0\
+\0\0\x57\x05\0\0\x01\0\0\0\x67\x03\0\0\x01\0\0\0\x4f\x53\0\0\0\0\0\0\x07\x01\0\
+\0\x01\0\0\0\xbf\x25\0\0\0\0\0\0\x15\x01\x0b\0\x24\0\0\0\xbf\xa2\0\0\0\0\0\0\
+\x07\x02\0\0\xa0\xff\xff\xff\x0f\x12\0\0\0\0\0\0\x71\x24\0\0\0\0\0\0\xbf\x40\0\
+\0\0\0\0\0\x67\0\0\0\x38\0\0\0\xc7\0\0\0\x38\0\0\0\xb7\x02\0\0\0\0\0\0\x65\0\
+\xa9\xff\xff\xff\xff\xff\xbf\x32\0\0\0\0\0\0\x05\0\xa7\xff\0\0\0\0\xbf\x21\0\0\
+\0\0\0\0\x67\x01\0\0\x20\0\0\0\x77\x01\0\0\x20\0\0\0\x15\x01\x0e\0\0\0\0\0\x71\
+\x63\x06\0\0\0\0\0\x71\x64\x07\0\0\0\0\0\x67\x04\0\0\x08\0\0\0\x4f\x34\0\0\0\0\
+\0\0\x3f\x41\0\0\0\0\0\0\x2f\x41\0\0\0\0\0\0\x1f\x12\0\0\0\0\0\0\x63\x2a\x50\
+\xff\0\0\0\0\xbf\xa2\0\0\0\0\0\0\x07\x02\0\0\x50\xff\xff\xff\x18\x01\0\0\0\0\0\
+\0\0\0\0\0\0\0\0\0\x85\0\0\0\x01\0\0\0\x55\0\x05\0\0\0\0\0\x71\x61\x08\0\0\0\0\
+\0\x71\x60\x09\0\0\0\0\0\x67\0\0\0\x08\0\0\0\x4f\x10\0\0\0\0\0\0\x95\0\0\0\0\0\
+\0\0\x69\0\0\0\0\0\0\0\x05\0\xfd\xff\0\0\0\0\x02\0\0\0\x04\0\0\0\x0a\0\0\0\x01\
+\0\0\0\0\0\0\0\x02\0\0\0\x04\0\0\0\x28\0\0\0\x01\0\0\0\0\0\0\0\x02\0\0\0\x04\0\
+\0\0\x02\0\0\0\x80\0\0\0\0\0\0\0\x47\x50\x4c\x20\x76\x32\0\0\0\0\0\0\x10\0\0\0\
+\0\0\0\0\x01\x7a\x52\0\x08\x7c\x0b\x01\x0c\0\0\0\x18\0\0\0\x18\0\0\0\0\0\0\0\0\
+\0\0\0\x60\x13\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\
+\0\0\xa0\0\0\0\x04\0\xf1\xff\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\x44\x02\0\0\0\0\
+\x03\0\x20\x02\0\0\0\0\0\0\0\0\0\0\0\0\0\0\x4c\x02\0\0\0\0\x03\0\x98\x12\0\0\0\
+\0\0\0\0\0\0\0\0\0\0\0\x0b\x02\0\0\0\0\x03\0\x28\x13\0\0\0\0\0\0\0\0\0\0\0\0\0\
+\0\xd2\x01\0\0\0\0\x03\0\x48\x13\0\0\0\0\0\0\0\0\0\0\0\0\0\0\xa9\x01\0\0\0\0\
+\x03\0\xe8\x0d\0\0\0\0\0\0\0\0\0\0\0\0\0\0\x61\x01\0\0\0\0\x03\0\x50\x13\0\0\0\
+\0\0\0\0\0\0\0\0\0\0\0\x34\x02\0\0\0\0\x03\0\x28\x02\0\0\0\0\0\0\0\0\0\0\0\0\0\
+\0\x41\x01\0\0\0\0\x03\0\x08\x03\0\0\0\0\0\0\0\0\0\0\0\0\0\0\x19\x01\0\0\0\0\
+\x03\0\x90\x04\0\0\0\0\0\0\0\0\0\0\0\0\0\0\xe9\0\0\0\0\0\x03\0\x20\x0e\0\0\0\0\
+\0\0\0\0\0\0\0\0\0\0\x2c\x02\0\0\0\0\x03\0\xf8\x05\0\0\0\0\0\0\0\0\0\0\0\0\0\0\
+\x03\x02\0\0\0\0\x03\0\x68\x06\0\0\0\0\0\0\0\0\0\0\0\0\0\0\xa1\x01\0\0\0\0\x03\
+\0\xc8\x06\0\0\0\0\0\0\0\0\0\0\0\0\0\0\xfb\x01\0\0\0\0\x03\0\xe8\x07\0\0\0\0\0\
+\0\0\0\0\0\0\0\0\0\xca\x01\0\0\0\0\x03\0\xc0\x08\0\0\0\0\0\0\0\0\0\0\0\0\0\0\
+\x99\x01\0\0\0\0\x03\0\xf0\x08\0\0\0\0\0\0\0\0\0\0\0\0\0\0\x11\x01\0\0\0\0\x03\
+\0\x10\x08\0\0\0\0\0\0\0\0\0\0\0\0\0\0\x6a\x01\0\0\0\0\x03\0\xb8\0\0\0\0\0\0\0\
+\0\0\0\0\0\0\0\0\x24\x02\0\0\0\0\x03\0\x88\x09\0\0\0\0\0\0\0\0\0\0\0\0\0\0\xf3\
+\x01\0\0\0\0\x03\0\x98\x09\0\0\0\0\0\0\0\0\0\0\0\0\0\0\xc2\x01\0\0\0\0\x03\0\
+\x48\x0a\0\0\0\0\0\0\0\0\0\0\0\0\0\0\x59\x01\0\0\0\0\x03\0\x10\x0a\0\0\0\0\0\0\
+\0\0\0\0\0\0\0\0\x39\x01\0\0\0\0\x03\0\x40\x0a\0\0\0\0\0\0\0\0\0\0\0\0\0\0\x09\
+\x01\0\0\0\0\x03\0\x48\x0f\0\0\0\0\0\0\0\0\0\0\0\0\0\0\xf9\0\0\0\0\0\x03\0\0\
+\x0e\0\0\0\0\0\0\0\0\0\0\0\0\0\0\xe1\0\0\0\0\0\x03\0\x18\x0e\0\0\0\0\0\0\0\0\0\
+\0\0\0\0\0\xeb\x01\0\0\0\0\x03\0\xa0\x03\0\0\0\0\0\0\0\0\0\0\0\0\0\0\xba\x01\0\
+\0\0\0\x03\0\xc0\x03\0\0\0\0\0\0\0\0\0\0\0\0\0\0\x91\x01\0\0\0\0\x03\0\xb0\x0c\
+\0\0\0\0\0\0\0\0\0\0\0\0\0\0\xf1\0\0\0\0\0\x03\0\x48\x04\0\0\0\0\0\0\0\0\0\0\0\
+\0\0\0\xd9\0\0\0\0\0\x03\0\x48\x0c\0\0\0\0\0\0\0\0\0\0\0\0\0\0\xe3\x01\0\0\0\0\
+\x03\0\x78\x0c\0\0\0\0\0\0\0\0\0\0\0\0\0\0\x89\x01\0\0\0\0\x03\0\x58\x0a\0\0\0\
+\0\0\0\0\0\0\0\0\0\0\0\xd1\0\0\0\0\0\x03\0\x18\x0b\0\0\0\0\0\0\0\0\0\0\0\0\0\0\
+\x1c\x02\0\0\0\0\x03\0\x38\x0b\0\0\0\0\0\0\0\0\0\0\0\0\0\0\xb2\x01\0\0\0\0\x03\
+\0\x70\x0b\0\0\0\0\0\0\0\0\0\0\0\0\0\0\x81\x01\0\0\0\0\x03\0\x78\x0b\0\0\0\0\0\
+\0\0\0\0\0\0\0\0\0\x51\x01\0\0\0\0\x03\0\x80\x0b\0\0\0\0\0\0\0\0\0\0\0\0\0\0\
+\x31\x01\0\0\0\0\x03\0\x28\x0d\0\0\0\0\0\0\0\0\0\0\0\0\0\0\x3c\x02\0\0\0\0\x03\
+\0\x88\x0d\0\0\0\0\0\0\0\0\0\0\0\0\0\0\xdb\x01\0\0\0\0\x03\0\xa0\x0d\0\0\0\0\0\
+\0\0\0\0\0\0\0\0\0\x79\x01\0\0\0\0\x03\0\xd8\x0d\0\0\0\0\0\0\0\0\0\0\0\0\0\0\
+\x29\x01\0\0\0\0\x03\0\x30\x0e\0\0\0\0\0\0\0\0\0\0\0\0\0\0\xc9\0\0\0\0\0\x03\0\
+\x80\x0e\0\0\0\0\0\0\0\0\0\0\0\0\0\0\xba\0\0\0\0\0\x03\0\xd0\x01\0\0\0\0\0\0\0\
+\0\0\0\0\0\0\0\x14\x02\0\0\0\0\x03\0\x98\x0e\0\0\0\0\0\0\0\0\0\0\0\0\0\0\x71\
+\x01\0\0\0\0\x03\0\x58\x0f\0\0\0\0\0\0\0\0\0\0\0\0\0\0\x49\x01\0\0\0\0\x03\0\
+\x98\x0f\0\0\0\0\0\0\0\0\0\0\0\0\0\0\x21\x01\0\0\0\0\x03\0\xa8\x0f\0\0\0\0\0\0\
+\0\0\0\0\0\0\0\0\x01\x01\0\0\0\0\x03\0\x40\x12\0\0\0\0\0\0\0\0\0\0\0\0\0\0\xc1\
+\0\0\0\0\0\x03\0\xd0\x0f\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\x03\0\x03\0\0\0\0\
+\0\0\0\0\0\0\0\0\0\0\0\0\0\x6b\0\0\0\x11\0\x06\0\0\0\0\0\0\0\0\0\x07\0\0\0\0\0\
+\0\0\x25\0\0\0\x11\0\x05\0\0\0\0\0\0\0\0\0\x14\0\0\0\0\0\0\0\x82\0\0\0\x11\0\
+\x05\0\x28\0\0\0\0\0\0\0\x14\0\0\0\0\0\0\0\x01\0\0\0\x11\0\x05\0\x14\0\0\0\0\0\
+\0\0\x14\0\0\0\0\0\0\0\x40\0\0\0\x12\0\x03\0\0\0\0\0\0\0\0\0\x60\x13\0\0\0\0\0\
+\0\x28\0\0\0\0\0\0\0\x01\0\0\0\x37\0\0\0\x50\0\0\0\0\0\0\0\x01\0\0\0\x39\0\0\0\
+\x08\x13\0\0\0\0\0\0\x01\0\0\0\x38\0\0\0\x1c\0\0\0\0\0\0\0\x01\0\0\0\x35\0\0\0\
+\0\x74\x61\x70\x5f\x72\x73\x73\x5f\x6d\x61\x70\x5f\x74\x6f\x65\x70\x6c\x69\x74\
+\x7a\x5f\x6b\x65\x79\0\x2e\x74\x65\x78\x74\0\x6d\x61\x70\x73\0\x74\x61\x70\x5f\
+\x72\x73\x73\x5f\x6d\x61\x70\x5f\x63\x6f\x6e\x66\x69\x67\x75\x72\x61\x74\x69\
+\x6f\x6e\x73\0\x74\x75\x6e\x5f\x72\x73\x73\x5f\x73\x74\x65\x65\x72\x69\x6e\x67\
+\x5f\x70\x72\x6f\x67\0\x2e\x72\x65\x6c\x74\x75\x6e\x5f\x72\x73\x73\x5f\x73\x74\
+\x65\x65\x72\x69\x6e\x67\0\x5f\x6c\x69\x63\x65\x6e\x73\x65\0\x2e\x72\x65\x6c\
+\x2e\x65\x68\x5f\x66\x72\x61\x6d\x65\0\x74\x61\x70\x5f\x72\x73\x73\x5f\x6d\x61\
+\x70\x5f\x69\x6e\x64\x69\x72\x65\x63\x74\x69\x6f\x6e\x5f\x74\x61\x62\x6c\x65\0\
+\x72\x73\x73\x2e\x62\x70\x66\x2e\x63\0\x2e\x73\x74\x72\x74\x61\x62\0\x2e\x73\
+\x79\x6d\x74\x61\x62\0\x4c\x42\x42\x30\x5f\x39\0\x4c\x42\x42\x30\x5f\x39\x39\0\
+\x4c\x42\x42\x30\x5f\x38\x39\0\x4c\x42\x42\x30\x5f\x36\x39\0\x4c\x42\x42\x30\
+\x5f\x35\x39\0\x4c\x42\x42\x30\x5f\x34\x39\0\x4c\x42\x42\x30\x5f\x31\x39\0\x4c\
+\x42\x42\x30\x5f\x35\x38\0\x4c\x42\x42\x30\x5f\x34\x38\0\x4c\x42\x42\x30\x5f\
+\x39\x37\0\x4c\x42\x42\x30\x5f\x34\x37\0\x4c\x42\x42\x30\x5f\x33\x37\0\x4c\x42\
+\x42\x30\x5f\x31\x37\0\x4c\x42\x42\x30\x5f\x39\x36\0\x4c\x42\x42\x30\x5f\x38\
+\x36\0\x4c\x42\x42\x30\x5f\x37\x36\0\x4c\x42\x42\x30\x5f\x34\x36\0\x4c\x42\x42\
+\x30\x5f\x31\x36\0\x4c\x42\x42\x30\x5f\x39\x35\0\x4c\x42\x42\x30\x5f\x37\x35\0\
+\x4c\x42\x42\x30\x5f\x34\x35\0\x4c\x42\x42\x30\x5f\x31\x30\x35\0\x4c\x42\x42\
+\x30\x5f\x34\0\x4c\x42\x42\x30\x5f\x39\x34\0\x4c\x42\x42\x30\x5f\x38\x34\0\x4c\
+\x42\x42\x30\x5f\x37\x34\0\x4c\x42\x42\x30\x5f\x36\x34\0\x4c\x42\x42\x30\x5f\
+\x35\x34\0\x4c\x42\x42\x30\x5f\x33\x34\0\x4c\x42\x42\x30\x5f\x32\x34\0\x4c\x42\
+\x42\x30\x5f\x31\x30\x34\0\x4c\x42\x42\x30\x5f\x37\x33\0\x4c\x42\x42\x30\x5f\
+\x35\x33\0\x4c\x42\x42\x30\x5f\x34\x33\0\x4c\x42\x42\x30\x5f\x33\x33\0\x4c\x42\
+\x42\x30\x5f\x31\x30\x33\0\x4c\x42\x42\x30\x5f\x38\x32\0\x4c\x42\x42\x30\x5f\
+\x36\x32\0\x4c\x42\x42\x30\x5f\x35\x32\0\x4c\x42\x42\x30\x5f\x34\x32\0\x4c\x42\
+\x42\x30\x5f\x33\x32\0\x4c\x42\x42\x30\x5f\x32\x32\0\x4c\x42\x42\x30\x5f\x31\
+\x30\x32\0\x4c\x42\x42\x30\x5f\x39\x31\0\x4c\x42\x42\x30\x5f\x37\x31\0\x4c\x42\
+\x42\x30\x5f\x34\x31\0\x4c\x42\x42\x30\x5f\x32\x31\0\x4c\x42\x42\x30\x5f\x31\
+\x31\0\x4c\x42\x42\x30\x5f\x38\x30\0\x4c\x42\x42\x30\x5f\x31\x30\0\x4c\x42\x42\
+\x30\x5f\x31\x30\x30\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\
+\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\
+\xaa\0\0\0\x03\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\xe0\x19\0\0\0\0\0\0\x55\
+\x02\0\0\0\0\0\0\0\0\0\0\0\0\0\0\x01\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\x1a\0\0\0\
+\x01\0\0\0\x06\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\x40\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\
+\0\0\0\0\0\0\0\0\x04\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\x5a\0\0\0\x01\0\0\0\x06\0\0\
+\0\0\0\0\0\0\0\0\0\0\0\0\0\x40\0\0\0\0\0\0\0\x60\x13\0\0\0\0\0\0\0\0\0\0\0\0\0\
+\0\x08\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\x56\0\0\0\x09\0\0\0\0\0\0\0\0\0\0\0\0\0\0\
+\0\0\0\0\0\xa0\x19\0\0\0\0\0\0\x30\0\0\0\0\0\0\0\x09\0\0\0\x03\0\0\0\x08\0\0\0\
+\0\0\0\0\x10\0\0\0\0\0\0\0\x20\0\0\0\x01\0\0\0\x03\0\0\0\0\0\0\0\0\0\0\0\0\0\0\
+\0\xa0\x13\0\0\0\0\0\0\x3c\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\x04\0\0\0\0\0\0\0\0\0\
+\0\0\0\0\0\0\x6c\0\0\0\x01\0\0\0\x03\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\xdc\x13\0\0\
+\0\0\0\0\x07\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\x01\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\
+\x78\0\0\0\x01\0\0\0\x02\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\xe8\x13\0\0\0\0\0\0\x30\
+\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\x08\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\x74\0\0\0\x09\
+\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\xd0\x19\0\0\0\0\0\0\x10\0\0\0\0\0\0\0\
+\x09\0\0\0\x07\0\0\0\x08\0\0\0\0\0\0\0\x10\0\0\0\0\0\0\0\xb2\0\0\0\x02\0\0\0\0\
+\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\x18\x14\0\0\0\0\0\0\x88\x05\0\0\0\0\0\0\x01\0\0\
+\0\x36\0\0\0\x08\0\0\0\0\0\0\0\x18\0\0\0\0\0\0\0";
+
+ return 0;
+err:
+ bpf_object__destroy_skeleton(s);
+ return -1;
+}
+
+#endif /* __RSS_BPF_SKEL_H__ */
diff --git a/ebpf/trace-events b/ebpf/trace-events
new file mode 100644
index 0000000000..411b1e2be3
--- /dev/null
+++ b/ebpf/trace-events
@@ -0,0 +1,4 @@
+# See docs/devel/tracing.txt for syntax documentation.
