From: Peter Maydell <peter.maydell@linaro.org>
To: qemu-arm@nongnu.org, qemu-devel@nongnu.org
Cc: Richard Henderson <richard.henderson@linaro.org>
Subject: [PATCH v2 23/57] target/arm: Implement MVE VAND, VBIC, VORR, VORN, VEOR
Date: Mon, 14 Jun 2021 16:09:33 +0100 [thread overview]
Message-ID: <20210614151007.4545-24-peter.maydell@linaro.org> (raw)
In-Reply-To: <20210614151007.4545-1-peter.maydell@linaro.org>
Implement the MVE vector logical operations operating
on two registers.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
---
target/arm/helper-mve.h | 6 ++++++
target/arm/mve.decode | 9 +++++++++
target/arm/mve_helper.c | 26 ++++++++++++++++++++++++++
target/arm/translate-mve.c | 37 +++++++++++++++++++++++++++++++++++++
4 files changed, 78 insertions(+)
diff --git a/target/arm/helper-mve.h b/target/arm/helper-mve.h
index 64c3f9e049e..01b6123f250 100644
--- a/target/arm/helper-mve.h
+++ b/target/arm/helper-mve.h
@@ -63,3 +63,9 @@ DEF_HELPER_FLAGS_3(mve_vnegh, TCG_CALL_NO_WG, void, env, ptr, ptr)
DEF_HELPER_FLAGS_3(mve_vnegw, TCG_CALL_NO_WG, void, env, ptr, ptr)
DEF_HELPER_FLAGS_3(mve_vfnegh, TCG_CALL_NO_WG, void, env, ptr, ptr)
DEF_HELPER_FLAGS_3(mve_vfnegs, TCG_CALL_NO_WG, void, env, ptr, ptr)
+
+DEF_HELPER_FLAGS_4(mve_vand, TCG_CALL_NO_WG, void, env, ptr, ptr, ptr)
+DEF_HELPER_FLAGS_4(mve_vbic, TCG_CALL_NO_WG, void, env, ptr, ptr, ptr)
+DEF_HELPER_FLAGS_4(mve_vorr, TCG_CALL_NO_WG, void, env, ptr, ptr, ptr)
+DEF_HELPER_FLAGS_4(mve_vorn, TCG_CALL_NO_WG, void, env, ptr, ptr, ptr)
+DEF_HELPER_FLAGS_4(mve_veor, TCG_CALL_NO_WG, void, env, ptr, ptr, ptr)
diff --git a/target/arm/mve.decode b/target/arm/mve.decode
index 09849917f5a..332e0b8d1d6 100644
--- a/target/arm/mve.decode
+++ b/target/arm/mve.decode
@@ -25,6 +25,7 @@
&vldr_vstr rn qd imm p a w size l u
&1op qd qm size
+&2op qd qm qn size
@vldr_vstr ....... . . . . l:1 rn:4 ... ...... imm:7 &vldr_vstr qd=%qd u=0
# Note that both Rn and Qd are 3 bits only (no D bit)
@@ -32,6 +33,7 @@
@1op .... .... .... size:2 .. .... .... .... .... &1op qd=%qd qm=%qm
@1op_nosz .... .... .... .... .... .... .... .... &1op qd=%qd qm=%qm size=0
+@2op_nosz .... .... .... .... .... .... .... .... &2op qd=%qd qm=%qm qn=%qn size=0
# Vector loads and stores
@@ -68,6 +70,13 @@ VLDR_VSTR 1110110 1 a:1 . w:1 . .... ... 111101 ....... @vldr_vstr \
VLDR_VSTR 1110110 1 a:1 . w:1 . .... ... 111110 ....... @vldr_vstr \
size=2 p=1
+# Vector 2-op
+VAND 1110 1111 0 . 00 ... 0 ... 0 0001 . 1 . 1 ... 0 @2op_nosz
+VBIC 1110 1111 0 . 01 ... 0 ... 0 0001 . 1 . 1 ... 0 @2op_nosz
+VORR 1110 1111 0 . 10 ... 0 ... 0 0001 . 1 . 1 ... 0 @2op_nosz
+VORN 1110 1111 0 . 11 ... 0 ... 0 0001 . 1 . 1 ... 0 @2op_nosz
+VEOR 1111 1111 0 . 00 ... 0 ... 0 0001 . 1 . 1 ... 0 @2op_nosz
+
# Vector miscellaneous
VCLS 1111 1111 1 . 11 .. 00 ... 0 0100 01 . 0 ... 0 @1op
diff --git a/target/arm/mve_helper.c b/target/arm/mve_helper.c
