[PATCH v2 1/8] hw/riscv: sifive_u: Switch to use qemu_fdt_setprop_string_array() helper

[PATCH v2 1/8] hw/riscv: sifive_u: Switch to use qemu_fdt_setprop_string_array() helper

[Bin Meng]

From: Bin Meng <bin.meng@windriver.com>

Since commit 78da6a1bca22 ("device_tree: add qemu_fdt_setprop_string_array helper"),
we can use the new helper to set the clock name for the ethernet
controller node.

Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
---

Changes in v2:
- use "static const char * const" for ethclk_names

 hw/riscv/sifive_u.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/hw/riscv/sifive_u.c b/hw/riscv/sifive_u.c
index 7b59942369..1b8af0c07a 100644
--- a/hw/riscv/sifive_u.c
+++ b/hw/riscv/sifive_u.c
@@ -96,9 +96,9 @@ static void create_fdt(SiFiveUState *s, const MemMapEntry *memmap,
     int cpu;
     uint32_t *cells;
     char *nodename;
-    char ethclk_names[] = "pclk\0hclk";
     uint32_t plic_phandle, prci_phandle, gpio_phandle, phandle = 1;
     uint32_t hfclk_phandle, rtcclk_phandle, phy_phandle;
+    static const char * const ethclk_names[2] = { "pclk", "hclk" };
 
     if (ms->dtb) {
         fdt = s->fdt = load_device_tree(ms->dtb, &s->fdt_size);
@@ -413,8 +413,8 @@ static void create_fdt(SiFiveUState *s, const MemMapEntry *memmap,
     qemu_fdt_setprop_cell(fdt, nodename, "interrupts", SIFIVE_U_GEM_IRQ);
     qemu_fdt_setprop_cells(fdt, nodename, "clocks",
         prci_phandle, PRCI_CLK_GEMGXLPLL, prci_phandle, PRCI_CLK_GEMGXLPLL);
-    qemu_fdt_setprop(fdt, nodename, "clock-names", ethclk_names,
-        sizeof(ethclk_names));
+    qemu_fdt_setprop_string_array(fdt, nodename, "clock-names",
+        (char **)&ethclk_names, ARRAY_SIZE(ethclk_names));
     qemu_fdt_setprop(fdt, nodename, "local-mac-address",
         s->soc.gem.conf.macaddr.a, ETH_ALEN);
     qemu_fdt_setprop_cell(fdt, nodename, "#address-cells", 1);
-- 
2.25.1

[PATCH v2 2/8] hw/riscv: virt: Switch to use qemu_fdt_setprop_string_array() helper

[Bin Meng]

From: Bin Meng <bin.meng@windriver.com>

Since commit 78da6a1bca22 ("device_tree: add qemu_fdt_setprop_string_array helper"),
we can use the new helper to set the compatible strings for the
SiFive test device node.

Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
---

Changes in v2:
- use "static const char * const" for compat

 hw/riscv/virt.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/hw/riscv/virt.c b/hw/riscv/virt.c
index c0dc69ff33..992f1c58a9 100644
--- a/hw/riscv/virt.c
+++ b/hw/riscv/virt.c
@@ -395,8 +395,11 @@ static void create_fdt(RISCVVirtState *s, const MemMapEntry *memmap,
         (long)memmap[VIRT_TEST].base);
     qemu_fdt_add_subnode(fdt, name);
     {
-        const char compat[] = "sifive,test1\0sifive,test0\0syscon";
-        qemu_fdt_setprop(fdt, name, "compatible", compat, sizeof(compat));
+        static const char * const compat[3] = {
+            "sifive,test1", "sifive,test0", "syscon"
+        };
+        qemu_fdt_setprop_string_array(fdt, name, "compatible", (char **)&compat,
+                                      ARRAY_SIZE(compat));
     }
     qemu_fdt_setprop_cells(fdt, name, "reg",
         0x0, memmap[VIRT_TEST].base,
-- 
2.25.1

[PATCH v2 3/8] hw/riscv: Support the official CLINT DT bindings

[Bin Meng]

From: Bin Meng <bin.meng@windriver.com>

Linux kernel commit a2770b57d083 ("dt-bindings: timer: Add CLINT bindings")
adds the official DT bindings for CLINT, which uses "sifive,clint0"
as the compatible string. "riscv,clint0" is now legacy and has to
be kept for backward compatibility of legacy systems.

Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
---

Changes in v2:
- use "static const char * const" for clint_compat

 hw/riscv/sifive_u.c | 6 +++++-
 hw/riscv/spike.c    | 6 +++++-
 hw/riscv/virt.c     | 6 +++++-
 3 files changed, 15 insertions(+), 3 deletions(-)

diff --git a/hw/riscv/sifive_u.c b/hw/riscv/sifive_u.c
index 1b8af0c07a..fd5cf7513b 100644
--- a/hw/riscv/sifive_u.c
+++ b/hw/riscv/sifive_u.c
@@ -99,6 +99,9 @@ static void create_fdt(SiFiveUState *s, const MemMapEntry *memmap,
     uint32_t plic_phandle, prci_phandle, gpio_phandle, phandle = 1;
     uint32_t hfclk_phandle, rtcclk_phandle, phy_phandle;
     static const char * const ethclk_names[2] = { "pclk", "hclk" };
+    static const char * const clint_compat[2] = {
+        "sifive,clint0", "riscv,clint0"
+    };
 
     if (ms->dtb) {
         fdt = s->fdt = load_device_tree(ms->dtb, &s->fdt_size);
@@ -210,7 +213,8 @@ static void create_fdt(SiFiveUState *s, const MemMapEntry *memmap,
     nodename = g_strdup_printf("/soc/clint@%lx",
         (long)memmap[SIFIVE_U_DEV_CLINT].base);
     qemu_fdt_add_subnode(fdt, nodename);
-    qemu_fdt_setprop_string(fdt, nodename, "compatible", "riscv,clint0");
+    qemu_fdt_setprop_string_array(fdt, nodename, "compatible",
+        (char **)&clint_compat, ARRAY_SIZE(clint_compat));
     qemu_fdt_setprop_cells(fdt, nodename, "reg",
         0x0, memmap[SIFIVE_U_DEV_CLINT].base,
         0x0, memmap[SIFIVE_U_DEV_CLINT].size);
diff --git a/hw/riscv/spike.c b/hw/riscv/spike.c
index ec7cb2f707..f094bb2158 100644
--- a/hw/riscv/spike.c
+++ b/hw/riscv/spike.c
@@ -60,6 +60,9 @@ static void create_fdt(SpikeState *s, const MemMapEntry *memmap,
     uint32_t cpu_phandle, intc_phandle, phandle = 1;
     char *name, *mem_name, *clint_name, *clust_name;
     char *core_name, *cpu_name, *intc_name;
+    static const char * const clint_compat[2] = {
+        "sifive,clint0", "riscv,clint0"
+    };
 
     fdt = s->fdt = create_device_tree(&s->fdt_size);
     if (!fdt) {
@@ -153,7 +156,8 @@ static void create_fdt(SpikeState *s, const MemMapEntry *memmap,
             (memmap[SPIKE_CLINT].size * socket);
         clint_name = g_strdup_printf("/soc/clint@%lx", clint_addr);
         qemu_fdt_add_subnode(fdt, clint_name);
-        qemu_fdt_setprop_string(fdt, clint_name, "compatible", "riscv,clint0");
+        qemu_fdt_setprop_string_array(fdt, clint_name, "compatible",
+            (char **)&clint_compat, ARRAY_SIZE(clint_compat));
         qemu_fdt_setprop_cells(fdt, clint_name, "reg",
             0x0, clint_addr, 0x0, memmap[SPIKE_CLINT].size);
         qemu_fdt_setprop(fdt, clint_name, "interrupts-extended",
diff --git a/hw/riscv/virt.c b/hw/riscv/virt.c
index 992f1c58a9..4b32dc734f 100644
--- a/hw/riscv/virt.c
+++ b/hw/riscv/virt.c
@@ -195,6 +195,9 @@ static void create_fdt(RISCVVirtState *s, const MemMapEntry *memmap,
     char *name, *clint_name, *plic_name, *clust_name;
     hwaddr flashsize = virt_memmap[VIRT_FLASH].size / 2;
     hwaddr flashbase = virt_memmap[VIRT_FLASH].base;
+    static const char * const clint_compat[2] = {
+        "sifive,clint0", "riscv,clint0"
+    };
 
     if (mc->dtb) {
         fdt = mc->fdt = load_device_tree(mc->dtb, &s->fdt_size);
@@ -300,7 +303,8 @@ static void create_fdt(RISCVVirtState *s, const MemMapEntry *memmap,
             (memmap[VIRT_CLINT].size * socket);
         clint_name = g_strdup_printf("/soc/clint@%lx", clint_addr);
         qemu_fdt_add_subnode(fdt, clint_name);
-        qemu_fdt_setprop_string(fdt, clint_name, "compatible", "riscv,clint0");
+        qemu_fdt_setprop_string_array(fdt, clint_name, "compatible",
+            (char **)&clint_compat, ARRAY_SIZE(clint_compat));
         qemu_fdt_setprop_cells(fdt, clint_name, "reg",
             0x0, clint_addr, 0x0, memmap[VIRT_CLINT].size);
         qemu_fdt_setprop(fdt, clint_name, "interrupts-extended",
-- 
2.25.1

[PATCH v2 4/8] hw/riscv: Support the official PLIC DT bindings

[Bin Meng]

From: Bin Meng <bin.meng@windriver.com>

The official DT bindings of PLIC uses "sifive,plic-1.0.0" as the
compatible string in the upstream Linux kernel. "riscv,plic0" is
now legacy and has to be kept for backward compatibility of legacy
systems.

Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
---

Changes in v2:
- use "static const char * const" for plic_compat

 hw/riscv/sifive_u.c | 6 +++++-
 hw/riscv/virt.c     | 6 +++++-
 2 files changed, 10 insertions(+), 2 deletions(-)

diff --git a/hw/riscv/sifive_u.c b/hw/riscv/sifive_u.c
index fd5cf7513b..b55e56890c 100644
--- a/hw/riscv/sifive_u.c
+++ b/hw/riscv/sifive_u.c
@@ -102,6 +102,9 @@ static void create_fdt(SiFiveUState *s, const MemMapEntry *memmap,
     static const char * const clint_compat[2] = {
         "sifive,clint0", "riscv,clint0"
     };
+    static const char * const plic_compat[2] = {
+        "sifive,plic-1.0.0", "riscv,plic0"
+    };
 
     if (ms->dtb) {
         fdt = s->fdt = load_device_tree(ms->dtb, &s->fdt_size);
@@ -271,7 +274,8 @@ static void create_fdt(SiFiveUState *s, const MemMapEntry *memmap,
         (long)memmap[SIFIVE_U_DEV_PLIC].base);
     qemu_fdt_add_subnode(fdt, nodename);
     qemu_fdt_setprop_cell(fdt, nodename, "#interrupt-cells", 1);
-    qemu_fdt_setprop_string(fdt, nodename, "compatible", "riscv,plic0");
+    qemu_fdt_setprop_string_array(fdt, nodename, "compatible",
+        (char **)&plic_compat, ARRAY_SIZE(plic_compat));
     qemu_fdt_setprop(fdt, nodename, "interrupt-controller", NULL, 0);
     qemu_fdt_setprop(fdt, nodename, "interrupts-extended",
         cells, (ms->smp.cpus * 4 - 2) * sizeof(uint32_t));
diff --git a/hw/riscv/virt.c b/hw/riscv/virt.c
index 4b32dc734f..8a8ff04dab 100644
--- a/hw/riscv/virt.c
+++ b/hw/riscv/virt.c
@@ -198,6 +198,9 @@ static void create_fdt(RISCVVirtState *s, const MemMapEntry *memmap,
     static const char * const clint_compat[2] = {
         "sifive,clint0", "riscv,clint0"
     };
+    static const char * const plic_compat[2] = {
+        "sifive,plic-1.0.0", "riscv,plic0"
+    };
 
     if (mc->dtb) {
         fdt = mc->fdt = load_device_tree(mc->dtb, &s->fdt_size);
@@ -320,7 +323,8 @@ static void create_fdt(RISCVVirtState *s, const MemMapEntry *memmap,
             "#address-cells", FDT_PLIC_ADDR_CELLS);
         qemu_fdt_setprop_cell(fdt, plic_name,
             "#interrupt-cells", FDT_PLIC_INT_CELLS);
-        qemu_fdt_setprop_string(fdt, plic_name, "compatible", "riscv,plic0");
+        qemu_fdt_setprop_string_array(fdt, plic_name, "compatible",
+            (char **)&plic_compat, ARRAY_SIZE(plic_compat));
         qemu_fdt_setprop(fdt, plic_name, "interrupt-controller", NULL, 0);
         qemu_fdt_setprop(fdt, plic_name, "interrupts-extended",
             plic_cells, s->soc[socket].num_harts * sizeof(uint32_t) * 4);
-- 
2.25.1

[PATCH v2 5/8] docs/system/riscv: Correct the indentation level of supported devices

[Bin Meng]

From: Bin Meng <bin.meng@windriver.com>

The supported device bullet list has an additional space before each
entry, which makes a wrong indentation level. Correct it.

Signed-off-by: Bin Meng <bin.meng@windriver.com>
---

(no changes since v1)

 docs/system/riscv/microchip-icicle-kit.rst | 20 +++++++--------
 docs/system/riscv/sifive_u.rst             | 30 +++++++++++-----------
 2 files changed, 25 insertions(+), 25 deletions(-)

diff --git a/docs/system/riscv/microchip-icicle-kit.rst b/docs/system/riscv/microchip-icicle-kit.rst
index 4fe97bce3f..e803131763 100644
--- a/docs/system/riscv/microchip-icicle-kit.rst
+++ b/docs/system/riscv/microchip-icicle-kit.rst
@@ -15,16 +15,16 @@ Supported devices
 
 The ``microchip-icicle-kit`` machine supports the following devices:
 
- * 1 E51 core
- * 4 U54 cores
- * Core Level Interruptor (CLINT)
- * Platform-Level Interrupt Controller (PLIC)
- * L2 Loosely Integrated Memory (L2-LIM)
- * DDR memory controller
- * 5 MMUARTs
- * 1 DMA controller
- * 2 GEM Ethernet controllers
- * 1 SDHC storage controller
+* 1 E51 core
+* 4 U54 cores
+* Core Level Interruptor (CLINT)
+* Platform-Level Interrupt Controller (PLIC)
+* L2 Loosely Integrated Memory (L2-LIM)
+* DDR memory controller
+* 5 MMUARTs
+* 1 DMA controller
+* 2 GEM Ethernet controllers
+* 1 SDHC storage controller
 