+
+# ebpf-rss.c
+ebpf_error(const char *s1, const char *s2) "error in %s: %s"
diff --git a/ebpf/trace.h b/ebpf/trace.h
new file mode 100644
index 0000000000..ad570e6691
--- /dev/null
+++ b/ebpf/trace.h
@@ -0,0 +1,2 @@
+#include "trace/trace-ebpf.h"
+
diff --git a/meson.build b/meson.build
index a7d2dd429d..bc97d93338 100644
--- a/meson.build
+++ b/meson.build
@@ -1016,6 +1016,9 @@ if not get_option('fuse_lseek').disabled()
endif
endif
+# libbpf
+libbpf = dependency('libbpf', required: get_option('bpf'))
+
if get_option('cfi')
cfi_flags=[]
# Check for dependency on LTO
@@ -1115,6 +1118,7 @@ endif
config_host_data.set('CONFIG_GTK', gtk.found())
config_host_data.set('CONFIG_LIBATTR', have_old_libattr)
config_host_data.set('CONFIG_LIBCAP_NG', libcap_ng.found())
+config_host_data.set('CONFIG_EBPF', libbpf.found())
config_host_data.set('CONFIG_LIBISCSI', libiscsi.found())
config_host_data.set('CONFIG_LIBNFS', libnfs.found())
config_host_data.set('CONFIG_RBD', rbd.found())
@@ -1785,6 +1789,7 @@ if have_system
'backends',
'backends/tpm',
'chardev',
+ 'ebpf',
'hw/9pfs',
'hw/acpi',
'hw/adc',
@@ -1957,6 +1962,9 @@ subdir('accel')
subdir('plugins')
subdir('bsd-user')
subdir('linux-user')
+subdir('ebpf')
+
+common_ss.add(libbpf)
bsd_user_ss.add(files('gdbstub.c'))
specific_ss.add_all(when: 'CONFIG_BSD_USER', if_true: bsd_user_ss)
@@ -2661,6 +2669,7 @@ summary_info += {'RDMA support': config_host.has_key('CONFIG_RDMA')}
summary_info += {'PVRDMA support': config_host.has_key('CONFIG_PVRDMA')}
summary_info += {'fdt support': fdt_opt == 'disabled' ? false : fdt_opt}
summary_info += {'libcap-ng support': libcap_ng.found()}
+summary_info += {'bpf support': libbpf.found()}
# TODO: add back protocol and server version
summary_info += {'spice support': config_host.has_key('CONFIG_SPICE')}
summary_info += {'rbd support': rbd.found()}
diff --git a/meson_options.txt b/meson_options.txt
index 9734019995..58bc80ecfb 100644
--- a/meson_options.txt
+++ b/meson_options.txt
@@ -56,6 +56,8 @@ option('bzip2', type : 'feature', value : 'auto',
description: 'bzip2 support for DMG images')
option('cap_ng', type : 'feature', value : 'auto',
description: 'cap_ng support')
+option('bpf', type : 'feature', value : 'auto',
+ description: 'eBPF support')
option('cocoa', type : 'feature', value : 'auto',
description: 'Cocoa user interface (macOS only)')
option('curl', type : 'feature', value : 'auto',
--
2.31.0
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH v5 5/7] virtio-net: Added eBPF RSS to virtio-net.
2021-03-25 15:35 [PATCH v5 0/7] eBPF RSS support for virtio-net Andrew Melnychenko
` (3 preceding siblings ...)
2021-03-25 15:35 ` [PATCH v5 4/7] ebpf: Added eBPF RSS loader Andrew Melnychenko
@ 2021-03-25 15:35 ` Andrew Melnychenko
2021-03-25 15:35 ` [PATCH v5 6/7] docs: Added eBPF documentation Andrew Melnychenko
` (4 subsequent siblings)
9 siblings, 0 replies; 15+ messages in thread
From: Andrew Melnychenko @ 2021-03-25 15:35 UTC (permalink / raw)
To: jasowang, mst; +Cc: yan, yuri.benditovich, berrange, qemu-devel
From: Andrew <andrew@daynix.com>
When RSS is enabled the device tries to load the eBPF program
to select RX virtqueue in the TUN. If eBPF can be loaded
the RSS will function also with vhost (works with kernel 5.8 and later).
Software RSS is used as a fallback with vhost=off when eBPF can't be loaded
or when hash population requested by the guest.
Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com>
Signed-off-by: Andrew Melnychenko <andrew@daynix.com>
---
hw/net/vhost_net.c | 3 +
hw/net/virtio-net.c | 115 ++++++++++++++++++++++++++++++++-
include/hw/virtio/virtio-net.h | 4 ++
net/vhost-vdpa.c | 2 +
4 files changed, 121 insertions(+), 3 deletions(-)
diff --git a/hw/net/vhost_net.c b/hw/net/vhost_net.c
index 24d555e764..44c1ed92dc 100644
--- a/hw/net/vhost_net.c
+++ b/hw/net/vhost_net.c
@@ -45,6 +45,7 @@ static const int kernel_feature_bits[] = {
VIRTIO_NET_F_MTU,
VIRTIO_F_IOMMU_PLATFORM,
VIRTIO_F_RING_PACKED,
+ VIRTIO_NET_F_HASH_REPORT,
VHOST_INVALID_FEATURE_BIT
};
@@ -71,6 +72,8 @@ static const int user_feature_bits[] = {
VIRTIO_NET_F_MTU,
VIRTIO_F_IOMMU_PLATFORM,
VIRTIO_F_RING_PACKED,
+ VIRTIO_NET_F_RSS,
+ VIRTIO_NET_F_HASH_REPORT,
/* This bit implies RARP isn't sent by QEMU out of band */
VIRTIO_NET_F_GUEST_ANNOUNCE,
diff --git a/hw/net/virtio-net.c b/hw/net/virtio-net.c
index 96a3cc8357..9ac0bfd2cb 100644
--- a/hw/net/virtio-net.c
+++ b/hw/net/virtio-net.c
@@ -737,8 +737,9 @@ static uint64_t virtio_net_get_features(VirtIODevice *vdev, uint64_t features,
return features;
}
- virtio_clear_feature(&features, VIRTIO_NET_F_RSS);
- virtio_clear_feature(&features, VIRTIO_NET_F_HASH_REPORT);
+ if (!ebpf_rss_is_loaded(&n->ebpf_rss)) {
+ virtio_clear_feature(&features, VIRTIO_NET_F_RSS);
+ }
features = vhost_net_get_features(get_vhost_net(nc->peer), features);
vdev->backend_features = features;
@@ -1163,12 +1164,79 @@ static int virtio_net_handle_announce(VirtIONet *n, uint8_t cmd,
}
}
+static void virtio_net_detach_epbf_rss(VirtIONet *n);
+
static void virtio_net_disable_rss(VirtIONet *n)
{
if (n->rss_data.enabled) {
trace_virtio_net_rss_disable();
}
n->rss_data.enabled = false;
+
+ virtio_net_detach_epbf_rss(n);
+}
+
+static bool virtio_net_attach_ebpf_to_backend(NICState *nic, int prog_fd)
+{
+ NetClientState *nc = qemu_get_peer(qemu_get_queue(nic), 0);
+ if (nc == NULL || nc->info->set_steering_ebpf == NULL) {
+ return false;
+ }
+
+ return nc->info->set_steering_ebpf(nc, prog_fd);
+}
+
+static void rss_data_to_rss_config(struct VirtioNetRssData *data,
+ struct EBPFRSSConfig *config)
+{
+ config->redirect = data->redirect;
+ config->populate_hash = data->populate_hash;
+ config->hash_types = data->hash_types;
+ config->indirections_len = data->indirections_len;
+ config->default_queue = data->default_queue;
+}
+
+static bool virtio_net_attach_epbf_rss(VirtIONet *n)
+{
+ struct EBPFRSSConfig config = {};
+
+ if (!ebpf_rss_is_loaded(&n->ebpf_rss)) {
+ return false;
+ }
+
+ rss_data_to_rss_config(&n->rss_data, &config);
+
+ if (!ebpf_rss_set_all(&n->ebpf_rss, &config,
+ n->rss_data.indirections_table, n->rss_data.key)) {
+ return false;
+ }
+
+ if (!virtio_net_attach_ebpf_to_backend(n->nic, n->ebpf_rss.program_fd)) {
+ return false;
+ }
+
+ return true;
+}
+
+static void virtio_net_detach_epbf_rss(VirtIONet *n)
+{
+ virtio_net_attach_ebpf_to_backend(n->nic, -1);
+}
+
+static bool virtio_net_load_ebpf(VirtIONet *n)
+{
+ if (!virtio_net_attach_ebpf_to_backend(n->nic, -1)) {
+ /* backend does't support steering ebpf */
+ return false;
+ }
+
+ return ebpf_rss_load(&n->ebpf_rss);
+}
+
+static void virtio_net_unload_ebpf(VirtIONet *n)
+{
+ virtio_net_attach_ebpf_to_backend(n->nic, -1);
+ ebpf_rss_unload(&n->ebpf_rss);
}
static uint16_t virtio_net_handle_rss(VirtIONet *n,
@@ -1283,6 +1351,25 @@ static uint16_t virtio_net_handle_rss(VirtIONet *n,
goto error;
}
n->rss_data.enabled = true;
+
+ if (!n->rss_data.populate_hash) {
+ if (!virtio_net_attach_epbf_rss(n)) {
+ /* EBPF must be loaded for vhost */
+ if (get_vhost_net(qemu_get_queue(n->nic)->peer)) {
+ warn_report("Can't load eBPF RSS for vhost");
+ goto error;
+ }
+ /* fallback to software RSS */
+ warn_report("Can't load eBPF RSS - fallback to software RSS");
+ n->rss_data.enabled_software_rss = true;
+ }
+ } else {
+ /* use software RSS for hash populating */
+ /* and detach eBPF if was loaded before */
+ virtio_net_detach_epbf_rss(n);
+ n->rss_data.enabled_software_rss = true;
+ }
+
trace_virtio_net_rss_enable(n->rss_data.hash_types,
n->rss_data.indirections_len,
temp.b);
@@ -1668,7 +1755,7 @@ static ssize_t virtio_net_receive_rcu(NetClientState *nc, const uint8_t *buf,
return -1;
}
- if (!no_rss && n->rss_data.enabled) {
+ if (!no_rss && n->rss_data.enabled && n->rss_data.enabled_software_rss) {
int index = virtio_net_process_rss(nc, buf, size);
if (index >= 0) {
NetClientState *nc2 = qemu_get_subqueue(n->nic, index);
@@ -2772,6 +2859,18 @@ static int virtio_net_post_load_device(void *opaque, int version_id)
}
if (n->rss_data.enabled) {
+ n->rss_data.enabled_software_rss = n->rss_data.populate_hash;
+ if (!n->rss_data.populate_hash) {
+ if (!virtio_net_attach_epbf_rss(n)) {
+ if (get_vhost_net(qemu_get_queue(n->nic)->peer)) {
+ warn_report("Can't post-load eBPF RSS for vhost");
+ } else {
+ warn_report("Can't post-load eBPF RSS - fallback to software RSS");
+ n->rss_data.enabled_software_rss = true;
+ }
+ }
+ }
+
trace_virtio_net_rss_enable(n->rss_data.hash_types,
n->rss_data.indirections_len,
sizeof(n->rss_data.key));
@@ -3348,6 +3447,10 @@ static void virtio_net_device_realize(DeviceState *dev, Error **errp)
n->qdev = dev;
net_rx_pkt_init(&n->rx_pkt, false);
+
+ if (virtio_has_feature(n->host_features, VIRTIO_NET_F_RSS)) {
+ virtio_net_load_ebpf(n);
+ }
}
static void virtio_net_device_unrealize(DeviceState *dev)
@@ -3356,6 +3459,10 @@ static void virtio_net_device_unrealize(DeviceState *dev)
VirtIONet *n = VIRTIO_NET(dev);
int i, max_queues;
+ if (virtio_has_feature(n->host_features, VIRTIO_NET_F_RSS)) {
+ virtio_net_unload_ebpf(n);
+ }
+
/* This will stop vhost backend if appropriate. */
virtio_net_set_status(vdev, 0);
@@ -3398,6 +3505,8 @@ static void virtio_net_instance_init(Object *obj)
device_add_bootindex_property(obj, &n->nic_conf.bootindex,
"bootindex", "/ethernet-phy@0",
DEVICE(n));
+
+ ebpf_rss_init(&n->ebpf_rss);
}
static int virtio_net_pre_save(void *opaque)
diff --git a/include/hw/virtio/virtio-net.h b/include/hw/virtio/virtio-net.h
index 7e96d193aa..824a69c23f 100644
--- a/include/hw/virtio/virtio-net.h
+++ b/include/hw/virtio/virtio-net.h
@@ -21,6 +21,8 @@
#include "qemu/option_int.h"
#include "qom/object.h"
+#include "ebpf/ebpf_rss.h"
+
#define TYPE_VIRTIO_NET "virtio-net-device"
OBJECT_DECLARE_SIMPLE_TYPE(VirtIONet, VIRTIO_NET)
@@ -130,6 +132,7 @@ typedef struct VirtioNetRscChain {
typedef struct VirtioNetRssData {
bool enabled;
+ bool enabled_software_rss;
bool redirect;
bool populate_hash;
uint32_t hash_types;
@@ -209,6 +212,7 @@ struct VirtIONet {
Notifier migration_state;
VirtioNetRssData rss_data;
struct NetRxPkt *rx_pkt;
+ struct EBPFRSSContext ebpf_rss;
};
void virtio_net_set_netclient_name(VirtIONet *n, const char *name,
diff --git a/net/vhost-vdpa.c b/net/vhost-vdpa.c
index 5a28bbcd7b..b5bff4032c 100644
--- a/net/vhost-vdpa.c
+++ b/net/vhost-vdpa.c
@@ -54,6 +54,8 @@ const int vdpa_feature_bits[] = {
VIRTIO_NET_F_MTU,
VIRTIO_F_IOMMU_PLATFORM,
VIRTIO_F_RING_PACKED,
+ VIRTIO_NET_F_RSS,
+ VIRTIO_NET_F_HASH_REPORT,
VIRTIO_NET_F_GUEST_ANNOUNCE,
VIRTIO_NET_F_STATUS,
VHOST_INVALID_FEATURE_BIT
--
2.31.0
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH v5 6/7] docs: Added eBPF documentation.