index f464ec19eaf..94064e68660 100644
--- a/target/arm/mve_helper.c
+++ b/target/arm/mve_helper.c
@@ -337,3 +337,29 @@ DO_1OP(vnegw, 4, int32_t, DO_NEG)
/* We can do these 64 bits at a time */
DO_1OP(vfnegh, 8, uint64_t, DO_FNEGH)
DO_1OP(vfnegs, 8, uint64_t, DO_FNEGS)
+
+#define DO_2OP(OP, ESIZE, TYPE, FN) \
+ void HELPER(glue(mve_, OP))(CPUARMState *env, \
+ void *vd, void *vn, void *vm) \
+ { \
+ TYPE *d = vd, *n = vn, *m = vm; \
+ uint16_t mask = mve_element_mask(env); \
+ unsigned e; \
+ for (e = 0; e < 16 / ESIZE; e++, mask >>= ESIZE) { \
+ mergemask(&d[H##ESIZE(e)], \
+ FN(n[H##ESIZE(e)], m[H##ESIZE(e)]), mask); \
+ } \
+ mve_advance_vpt(env); \
+ }
+
+#define DO_AND(N, M) ((N) & (M))
+#define DO_BIC(N, M) ((N) & ~(M))
+#define DO_ORR(N, M) ((N) | (M))
+#define DO_ORN(N, M) ((N) | ~(M))
+#define DO_EOR(N, M) ((N) ^ (M))
+
+DO_2OP(vand, 8, uint64_t, DO_AND)
+DO_2OP(vbic, 8, uint64_t, DO_BIC)
+DO_2OP(vorr, 8, uint64_t, DO_ORR)
+DO_2OP(vorn, 8, uint64_t, DO_ORN)
+DO_2OP(veor, 8, uint64_t, DO_EOR)
diff --git a/target/arm/translate-mve.c b/target/arm/translate-mve.c
index c5f5d49d11b..2c78dde42b3 100644
--- a/target/arm/translate-mve.c
+++ b/target/arm/translate-mve.c
@@ -30,6 +30,7 @@
typedef void MVEGenLdStFn(TCGv_ptr, TCGv_ptr, TCGv_i32);
typedef void MVEGenOneOpFn(TCGv_ptr, TCGv_ptr, TCGv_ptr);
+typedef void MVEGenTwoOpFn(TCGv_ptr, TCGv_ptr, TCGv_ptr, TCGv_ptr);
/* Return the offset of a Qn register (same semantics as aa32_vfp_qreg()) */
static inline long mve_qreg_offset(unsigned reg)
@@ -294,3 +295,39 @@ static bool trans_VNEG_fp(DisasContext *s, arg_1op *a)
}
return do_1op(s, a, fns[a->size]);
}
+
+static bool do_2op(DisasContext *s, arg_2op *a, MVEGenTwoOpFn fn)
+{
+ TCGv_ptr qd, qn, qm;
+
+ if (!dc_isar_feature(aa32_mve, s) ||
+ !mve_check_qreg_bank(s, a->qd | a->qn | a->qm) ||
+ !fn) {
+ return false;
+ }
+ if (!mve_eci_check(s) || !vfp_access_check(s)) {
+ return true;
+ }
+
+ qd = mve_qreg_ptr(a->qd);
+ qn = mve_qreg_ptr(a->qn);
+ qm = mve_qreg_ptr(a->qm);
+ fn(cpu_env, qd, qn, qm);
+ tcg_temp_free_ptr(qd);
+ tcg_temp_free_ptr(qn);
+ tcg_temp_free_ptr(qm);
+ mve_update_eci(s);
+ return true;
+}
+
+#define DO_LOGIC(INSN, HELPER) \
+ static bool trans_##INSN(DisasContext *s, arg_2op *a) \
+ { \
+ return do_2op(s, a, HELPER); \
+ }
+
+DO_LOGIC(VAND, gen_helper_mve_vand)
+DO_LOGIC(VBIC, gen_helper_mve_vbic)
+DO_LOGIC(VORR, gen_helper_mve_vorr)
+DO_LOGIC(VORN, gen_helper_mve_vorn)
+DO_LOGIC(VEOR, gen_helper_mve_veor)
--
2.20.1
next prev parent reply other threads:[~2021-06-14 15:33 UTC|newest]
Thread overview: 77+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-14 15:09 [PATCH v2 00/57] target/arm: First slice of MVE implementation Peter Maydell
2021-06-14 15:09 ` [PATCH v2 01/57] target/arm: Provide and use H8 and H1_8 macros Peter Maydell
2021-06-14 15:09 ` [PATCH v2 02/57] target/arm: Enable FPSCR.QC bit for MVE Peter Maydell