 Boot options
 ------------
diff --git a/docs/system/riscv/sifive_u.rst b/docs/system/riscv/sifive_u.rst
index 98e7562848..dcdfbda931 100644
--- a/docs/system/riscv/sifive_u.rst
+++ b/docs/system/riscv/sifive_u.rst
@@ -9,21 +9,21 @@ Supported devices
 
 The ``sifive_u`` machine supports the following devices:
 
- * 1 E51 / E31 core
- * Up to 4 U54 / U34 cores
- * Core Level Interruptor (CLINT)
- * Platform-Level Interrupt Controller (PLIC)
- * Power, Reset, Clock, Interrupt (PRCI)
- * L2 Loosely Integrated Memory (L2-LIM)
- * DDR memory controller
- * 2 UARTs
- * 1 GEM Ethernet controller
- * 1 GPIO controller
- * 1 One-Time Programmable (OTP) memory with stored serial number
- * 1 DMA controller
- * 2 QSPI controllers
- * 1 ISSI 25WP256 flash
- * 1 SD card in SPI mode
+* 1 E51 / E31 core
+* Up to 4 U54 / U34 cores
+* Core Level Interruptor (CLINT)
+* Platform-Level Interrupt Controller (PLIC)
+* Power, Reset, Clock, Interrupt (PRCI)
+* L2 Loosely Integrated Memory (L2-LIM)
+* DDR memory controller
+* 2 UARTs
+* 1 GEM Ethernet controller
+* 1 GPIO controller
+* 1 One-Time Programmable (OTP) memory with stored serial number
+* 1 DMA controller
+* 2 QSPI controllers
+* 1 ISSI 25WP256 flash
+* 1 SD card in SPI mode
 
 Please note the real world HiFive Unleashed board has a fixed configuration of
 1 E51 core and 4 U54 core combination and the RISC-V core boots in 64-bit mode.
-- 
2.25.1

[PATCH v2 6/8] docs/system/riscv: sifive_u: Document '-dtb' usage

[Bin Meng]

From: Bin Meng <bin.meng@windriver.com>

Update the 'sifive_u' machine documentation to mention the '-dtb'
option that can be used to pass a custom DTB to QEMU.

Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
---

(no changes since v1)

 docs/system/riscv/sifive_u.rst | 47 +++++++++++++++++++++++++++++-----
 1 file changed, 41 insertions(+), 6 deletions(-)

diff --git a/docs/system/riscv/sifive_u.rst b/docs/system/riscv/sifive_u.rst
index dcdfbda931..32d0a1b85d 100644
--- a/docs/system/riscv/sifive_u.rst
+++ b/docs/system/riscv/sifive_u.rst
@@ -36,12 +36,21 @@ Hardware configuration information
 ----------------------------------
 
 The ``sifive_u`` machine automatically generates a device tree blob ("dtb")
-which it passes to the guest. This provides information about the addresses,
-interrupt lines and other configuration of the various devices in the system.
-Guest software should discover the devices that are present in the generated
-DTB instead of using a DTB for the real hardware, as some of the devices are
-not modeled by QEMU and trying to access these devices may cause unexpected
-behavior.
+which it passes to the guest, if there is no ``-dtb`` option. This provides
+information about the addresses, interrupt lines and other configuration of
+the various devices in the system. Guest software should discover the devices
+that are present in the generated DTB instead of using a DTB for the real
+hardware, as some of the devices are not modeled by QEMU and trying to access
+these devices may cause unexpected behavior.
+
+If users want to provide their own DTB, they can use the ``-dtb`` option.
+These DTBs should have the following requirements:
+
+* The /cpus node should contain at least one subnode for E51 and the number
+  of subnodes should match QEMU's ``-smp`` option
+* The /memory reg size should match QEMU’s selected ram_size via ``-m``
+* Should contain a node for the CLINT device with a compatible string
+  "riscv,clint0" if using with OpenSBI BIOS images
 
 Boot options
 ------------
@@ -122,6 +131,32 @@ To boot the newly built Linux kernel in QEMU with the ``sifive_u`` machine:
       -initrd /path/to/rootfs.ext4 \
       -append "root=/dev/ram"
 
+Alternatively, we can use a custom DTB to boot the machine by inserting a CLINT
+node in fu540-c000.dtsi in the Linux kernel,
+
+.. code-block:: none
+
+    clint: clint@2000000 {
+        compatible = "riscv,clint0";
+        interrupts-extended = <&cpu0_intc 3 &cpu0_intc 7
+                               &cpu1_intc 3 &cpu1_intc 7
+                               &cpu2_intc 3 &cpu2_intc 7
+                               &cpu3_intc 3 &cpu3_intc 7
+                               &cpu4_intc 3 &cpu4_intc 7>;
+        reg = <0x00 0x2000000 0x00 0x10000>;
+    };
+
+with the following command line options:
+
+.. code-block:: bash
+
+  $ qemu-system-riscv64 -M sifive_u -smp 5 -m 8G \
+      -display none -serial stdio \
+      -kernel arch/riscv/boot/Image \
+      -dtb arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dtb \
+      -initrd /path/to/rootfs.ext4 \
+      -append "root=/dev/ram"
+
 To build a Linux mainline kernel that can be booted by the ``sifive_u`` machine
 in 32-bit mode, use the rv32_defconfig configuration. A patch is required to
 fix the 32-bit boot issue for Linux kernel v5.10.
-- 
2.25.1