2021-03-25 15:35 [PATCH v5 0/7] eBPF RSS support for virtio-net Andrew Melnychenko
` (4 preceding siblings ...)
2021-03-25 15:35 ` [PATCH v5 5/7] virtio-net: Added eBPF RSS to virtio-net Andrew Melnychenko
@ 2021-03-25 15:35 ` Andrew Melnychenko
2021-03-25 15:35 ` [PATCH v5 7/7] MAINTAINERS: Added eBPF maintainers information Andrew Melnychenko
` (3 subsequent siblings)
9 siblings, 0 replies; 15+ messages in thread
From: Andrew Melnychenko @ 2021-03-25 15:35 UTC (permalink / raw)
To: jasowang, mst; +Cc: yan, yuri.benditovich, berrange, qemu-devel
From: Andrew <andrew@daynix.com>
Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com>
Signed-off-by: Andrew Melnychenko <andrew@daynix.com>
---
docs/devel/ebpf_rss.rst | 125 ++++++++++++++++++++++++++++++++++++++++
docs/devel/index.rst | 1 +
2 files changed, 126 insertions(+)
create mode 100644 docs/devel/ebpf_rss.rst
diff --git a/docs/devel/ebpf_rss.rst b/docs/devel/ebpf_rss.rst
new file mode 100644
index 0000000000..e00962577a
--- /dev/null
+++ b/docs/devel/ebpf_rss.rst
@@ -0,0 +1,125 @@
+===========================
+eBPF RSS virtio-net support
+===========================
+
+RSS(Receive Side Scaling) is used to distribute network packets to guest virtqueues
+by calculating packet hash. Usually every queue is processed then by a specific guest CPU core.
+
+For now there are 2 RSS implementations in qemu:
+- 'in-qemu' RSS (functions if qemu receives network packets, i.e. vhost=off)
+- eBPF RSS (can function with also with vhost=on)
+
+eBPF support (CONFIG_EBPF) is enabled by 'configure' script.
+To enable eBPF RSS support use './configure --enable-bpf'.
+
+If steering BPF is not set for kernel's TUN module, the TUN uses automatic selection
+of rx virtqueue based on lookup table built according to calculated symmetric hash
+of transmitted packets.
+If steering BPF is set for TUN the BPF code calculates the hash of packet header and
+returns the virtqueue number to place the packet to.
+
+Simplified decision formula:
+
+.. code:: C
+
+ queue_index = indirection_table[hash(<packet data>)%<indirection_table size>]
+
+
+Not for all packets, the hash can/should be calculated.
+
+Note: currently, eBPF RSS does not support hash reporting.
+
+eBPF RSS turned on by different combinations of vhost-net, vitrio-net and tap configurations:
+
+- eBPF is used:
+
+ tap,vhost=off & virtio-net-pci,rss=on,hash=off
+
+- eBPF is used:
+
+ tap,vhost=on & virtio-net-pci,rss=on,hash=off
+
+- 'in-qemu' RSS is used:
+
+ tap,vhost=off & virtio-net-pci,rss=on,hash=on
+
+- eBPF is used, hash population feature is not reported to the guest:
+
+ tap,vhost=on & virtio-net-pci,rss=on,hash=on
+
+If CONFIG_EBPF is not set then only 'in-qemu' RSS is supported.
+Also 'in-qemu' RSS, as a fallback, is used if the eBPF program failed to load or set to TUN.
+
+RSS eBPF program
+----------------
+
+RSS program located in ebpf/rss.bpf.skeleton.h generated by bpftool.
+So the program is part of the qemu binary.
+Initially, the eBPF program was compiled by clang and source code located at tools/ebpf/rss.bpf.c.
+Prerequisites to recompile the eBPF program (regenerate ebpf/rss.bpf.skeleton.h):
+
+ llvm, clang, kernel source tree, bpftool
+ Adjust Makefile.ebpf to reflect the location of the kernel source tree
+
+ $ cd tools/ebpf
+ $ make -f Makefile.ebpf
+
+Current eBPF RSS implementation uses 'bounded loops' with 'backward jump instructions' which present in the last kernels.
+Overall eBPF RSS works on kernels 5.8+.
+
+eBPF RSS implementation
+-----------------------
+
+eBPF RSS loading functionality located in ebpf/ebpf_rss.c and ebpf/ebpf_rss.h.
+
+The `struct EBPFRSSContext` structure that holds 4 file descriptors:
+
+- ctx - pointer of the libbpf context.
+- program_fd - file descriptor of the eBPF RSS program.
+- map_configuration - file descriptor of the 'configuration' map. This map contains one element of 'struct EBPFRSSConfig'. This configuration determines eBPF program behavior.
+- map_toeplitz_key - file descriptor of the 'Toeplitz key' map. One element of the 40byte key prepared for the hashing algorithm.
+- map_indirections_table - 128 elements of queue indexes.
+
+`struct EBPFRSSConfig` fields:
+
+- redirect - "boolean" value, should the hash be calculated, on false - `default_queue` would be used as the final decision.
+- populate_hash - for now, not used. eBPF RSS doesn't support hash reporting.
+- hash_types - binary mask of different hash types. See `VIRTIO_NET_RSS_HASH_TYPE_*` defines. If for packet hash should not be calculated - `default_queue` would be used.
+- indirections_len - length of the indirections table, maximum 128.
+- default_queue - the queue index that used for packet that shouldn't be hashed. For some packets, the hash can't be calculated(g.e ARP).
+
+Functions:
+
+- `ebpf_rss_init()` - sets ctx to NULL, which indicates that EBPFRSSContext is not loaded.
+- `ebpf_rss_load()` - creates 3 maps and loads eBPF program from the rss.bpf.skeleton.h. Returns 'true' on success. After that, program_fd can be used to set steering for TAP.
+- `ebpf_rss_set_all()` - sets values for eBPF maps. `indirections_table` length is in EBPFRSSConfig. `toeplitz_key` is VIRTIO_NET_RSS_MAX_KEY_SIZE aka 40 bytes array.
+- `ebpf_rss_unload()` - close all file descriptors and set ctx to NULL.
+
+Simplified eBPF RSS workflow:
+
+.. code:: C
+
+ struct EBPFRSSConfig config;
+ config.redirect = 1;
+ config.hash_types = VIRTIO_NET_RSS_HASH_TYPE_UDPv4 | VIRTIO_NET_RSS_HASH_TYPE_TCPv4;
+ config.indirections_len = VIRTIO_NET_RSS_MAX_TABLE_LEN;
+ config.default_queue = 0;
+
+ uint16_t table[VIRTIO_NET_RSS_MAX_TABLE_LEN] = {...};
+ uint8_t key[VIRTIO_NET_RSS_MAX_KEY_SIZE] = {...};
+
+ struct EBPFRSSContext ctx;
+ ebpf_rss_init(&ctx);
+ ebpf_rss_load(&ctx);
+ ebpf_rss_set_all(&ctx, &config, table, key);
+ if (net_client->info->set_steering_ebpf != NULL) {
+ net_client->info->set_steering_ebpf(net_client, ctx->program_fd);
+ }
+ ...
+ ebpf_unload(&ctx);
+
+
+NetClientState SetSteeringEBPF()
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+For now, `set_steering_ebpf()` method supported by Linux TAP NetClientState. The method requires an eBPF program file descriptor as an argument.
diff --git a/docs/devel/index.rst b/docs/devel/index.rst
index 7c424ea6d7..dd732a627c 100644
--- a/docs/devel/index.rst
+++ b/docs/devel/index.rst
@@ -40,3 +40,4 @@ Contents:
qom
block-coroutine-wrapper
multi-process
+ ebpf_rss
--
2.31.0
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH v5 7/7] MAINTAINERS: Added eBPF maintainers information.
2021-03-25 15:35 [PATCH v5 0/7] eBPF RSS support for virtio-net Andrew Melnychenko
` (5 preceding siblings ...)
2021-03-25 15:35 ` [PATCH v5 6/7] docs: Added eBPF documentation Andrew Melnychenko
@ 2021-03-25 15:35 ` Andrew Melnychenko
2021-03-25 15:58 ` [PATCH v5 0/7] eBPF RSS support for virtio-net no-reply
` (2 subsequent siblings)
9 siblings, 0 replies; 15+ messages in thread
From: Andrew Melnychenko @ 2021-03-25 15:35 UTC (permalink / raw)
To: jasowang, mst; +Cc: yan, yuri.benditovich, berrange, qemu-devel
From: Andrew <andrew@daynix.com>
Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com>
Signed-off-by: Andrew Melnychenko <andrew@daynix.com>
---
MAINTAINERS | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/MAINTAINERS b/MAINTAINERS
index 5e4be6b667..0f74778ed7 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -3304,6 +3304,14 @@ F: include/hw/remote/proxy-memory-listener.h
F: hw/remote/iohub.c
F: include/hw/remote/iohub.h
+EBPF:
+M: Jason Wang <jasowang@redhat.com>
+R: Andrew Melnychenko <andrew@daynix.com>
+R: Yuri Benditovich <yuri.benditovich@daynix.com>
+S: Maintained
+F: ebpf/*
+F: tools/ebpf/*
+
Build and test automation
-------------------------
Build and test automation, general continuous integration
--
2.31.0
^ permalink raw reply related [flat|nested] 15+ messages in thread
* Re: [PATCH v5 0/7] eBPF RSS support for virtio-net
2021-03-25 15:35 [PATCH v5 0/7] eBPF RSS support for virtio-net Andrew Melnychenko
` (6 preceding siblings ...)
2021-03-25 15:35 ` [PATCH v5 7/7] MAINTAINERS: Added eBPF maintainers information Andrew Melnychenko
@ 2021-03-25 15:58 ` no-reply
2021-04-01 7:22 ` Andrew Melnichenko
2021-04-02 2:56 ` Jason Wang
2021-05-14 13:43 ` Michael S. Tsirkin
9 siblings, 1 reply; 15+ messages in thread
From: no-reply @ 2021-03-25 15:58 UTC (permalink / raw)
To: andrew; +Cc: berrange, mst, jasowang, qemu-devel, yuri.benditovich, yan
Patchew URL: https://patchew.org/QEMU/20210325153529.75831-1-andrew@daynix.com/
Hi,
This series seems to have some coding style problems. See output below for
more information:
Type: series
Message-id: 20210325153529.75831-1-andrew@daynix.com
Subject: [PATCH v5 0/7] eBPF RSS support for virtio-net
=== TEST SCRIPT BEGIN ===
#!/bin/bash
git rev-parse base > /dev/null || exit 0
git config --local diff.renamelimit 0
git config --local diff.renames True
git config --local diff.algorithm histogram
./scripts/checkpatch.pl --mailback base..
=== TEST SCRIPT END ===
Updating 3c8cf5a9c21ff8782164d1def7f44bd888713384
Switched to a new branch 'test'
ad293ca MAINTAINERS: Added eBPF maintainers information.
57b0f9a docs: Added eBPF documentation.
043dbde virtio-net: Added eBPF RSS to virtio-net.
aa652c0 ebpf: Added eBPF RSS loader.
9f24275 ebpf: Added eBPF RSS program.
6a33681 net: Added SetSteeringEBPF method for NetClientState.
ad82041 net/tap: Added TUNSETSTEERINGEBPF code.