2021-06-14 15:09 ` [PATCH v2 03/57] target/arm: Handle VPR semantics in existing code Peter Maydell
2021-06-14 15:09 ` [PATCH v2 04/57] target/arm: Add handling for PSR.ECI/ICI Peter Maydell
2021-06-14 19:15 ` Richard Henderson
2021-06-14 15:09 ` [PATCH v2 05/57] target/arm: Let vfp_access_check() handle late NOCP checks Peter Maydell
2021-06-14 15:09 ` [PATCH v2 06/57] target/arm: Implement MVE LCTP Peter Maydell
2021-06-14 15:09 ` [PATCH v2 07/57] target/arm: Implement MVE WLSTP insn Peter Maydell
2021-06-14 19:20 ` Richard Henderson
2021-06-14 15:09 ` [PATCH v2 08/57] target/arm: Implement MVE DLSTP Peter Maydell
2021-06-14 15:09 ` [PATCH v2 09/57] target/arm: Implement MVE LETP insn Peter Maydell
2021-06-14 15:09 ` [PATCH v2 10/57] target/arm: Add framework for MVE decode Peter Maydell
2021-06-14 15:09 ` [PATCH v2 11/57] target/arm: Implement MVE VLDR/VSTR (non-widening forms) Peter Maydell
2021-06-14 19:29 ` Richard Henderson
2021-06-14 15:09 ` [PATCH v2 12/57] target/arm: Implement widening/narrowing MVE VLDR/VSTR insns Peter Maydell
2021-06-14 19:39 ` Richard Henderson
2021-06-14 15:09 ` [PATCH v2 13/57] target/arm: Move expand_pred_b() data to translate.c Peter Maydell
2021-06-14 19:41 ` Richard Henderson
2021-06-14 15:09 ` [PATCH v2 14/57] target/arm: Implement MVE VCLZ Peter Maydell
2021-06-14 20:00 ` Richard Henderson
2021-06-14 15:09 ` [PATCH v2 15/57] target/arm: Implement MVE VCLS Peter Maydell
2021-06-14 15:09 ` [PATCH v2 16/57] bitops.h: Provide hswap32(), hswap64(), wswap64() swapping operations Peter Maydell
2021-06-14 15:09 ` [PATCH v2 17/57] target/arm: Implement MVE VREV16, VREV32, VREV64 Peter Maydell
2021-06-14 20:03 ` Richard Henderson
2021-06-14 15:09 ` [PATCH v2 18/57] target/arm: Implement MVE VMVN (register) Peter Maydell
2021-06-14 15:09 ` [PATCH v2 19/57] target/arm: Implement MVE VABS Peter Maydell
2021-06-14 20:06 ` Richard Henderson
2021-06-14 15:09 ` [PATCH v2 20/57] target/arm: Implement MVE VNEG Peter Maydell
2021-06-14 15:09 ` [PATCH v2 21/57] tcg: Make gen_dup_i32() public Peter Maydell
2021-06-14 20:12 ` Richard Henderson
2021-06-14 15:09 ` [PATCH v2 22/57] target/arm: Implement MVE VDUP Peter Maydell
2021-06-14 20:15 ` Richard Henderson
2021-06-14 15:09 ` Peter Maydell [this message]
2021-06-14 15:09 ` [PATCH v2 24/57] target/arm: Implement MVE VADD, VSUB, VMUL Peter Maydell
2021-06-14 15:09 ` [PATCH v2 25/57] target/arm: Implement MVE VMULH Peter Maydell
2021-06-14 15:09 ` [PATCH v2 26/57] target/arm: Implement MVE VRMULH Peter Maydell
2021-06-14 15:09 ` [PATCH v2 27/57] target/arm: Implement MVE VMAX, VMIN Peter Maydell
2021-06-14 15:09 ` [PATCH v2 28/57] target/arm: Implement MVE VABD Peter Maydell
2021-06-14 15:09 ` [PATCH v2 29/57] target/arm: Implement MVE VHADD, VHSUB Peter Maydell
2021-06-14 15:09 ` [PATCH v2 30/57] target/arm: Implement MVE VMULL Peter Maydell