[PATCH v2 7/8] hw/riscv: Use macros for BIOS image names

[Bin Meng]

From: Bin Meng <bin.meng@windriver.com>

The OpenSBI BIOS image names are used by many RISC-V machines.
Let's define macros for them.

Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
---

(no changes since v1)

 include/hw/riscv/boot.h | 5 +++++
 hw/riscv/sifive_u.c     | 6 ++----
 hw/riscv/spike.c        | 6 ++----
 hw/riscv/virt.c         | 6 ++----
 4 files changed, 11 insertions(+), 12 deletions(-)

diff --git a/include/hw/riscv/boot.h b/include/hw/riscv/boot.h
index 11a21dd584..0e89400b09 100644
--- a/include/hw/riscv/boot.h
+++ b/include/hw/riscv/boot.h
@@ -24,6 +24,11 @@
 #include "hw/loader.h"
 #include "hw/riscv/riscv_hart.h"
 
+#define RISCV32_BIOS_BIN    "opensbi-riscv32-generic-fw_dynamic.bin"
+#define RISCV32_BIOS_ELF    "opensbi-riscv32-generic-fw_dynamic.elf"
+#define RISCV64_BIOS_BIN    "opensbi-riscv64-generic-fw_dynamic.bin"
+#define RISCV64_BIOS_ELF    "opensbi-riscv64-generic-fw_dynamic.elf"
+
 bool riscv_is_32bit(RISCVHartArrayState *harts);
 
 target_ulong riscv_calc_kernel_start_addr(RISCVHartArrayState *harts,
diff --git a/hw/riscv/sifive_u.c b/hw/riscv/sifive_u.c
index b55e56890c..f30cc8004b 100644
--- a/hw/riscv/sifive_u.c
+++ b/hw/riscv/sifive_u.c
@@ -561,12 +561,10 @@ static void sifive_u_machine_init(MachineState *machine)
 
     if (riscv_is_32bit(&s->soc.u_cpus)) {
         firmware_end_addr = riscv_find_and_load_firmware(machine,
-                                    "opensbi-riscv32-generic-fw_dynamic.bin",
-                                    start_addr, NULL);
+                                    RISCV32_BIOS_BIN, start_addr, NULL);
     } else {
         firmware_end_addr = riscv_find_and_load_firmware(machine,
-                                    "opensbi-riscv64-generic-fw_dynamic.bin",
-                                    start_addr, NULL);
+                                    RISCV64_BIOS_BIN, start_addr, NULL);
     }
 
     if (machine->kernel_filename) {
diff --git a/hw/riscv/spike.c b/hw/riscv/spike.c
index f094bb2158..98932fba62 100644
--- a/hw/riscv/spike.c
+++ b/hw/riscv/spike.c
@@ -259,13 +259,11 @@ static void spike_board_init(MachineState *machine)
      */
     if (riscv_is_32bit(&s->soc[0])) {
         firmware_end_addr = riscv_find_and_load_firmware(machine,
-                                    "opensbi-riscv32-generic-fw_dynamic.elf",
-                                    memmap[SPIKE_DRAM].base,
+                                    RISCV32_BIOS_ELF, memmap[SPIKE_DRAM].base,
                                     htif_symbol_callback);
     } else {
         firmware_end_addr = riscv_find_and_load_firmware(machine,
-                                    "opensbi-riscv64-generic-fw_dynamic.elf",
-                                    memmap[SPIKE_DRAM].base,
+                                    RISCV64_BIOS_ELF, memmap[SPIKE_DRAM].base,
                                     htif_symbol_callback);
     }
 
diff --git a/hw/riscv/virt.c b/hw/riscv/virt.c
index 8a8ff04dab..b03c5f8b5b 100644
--- a/hw/riscv/virt.c
+++ b/hw/riscv/virt.c
@@ -682,12 +682,10 @@ static void virt_machine_init(MachineState *machine)
 
     if (riscv_is_32bit(&s->soc[0])) {
         firmware_end_addr = riscv_find_and_load_firmware(machine,
-                                    "opensbi-riscv32-generic-fw_dynamic.bin",
-                                    start_addr, NULL);
+                                    RISCV32_BIOS_BIN, start_addr, NULL);
     } else {
         firmware_end_addr = riscv_find_and_load_firmware(machine,
-                                    "opensbi-riscv64-generic-fw_dynamic.bin",
-                                    start_addr, NULL);
+                                    RISCV64_BIOS_BIN, start_addr, NULL);
     }
 
     if (machine->kernel_filename) {
-- 
2.25.1

[PATCH v2 8/8] hw/riscv: microchip_pfsoc: Support direct kernel boot

[Bin Meng]

From: Bin Meng <bin.meng@windriver.com>

At present the Microchip Icicle Kit machine only supports using
'-bios' to load the HSS, and does not support '-kernel' for direct
kernel booting just like other RISC-V machines do. One has to use
U-Boot which is chain-loaded by HSS, to load a kernel for testing.
This is not so convenient.