=== OUTPUT BEGIN ===
1/7 Checking commit ad820417b22d (net/tap: Added TUNSETSTEERINGEBPF code.)
2/7 Checking commit 6a33681ca4bf (net: Added SetSteeringEBPF method for NetClientState.)
3/7 Checking commit 9f24275a1eef (ebpf: Added eBPF RSS program.)
Use of uninitialized value $acpi_testexpected in string eq at ./scripts/checkpatch.pl line 1529.
WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
#22:
new file mode 100755
WARNING: line over 80 characters
#210: FILE: tools/ebpf/rss.bpf.c:156:
+ * According to https://www.iana.org/assignments/ipv6-parameters/ipv6-parameters.xhtml
WARNING: line over 80 characters
#213: FILE: tools/ebpf/rss.bpf.c:159:
+ * Need to choose reasonable amount of maximum extensions/options we may check to find
ERROR: braces {} are necessary for all arms of this statement
#235: FILE: tools/ebpf/rss.bpf.c:181:
+ if (err)
[...]
ERROR: braces {} are necessary for all arms of this statement
#243: FILE: tools/ebpf/rss.bpf.c:189:
+ if (err)
[...]
ERROR: braces {} are necessary for all arms of this statement
#254: FILE: tools/ebpf/rss.bpf.c:200:
+ if (err)
[...]
ERROR: braces {} are necessary for all arms of this statement
#271: FILE: tools/ebpf/rss.bpf.c:217:
+ if (err)
[...]
WARNING: line over 80 characters
#283: FILE: tools/ebpf/rss.bpf.c:229:
+ *l4_offset + opt_offset + offsetof(struct ipv6_destopt_hao, addr),
ERROR: braces {} are necessary for all arms of this statement
#286: FILE: tools/ebpf/rss.bpf.c:232:
+ if (err)
[...]
ERROR: braces {} are necessary for all arms of this statement
#316: FILE: tools/ebpf/rss.bpf.c:262:
+ if (err)
[...]
ERROR: braces {} are necessary for all arms of this statement
#330: FILE: tools/ebpf/rss.bpf.c:276:
+ if (err)
[...]
ERROR: braces {} are necessary for all arms of this statement
#359: FILE: tools/ebpf/rss.bpf.c:305:
+ if (err)
[...]
ERROR: braces {} are necessary for all arms of this statement
#373: FILE: tools/ebpf/rss.bpf.c:319:
+ if (err)
[...]
ERROR: braces {} are necessary for all arms of this statement
#383: FILE: tools/ebpf/rss.bpf.c:329:
+ if (err)
[...]
ERROR: braces {} are necessary for all arms of this statement
#394: FILE: tools/ebpf/rss.bpf.c:340:
+ if (err)
[...]
ERROR: braces {} are necessary for all arms of this statement
#405: FILE: tools/ebpf/rss.bpf.c:351:
+ if (err)
[...]
ERROR: braces {} are necessary for all arms of this statement
#429: FILE: tools/ebpf/rss.bpf.c:375:
+ if (err)
[...]
total: 13 errors, 4 warnings, 574 lines checked
Patch 3/7 has style problems, please review. If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
4/7 Checking commit aa652c04e4a0 (ebpf: Added eBPF RSS loader.)
Use of uninitialized value $acpi_testexpected in string eq at ./scripts/checkpatch.pl line 1529.
WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
#71:
new file mode 100644
WARNING: architecture specific defines should be avoided
#353: FILE: ebpf/rss.bpf.skeleton.h:4:
+#ifndef __RSS_BPF_SKEL_H__
ERROR: code indent should never use tabs
#360: FILE: ebpf/rss.bpf.skeleton.h:11:
+^Istruct bpf_object_skeleton *skeleton;$
ERROR: code indent should never use tabs
#361: FILE: ebpf/rss.bpf.skeleton.h:12:
+^Istruct bpf_object *obj;$
ERROR: code indent should never use tabs
#362: FILE: ebpf/rss.bpf.skeleton.h:13:
+^Istruct {$
ERROR: code indent should never use tabs
#363: FILE: ebpf/rss.bpf.skeleton.h:14:
+^I^Istruct bpf_map *tap_rss_map_configurations;$
ERROR: code indent should never use tabs
#364: FILE: ebpf/rss.bpf.skeleton.h:15:
+^I^Istruct bpf_map *tap_rss_map_indirection_table;$
ERROR: code indent should never use tabs
#365: FILE: ebpf/rss.bpf.skeleton.h:16:
+^I^Istruct bpf_map *tap_rss_map_toeplitz_key;$
ERROR: code indent should never use tabs
#366: FILE: ebpf/rss.bpf.skeleton.h:17:
+^I} maps;$
ERROR: code indent should never use tabs
#367: FILE: ebpf/rss.bpf.skeleton.h:18:
+^Istruct {$
ERROR: code indent should never use tabs
#368: FILE: ebpf/rss.bpf.skeleton.h:19:
+^I^Istruct bpf_program *tun_rss_steering_prog;$
ERROR: code indent should never use tabs
#369: FILE: ebpf/rss.bpf.skeleton.h:20:
+^I} progs;$
ERROR: code indent should never use tabs
#370: FILE: ebpf/rss.bpf.skeleton.h:21:
+^Istruct {$
ERROR: code indent should never use tabs
#371: FILE: ebpf/rss.bpf.skeleton.h:22:
+^I^Istruct bpf_link *tun_rss_steering_prog;$
ERROR: code indent should never use tabs
#372: FILE: ebpf/rss.bpf.skeleton.h:23:
+^I} links;$
ERROR: code indent should never use tabs
#378: FILE: ebpf/rss.bpf.skeleton.h:29:
+^Iif (!obj)$
ERROR: braces {} are necessary for all arms of this statement
#378: FILE: ebpf/rss.bpf.skeleton.h:29:
+ if (!obj)
[...]
ERROR: code indent should never use tabs
#379: FILE: ebpf/rss.bpf.skeleton.h:30:
+^I^Ireturn;$
ERROR: code indent should never use tabs
#380: FILE: ebpf/rss.bpf.skeleton.h:31:
+^Iif (obj->skeleton)$
ERROR: braces {} are necessary for all arms of this statement
#380: FILE: ebpf/rss.bpf.skeleton.h:31:
+ if (obj->skeleton)
[...]
ERROR: code indent should never use tabs
#381: FILE: ebpf/rss.bpf.skeleton.h:32:
+^I^Ibpf_object__destroy_skeleton(obj->skeleton);$
ERROR: code indent should never use tabs
#382: FILE: ebpf/rss.bpf.skeleton.h:33:
+^Ifree(obj);$
ERROR: code indent should never use tabs
#391: FILE: ebpf/rss.bpf.skeleton.h:42:
+^Istruct rss_bpf *obj;$
ERROR: code indent should never use tabs
#393: FILE: ebpf/rss.bpf.skeleton.h:44:
+^Iobj = (struct rss_bpf *)calloc(1, sizeof(*obj));$
ERROR: code indent should never use tabs
#394: FILE: ebpf/rss.bpf.skeleton.h:45:
+^Iif (!obj)$
ERROR: braces {} are necessary for all arms of this statement
#394: FILE: ebpf/rss.bpf.skeleton.h:45:
+ if (!obj)
[...]
ERROR: code indent should never use tabs
#395: FILE: ebpf/rss.bpf.skeleton.h:46:
+^I^Ireturn NULL;$
ERROR: code indent should never use tabs
#396: FILE: ebpf/rss.bpf.skeleton.h:47:
+^Iif (rss_bpf__create_skeleton(obj))$
ERROR: braces {} are necessary for all arms of this statement
#396: FILE: ebpf/rss.bpf.skeleton.h:47:
+ if (rss_bpf__create_skeleton(obj))
[...]
ERROR: code indent should never use tabs
#397: FILE: ebpf/rss.bpf.skeleton.h:48:
+^I^Igoto err;$
ERROR: code indent should never use tabs
#398: FILE: ebpf/rss.bpf.skeleton.h:49:
+^Iif (bpf_object__open_skeleton(obj->skeleton, opts))$
ERROR: braces {} are necessary for all arms of this statement
#398: FILE: ebpf/rss.bpf.skeleton.h:49:
+ if (bpf_object__open_skeleton(obj->skeleton, opts))
[...]
ERROR: code indent should never use tabs
#399: FILE: ebpf/rss.bpf.skeleton.h:50:
+^I^Igoto err;$
ERROR: code indent should never use tabs
#401: FILE: ebpf/rss.bpf.skeleton.h:52:
+^Ireturn obj;$
ERROR: code indent should never use tabs
#403: FILE: ebpf/rss.bpf.skeleton.h:54:
+^Irss_bpf__destroy(obj);$
ERROR: code indent should never use tabs
#404: FILE: ebpf/rss.bpf.skeleton.h:55:
+^Ireturn NULL;$
ERROR: code indent should never use tabs
#410: FILE: ebpf/rss.bpf.skeleton.h:61:
+^Ireturn rss_bpf__open_opts(NULL);$
ERROR: code indent should never use tabs
#416: FILE: ebpf/rss.bpf.skeleton.h:67:
+^Ireturn bpf_object__load_skeleton(obj->skeleton);$
ERROR: code indent should never use tabs
#422: FILE: ebpf/rss.bpf.skeleton.h:73:
+^Istruct rss_bpf *obj;$
ERROR: code indent should never use tabs
#424: FILE: ebpf/rss.bpf.skeleton.h:75:
+^Iobj = rss_bpf__open();$
ERROR: code indent should never use tabs
#425: FILE: ebpf/rss.bpf.skeleton.h:76:
+^Iif (!obj)$
ERROR: braces {} are necessary for all arms of this statement
#425: FILE: ebpf/rss.bpf.skeleton.h:76:
+ if (!obj)
[...]
ERROR: code indent should never use tabs
#426: FILE: ebpf/rss.bpf.skeleton.h:77:
+^I^Ireturn NULL;$
ERROR: code indent should never use tabs
#427: FILE: ebpf/rss.bpf.skeleton.h:78:
+^Iif (rss_bpf__load(obj)) {$
ERROR: code indent should never use tabs
#428: FILE: ebpf/rss.bpf.skeleton.h:79:
+^I^Irss_bpf__destroy(obj);$
ERROR: code indent should never use tabs
#429: FILE: ebpf/rss.bpf.skeleton.h:80:
+^I^Ireturn NULL;$
ERROR: code indent should never use tabs
#430: FILE: ebpf/rss.bpf.skeleton.h:81:
+^I}$
ERROR: code indent should never use tabs
#431: FILE: ebpf/rss.bpf.skeleton.h:82:
+^Ireturn obj;$
ERROR: code indent should never use tabs
#437: FILE: ebpf/rss.bpf.skeleton.h:88:
+^Ireturn bpf_object__attach_skeleton(obj->skeleton);$
ERROR: code indent should never use tabs
#443: FILE: ebpf/rss.bpf.skeleton.h:94:
+^Ireturn bpf_object__detach_skeleton(obj->skeleton);$
ERROR: code indent should never use tabs
#449: FILE: ebpf/rss.bpf.skeleton.h:100:
+^Istruct bpf_object_skeleton *s;$
ERROR: code indent should never use tabs
#451: FILE: ebpf/rss.bpf.skeleton.h:102:
+^Is = (struct bpf_object_skeleton *)calloc(1, sizeof(*s));$
ERROR: code indent should never use tabs
#452: FILE: ebpf/rss.bpf.skeleton.h:103:
+^Iif (!s)$
ERROR: braces {} are necessary for all arms of this statement
#452: FILE: ebpf/rss.bpf.skeleton.h:103:
+ if (!s)
[...]
ERROR: code indent should never use tabs
#453: FILE: ebpf/rss.bpf.skeleton.h:104:
+^I^Ireturn -1;$
ERROR: code indent should never use tabs
#454: FILE: ebpf/rss.bpf.skeleton.h:105:
+^Iobj->skeleton = s;$
ERROR: code indent should never use tabs
#456: FILE: ebpf/rss.bpf.skeleton.h:107:
+^Is->sz = sizeof(*s);$
ERROR: code indent should never use tabs
#457: FILE: ebpf/rss.bpf.skeleton.h:108:
+^Is->name = "rss_bpf";$
ERROR: code indent should never use tabs
#458: FILE: ebpf/rss.bpf.skeleton.h:109:
+^Is->obj = &obj->obj;$
ERROR: code indent should never use tabs
#460: FILE: ebpf/rss.bpf.skeleton.h:111:
+^I/* maps */$
ERROR: code indent should never use tabs
#461: FILE: ebpf/rss.bpf.skeleton.h:112:
+^Is->map_cnt = 3;$
ERROR: code indent should never use tabs
#462: FILE: ebpf/rss.bpf.skeleton.h:113:
+^Is->map_skel_sz = sizeof(*s->maps);$
ERROR: code indent should never use tabs
#463: FILE: ebpf/rss.bpf.skeleton.h:114:
+^Is->maps = (struct bpf_map_skeleton *)calloc(s->map_cnt, s->map_skel_sz);$
ERROR: code indent should never use tabs
#464: FILE: ebpf/rss.bpf.skeleton.h:115:
+^Iif (!s->maps)$
ERROR: braces {} are necessary for all arms of this statement
#464: FILE: ebpf/rss.bpf.skeleton.h:115:
+ if (!s->maps)
[...]
ERROR: code indent should never use tabs
#465: FILE: ebpf/rss.bpf.skeleton.h:116:
+^I^Igoto err;$
ERROR: code indent should never use tabs
#467: FILE: ebpf/rss.bpf.skeleton.h:118:
+^Is->maps[0].name = "tap_rss_map_configurations";$
ERROR: code indent should never use tabs
#468: FILE: ebpf/rss.bpf.skeleton.h:119:
+^Is->maps[0].map = &obj->maps.tap_rss_map_configurations;$
ERROR: code indent should never use tabs
#470: FILE: ebpf/rss.bpf.skeleton.h:121:
+^Is->maps[1].name = "tap_rss_map_indirection_table";$
ERROR: code indent should never use tabs
#471: FILE: ebpf/rss.bpf.skeleton.h:122:
+^Is->maps[1].map = &obj->maps.tap_rss_map_indirection_table;$
ERROR: code indent should never use tabs
#473: FILE: ebpf/rss.bpf.skeleton.h:124:
+^Is->maps[2].name = "tap_rss_map_toeplitz_key";$
ERROR: code indent should never use tabs
#474: FILE: ebpf/rss.bpf.skeleton.h:125:
+^Is->maps[2].map = &obj->maps.tap_rss_map_toeplitz_key;$
ERROR: code indent should never use tabs
#476: FILE: ebpf/rss.bpf.skeleton.h:127:
+^I/* programs */$
ERROR: code indent should never use tabs
#477: FILE: ebpf/rss.bpf.skeleton.h:128:
+^Is->prog_cnt = 1;$
ERROR: code indent should never use tabs
#478: FILE: ebpf/rss.bpf.skeleton.h:129:
+^Is->prog_skel_sz = sizeof(*s->progs);$
WARNING: line over 80 characters
#479: FILE: ebpf/rss.bpf.skeleton.h:130:
+ s->progs = (struct bpf_prog_skeleton *)calloc(s->prog_cnt, s->prog_skel_sz);
ERROR: code indent should never use tabs
#479: FILE: ebpf/rss.bpf.skeleton.h:130:
+^Is->progs = (struct bpf_prog_skeleton *)calloc(s->prog_cnt, s->prog_skel_sz);$
ERROR: code indent should never use tabs
#480: FILE: ebpf/rss.bpf.skeleton.h:131:
+^Iif (!s->progs)$
ERROR: braces {} are necessary for all arms of this statement
#480: FILE: ebpf/rss.bpf.skeleton.h:131:
+ if (!s->progs)
[...]
