qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Shashi Mallela <shashi.mallela@linaro.org>
To: peter.maydell@linaro.org, leif@nuviainc.com, rad@semihalf.com
Cc: qemu-arm@nongnu.org, qemu-devel@nongnu.org
Subject: [PATCH v3 6/8] hw/intc: GICv3 redistributor ITS processing
Date: Thu, 29 Apr 2021 19:41:59 -0400	[thread overview]
Message-ID: <20210429234201.125565-7-shashi.mallela@linaro.org> (raw)
In-Reply-To: <20210429234201.125565-1-shashi.mallela@linaro.org>

Implemented lpi processing at redistributor to get lpi config info
from lpi configuration table,determine priority,set pending state in
lpi pending table and forward the lpi to cpuif.Added logic to invoke
redistributor lpi processing with translated LPI which set/clear LPI
from ITS device as part of ITS INT,CLEAR,DISCARD command and
GITS_TRANSLATER processing.

Signed-off-by: Shashi Mallela <shashi.mallela@linaro.org>
---
 hw/intc/arm_gicv3.c        |   6 ++
 hw/intc/arm_gicv3_cpuif.c  |  20 ++++--
 hw/intc/arm_gicv3_its.c    |  12 ++--
 hw/intc/arm_gicv3_redist.c | 133 +++++++++++++++++++++++++++++++++++++
 hw/intc/gicv3_internal.h   |   9 +++
 5 files changed, 171 insertions(+), 9 deletions(-)

diff --git a/hw/intc/arm_gicv3.c b/hw/intc/arm_gicv3.c
index 66eaa97198..618fa1af95 100644
--- a/hw/intc/arm_gicv3.c
+++ b/hw/intc/arm_gicv3.c
@@ -166,6 +166,12 @@ static void gicv3_redist_update_noirqset(GICv3CPUState *cs)
         cs->hppi.grp = gicv3_irq_group(cs->gic, cs, cs->hppi.irq);
     }
 
+    if (cs->gic->lpi_enable) {
+        if (gicv3_redist_update_lpi(cs)) {
+            seenbetter = true;
+        }
+    }
+
     /* If the best interrupt we just found would preempt whatever
      * was the previous best interrupt before this update, then
      * we know it's definitely the best one now.
diff --git a/hw/intc/arm_gicv3_cpuif.c b/hw/intc/arm_gicv3_cpuif.c
index 43ef1d7a84..11b1df5b6b 100644
--- a/hw/intc/arm_gicv3_cpuif.c
+++ b/hw/intc/arm_gicv3_cpuif.c
@@ -899,9 +899,14 @@ static void icc_activate_irq(GICv3CPUState *cs, int irq)
         cs->gicr_ipendr0 = deposit32(cs->gicr_ipendr0, irq, 1, 0);
         gicv3_redist_update(cs);
     } else {
-        gicv3_gicd_active_set(cs->gic, irq);
-        gicv3_gicd_pending_clear(cs->gic, irq);
-        gicv3_update(cs->gic, irq, 1);
+        if (irq >= GICV3_LPI_INTID_START) {
+            gicv3_redist_lpi_pending(cs, irq, 0);
+            gicv3_redist_update(cs);
+        } else {
+            gicv3_gicd_active_set(cs->gic, irq);
+            gicv3_gicd_pending_clear(cs->gic, irq);
+            gicv3_update(cs->gic, irq, 1);
+        }
     }
 }
 
@@ -1328,7 +1333,8 @@ static void icc_eoir_write(CPUARMState *env, const ARMCPRegInfo *ri,
         }
     }
 
-    if (irq >= cs->gic->num_irq) {
+    if ((irq >= cs->gic->num_irq) && (!(cs->gic->lpi_enable &&
+        (irq >= GICV3_LPI_INTID_START)))) {
         /* This handles two cases:
          * 1. If software writes the ID of a spurious interrupt [ie 1020-1023]
          * to the GICC_EOIR, the GIC ignores that write.
@@ -1348,7 +1354,11 @@ static void icc_eoir_write(CPUARMState *env, const ARMCPRegInfo *ri,
 
     if (!icc_eoi_split(env, cs)) {
         /* Priority drop and deactivate not split: deactivate irq now */
-        icc_deactivate_irq(cs, irq);
+        if (irq >= GICV3_LPI_INTID_START) {
+            gicv3_update(cs->gic, irq, 1);
+        } else {
+            icc_deactivate_irq(cs, irq);
+        }
     }
 }
 