Adding '-kernel' support together with the existing '-bios', we
follow the following table to select which payload we execute:

  -bios |    -kernel | payload
  ------+------------+--------
      N |          N | HSS
      Y | don't care | HSS
      N |          Y | kernel

This ensures backwards compatibility with how we used to expose
'-bios' to users. When '-kernel' is used for direct boot, '-dtb'
must be present to provide a valid device tree for the board,
as we don't generate device tree.

When direct kernel boot is used, the OpenSBI fw_dynamic BIOS image
is used to boot a payload like U-Boot or OS kernel directly.

Documentation is updated to describe the direct kernel boot. Note
as of today there is still no PolarFire SoC support in the upstream
Linux kernel hence the document does not include instructions for
that. It will be updated in the future.

Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
---

(no changes since v1)

 docs/system/riscv/microchip-icicle-kit.rst | 30 ++++++--
 hw/riscv/microchip_pfsoc.c                 | 81 +++++++++++++++++++++-
 2 files changed, 103 insertions(+), 8 deletions(-)

diff --git a/docs/system/riscv/microchip-icicle-kit.rst b/docs/system/riscv/microchip-icicle-kit.rst
index e803131763..54ced661e3 100644
--- a/docs/system/riscv/microchip-icicle-kit.rst
+++ b/docs/system/riscv/microchip-icicle-kit.rst
@@ -31,17 +31,37 @@ Boot options
 
 The ``microchip-icicle-kit`` machine can start using the standard -bios
 functionality for loading its BIOS image, aka Hart Software Services (HSS_).
-HSS loads the second stage bootloader U-Boot from an SD card. It does not
-support direct kernel loading via the -kernel option. One has to load kernel
-from U-Boot.
+HSS loads the second stage bootloader U-Boot from an SD card. Then a kernel
+can be loaded from U-Boot. It also supports direct kernel booting via the
+-kernel option along with the device tree blob via -dtb. When direct kernel
+boot is used, the OpenSBI fw_dynamic BIOS image is used to boot a payload
+like U-Boot or OS kernel directly.
+
+The user provided DTB should have the following requirements:
+
+* The /cpus node should contain at least one subnode for E51 and the number
+  of subnodes should match QEMU's ``-smp`` option
+* The /memory reg size should match QEMU’s selected ram_size via ``-m``
+* Should contain a node for the CLINT device with a compatible string
+  "riscv,clint0"
+
+QEMU follows below truth table to select which payload to execute:
+
+=====  ========== =======
+-bios     -kernel payload
+=====  ========== =======
+    N           N     HSS
+    Y  don't care     HSS
+    N           Y  kernel
+=====  ========== =======
 
 The memory is set to 1537 MiB by default which is the minimum required high
 memory size by HSS. A sanity check on ram size is performed in the machine
 init routine to prompt user to increase the RAM size to > 1537 MiB when less
 than 1537 MiB ram is detected.
 
-Boot the machine
-----------------
+Running HSS
+-----------
 
 HSS 2020.12 release is tested at the time of writing. To build an HSS image
 that can be booted by the ``microchip-icicle-kit`` machine, type the following
diff --git a/hw/riscv/microchip_pfsoc.c b/hw/riscv/microchip_pfsoc.c
index c4146b7a6b..1919c09f2f 100644
--- a/hw/riscv/microchip_pfsoc.c
+++ b/hw/riscv/microchip_pfsoc.c
@@ -53,6 +53,7 @@
 #include "hw/riscv/microchip_pfsoc.h"
 #include "hw/intc/sifive_clint.h"
 #include "hw/intc/sifive_plic.h"
+#include "sysemu/device_tree.h"
 #include "sysemu/sysemu.h"
 
 /*
@@ -462,6 +463,12 @@ static void microchip_icicle_kit_machine_init(MachineState *machine)
     MemoryRegion *mem_high = g_new(MemoryRegion, 1);
     MemoryRegion *mem_high_alias = g_new(MemoryRegion, 1);
     uint64_t mem_high_size;
+    hwaddr firmware_load_addr;
+    const char *firmware_name;
+    bool kernel_as_payload = false;
+    target_ulong firmware_end_addr, kernel_start_addr;
+    uint64_t kernel_entry;
+    uint32_t fdt_load_addr;
     DriveInfo *dinfo = drive_get_next(IF_SD);
 