ERROR: code indent should never use tabs
#481: FILE: ebpf/rss.bpf.skeleton.h:132:
+^I^Igoto err;$
ERROR: code indent should never use tabs
#483: FILE: ebpf/rss.bpf.skeleton.h:134:
+^Is->progs[0].name = "tun_rss_steering_prog";$
ERROR: code indent should never use tabs
#484: FILE: ebpf/rss.bpf.skeleton.h:135:
+^Is->progs[0].prog = &obj->progs.tun_rss_steering_prog;$
ERROR: code indent should never use tabs
#485: FILE: ebpf/rss.bpf.skeleton.h:136:
+^Is->progs[0].link = &obj->links.tun_rss_steering_prog;$
ERROR: code indent should never use tabs
#487: FILE: ebpf/rss.bpf.skeleton.h:138:
+^Is->data_sz = 7864;$
ERROR: code indent should never use tabs
#488: FILE: ebpf/rss.bpf.skeleton.h:139:
+^Is->data = (void *)"\$
ERROR: code indent should never use tabs
#766: FILE: ebpf/rss.bpf.skeleton.h:417:
+^Ireturn 0;$
ERROR: code indent should never use tabs
#768: FILE: ebpf/rss.bpf.skeleton.h:419:
+^Ibpf_object__destroy_skeleton(s);$
ERROR: code indent should never use tabs
#769: FILE: ebpf/rss.bpf.skeleton.h:420:
+^Ireturn -1;$
total: 85 errors, 3 warnings, 758 lines checked
Patch 4/7 has style problems, please review. If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
5/7 Checking commit 043dbde56379 (virtio-net: Added eBPF RSS to virtio-net.)
WARNING: line over 80 characters
#185: FILE: hw/net/virtio-net.c:2868:
+ warn_report("Can't post-load eBPF RSS - fallback to software RSS");
total: 0 errors, 1 warnings, 214 lines checked
Patch 5/7 has style problems, please review. If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
6/7 Checking commit 57b0f9a94036 (docs: Added eBPF documentation.)
Use of uninitialized value $acpi_testexpected in string eq at ./scripts/checkpatch.pl line 1529.
WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
#16:
new file mode 100644
total: 0 errors, 1 warnings, 129 lines checked
Patch 6/7 has style problems, please review. If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
7/7 Checking commit ad293ca1c684 (MAINTAINERS: Added eBPF maintainers information.)
=== OUTPUT END ===
Test command exited with code: 1
The full log is available at
http://patchew.org/logs/20210325153529.75831-1-andrew@daynix.com/testing.checkpatch/?type=message.
---
Email generated automatically by Patchew [https://patchew.org/].
Please send your feedback to patchew-devel@redhat.com
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH v5 0/7] eBPF RSS support for virtio-net
2021-03-25 15:58 ` [PATCH v5 0/7] eBPF RSS support for virtio-net no-reply
@ 2021-04-01 7:22 ` Andrew Melnichenko
0 siblings, 0 replies; 15+ messages in thread
From: Andrew Melnichenko @ 2021-04-01 7:22 UTC (permalink / raw)
To: qemu-devel
Cc: Yan Vugenfirer, Yuri Benditovich, Jason Wang, berrange,
Michael S. Tsirkin
[-- Attachment #1: Type: text/plain, Size: 16839 bytes --]
The skeleton is generated file. Style issues with rss.bpf.c would be fixed
in upcoming patches.
On Thu, Mar 25, 2021 at 5:58 PM <no-reply@patchew.org> wrote:
> Patchew URL:
> https://patchew.org/QEMU/20210325153529.75831-1-andrew@daynix.com/
>
>
>
> Hi,
>
> This series seems to have some coding style problems. See output below for
> more information:
>
> Type: series
> Message-id: 20210325153529.75831-1-andrew@daynix.com
> Subject: [PATCH v5 0/7] eBPF RSS support for virtio-net
>
> === TEST SCRIPT BEGIN ===
> #!/bin/bash
> git rev-parse base > /dev/null || exit 0
> git config --local diff.renamelimit 0
> git config --local diff.renames True
> git config --local diff.algorithm histogram
> ./scripts/checkpatch.pl --mailback base..
> === TEST SCRIPT END ===
>
> Updating 3c8cf5a9c21ff8782164d1def7f44bd888713384
> Switched to a new branch 'test'
> ad293ca MAINTAINERS: Added eBPF maintainers information.
> 57b0f9a docs: Added eBPF documentation.
> 043dbde virtio-net: Added eBPF RSS to virtio-net.
> aa652c0 ebpf: Added eBPF RSS loader.
> 9f24275 ebpf: Added eBPF RSS program.
> 6a33681 net: Added SetSteeringEBPF method for NetClientState.
> ad82041 net/tap: Added TUNSETSTEERINGEBPF code.
>
> === OUTPUT BEGIN ===
> 1/7 Checking commit ad820417b22d (net/tap: Added TUNSETSTEERINGEBPF code.)
> 2/7 Checking commit 6a33681ca4bf (net: Added SetSteeringEBPF method for
> NetClientState.)
> 3/7 Checking commit 9f24275a1eef (ebpf: Added eBPF RSS program.)
> Use of uninitialized value $acpi_testexpected in string eq at ./scripts/
> checkpatch.pl line 1529.
> WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
> #22:
> new file mode 100755
>
> WARNING: line over 80 characters
> #210: FILE: tools/ebpf/rss.bpf.c:156:
> + * According to
> https://www.iana.org/assignments/ipv6-parameters/ipv6-parameters.xhtml
>
> WARNING: line over 80 characters
> #213: FILE: tools/ebpf/rss.bpf.c:159:
> + * Need to choose reasonable amount of maximum extensions/options we may
> check to find
>
> ERROR: braces {} are necessary for all arms of this statement
> #235: FILE: tools/ebpf/rss.bpf.c:181:
> + if (err)
> [...]
>
> ERROR: braces {} are necessary for all arms of this statement
> #243: FILE: tools/ebpf/rss.bpf.c:189:
> + if (err)
> [...]
>
> ERROR: braces {} are necessary for all arms of this statement
> #254: FILE: tools/ebpf/rss.bpf.c:200:
> + if (err)
> [...]
>
> ERROR: braces {} are necessary for all arms of this statement
> #271: FILE: tools/ebpf/rss.bpf.c:217:
> + if (err)
> [...]
>
> WARNING: line over 80 characters
> #283: FILE: tools/ebpf/rss.bpf.c:229:
> + *l4_offset + opt_offset + offsetof(struct
> ipv6_destopt_hao, addr),
>
> ERROR: braces {} are necessary for all arms of this statement
> #286: FILE: tools/ebpf/rss.bpf.c:232:
> + if (err)
> [...]
>
> ERROR: braces {} are necessary for all arms of this statement
> #316: FILE: tools/ebpf/rss.bpf.c:262:
> + if (err)
> [...]
>
> ERROR: braces {} are necessary for all arms of this statement
> #330: FILE: tools/ebpf/rss.bpf.c:276:
> + if (err)
> [...]
>
> ERROR: braces {} are necessary for all arms of this statement
> #359: FILE: tools/ebpf/rss.bpf.c:305:
> + if (err)
> [...]
>
> ERROR: braces {} are necessary for all arms of this statement
> #373: FILE: tools/ebpf/rss.bpf.c:319:
> + if (err)
> [...]
>
> ERROR: braces {} are necessary for all arms of this statement
> #383: FILE: tools/ebpf/rss.bpf.c:329:
> + if (err)
> [...]
>
> ERROR: braces {} are necessary for all arms of this statement
> #394: FILE: tools/ebpf/rss.bpf.c:340:
> + if (err)
> [...]
>
> ERROR: braces {} are necessary for all arms of this statement
> #405: FILE: tools/ebpf/rss.bpf.c:351:
> + if (err)
> [...]
>
> ERROR: braces {} are necessary for all arms of this statement
> #429: FILE: tools/ebpf/rss.bpf.c:375:
> + if (err)
> [...]
>
> total: 13 errors, 4 warnings, 574 lines checked
>
> Patch 3/7 has style problems, please review. If any of these errors
> are false positives report them to the maintainer, see
> CHECKPATCH in MAINTAINERS.
>
> 4/7 Checking commit aa652c04e4a0 (ebpf: Added eBPF RSS loader.)
> Use of uninitialized value $acpi_testexpected in string eq at ./scripts/
> checkpatch.pl line 1529.
> WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
> #71:
> new file mode 100644
>
> WARNING: architecture specific defines should be avoided
> #353: FILE: ebpf/rss.bpf.skeleton.h:4:
> +#ifndef __RSS_BPF_SKEL_H__
>
> ERROR: code indent should never use tabs
> #360: FILE: ebpf/rss.bpf.skeleton.h:11:
> +^Istruct bpf_object_skeleton *skeleton;$
>
> ERROR: code indent should never use tabs
> #361: FILE: ebpf/rss.bpf.skeleton.h:12:
> +^Istruct bpf_object *obj;$
>
> ERROR: code indent should never use tabs
> #362: FILE: ebpf/rss.bpf.skeleton.h:13:
> +^Istruct {$
>
> ERROR: code indent should never use tabs
> #363: FILE: ebpf/rss.bpf.skeleton.h:14:
> +^I^Istruct bpf_map *tap_rss_map_configurations;$
>
> ERROR: code indent should never use tabs
> #364: FILE: ebpf/rss.bpf.skeleton.h:15:
> +^I^Istruct bpf_map *tap_rss_map_indirection_table;$
>
> ERROR: code indent should never use tabs
> #365: FILE: ebpf/rss.bpf.skeleton.h:16:
> +^I^Istruct bpf_map *tap_rss_map_toeplitz_key;$
>
> ERROR: code indent should never use tabs
> #366: FILE: ebpf/rss.bpf.skeleton.h:17:
> +^I} maps;$
>
> ERROR: code indent should never use tabs
> #367: FILE: ebpf/rss.bpf.skeleton.h:18:
> +^Istruct {$
>
> ERROR: code indent should never use tabs
> #368: FILE: ebpf/rss.bpf.skeleton.h:19:
> +^I^Istruct bpf_program *tun_rss_steering_prog;$
>
> ERROR: code indent should never use tabs
> #369: FILE: ebpf/rss.bpf.skeleton.h:20:
> +^I} progs;$
>
> ERROR: code indent should never use tabs
> #370: FILE: ebpf/rss.bpf.skeleton.h:21:
> +^Istruct {$
>
> ERROR: code indent should never use tabs
> #371: FILE: ebpf/rss.bpf.skeleton.h:22:
> +^I^Istruct bpf_link *tun_rss_steering_prog;$
>
> ERROR: code indent should never use tabs
> #372: FILE: ebpf/rss.bpf.skeleton.h:23:
> +^I} links;$
>
> ERROR: code indent should never use tabs
> #378: FILE: ebpf/rss.bpf.skeleton.h:29:
> +^Iif (!obj)$
>
> ERROR: braces {} are necessary for all arms of this statement
> #378: FILE: ebpf/rss.bpf.skeleton.h:29:
> + if (!obj)
> [...]
>
> ERROR: code indent should never use tabs
> #379: FILE: ebpf/rss.bpf.skeleton.h:30:
> +^I^Ireturn;$
>
> ERROR: code indent should never use tabs
> #380: FILE: ebpf/rss.bpf.skeleton.h:31:
> +^Iif (obj->skeleton)$
>
> ERROR: braces {} are necessary for all arms of this statement
> #380: FILE: ebpf/rss.bpf.skeleton.h:31:
> + if (obj->skeleton)
> [...]
>
> ERROR: code indent should never use tabs
> #381: FILE: ebpf/rss.bpf.skeleton.h:32:
> +^I^Ibpf_object__destroy_skeleton(obj->skeleton);$
>
> ERROR: code indent should never use tabs
> #382: FILE: ebpf/rss.bpf.skeleton.h:33:
> +^Ifree(obj);$
>
> ERROR: code indent should never use tabs
> #391: FILE: ebpf/rss.bpf.skeleton.h:42:
> +^Istruct rss_bpf *obj;$
>
> ERROR: code indent should never use tabs
> #393: FILE: ebpf/rss.bpf.skeleton.h:44:
> +^Iobj = (struct rss_bpf *)calloc(1, sizeof(*obj));$
>
> ERROR: code indent should never use tabs
> #394: FILE: ebpf/rss.bpf.skeleton.h:45:
> +^Iif (!obj)$
>
> ERROR: braces {} are necessary for all arms of this statement
> #394: FILE: ebpf/rss.bpf.skeleton.h:45:
> + if (!obj)
> [...]
>
> ERROR: code indent should never use tabs
> #395: FILE: ebpf/rss.bpf.skeleton.h:46:
> +^I^Ireturn NULL;$
>
> ERROR: code indent should never use tabs
> #396: FILE: ebpf/rss.bpf.skeleton.h:47:
> +^Iif (rss_bpf__create_skeleton(obj))$
>
> ERROR: braces {} are necessary for all arms of this statement
> #396: FILE: ebpf/rss.bpf.skeleton.h:47:
> + if (rss_bpf__create_skeleton(obj))
> [...]
>
> ERROR: code indent should never use tabs
> #397: FILE: ebpf/rss.bpf.skeleton.h:48:
> +^I^Igoto err;$
>
> ERROR: code indent should never use tabs
> #398: FILE: ebpf/rss.bpf.skeleton.h:49:
> +^Iif (bpf_object__open_skeleton(obj->skeleton, opts))$
>
> ERROR: braces {} are necessary for all arms of this statement
> #398: FILE: ebpf/rss.bpf.skeleton.h:49:
> + if (bpf_object__open_skeleton(obj->skeleton, opts))
> [...]