diff --git a/hw/intc/arm_gicv3_its.c b/hw/intc/arm_gicv3_its.c
index 98c984dd22..28da2d1d77 100644
--- a/hw/intc/arm_gicv3_its.c
+++ b/hw/intc/arm_gicv3_its.c
@@ -219,6 +219,7 @@ static MemTxResult process_int(GICv3ITSState *s, uint64_t value,
     bool ite_valid = false;
     uint64_t cte = 0;
     bool cte_valid = false;
+    uint64_t rdbase;
     uint64_t itel = 0;
     uint32_t iteh = 0;
 
@@ -275,10 +276,13 @@ static MemTxResult process_int(GICv3ITSState *s, uint64_t value,
          * command in the queue
          */
     } else {
-        /*
-         * Current implementation only supports rdbase == procnum
-         * Hence rdbase physical address is ignored
-         */
+        rdbase = (cte >> 1U) & RDBASE_PROCNUM_MASK;
+        if ((cmd == CLEAR) || (cmd == DISCARD)) {
+            gicv3_redist_process_lpi(&s->gicv3->cpu[rdbase], pIntid, 0);
+        } else {
+            gicv3_redist_process_lpi(&s->gicv3->cpu[rdbase], pIntid, 1);
+        }
+
         if (cmd == DISCARD) {
             /* remove mapping from interrupt translation table */
             res = update_ite(s, eventid, dte, itel, iteh);
diff --git a/hw/intc/arm_gicv3_redist.c b/hw/intc/arm_gicv3_redist.c
index 7604ccdc83..82ca9d71e5 100644
--- a/hw/intc/arm_gicv3_redist.c
+++ b/hw/intc/arm_gicv3_redist.c
@@ -256,6 +256,8 @@ static MemTxResult gicr_writel(GICv3CPUState *cs, hwaddr offset,
         if (cs->gicr_typer & GICR_TYPER_PLPIS) {
             if (value & GICR_CTLR_ENABLE_LPIS) {
                 cs->gicr_ctlr |= GICR_CTLR_ENABLE_LPIS;
+                /* Check for any pending interr in pending table */
+                gicv3_redist_update(cs);
             } else {
                 cs->gicr_ctlr &= ~GICR_CTLR_ENABLE_LPIS;
             }
@@ -546,6 +548,137 @@ MemTxResult gicv3_redist_write(void *opaque, hwaddr offset, uint64_t data,
     return r;
 }
 
