From: Gerd Hoffmann <kraxel@redhat.com>
To: qemu-devel@nongnu.org
Cc: Paolo Bonzini <pbonzini@redhat.com>,
Gerd Hoffmann <kraxel@redhat.com>,
"Michael S. Tsirkin" <mst@redhat.com>
Subject: [PULL 12/25] virtio-gpu: move virgl realize + properties
Date: Mon, 10 May 2021 15:20:38 +0200 [thread overview]
Message-ID: <20210510132051.2208563-13-kraxel@redhat.com> (raw)
In-Reply-To: <20210510132051.2208563-1-kraxel@redhat.com>
Move device init (realize) and properties.
Drop the virgl property, the virtio-gpu-gl-device has virgl enabled no
matter what. Just use virtio-gpu-device instead if you don't want
enable virgl and opengl. This simplifies the logic and reduces the test
matrix.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20210430113547.1816178-1-kraxel@redhat.com
Message-Id: <20210430113547.1816178-4-kraxel@redhat.com>
---
include/hw/virtio/virtio-gpu.h | 1 +
hw/display/virtio-gpu-gl.c | 33 +++++++++++++++++++++++++++++++++
hw/display/virtio-gpu.c | 23 +----------------------
3 files changed, 35 insertions(+), 22 deletions(-)
diff --git a/include/hw/virtio/virtio-gpu.h b/include/hw/virtio/virtio-gpu.h
index 5b2d011b49d5..7430f3cd9958 100644
--- a/include/hw/virtio/virtio-gpu.h
+++ b/include/hw/virtio/virtio-gpu.h
@@ -221,6 +221,7 @@ int virtio_gpu_create_mapping_iov(VirtIOGPU *g,
void virtio_gpu_cleanup_mapping_iov(VirtIOGPU *g,
struct iovec *iov, uint32_t count);
void virtio_gpu_process_cmdq(VirtIOGPU *g);
+void virtio_gpu_device_realize(DeviceState *qdev, Error **errp);
/* virtio-gpu-3d.c */
void virtio_gpu_virgl_process_cmd(VirtIOGPU *g,
diff --git a/hw/display/virtio-gpu-gl.c b/hw/display/virtio-gpu-gl.c
index a477cbe186d3..9b7b5f00d7e6 100644
--- a/hw/display/virtio-gpu-gl.c
+++ b/hw/display/virtio-gpu-gl.c
@@ -16,14 +16,47 @@
#include "qemu/module.h"
#include "qemu/error-report.h"
#include "qapi/error.h"
+#include "sysemu/sysemu.h"
#include "hw/virtio/virtio.h"
#include "hw/virtio/virtio-gpu.h"
#include "hw/virtio/virtio-gpu-bswap.h"
#include "hw/virtio/virtio-gpu-pixman.h"
#include "hw/qdev-properties.h"
+static void virtio_gpu_gl_device_realize(DeviceState *qdev, Error **errp)
+{
+ VirtIOGPU *g = VIRTIO_GPU(qdev);
+
+#if defined(HOST_WORDS_BIGENDIAN)
+ error_setg(errp, "virgl is not supported on bigendian platforms");
+ return;
+#endif
+
+ if (!display_opengl) {
+ error_setg(errp, "opengl is not available");
+ return;
+ }
+
+ g->parent_obj.conf.flags |= (1 << VIRTIO_GPU_FLAG_VIRGL_ENABLED);
+ VIRTIO_GPU_BASE(g)->virtio_config.num_capsets =
+ virtio_gpu_virgl_get_num_capsets(g);
+
+ virtio_gpu_device_realize(qdev, errp);
+}
+
+static Property virtio_gpu_gl_properties[] = {
+ DEFINE_PROP_BIT("stats", VirtIOGPU, parent_obj.conf.flags,
+ VIRTIO_GPU_FLAG_STATS_ENABLED, false),
+ DEFINE_PROP_END_OF_LIST(),
+};
+
static void virtio_gpu_gl_class_init(ObjectClass *klass, void *data)
{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+ VirtioDeviceClass *vdc = VIRTIO_DEVICE_CLASS(klass);
+
+ vdc->realize = virtio_gpu_gl_device_realize;
+ device_class_set_props(dc, virtio_gpu_gl_properties);
}
static const TypeInfo virtio_gpu_gl_info = {
diff --git a/hw/display/virtio-gpu.c b/hw/display/virtio-gpu.c
index 6f3791deb3ae..461b7769b457 100644
--- a/hw/display/virtio-gpu.c
+++ b/hw/display/virtio-gpu.c
@@ -1121,25 +1121,10 @@ static int virtio_gpu_load(QEMUFile *f, void *opaque, size_t size,
return 0;
}
-static void virtio_gpu_device_realize(DeviceState *qdev, Error **errp)
+void virtio_gpu_device_realize(DeviceState *qdev, Error **errp)
{
VirtIODevice *vdev = VIRTIO_DEVICE(qdev);
VirtIOGPU *g = VIRTIO_GPU(qdev);
- bool have_virgl;
-
-#if !defined(CONFIG_VIRGL) || defined(HOST_WORDS_BIGENDIAN)