>
> ERROR: code indent should never use tabs
> #399: FILE: ebpf/rss.bpf.skeleton.h:50:
> +^I^Igoto err;$
>
> ERROR: code indent should never use tabs
> #401: FILE: ebpf/rss.bpf.skeleton.h:52:
> +^Ireturn obj;$
>
> ERROR: code indent should never use tabs
> #403: FILE: ebpf/rss.bpf.skeleton.h:54:
> +^Irss_bpf__destroy(obj);$
>
> ERROR: code indent should never use tabs
> #404: FILE: ebpf/rss.bpf.skeleton.h:55:
> +^Ireturn NULL;$
>
> ERROR: code indent should never use tabs
> #410: FILE: ebpf/rss.bpf.skeleton.h:61:
> +^Ireturn rss_bpf__open_opts(NULL);$
>
> ERROR: code indent should never use tabs
> #416: FILE: ebpf/rss.bpf.skeleton.h:67:
> +^Ireturn bpf_object__load_skeleton(obj->skeleton);$
>
> ERROR: code indent should never use tabs
> #422: FILE: ebpf/rss.bpf.skeleton.h:73:
> +^Istruct rss_bpf *obj;$
>
> ERROR: code indent should never use tabs
> #424: FILE: ebpf/rss.bpf.skeleton.h:75:
> +^Iobj = rss_bpf__open();$
>
> ERROR: code indent should never use tabs
> #425: FILE: ebpf/rss.bpf.skeleton.h:76:
> +^Iif (!obj)$
>
> ERROR: braces {} are necessary for all arms of this statement
> #425: FILE: ebpf/rss.bpf.skeleton.h:76:
> + if (!obj)
> [...]
>
> ERROR: code indent should never use tabs
> #426: FILE: ebpf/rss.bpf.skeleton.h:77:
> +^I^Ireturn NULL;$
>
> ERROR: code indent should never use tabs
> #427: FILE: ebpf/rss.bpf.skeleton.h:78:
> +^Iif (rss_bpf__load(obj)) {$
>
> ERROR: code indent should never use tabs
> #428: FILE: ebpf/rss.bpf.skeleton.h:79:
> +^I^Irss_bpf__destroy(obj);$
>
> ERROR: code indent should never use tabs
> #429: FILE: ebpf/rss.bpf.skeleton.h:80:
> +^I^Ireturn NULL;$
>
> ERROR: code indent should never use tabs
> #430: FILE: ebpf/rss.bpf.skeleton.h:81:
> +^I}$
>
> ERROR: code indent should never use tabs
> #431: FILE: ebpf/rss.bpf.skeleton.h:82:
> +^Ireturn obj;$
>
> ERROR: code indent should never use tabs
> #437: FILE: ebpf/rss.bpf.skeleton.h:88:
> +^Ireturn bpf_object__attach_skeleton(obj->skeleton);$
>
> ERROR: code indent should never use tabs
> #443: FILE: ebpf/rss.bpf.skeleton.h:94:
> +^Ireturn bpf_object__detach_skeleton(obj->skeleton);$
>
> ERROR: code indent should never use tabs
> #449: FILE: ebpf/rss.bpf.skeleton.h:100:
> +^Istruct bpf_object_skeleton *s;$
>
> ERROR: code indent should never use tabs
> #451: FILE: ebpf/rss.bpf.skeleton.h:102:
> +^Is = (struct bpf_object_skeleton *)calloc(1, sizeof(*s));$
>
> ERROR: code indent should never use tabs
> #452: FILE: ebpf/rss.bpf.skeleton.h:103:
> +^Iif (!s)$
>
> ERROR: braces {} are necessary for all arms of this statement
> #452: FILE: ebpf/rss.bpf.skeleton.h:103:
> + if (!s)
> [...]
>
> ERROR: code indent should never use tabs
> #453: FILE: ebpf/rss.bpf.skeleton.h:104:
> +^I^Ireturn -1;$
>
> ERROR: code indent should never use tabs
> #454: FILE: ebpf/rss.bpf.skeleton.h:105:
> +^Iobj->skeleton = s;$
>
> ERROR: code indent should never use tabs
> #456: FILE: ebpf/rss.bpf.skeleton.h:107:
> +^Is->sz = sizeof(*s);$
>
> ERROR: code indent should never use tabs
> #457: FILE: ebpf/rss.bpf.skeleton.h:108:
> +^Is->name = "rss_bpf";$
>
> ERROR: code indent should never use tabs
> #458: FILE: ebpf/rss.bpf.skeleton.h:109:
> +^Is->obj = &obj->obj;$
>
> ERROR: code indent should never use tabs
> #460: FILE: ebpf/rss.bpf.skeleton.h:111:
> +^I/* maps */$
>
> ERROR: code indent should never use tabs
> #461: FILE: ebpf/rss.bpf.skeleton.h:112:
> +^Is->map_cnt = 3;$
>
> ERROR: code indent should never use tabs
> #462: FILE: ebpf/rss.bpf.skeleton.h:113:
> +^Is->map_skel_sz = sizeof(*s->maps);$
>
> ERROR: code indent should never use tabs
> #463: FILE: ebpf/rss.bpf.skeleton.h:114:
> +^Is->maps = (struct bpf_map_skeleton *)calloc(s->map_cnt,
> s->map_skel_sz);$
>
> ERROR: code indent should never use tabs
> #464: FILE: ebpf/rss.bpf.skeleton.h:115:
> +^Iif (!s->maps)$
>
> ERROR: braces {} are necessary for all arms of this statement
> #464: FILE: ebpf/rss.bpf.skeleton.h:115:
> + if (!s->maps)
> [...]
>
> ERROR: code indent should never use tabs
> #465: FILE: ebpf/rss.bpf.skeleton.h:116:
> +^I^Igoto err;$
>
> ERROR: code indent should never use tabs
> #467: FILE: ebpf/rss.bpf.skeleton.h:118:
> +^Is->maps[0].name = "tap_rss_map_configurations";$
>
> ERROR: code indent should never use tabs
> #468: FILE: ebpf/rss.bpf.skeleton.h:119:
> +^Is->maps[0].map = &obj->maps.tap_rss_map_configurations;$
>
> ERROR: code indent should never use tabs
> #470: FILE: ebpf/rss.bpf.skeleton.h:121:
> +^Is->maps[1].name = "tap_rss_map_indirection_table";$
>
> ERROR: code indent should never use tabs
> #471: FILE: ebpf/rss.bpf.skeleton.h:122:
> +^Is->maps[1].map = &obj->maps.tap_rss_map_indirection_table;$
>
> ERROR: code indent should never use tabs
> #473: FILE: ebpf/rss.bpf.skeleton.h:124:
> +^Is->maps[2].name = "tap_rss_map_toeplitz_key";$
>
> ERROR: code indent should never use tabs
> #474: FILE: ebpf/rss.bpf.skeleton.h:125:
> +^Is->maps[2].map = &obj->maps.tap_rss_map_toeplitz_key;$
>
> ERROR: code indent should never use tabs
> #476: FILE: ebpf/rss.bpf.skeleton.h:127:
> +^I/* programs */$
>
> ERROR: code indent should never use tabs
> #477: FILE: ebpf/rss.bpf.skeleton.h:128:
> +^Is->prog_cnt = 1;$
>
> ERROR: code indent should never use tabs
> #478: FILE: ebpf/rss.bpf.skeleton.h:129:
> +^Is->prog_skel_sz = sizeof(*s->progs);$
>
> WARNING: line over 80 characters
> #479: FILE: ebpf/rss.bpf.skeleton.h:130:
> + s->progs = (struct bpf_prog_skeleton *)calloc(s->prog_cnt,
> s->prog_skel_sz);
>
> ERROR: code indent should never use tabs
> #479: FILE: ebpf/rss.bpf.skeleton.h:130:
> +^Is->progs = (struct bpf_prog_skeleton *)calloc(s->prog_cnt,
> s->prog_skel_sz);$
>
> ERROR: code indent should never use tabs
> #480: FILE: ebpf/rss.bpf.skeleton.h:131:
> +^Iif (!s->progs)$
>
> ERROR: braces {} are necessary for all arms of this statement
> #480: FILE: ebpf/rss.bpf.skeleton.h:131:
> + if (!s->progs)
> [...]
>
> ERROR: code indent should never use tabs
> #481: FILE: ebpf/rss.bpf.skeleton.h:132:
> +^I^Igoto err;$
>
> ERROR: code indent should never use tabs
> #483: FILE: ebpf/rss.bpf.skeleton.h:134:
> +^Is->progs[0].name = "tun_rss_steering_prog";$
>
> ERROR: code indent should never use tabs
> #484: FILE: ebpf/rss.bpf.skeleton.h:135:
> +^Is->progs[0].prog = &obj->progs.tun_rss_steering_prog;$
>
> ERROR: code indent should never use tabs
> #485: FILE: ebpf/rss.bpf.skeleton.h:136:
> +^Is->progs[0].link = &obj->links.tun_rss_steering_prog;$
>
> ERROR: code indent should never use tabs
> #487: FILE: ebpf/rss.bpf.skeleton.h:138:
> +^Is->data_sz = 7864;$
>
> ERROR: code indent should never use tabs
> #488: FILE: ebpf/rss.bpf.skeleton.h:139:
> +^Is->data = (void *)"\$
>
> ERROR: code indent should never use tabs
> #766: FILE: ebpf/rss.bpf.skeleton.h:417:
> +^Ireturn 0;$
>
> ERROR: code indent should never use tabs
> #768: FILE: ebpf/rss.bpf.skeleton.h:419:
> +^Ibpf_object__destroy_skeleton(s);$
>
> ERROR: code indent should never use tabs
> #769: FILE: ebpf/rss.bpf.skeleton.h:420:
> +^Ireturn -1;$
>
> total: 85 errors, 3 warnings, 758 lines checked
>
> Patch 4/7 has style problems, please review. If any of these errors
> are false positives report them to the maintainer, see
> CHECKPATCH in MAINTAINERS.
>
> 5/7 Checking commit 043dbde56379 (virtio-net: Added eBPF RSS to
> virtio-net.)
> WARNING: line over 80 characters
> #185: FILE: hw/net/virtio-net.c:2868:
> + warn_report("Can't post-load eBPF RSS - fallback to
> software RSS");
>
> total: 0 errors, 1 warnings, 214 lines checked
>
> Patch 5/7 has style problems, please review. If any of these errors
> are false positives report them to the maintainer, see
> CHECKPATCH in MAINTAINERS.
> 6/7 Checking commit 57b0f9a94036 (docs: Added eBPF documentation.)
> Use of uninitialized value $acpi_testexpected in string eq at ./scripts/
> checkpatch.pl line 1529.
> WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
> #16:
> new file mode 100644
>
> total: 0 errors, 1 warnings, 129 lines checked
>
> Patch 6/7 has style problems, please review. If any of these errors
> are false positives report them to the maintainer, see
> CHECKPATCH in MAINTAINERS.
> 7/7 Checking commit ad293ca1c684 (MAINTAINERS: Added eBPF maintainers
> information.)
> === OUTPUT END ===
>
> Test command exited with code: 1
>
>
> The full log is available at
>
> http://patchew.org/logs/20210325153529.75831-1-andrew@daynix.com/testing.checkpatch/?type=message
> .
> ---
> Email generated automatically by Patchew [https://patchew.org/].
> Please send your feedback to patchew-devel@redhat.com
[-- Attachment #2: Type: text/html, Size: 20016 bytes --]
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH v5 0/7] eBPF RSS support for virtio-net
2021-03-25 15:35 [PATCH v5 0/7] eBPF RSS support for virtio-net Andrew Melnychenko
` (7 preceding siblings ...)
2021-03-25 15:58 ` [PATCH v5 0/7] eBPF RSS support for virtio-net no-reply
@ 2021-04-02 2:56 ` Jason Wang
2021-04-02 5:21 ` Yuri Benditovich
2021-05-14 13:43 ` Michael S. Tsirkin
9 siblings, 1 reply; 15+ messages in thread
From: Jason Wang @ 2021-04-02 2:56 UTC (permalink / raw)
To: Andrew Melnychenko, mst; +Cc: yan, yuri.benditovich, berrange, qemu-devel
在 2021/3/25 下午11:35, Andrew Melnychenko 写道:
> This set of patches introduces the usage of eBPF for packet steering
> and RSS hash calculation:
> * RSS(Receive Side Scaling) is used to distribute network packets to
> guest virtqueues by calculating packet hash
> * Additionally adding support for the usage of RSS with vhost
>
> The eBPF works on kernels 5.8+
> On earlier kerneld it fails to load and the RSS feature is reported
> only without vhost and implemented in 'in-qemu' software.
>
> Implementation notes:
> Linux TAP TUNSETSTEERINGEBPF ioctl was used to set the eBPF program.
> Added libbpf dependency and eBPF support.
> The eBPF program is part of the qemu and presented as an array
> of BPF ELF file data. The eBPF array file initially generated by bpftool.
> The compilation of eBPF is not part of QEMU build and can be done
> using provided Makefile.ebpf.
> Added changes to virtio-net and vhost, primary eBPF RSS is used.
> 'in-qemu' RSS used in the case of hash population and as a fallback option.
> For vhost, the hash population feature is not reported to the guest.
>
> Please also see the documentation in PATCH 6/7.
>
> Known issues:
> * hash population not supported by eBPF RSS: 'in-qemu' RSS used
> as a fallback, also, hash population feature is not reported to guests
> with vhost.
> * IPv6 extensions still in progress.
Hi Andrew:
The patch looks good at a glance. I tend to queue it for 6.1.
One issue is that, there's no easy way for testing it without a windows
guest.
Do you have plan to extend Linux driver to support RSS (e.g via ethtool?).
Thanks
>
> Changes since v1:
> * using libbpf instead of direct 'bpf' system call.
> * added libbpf dependency to the configure/meson scripts.
> * changed python script for eBPF .h file generation.
> * changed eBPF program - reading L3 proto from ethernet frame.
> * added TUNSETSTEERINGEBPF define for TUN.
> * changed the maintainer's info.
> * added license headers.
> * refactored code.
>
> Changes since v2:
> * using bpftool for eBPF skeleton generation.
> * ebpf_rss is refactored to use skeleton generated by bpftool.
> * added/adjasted license in comment sections and in eBPF file.
> * rss.bpf.c and Makefile.ebpf moved to the tool/ebpf folder.
> * virtio-net eBPF rss refactored. Now eBPF initialized during realize().
>
> Changes since v3:
> * rebased to last master.
> * fixed issue with failed build without libbpf.
> * fixed ebpf loading without rss option.