+bool gicv3_redist_update_lpi(GICv3CPUState *cs)
+{
+    /*
+     * This function scans the LPI pending table and for each pending
+     * LPI, reads the corresponding entry from LPI configuration table
+     * to extract the priority info and determine if the LPI priority
+     * is lower than the current high priority interrupt.If yes, update
+     * high priority pending interrupt to that of LPI.
+     */
+    AddressSpace *as = &cs->gic->dma_as;
+    uint64_t lpict_baddr, lpipt_baddr;
+    uint32_t pendt_size = 0;
+    uint8_t lpite;
+    uint8_t prio, pend;
+    int i;
+    bool seenbetter = false;
+
+    if ((!cs->gicr_ctlr & GICR_CTLR_ENABLE_LPIS) || !cs->gicr_propbaser ||
+        !cs->gicr_pendbaser || (FIELD_EX64(cs->gicr_propbaser, GICR_PROPBASER,
+        IDBITS) < GICR_PROPBASER_IDBITS_THRESHOLD)) {
+        return seenbetter;
+    }
+
+    lpict_baddr = FIELD_EX64(cs->gicr_propbaser, GICR_PROPBASER, PHYADDR);
+    lpict_baddr <<= R_GICR_PROPBASER_PHYADDR_SHIFT;
+
+    lpipt_baddr =  FIELD_EX64(cs->gicr_pendbaser, GICR_PENDBASER, PHYADDR);
+    lpipt_baddr <<= R_GICR_PENDBASER_PHYADDR_SHIFT;
+
+    /* Determine the highest priority pending interrupt among LPIs */
+    pendt_size = (1UL << (FIELD_EX64(cs->gicr_propbaser, GICR_PROPBASER,
+                          IDBITS) - 1));
+
+    for (i = 0; i < pendt_size; i++) {
+        address_space_read(as, lpipt_baddr +
+                (((GICV3_LPI_INTID_START + i) / 8) * sizeof(pend)),
+                MEMTXATTRS_UNSPECIFIED, &pend, sizeof(pend));
+
+        if ((1 << ((GICV3_LPI_INTID_START + i) % 8)) & pend) {
+            address_space_read(as, lpict_baddr + (i * sizeof(lpite)),
+                      MEMTXATTRS_UNSPECIFIED, &lpite, sizeof(lpite));
+
+            prio = ((lpite >> LPI_CTE_PRIORITY_OFFSET) &
+                     LPI_CTE_PRIORITY_MASK);
+            prio &= LPI_PRIORITY_MASK;
+
+            if (prio < cs->hppi.prio) {
+                cs->hppi.irq = GICV3_LPI_INTID_START + i;
+                cs->hppi.prio = prio;
+                /* LPIs are always non-secure Grp1 interrupts */
+                cs->hppi.grp = GICV3_G1NS;
+                seenbetter = true;
+            }
+        }
+    }
+    return seenbetter;
+}
+
+void gicv3_redist_lpi_pending(GICv3CPUState *cs, int irq, int level)
+{
+    AddressSpace *as = &cs->gic->dma_as;
+    uint64_t lpipt_baddr;
+    bool ispend = false;
+    uint8_t pend;
+
+    /*
+     * get the bit value corresponding to this irq in the
+     * lpi pending table
+     */
+    lpipt_baddr = FIELD_EX64(cs->gicr_pendbaser, GICR_PENDBASER, PHYADDR);
+    lpipt_baddr <<= R_GICR_PENDBASER_PHYADDR_SHIFT;
+
+    address_space_read(as, lpipt_baddr + ((irq / 8) * sizeof(pend)),
+                         MEMTXATTRS_UNSPECIFIED, &pend, sizeof(pend));
+    ispend = ((pend >> (irq % 8)) & 0x1);
+
+    if (ispend) {
+        if (!level) {
+            /*
+             * clear the pending bit and update the lpi pending table
+             */
+            pend &= ~(1 << (irq % 8));
+
+            address_space_write(as, lpipt_baddr + ((irq / 8) * sizeof(pend)),
+                                 MEMTXATTRS_UNSPECIFIED, &pend, sizeof(pend));
+        }
+    } else {
+        if (level) {
+            /*
+             * if pending bit is not already set for this irq,turn-on the
+             * pending bit and update the lpi pending table
+             */
+            pend |= (1 << (irq % 8));
+
+            address_space_write(as, lpipt_baddr + ((irq / 8) * sizeof(pend)),
+                                 MEMTXATTRS_UNSPECIFIED, &pend, sizeof(pend));
+        }
+    }
+}
+
+void gicv3_redist_process_lpi(GICv3CPUState *cs, int irq, int level)
+{
+    AddressSpace *as = &cs->gic->dma_as;
+    uint64_t lpict_baddr;
+    uint8_t lpite;
+
+    if ((!cs->gicr_ctlr & GICR_CTLR_ENABLE_LPIS) || !cs->gicr_propbaser ||
+         !cs->gicr_pendbaser || (FIELD_EX64(cs->gicr_propbaser, GICR_PROPBASER,
+         IDBITS) < GICR_PROPBASER_IDBITS_THRESHOLD)) {
+        return;
+    }
+
+    lpict_baddr = FIELD_EX64(cs->gicr_propbaser, GICR_PROPBASER, PHYADDR);
+    lpict_baddr <<= R_GICR_PROPBASER_PHYADDR_SHIFT;
+
+    /* get the lpi config table entry corresponding to this irq */
+    address_space_read(as, lpict_baddr + ((irq - GICV3_LPI_INTID_START) *
+                        sizeof(lpite)), MEMTXATTRS_UNSPECIFIED,
+                        &lpite, sizeof(lpite));
+
+    /* check if this irq is enabled before proceeding further */
+    if (!(lpite & LPI_CTE_ENABLED)) {
+        return;
+    }
+
+    /* set/clear the pending bit for this irq */
+    gicv3_redist_lpi_pending(cs, irq, level);
+
+    gicv3_redist_update(cs);
+}
+
 void gicv3_redist_set_irq(GICv3CPUState *cs, int irq, int level)
 {
     /* Update redistributor state for a change in an external PPI input line */
diff --git a/hw/intc/gicv3_internal.h b/hw/intc/gicv3_internal.h
index c99a05461e..dcdad8d0af 100644
--- a/hw/intc/gicv3_internal.h
+++ b/hw/intc/gicv3_internal.h
@@ -308,6 +308,12 @@ FIELD(GITS_TYPER, CIL, 36, 1)
 