     /* Sanity check on RAM size */
@@ -506,9 +513,6 @@ static void microchip_icicle_kit_machine_init(MachineState *machine)
                                 memmap[MICROCHIP_PFSOC_DRAM_HI_ALIAS].base,
                                 mem_high_alias);
 
-    /* Load the firmware */
-    riscv_find_and_load_firmware(machine, BIOS_FILENAME, RESET_VECTOR, NULL);
-
     /* Attach an SD card */
     if (dinfo) {
         CadenceSDHCIState *sdhci = &(s->soc.sdhci);
@@ -518,6 +522,77 @@ static void microchip_icicle_kit_machine_init(MachineState *machine)
                                 &error_fatal);
         qdev_realize_and_unref(card, sdhci->bus, &error_fatal);
     }
+
+    /*
+     * We follow the following table to select which payload we execute.
+     *
+     *  -bios |    -kernel | payload
+     * -------+------------+--------
+     *      N |          N | HSS
+     *      Y | don't care | HSS
+     *      N |          Y | kernel
+     *
+     * This ensures backwards compatibility with how we used to expose -bios
+     * to users but allows them to run through direct kernel booting as well.
+     *
+     * When -kernel is used for direct boot, -dtb must be present to provide
+     * a valid device tree for the board, as we don't generate device tree.
+     */
+
+    if (machine->kernel_filename && machine->dtb) {
+        int fdt_size;
+        machine->fdt = load_device_tree(machine->dtb, &fdt_size);
+        if (!machine->fdt) {
+            error_report("load_device_tree() failed");
+            exit(1);
+        }
+
+        firmware_name = RISCV64_BIOS_BIN;
+        firmware_load_addr = memmap[MICROCHIP_PFSOC_DRAM_LO].base;
+        kernel_as_payload = true;
+    }
+
+    if (!kernel_as_payload) {
+        firmware_name = BIOS_FILENAME;
+        firmware_load_addr = RESET_VECTOR;
+    }
+
+    /* Load the firmware */
+    firmware_end_addr = riscv_find_and_load_firmware(machine, firmware_name,
+                                                     firmware_load_addr, NULL);
+
+    if (kernel_as_payload) {
+        kernel_start_addr = riscv_calc_kernel_start_addr(&s->soc.u_cpus,
+                                                         firmware_end_addr);
+
+        kernel_entry = riscv_load_kernel(machine->kernel_filename,
+                                         kernel_start_addr, NULL);
+
+        if (machine->initrd_filename) {
+            hwaddr start;
+            hwaddr end = riscv_load_initrd(machine->initrd_filename,
+                                           machine->ram_size, kernel_entry,
+                                           &start);
+            qemu_fdt_setprop_cell(machine->fdt, "/chosen",
+                                  "linux,initrd-start", start);
+            qemu_fdt_setprop_cell(machine->fdt, "/chosen",
+                                  "linux,initrd-end", end);
+        }
+
+        if (machine->kernel_cmdline) {
+            qemu_fdt_setprop_string(machine->fdt, "/chosen",
+                                    "bootargs", machine->kernel_cmdline);
+        }
+
+        /* Compute the fdt load address in dram */
+        fdt_load_addr = riscv_load_fdt(memmap[MICROCHIP_PFSOC_DRAM_LO].base,
+                                       machine->ram_size, machine->fdt);
+        /* Load the reset vector */
+        riscv_setup_rom_reset_vec(machine, &s->soc.u_cpus, firmware_load_addr,
+                                  memmap[MICROCHIP_PFSOC_ENVM_DATA].base,
+                                  memmap[MICROCHIP_PFSOC_ENVM_DATA].size,
+                                  kernel_entry, fdt_load_addr, machine->fdt);
+    }
 }
 
 static void microchip_icicle_kit_machine_class_init(ObjectClass *oc, void *data)
-- 
2.25.1

Re: [PATCH v2 5/8] docs/system/riscv: Correct the indentation level of supported devices

[Alistair Francis]

On Fri, Apr 30, 2021 at 5:18 PM Bin Meng <bmeng.cn@gmail.com> wrote:
>
> From: Bin Meng <bin.meng@windriver.com>
>
> The supported device bullet list has an additional space before each
> entry, which makes a wrong indentation level. Correct it.
>
> Signed-off-by: Bin Meng <bin.meng@windriver.com>