> * refactored labels in ebpf_rss.c
>
> Changes since v4:
> * refactored configure/meson script.
> * added checks for load_bytes in ebpf.
> * documentation added to the index.
> * refactored Makefile and rss.bpf.c.
> * rebased to last master.
>
> Andrew (7):
> net/tap: Added TUNSETSTEERINGEBPF code.
> net: Added SetSteeringEBPF method for NetClientState.
> ebpf: Added eBPF RSS program.
> ebpf: Added eBPF RSS loader.
> virtio-net: Added eBPF RSS to virtio-net.
> docs: Added eBPF documentation.
> MAINTAINERS: Added eBPF maintainers information.
>
> MAINTAINERS | 8 +
> configure | 8 +-
> docs/devel/ebpf_rss.rst | 125 ++++++++
> docs/devel/index.rst | 1 +
> ebpf/ebpf_rss-stub.c | 40 +++
> ebpf/ebpf_rss.c | 165 ++++++++++
> ebpf/ebpf_rss.h | 44 +++
> ebpf/meson.build | 1 +
> ebpf/rss.bpf.skeleton.h | 423 +++++++++++++++++++++++++
> ebpf/trace-events | 4 +
> ebpf/trace.h | 2 +
> hw/net/vhost_net.c | 3 +
> hw/net/virtio-net.c | 115 ++++++-
> include/hw/virtio/virtio-net.h | 4 +
> include/net/net.h | 2 +
> meson.build | 9 +
> meson_options.txt | 2 +
> net/tap-bsd.c | 5 +
> net/tap-linux.c | 13 +
> net/tap-linux.h | 1 +
> net/tap-solaris.c | 5 +
> net/tap-stub.c | 5 +
> net/tap.c | 9 +
> net/tap_int.h | 1 +
> net/vhost-vdpa.c | 2 +
> tools/ebpf/Makefile.ebpf | 22 ++
> tools/ebpf/rss.bpf.c | 552 +++++++++++++++++++++++++++++++++
> 27 files changed, 1567 insertions(+), 4 deletions(-)
> create mode 100644 docs/devel/ebpf_rss.rst
> create mode 100644 ebpf/ebpf_rss-stub.c
> create mode 100644 ebpf/ebpf_rss.c
> create mode 100644 ebpf/ebpf_rss.h
> create mode 100644 ebpf/meson.build
> create mode 100644 ebpf/rss.bpf.skeleton.h
> create mode 100644 ebpf/trace-events
> create mode 100644 ebpf/trace.h
> create mode 100755 tools/ebpf/Makefile.ebpf
> create mode 100644 tools/ebpf/rss.bpf.c
>
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH v5 0/7] eBPF RSS support for virtio-net
2021-04-02 2:56 ` Jason Wang
@ 2021-04-02 5:21 ` Yuri Benditovich
2021-04-02 5:25 ` Yuri Benditovich
0 siblings, 1 reply; 15+ messages in thread
From: Yuri Benditovich @ 2021-04-02 5:21 UTC (permalink / raw)
To: Jason Wang
Cc: Yan Vugenfirer, Andrew Melnychenko, Daniel P. Berrangé,
qemu-devel, Michael S . Tsirkin
Hi Jason,
Yes, the work to support RSS in the Linux virtio-net driver is in progress.
https://bugzilla.redhat.com/show_bug.cgi?id=1912082
On Fri, Apr 2, 2021 at 5:57 AM Jason Wang <jasowang@redhat.com> wrote:
>
>
> 在 2021/3/25 下午11:35, Andrew Melnychenko 写道:
> > This set of patches introduces the usage of eBPF for packet steering
> > and RSS hash calculation:
> > * RSS(Receive Side Scaling) is used to distribute network packets to
> > guest virtqueues by calculating packet hash
> > * Additionally adding support for the usage of RSS with vhost
> >
> > The eBPF works on kernels 5.8+
> > On earlier kerneld it fails to load and the RSS feature is reported
> > only without vhost and implemented in 'in-qemu' software.
> >
> > Implementation notes:
> > Linux TAP TUNSETSTEERINGEBPF ioctl was used to set the eBPF program.
> > Added libbpf dependency and eBPF support.
> > The eBPF program is part of the qemu and presented as an array
> > of BPF ELF file data. The eBPF array file initially generated by bpftool.
> > The compilation of eBPF is not part of QEMU build and can be done
> > using provided Makefile.ebpf.
> > Added changes to virtio-net and vhost, primary eBPF RSS is used.
> > 'in-qemu' RSS used in the case of hash population and as a fallback option.
> > For vhost, the hash population feature is not reported to the guest.
> >
> > Please also see the documentation in PATCH 6/7.
> >
> > Known issues:
> > * hash population not supported by eBPF RSS: 'in-qemu' RSS used
> > as a fallback, also, hash population feature is not reported to guests
> > with vhost.
> > * IPv6 extensions still in progress.
>
>
> Hi Andrew:
>
> The patch looks good at a glance. I tend to queue it for 6.1.
>
> One issue is that, there's no easy way for testing it without a windows
> guest.
>
> Do you have plan to extend Linux driver to support RSS (e.g via ethtool?).
>
> Thanks
>
>
> >
> > Changes since v1:
> > * using libbpf instead of direct 'bpf' system call.
> > * added libbpf dependency to the configure/meson scripts.
> > * changed python script for eBPF .h file generation.
> > * changed eBPF program - reading L3 proto from ethernet frame.
> > * added TUNSETSTEERINGEBPF define for TUN.
> > * changed the maintainer's info.
> > * added license headers.
> > * refactored code.
> >
> > Changes since v2:
> > * using bpftool for eBPF skeleton generation.
> > * ebpf_rss is refactored to use skeleton generated by bpftool.
> > * added/adjasted license in comment sections and in eBPF file.
> > * rss.bpf.c and Makefile.ebpf moved to the tool/ebpf folder.
> > * virtio-net eBPF rss refactored. Now eBPF initialized during realize().
> >
> > Changes since v3:
> > * rebased to last master.
> > * fixed issue with failed build without libbpf.
> > * fixed ebpf loading without rss option.
> > * refactored labels in ebpf_rss.c
> >
> > Changes since v4:
> > * refactored configure/meson script.
> > * added checks for load_bytes in ebpf.
> > * documentation added to the index.
> > * refactored Makefile and rss.bpf.c.
> > * rebased to last master.
> >
> > Andrew (7):
> > net/tap: Added TUNSETSTEERINGEBPF code.
> > net: Added SetSteeringEBPF method for NetClientState.
> > ebpf: Added eBPF RSS program.
> > ebpf: Added eBPF RSS loader.
> > virtio-net: Added eBPF RSS to virtio-net.
> > docs: Added eBPF documentation.
> > MAINTAINERS: Added eBPF maintainers information.
> >
> > MAINTAINERS | 8 +
> > configure | 8 +-
> > docs/devel/ebpf_rss.rst | 125 ++++++++
> > docs/devel/index.rst | 1 +
> > ebpf/ebpf_rss-stub.c | 40 +++
> > ebpf/ebpf_rss.c | 165 ++++++++++
> > ebpf/ebpf_rss.h | 44 +++
> > ebpf/meson.build | 1 +
> > ebpf/rss.bpf.skeleton.h | 423 +++++++++++++++++++++++++
> > ebpf/trace-events | 4 +
> > ebpf/trace.h | 2 +
> > hw/net/vhost_net.c | 3 +
> > hw/net/virtio-net.c | 115 ++++++-
> > include/hw/virtio/virtio-net.h | 4 +
> > include/net/net.h | 2 +
> > meson.build | 9 +
> > meson_options.txt | 2 +
> > net/tap-bsd.c | 5 +
> > net/tap-linux.c | 13 +
> > net/tap-linux.h | 1 +
> > net/tap-solaris.c | 5 +
> > net/tap-stub.c | 5 +
> > net/tap.c | 9 +
> > net/tap_int.h | 1 +
> > net/vhost-vdpa.c | 2 +
> > tools/ebpf/Makefile.ebpf | 22 ++
> > tools/ebpf/rss.bpf.c | 552 +++++++++++++++++++++++++++++++++
> > 27 files changed, 1567 insertions(+), 4 deletions(-)
> > create mode 100644 docs/devel/ebpf_rss.rst
> > create mode 100644 ebpf/ebpf_rss-stub.c
> > create mode 100644 ebpf/ebpf_rss.c
> > create mode 100644 ebpf/ebpf_rss.h
> > create mode 100644 ebpf/meson.build
> > create mode 100644 ebpf/rss.bpf.skeleton.h
> > create mode 100644 ebpf/trace-events
> > create mode 100644 ebpf/trace.h
> > create mode 100755 tools/ebpf/Makefile.ebpf
> > create mode 100644 tools/ebpf/rss.bpf.c
> >
>
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH v5 0/7] eBPF RSS support for virtio-net
2021-04-02 5:21 ` Yuri Benditovich
@ 2021-04-02 5:25 ` Yuri Benditovich
0 siblings, 0 replies; 15+ messages in thread
From: Yuri Benditovich @ 2021-04-02 5:25 UTC (permalink / raw)
To: Jason Wang
Cc: Yan Vugenfirer, Andrew Melnychenko, Daniel P. Berrangé,
qemu-devel, Michael S . Tsirkin
More correctly, https://bugzilla.redhat.com/show_bug.cgi?id=1865786
On Fri, Apr 2, 2021 at 8:21 AM Yuri Benditovich
<yuri.benditovich@daynix.com> wrote:
>
> Hi Jason,
>
> Yes, the work to support RSS in the Linux virtio-net driver is in progress.
> https://bugzilla.redhat.com/show_bug.cgi?id=1912082
>
> On Fri, Apr 2, 2021 at 5:57 AM Jason Wang <jasowang@redhat.com> wrote:
> >
> >
> > 在 2021/3/25 下午11:35, Andrew Melnychenko 写道:
> > > This set of patches introduces the usage of eBPF for packet steering
> > > and RSS hash calculation:
> > > * RSS(Receive Side Scaling) is used to distribute network packets to
> > > guest virtqueues by calculating packet hash
> > > * Additionally adding support for the usage of RSS with vhost
> > >
> > > The eBPF works on kernels 5.8+
> > > On earlier kerneld it fails to load and the RSS feature is reported
> > > only without vhost and implemented in 'in-qemu' software.
> > >
> > > Implementation notes:
> > > Linux TAP TUNSETSTEERINGEBPF ioctl was used to set the eBPF program.
> > > Added libbpf dependency and eBPF support.
> > > The eBPF program is part of the qemu and presented as an array
> > > of BPF ELF file data. The eBPF array file initially generated by bpftool.
> > > The compilation of eBPF is not part of QEMU build and can be done
> > > using provided Makefile.ebpf.
> > > Added changes to virtio-net and vhost, primary eBPF RSS is used.
> > > 'in-qemu' RSS used in the case of hash population and as a fallback option.
> > > For vhost, the hash population feature is not reported to the guest.
> > >
> > > Please also see the documentation in PATCH 6/7.
> > >
> > > Known issues:
> > > * hash population not supported by eBPF RSS: 'in-qemu' RSS used
> > > as a fallback, also, hash population feature is not reported to guests
> > > with vhost.
> > > * IPv6 extensions still in progress.
> >
> >
> > Hi Andrew:
> >
> > The patch looks good at a glance. I tend to queue it for 6.1.
> >
> > One issue is that, there's no easy way for testing it without a windows
> > guest.
> >
> > Do you have plan to extend Linux driver to support RSS (e.g via ethtool?).
> >
> > Thanks
> >
> >
> > >
> > > Changes since v1:
> > > * using libbpf instead of direct 'bpf' system call.
> > > * added libbpf dependency to the configure/meson scripts.
> > > * changed python script for eBPF .h file generation.
> > > * changed eBPF program - reading L3 proto from ethernet frame.
> > > * added TUNSETSTEERINGEBPF define for TUN.
> > > * changed the maintainer's info.
> > > * added license headers.
> > > * refactored code.
> > >
> > > Changes since v2:
> > > * using bpftool for eBPF skeleton generation.
> > > * ebpf_rss is refactored to use skeleton generated by bpftool.
> > > * added/adjasted license in comment sections and in eBPF file.
> > > * rss.bpf.c and Makefile.ebpf moved to the tool/ebpf folder.
> > > * virtio-net eBPF rss refactored. Now eBPF initialized during realize().
> > >
> > > Changes since v3:
> > > * rebased to last master.
> > > * fixed issue with failed build without libbpf.
> > > * fixed ebpf loading without rss option.
> > > * refactored labels in ebpf_rss.c
> > >
> > > Changes since v4:
> > > * refactored configure/meson script.
> > > * added checks for load_bytes in ebpf.
> > > * documentation added to the index.
> > > * refactored Makefile and rss.bpf.c.
> > > * rebased to last master.
> > >
> > > Andrew (7):
> > > net/tap: Added TUNSETSTEERINGEBPF code.
> > > net: Added SetSteeringEBPF method for NetClientState.
> > > ebpf: Added eBPF RSS program.
> > > ebpf: Added eBPF RSS loader.
> > > virtio-net: Added eBPF RSS to virtio-net.
> > > docs: Added eBPF documentation.
> > > MAINTAINERS: Added eBPF maintainers information.
> > >
> > > MAINTAINERS | 8 +
> > > configure | 8 +-
> > > docs/devel/ebpf_rss.rst | 125 ++++++++
> > > docs/devel/index.rst | 1 +
> > > ebpf/ebpf_rss-stub.c | 40 +++
> > > ebpf/ebpf_rss.c | 165 ++++++++++
> > > ebpf/ebpf_rss.h | 44 +++
> > > ebpf/meson.build | 1 +
> > > ebpf/rss.bpf.skeleton.h | 423 +++++++++++++++++++++++++
> > > ebpf/trace-events | 4 +
> > > ebpf/trace.h | 2 +
> > > hw/net/vhost_net.c | 3 +
> > > hw/net/virtio-net.c | 115 ++++++-
> > > include/hw/virtio/virtio-net.h | 4 +
> > > include/net/net.h | 2 +
> > > meson.build | 9 +
> > > meson_options.txt | 2 +
> > > net/tap-bsd.c | 5 +
> > > net/tap-linux.c | 13 +
> > > net/tap-linux.h | 1 +
> > > net/tap-solaris.c | 5 +
> > > net/tap-stub.c | 5 +
> > > net/tap.c | 9 +
> > > net/tap_int.h | 1 +
> > > net/vhost-vdpa.c | 2 +
> > > tools/ebpf/Makefile.ebpf | 22 ++
> > > tools/ebpf/rss.bpf.c | 552 +++++++++++++++++++++++++++++++++
> > > 27 files changed, 1567 insertions(+), 4 deletions(-)
> > > create mode 100644 docs/devel/ebpf_rss.rst
> > > create mode 100644 ebpf/ebpf_rss-stub.c
> > > create mode 100644 ebpf/ebpf_rss.c
> > > create mode 100644 ebpf/ebpf_rss.h
> > > create mode 100644 ebpf/meson.build
> > > create mode 100644 ebpf/rss.bpf.skeleton.h
> > > create mode 100644 ebpf/trace-events
> > > create mode 100644 ebpf/trace.h
> > > create mode 100755 tools/ebpf/Makefile.ebpf
> > > create mode 100644 tools/ebpf/rss.bpf.c
> > >
> >
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH v5 0/7] eBPF RSS support for virtio-net
2021-03-25 15:35 [PATCH v5 0/7] eBPF RSS support for virtio-net Andrew Melnychenko
` (8 preceding siblings ...)