- have_virgl = false;
-#else
- have_virgl = display_opengl;
-#endif
- if (!have_virgl) {
- g->parent_obj.conf.flags &= ~(1 << VIRTIO_GPU_FLAG_VIRGL_ENABLED);
- } else {
-#if defined(CONFIG_VIRGL)
- VIRTIO_GPU_BASE(g)->virtio_config.num_capsets =
- virtio_gpu_virgl_get_num_capsets(g);
-#endif
- }
if (!virtio_gpu_base_device_realize(qdev,
virtio_gpu_handle_ctrl_cb,
@@ -1251,12 +1236,6 @@ static Property virtio_gpu_properties[] = {
VIRTIO_GPU_BASE_PROPERTIES(VirtIOGPU, parent_obj.conf),
DEFINE_PROP_SIZE("max_hostmem", VirtIOGPU, conf_max_hostmem,
256 * MiB),
-#ifdef CONFIG_VIRGL
- DEFINE_PROP_BIT("virgl", VirtIOGPU, parent_obj.conf.flags,
- VIRTIO_GPU_FLAG_VIRGL_ENABLED, true),
- DEFINE_PROP_BIT("stats", VirtIOGPU, parent_obj.conf.flags,
- VIRTIO_GPU_FLAG_STATS_ENABLED, false),
-#endif
DEFINE_PROP_END_OF_LIST(),
};
--
2.31.1
next prev parent reply other threads:[~2021-05-10 13:25 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-10 13:20 [PULL 00/25] Vga 20210510 patches Gerd Hoffmann
2021-05-10 13:20 ` [PULL 01/25] qemu-edid: use qemu_edid_size() Gerd Hoffmann
2021-05-10 13:20 ` [PULL 02/25] edid: edid_desc_next Gerd Hoffmann
2021-05-10 13:20 ` [PULL 03/25] edid: move xtra3 descriptor Gerd Hoffmann
2021-05-10 13:20 ` [PULL 04/25] edid: use dta extension block descriptors Gerd Hoffmann
2021-05-10 13:20 ` [PULL 05/25] edid: Make refresh rate configurable Gerd Hoffmann
2021-05-10 13:20 ` [PULL 06/25] edid: move timing generation into a separate function Gerd Hoffmann
2021-05-10 13:20 ` [PULL 07/25] edid: allow arbitrary-length checksums Gerd Hoffmann
2021-05-10 13:20 ` [PULL 08/25] edid: add support for DisplayID extension (5k resolution) Gerd Hoffmann
2021-05-10 13:20 ` [PULL 09/25] virtio-gpu: handle partial maps properly Gerd Hoffmann
2021-05-10 13:20 ` [PULL 10/25] virtio-gpu: rename virgl source file Gerd Hoffmann
2021-05-10 13:20 ` [PULL 11/25] virtio-gpu: add virtio-gpu-gl-device Gerd Hoffmann
2021-05-10 13:20 ` Gerd Hoffmann [this message]
2021-05-21 9:32 ` [PULL 12/25] virtio-gpu: move virgl realize + properties Michal Prívozník
2021-05-21 10:50 ` Marc-André Lureau
2021-05-21 13:45 ` Gerd Hoffmann
2021-05-21 13:57 ` Gerd Hoffmann
2021-05-10 13:20 ` [PULL 13/25] virtio-gpu: move virgl reset Gerd Hoffmann
2021-05-10 13:20 ` [PULL 14/25] virtio-gpu: use class function for ctrl queue handlers Gerd Hoffmann
2021-05-10 13:20 ` [PULL 15/25] virtio-gpu: move virgl handle_ctrl Gerd Hoffmann
2021-05-10 13:20 ` [PULL 16/25] virtio-gpu: move virgl gl_flushed Gerd Hoffmann
2021-05-10 13:20 ` [PULL 17/25] virtio-gpu: move virgl process_cmd Gerd Hoffmann
2021-05-10 13:20 ` [PULL 18/25] virtio-gpu: move update_cursor_data Gerd Hoffmann
2021-05-10 13:20 ` [PULL 19/25] virtio-gpu: drop VIRGL() macro Gerd Hoffmann
2021-05-10 13:20 ` [PULL 20/25] virtio-gpu: move virtio-gpu-gl-device to separate module Gerd Hoffmann
2021-05-10 13:20 ` [PULL 21/25] virtio-gpu: drop use_virgl_renderer Gerd Hoffmann
2021-05-10 13:20 ` [PULL 22/25] virtio-gpu: move fields to struct VirtIOGPUGL Gerd Hoffmann
2021-05-10 13:20 ` [PULL 23/25] virtio-gpu: add virtio-gpu-gl-pci Gerd Hoffmann
2021-05-10 13:20 ` [PULL 24/25] modules: add have_vga Gerd Hoffmann
2021-05-10 13:20 ` [PULL 25/25] virtio-gpu: add virtio-vga-gl Gerd Hoffmann
2021-05-10 13:43 ` [PULL 00/25] Vga 20210510 patches no-reply
2021-05-12 15:05 ` Peter Maydell
2021-06-30 18:16 ` Marc-André Lureau
2021-07-01 6:29 ` Marc-André Lureau
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210510132051.2208563-13-kraxel@redhat.com \
--to=kraxel@redhat.com \
--cc=mst@redhat.com \
--cc=pbonzini@redhat.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).