Reviewed-by: Alistair Francis <alistair.francis@wdc.com>

Alistair

> ---
>
> (no changes since v1)
>
>  docs/system/riscv/microchip-icicle-kit.rst | 20 +++++++--------
>  docs/system/riscv/sifive_u.rst             | 30 +++++++++++-----------
>  2 files changed, 25 insertions(+), 25 deletions(-)
>
> diff --git a/docs/system/riscv/microchip-icicle-kit.rst b/docs/system/riscv/microchip-icicle-kit.rst
> index 4fe97bce3f..e803131763 100644
> --- a/docs/system/riscv/microchip-icicle-kit.rst
> +++ b/docs/system/riscv/microchip-icicle-kit.rst
> @@ -15,16 +15,16 @@ Supported devices
>
>  The ``microchip-icicle-kit`` machine supports the following devices:
>
> - * 1 E51 core
> - * 4 U54 cores
> - * Core Level Interruptor (CLINT)
> - * Platform-Level Interrupt Controller (PLIC)
> - * L2 Loosely Integrated Memory (L2-LIM)
> - * DDR memory controller
> - * 5 MMUARTs
> - * 1 DMA controller
> - * 2 GEM Ethernet controllers
> - * 1 SDHC storage controller
> +* 1 E51 core
> +* 4 U54 cores
> +* Core Level Interruptor (CLINT)
> +* Platform-Level Interrupt Controller (PLIC)
> +* L2 Loosely Integrated Memory (L2-LIM)
> +* DDR memory controller
> +* 5 MMUARTs
> +* 1 DMA controller
> +* 2 GEM Ethernet controllers
> +* 1 SDHC storage controller
>
>  Boot options
>  ------------
> diff --git a/docs/system/riscv/sifive_u.rst b/docs/system/riscv/sifive_u.rst
> index 98e7562848..dcdfbda931 100644
> --- a/docs/system/riscv/sifive_u.rst
> +++ b/docs/system/riscv/sifive_u.rst
> @@ -9,21 +9,21 @@ Supported devices
>
>  The ``sifive_u`` machine supports the following devices:
>
> - * 1 E51 / E31 core
> - * Up to 4 U54 / U34 cores
> - * Core Level Interruptor (CLINT)
> - * Platform-Level Interrupt Controller (PLIC)
> - * Power, Reset, Clock, Interrupt (PRCI)
> - * L2 Loosely Integrated Memory (L2-LIM)
> - * DDR memory controller
> - * 2 UARTs
> - * 1 GEM Ethernet controller
> - * 1 GPIO controller
> - * 1 One-Time Programmable (OTP) memory with stored serial number
> - * 1 DMA controller
> - * 2 QSPI controllers
> - * 1 ISSI 25WP256 flash
> - * 1 SD card in SPI mode
> +* 1 E51 / E31 core
> +* Up to 4 U54 / U34 cores
> +* Core Level Interruptor (CLINT)
> +* Platform-Level Interrupt Controller (PLIC)
> +* Power, Reset, Clock, Interrupt (PRCI)
> +* L2 Loosely Integrated Memory (L2-LIM)
> +* DDR memory controller
> +* 2 UARTs
> +* 1 GEM Ethernet controller
> +* 1 GPIO controller
> +* 1 One-Time Programmable (OTP) memory with stored serial number
> +* 1 DMA controller
> +* 2 QSPI controllers
> +* 1 ISSI 25WP256 flash
> +* 1 SD card in SPI mode
>
>  Please note the real world HiFive Unleashed board has a fixed configuration of
>  1 E51 core and 4 U54 core combination and the RISC-V core boots in 64-bit mode.
> --
> 2.25.1
>
>

Re: [PATCH v2 1/8] hw/riscv: sifive_u: Switch to use qemu_fdt_setprop_string_array() helper

[Bin Meng]

On Fri, Apr 30, 2021 at 3:13 PM Bin Meng <bmeng.cn@gmail.com> wrote:
>
> From: Bin Meng <bin.meng@windriver.com>
>
> Since commit 78da6a1bca22 ("device_tree: add qemu_fdt_setprop_string_array helper"),
> we can use the new helper to set the clock name for the ethernet
> controller node.
>
> Signed-off-by: Bin Meng <bin.meng@windriver.com>
> Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
> ---
>
> Changes in v2:
> - use "static const char * const" for ethclk_names
>
>  hw/riscv/sifive_u.c | 6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)
>

Looks like this series was not applied?

Regards,
Bin

Re: [PATCH v2 1/8] hw/riscv: sifive_u: Switch to use qemu_fdt_setprop_string_array() helper

[Alistair Francis]

On Mon, May 31, 2021 at 12:34 PM Bin Meng <bmeng.cn@gmail.com> wrote:
>
> On Fri, Apr 30, 2021 at 3:13 PM Bin Meng <bmeng.cn@gmail.com> wrote:
> >
> > From: Bin Meng <bin.meng@windriver.com>
> >
> > Since commit 78da6a1bca22 ("device_tree: add qemu_fdt_setprop_string_array helper"),
> > we can use the new helper to set the clock name for the ethernet
> > controller node.
> >
> > Signed-off-by: Bin Meng <bin.meng@windriver.com>
> > Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
> > ---
> >
> > Changes in v2:
> > - use "static const char * const" for ethclk_names
> >
> >  hw/riscv/sifive_u.c | 6 +++---
> >  1 file changed, 3 insertions(+), 3 deletions(-)
> >
>
> Looks like this series was not applied?

It's in my current tree. It just missed out on the last PR, it will be
in the next one. I was hoping that would be today, but I hit some
testing issues. Should be this week.

Alistair

>
> Regards,
> Bin
>