2021-04-02 2:56 ` Jason Wang
@ 2021-05-14 13:43 ` Michael S. Tsirkin
2021-05-17 15:30 ` Yuri Benditovich
9 siblings, 1 reply; 15+ messages in thread
From: Michael S. Tsirkin @ 2021-05-14 13:43 UTC (permalink / raw)
To: Andrew Melnychenko; +Cc: yan, yuri.benditovich, jasowang, berrange, qemu-devel
On Thu, Mar 25, 2021 at 05:35:22PM +0200, Andrew Melnychenko wrote:
> This set of patches introduces the usage of eBPF for packet steering
> and RSS hash calculation:
> * RSS(Receive Side Scaling) is used to distribute network packets to
> guest virtqueues by calculating packet hash
> * Additionally adding support for the usage of RSS with vhost
>
> The eBPF works on kernels 5.8+
> On earlier kerneld it fails to load and the RSS feature is reported
> only without vhost and implemented in 'in-qemu' software.
>
> Implementation notes:
> Linux TAP TUNSETSTEERINGEBPF ioctl was used to set the eBPF program.
> Added libbpf dependency and eBPF support.
> The eBPF program is part of the qemu and presented as an array
> of BPF ELF file data. The eBPF array file initially generated by bpftool.
> The compilation of eBPF is not part of QEMU build and can be done
> using provided Makefile.ebpf.
> Added changes to virtio-net and vhost, primary eBPF RSS is used.
> 'in-qemu' RSS used in the case of hash population and as a fallback option.
> For vhost, the hash population feature is not reported to the guest.
>
> Please also see the documentation in PATCH 6/7.
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
> Known issues:
> * hash population not supported by eBPF RSS: 'in-qemu' RSS used
> as a fallback, also, hash population feature is not reported to guests
> with vhost.
Could we instead fail init when RSS is requested and vhost is
enabled? we can't do it for on by default features but we can
for off by default ones ...
> * IPv6 extensions still in progress.
>
> Changes since v1:
> * using libbpf instead of direct 'bpf' system call.
> * added libbpf dependency to the configure/meson scripts.
> * changed python script for eBPF .h file generation.
> * changed eBPF program - reading L3 proto from ethernet frame.
> * added TUNSETSTEERINGEBPF define for TUN.
> * changed the maintainer's info.
> * added license headers.
> * refactored code.
>
> Changes since v2:
> * using bpftool for eBPF skeleton generation.
> * ebpf_rss is refactored to use skeleton generated by bpftool.
> * added/adjasted license in comment sections and in eBPF file.
> * rss.bpf.c and Makefile.ebpf moved to the tool/ebpf folder.
> * virtio-net eBPF rss refactored. Now eBPF initialized during realize().
>
> Changes since v3:
> * rebased to last master.
> * fixed issue with failed build without libbpf.
> * fixed ebpf loading without rss option.
> * refactored labels in ebpf_rss.c
>
> Changes since v4:
> * refactored configure/meson script.
> * added checks for load_bytes in ebpf.
> * documentation added to the index.
> * refactored Makefile and rss.bpf.c.
> * rebased to last master.
>
> Andrew (7):
> net/tap: Added TUNSETSTEERINGEBPF code.
> net: Added SetSteeringEBPF method for NetClientState.
> ebpf: Added eBPF RSS program.
> ebpf: Added eBPF RSS loader.
> virtio-net: Added eBPF RSS to virtio-net.
> docs: Added eBPF documentation.
> MAINTAINERS: Added eBPF maintainers information.
>
> MAINTAINERS | 8 +
> configure | 8 +-
> docs/devel/ebpf_rss.rst | 125 ++++++++
> docs/devel/index.rst | 1 +
> ebpf/ebpf_rss-stub.c | 40 +++
> ebpf/ebpf_rss.c | 165 ++++++++++
> ebpf/ebpf_rss.h | 44 +++
> ebpf/meson.build | 1 +
> ebpf/rss.bpf.skeleton.h | 423 +++++++++++++++++++++++++
> ebpf/trace-events | 4 +
> ebpf/trace.h | 2 +
> hw/net/vhost_net.c | 3 +
> hw/net/virtio-net.c | 115 ++++++-
> include/hw/virtio/virtio-net.h | 4 +
> include/net/net.h | 2 +
> meson.build | 9 +
> meson_options.txt | 2 +
> net/tap-bsd.c | 5 +
> net/tap-linux.c | 13 +
> net/tap-linux.h | 1 +
> net/tap-solaris.c | 5 +
> net/tap-stub.c | 5 +
> net/tap.c | 9 +
> net/tap_int.h | 1 +
> net/vhost-vdpa.c | 2 +
> tools/ebpf/Makefile.ebpf | 22 ++
> tools/ebpf/rss.bpf.c | 552 +++++++++++++++++++++++++++++++++
> 27 files changed, 1567 insertions(+), 4 deletions(-)
> create mode 100644 docs/devel/ebpf_rss.rst
> create mode 100644 ebpf/ebpf_rss-stub.c
> create mode 100644 ebpf/ebpf_rss.c
> create mode 100644 ebpf/ebpf_rss.h
> create mode 100644 ebpf/meson.build
> create mode 100644 ebpf/rss.bpf.skeleton.h
> create mode 100644 ebpf/trace-events
> create mode 100644 ebpf/trace.h
> create mode 100755 tools/ebpf/Makefile.ebpf
> create mode 100644 tools/ebpf/rss.bpf.c
>
> --
> 2.31.0
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH v5 0/7] eBPF RSS support for virtio-net
2021-05-14 13:43 ` Michael S. Tsirkin
@ 2021-05-17 15:30 ` Yuri Benditovich
0 siblings, 0 replies; 15+ messages in thread
From: Yuri Benditovich @ 2021-05-17 15:30 UTC (permalink / raw)
To: Michael S. Tsirkin
Cc: Yan Vugenfirer, Andrew Melnychenko, Daniel P. Berrangé,
Jason Wang, qemu-devel
On Fri, May 14, 2021 at 4:43 PM Michael S. Tsirkin <mst@redhat.com> wrote:
>
> On Thu, Mar 25, 2021 at 05:35:22PM +0200, Andrew Melnychenko wrote:
> > This set of patches introduces the usage of eBPF for packet steering
> > and RSS hash calculation:
> > * RSS(Receive Side Scaling) is used to distribute network packets to
> > guest virtqueues by calculating packet hash
> > * Additionally adding support for the usage of RSS with vhost
> >
> > The eBPF works on kernels 5.8+
> > On earlier kerneld it fails to load and the RSS feature is reported
> > only without vhost and implemented in 'in-qemu' software.
> >
> > Implementation notes:
> > Linux TAP TUNSETSTEERINGEBPF ioctl was used to set the eBPF program.
> > Added libbpf dependency and eBPF support.
> > The eBPF program is part of the qemu and presented as an array
> > of BPF ELF file data. The eBPF array file initially generated by bpftool.
> > The compilation of eBPF is not part of QEMU build and can be done
> > using provided Makefile.ebpf.
> > Added changes to virtio-net and vhost, primary eBPF RSS is used.
> > 'in-qemu' RSS used in the case of hash population and as a fallback option.
> > For vhost, the hash population feature is not reported to the guest.
> >
> > Please also see the documentation in PATCH 6/7.
>
> Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
>
> > Known issues:
> > * hash population not supported by eBPF RSS: 'in-qemu' RSS used
> > as a fallback, also, hash population feature is not reported to guests
> > with vhost.
>
> Could we instead fail init when RSS is requested and vhost is
> enabled? we can't do it for on by default features but we can
> for off by default ones ...
>
Of course this is possible.
I hope we do not need to stop the merge (it is in progress) and this
can be done in a separate patch and after some discussion.
Notes for the discussion:
1. We are not talking about RSS (it does not contradict with vhost
anymore), this is about "hash report".
2. Linux guest does not acknowledge this feature and for Linux VM
there is no motivation to enable it at all. So it looks like the issue
is minor, if any.
3. Currently we clear this feature with vhost but there is nothing
specific to the "hash report" feature; we clear it during a check of
vhost features (as well as other features dependent on vhost). If/when
this feature will be supported by the kernel - we'll not disable it
automatically. You suggest to fail the init for "hash + vhost"
explicitly without any special reason.
4. In general I think failing init is not the best behavior of qemu,
it is typically used in case of a really significant problem. Absence
of this feature is not something that leads to unexpected behavior or
significant performance loss. Maybe a warning is enough?
> > * IPv6 extensions still in progress.
> >
> > Changes since v1:
> > * using libbpf instead of direct 'bpf' system call.
> > * added libbpf dependency to the configure/meson scripts.
> > * changed python script for eBPF .h file generation.
> > * changed eBPF program - reading L3 proto from ethernet frame.
> > * added TUNSETSTEERINGEBPF define for TUN.
> > * changed the maintainer's info.
> > * added license headers.
> > * refactored code.
> >
> > Changes since v2:
> > * using bpftool for eBPF skeleton generation.
> > * ebpf_rss is refactored to use skeleton generated by bpftool.
> > * added/adjasted license in comment sections and in eBPF file.
> > * rss.bpf.c and Makefile.ebpf moved to the tool/ebpf folder.
> > * virtio-net eBPF rss refactored. Now eBPF initialized during realize().
> >
> > Changes since v3:
> > * rebased to last master.
> > * fixed issue with failed build without libbpf.
> > * fixed ebpf loading without rss option.
> > * refactored labels in ebpf_rss.c
> >
> > Changes since v4:
> > * refactored configure/meson script.
> > * added checks for load_bytes in ebpf.
> > * documentation added to the index.
> > * refactored Makefile and rss.bpf.c.
> > * rebased to last master.
> >
> > Andrew (7):
> > net/tap: Added TUNSETSTEERINGEBPF code.
> > net: Added SetSteeringEBPF method for NetClientState.
> > ebpf: Added eBPF RSS program.
> > ebpf: Added eBPF RSS loader.
> > virtio-net: Added eBPF RSS to virtio-net.
> > docs: Added eBPF documentation.
> > MAINTAINERS: Added eBPF maintainers information.
> >
> > MAINTAINERS | 8 +
> > configure | 8 +-
> > docs/devel/ebpf_rss.rst | 125 ++++++++
> > docs/devel/index.rst | 1 +
> > ebpf/ebpf_rss-stub.c | 40 +++
> > ebpf/ebpf_rss.c | 165 ++++++++++
> > ebpf/ebpf_rss.h | 44 +++
> > ebpf/meson.build | 1 +
> > ebpf/rss.bpf.skeleton.h | 423 +++++++++++++++++++++++++
> > ebpf/trace-events | 4 +
> > ebpf/trace.h | 2 +
> > hw/net/vhost_net.c | 3 +
> > hw/net/virtio-net.c | 115 ++++++-
> > include/hw/virtio/virtio-net.h | 4 +
> > include/net/net.h | 2 +
> > meson.build | 9 +
> > meson_options.txt | 2 +
> > net/tap-bsd.c | 5 +
> > net/tap-linux.c | 13 +
> > net/tap-linux.h | 1 +
> > net/tap-solaris.c | 5 +
> > net/tap-stub.c | 5 +
> > net/tap.c | 9 +
> > net/tap_int.h | 1 +
> > net/vhost-vdpa.c | 2 +
> > tools/ebpf/Makefile.ebpf | 22 ++
> > tools/ebpf/rss.bpf.c | 552 +++++++++++++++++++++++++++++++++
> > 27 files changed, 1567 insertions(+), 4 deletions(-)
> > create mode 100644 docs/devel/ebpf_rss.rst
> > create mode 100644 ebpf/ebpf_rss-stub.c
> > create mode 100644 ebpf/ebpf_rss.c
> > create mode 100644 ebpf/ebpf_rss.h
> > create mode 100644 ebpf/meson.build
> > create mode 100644 ebpf/rss.bpf.skeleton.h
> > create mode 100644 ebpf/trace-events
> > create mode 100644 ebpf/trace.h
> > create mode 100755 tools/ebpf/Makefile.ebpf
> > create mode 100644 tools/ebpf/rss.bpf.c
> >
> > --
> > 2.31.0
>
^ permalink raw reply [flat|nested] 15+ messages in thread
end of thread, other threads:[~2021-05-17 15:32 UTC | newest]
Thread overview: 15+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-03-25 15:35 [PATCH v5 0/7] eBPF RSS support for virtio-net Andrew Melnychenko
2021-03-25 15:35 ` [PATCH v5 1/7] net/tap: Added TUNSETSTEERINGEBPF code Andrew Melnychenko
2021-03-25 15:35 ` [PATCH v5 2/7] net: Added SetSteeringEBPF method for NetClientState Andrew Melnychenko
2021-03-25 15:35 ` [PATCH v5 3/7] ebpf: Added eBPF RSS program Andrew Melnychenko
2021-03-25 15:35 ` [PATCH v5 4/7] ebpf: Added eBPF RSS loader Andrew Melnychenko
2021-03-25 15:35 ` [PATCH v5 5/7] virtio-net: Added eBPF RSS to virtio-net Andrew Melnychenko
2021-03-25 15:35 ` [PATCH v5 6/7] docs: Added eBPF documentation Andrew Melnychenko
2021-03-25 15:35 ` [PATCH v5 7/7] MAINTAINERS: Added eBPF maintainers information Andrew Melnychenko
2021-03-25 15:58 ` [PATCH v5 0/7] eBPF RSS support for virtio-net no-reply
2021-04-01 7:22 ` Andrew Melnichenko
2021-04-02 2:56 ` Jason Wang
2021-04-02 5:21 ` Yuri Benditovich
2021-04-02 5:25 ` Yuri Benditovich
2021-05-14 13:43 ` Michael S. Tsirkin
2021-05-17 15:30 ` Yuri Benditovich
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).