 #define L1TABLE_ENTRY_SIZE         8
 
+#define LPI_CTE_ENABLE_OFFSET      0
+#define LPI_CTE_ENABLED          VALID_MASK
+#define LPI_CTE_PRIORITY_OFFSET    2
+#define LPI_CTE_PRIORITY_MASK     ((1U << 6) - 1)
+#define LPI_PRIORITY_MASK         0xfc
+
 #define GITS_CMDQ_ENTRY_SIZE               32
 #define NUM_BYTES_IN_DW                     8
 
@@ -453,6 +459,9 @@ MemTxResult gicv3_redist_write(void *opaque, hwaddr offset, uint64_t data,
                                unsigned size, MemTxAttrs attrs);
 void gicv3_dist_set_irq(GICv3State *s, int irq, int level);
 void gicv3_redist_set_irq(GICv3CPUState *cs, int irq, int level);
+void gicv3_redist_process_lpi(GICv3CPUState *cs, int irq, int level);
+void gicv3_redist_lpi_pending(GICv3CPUState *cs, int irq, int level);
+bool gicv3_redist_update_lpi(GICv3CPUState *cs);
 void gicv3_redist_send_sgi(GICv3CPUState *cs, int grp, int irq, bool ns);
 void gicv3_init_cpuif(GICv3State *s);
 
-- 
2.27.0



  parent reply	other threads:[~2021-04-29 23:50 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-04-29 23:41 [PATCH v3 0/8] GICv3 LPI and ITS feature implementation Shashi Mallela
2021-04-29 23:41 ` [PATCH v3 1/8] hw/intc: GICv3 ITS initial framework Shashi Mallela
2021-05-18 13:52   ` Peter Maydell
2021-04-29 23:41 ` [PATCH v3 2/8] hw/intc: GICv3 ITS register definitions added Shashi Mallela
2021-05-18 14:27   ` Peter Maydell
2021-04-29 23:41 ` [PATCH v3 3/8] hw/intc: GICv3 ITS command queue framework Shashi Mallela
2021-05-18 15:43   ` Peter Maydell
2021-04-29 23:41 ` [PATCH v3 4/8] hw/intc: GICv3 ITS Command processing Shashi Mallela
2021-05-18 15:49   ` Peter Maydell
2021-05-25 17:57     ` shashi.mallela
2021-04-29 23:41 ` [PATCH v3 5/8] hw/intc: GICv3 ITS Feature enablement Shashi Mallela
2021-05-18 15:58   ` Peter Maydell
2021-04-29 23:41 ` Shashi Mallela [this message]
2021-05-20 11:01   ` [PATCH v3 6/8] hw/intc: GICv3 redistributor ITS processing Peter Maydell
2021-05-25 17:58     ` shashi.mallela
2021-04-29 23:42 ` [PATCH v3 7/8] hw/arm/sbsa-ref: add ITS support in SBSA GIC Shashi Mallela
2021-05-18 16:03   ` Peter Maydell
2021-04-29 23:42 ` [PATCH v3 8/8] hw/arm/virt: add ITS support in virt GIC Shashi Mallela
2021-05-18 16:06   ` Peter Maydell
2021-05-18 13:41 ` [PATCH v3 0/8] GICv3 LPI and ITS feature implementation Peter Maydell
2021-05-18 14:46 ` Peter Maydell
2021-06-02 17:55   ` Shashi Mallela
2021-05-25 18:26 ` Alex Bennée
2021-05-25 19:30   ` Alex Bennée
2021-05-27  0:22     ` shashi.mallela

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210429234201.125565-7-shashi.mallela@linaro.org \
    --to=shashi.mallela@linaro.org \
    --cc=leif@nuviainc.com \
    --cc=peter.maydell@linaro.org \
    --cc=qemu-arm@nongnu.org \
    --cc=qemu-devel@nongnu.org \
    --cc=rad@semihalf.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).