2021-06-14 15:09 ` [PATCH v2 31/57] target/arm: Implement MVE VMLALDAV Peter Maydell
2021-06-14 15:09 ` [PATCH v2 32/57] target/arm: Implement MVE VMLSLDAV Peter Maydell
2021-06-14 15:09 ` [PATCH v2 33/57] include/qemu/int128.h: Add function to create Int128 from int64_t Peter Maydell
2021-06-14 15:09 ` [PATCH v2 34/57] target/arm: Implement MVE VRMLALDAVH, VRMLSLDAVH Peter Maydell
2021-06-14 21:27 ` Richard Henderson
2021-06-14 15:09 ` [PATCH v2 35/57] target/arm: Implement MVE VADD (scalar) Peter Maydell
2021-06-14 21:30 ` Richard Henderson
2021-06-14 15:09 ` [PATCH v2 36/57] target/arm: Implement MVE VSUB, VMUL (scalar) Peter Maydell
2021-06-14 15:09 ` [PATCH v2 37/57] target/arm: Implement MVE VHADD, VHSUB (scalar) Peter Maydell
2021-06-14 15:09 ` [PATCH v2 38/57] target/arm: Implement MVE VBRSR Peter Maydell
2021-06-14 15:09 ` [PATCH v2 39/57] target/arm: Implement MVE VPST Peter Maydell
2021-06-14 15:09 ` [PATCH v2 40/57] target/arm: Implement MVE VQADD and VQSUB Peter Maydell
2021-06-14 15:09 ` [PATCH v2 41/57] target/arm: Implement MVE VQDMULH and VQRDMULH (scalar) Peter Maydell
2021-06-14 15:09 ` [PATCH v2 42/57] target/arm: Implement MVE VQDMULL scalar Peter Maydell
2021-06-14 15:09 ` [PATCH v2 43/57] target/arm: Implement MVE VQDMULH, VQRDMULH (vector) Peter Maydell
2021-06-14 15:09 ` [PATCH v2 44/57] target/arm: Implement MVE VQADD, VQSUB (vector) Peter Maydell
2021-06-14 15:09 ` [PATCH v2 45/57] target/arm: Implement MVE VQSHL (vector) Peter Maydell
2021-06-14 21:43 ` Richard Henderson
2021-06-14 15:09 ` [PATCH v2 46/57] target/arm: Implement MVE VQRSHL Peter Maydell
2021-06-14 15:09 ` [PATCH v2 47/57] target/arm: Implement MVE VSHL insn Peter Maydell
2021-06-14 15:09 ` [PATCH v2 48/57] target/arm: Implmement MVE VRSHL Peter Maydell
2021-06-14 15:09 ` [PATCH v2 49/57] target/arm: Implement MVE VQDMLADH and VQRDMLADH Peter Maydell
2021-06-14 15:10 ` [PATCH v2 50/57] target/arm: Implement MVE VQDMLSDH and VQRDMLSDH Peter Maydell
2021-06-14 15:10 ` [PATCH v2 51/57] target/arm: Implement MVE VQDMULL (vector) Peter Maydell
2021-06-14 15:10 ` [PATCH v2 52/57] target/arm: Implement MVE VRHADD Peter Maydell
2021-06-14 15:10 ` [PATCH v2 53/57] target/arm: Implement MVE VADC, VSBC Peter Maydell
2021-06-14 21:58 ` Richard Henderson
2021-06-14 15:10 ` [PATCH v2 54/57] target/arm: Implement MVE VCADD Peter Maydell
2021-06-14 15:10 ` [PATCH v2 55/57] target/arm: Implement MVE VHCADD Peter Maydell
2021-06-14 22:01 ` Richard Henderson
2021-06-14 15:10 ` [PATCH v2 56/57] target/arm: Implement MVE VADDV Peter Maydell
2021-06-14 15:10 ` [PATCH v2 57/57] target/arm: Make VMOV scalar <-> gpreg beatwise for MVE Peter Maydell
2021-06-14 22:20 ` [PATCH v2 00/57] target/arm: First slice of MVE implementation no-reply
2021-06-14 22:22 ` Richard Henderson
2021-06-21 16:37 ` Peter Maydell
2021-06-21 17:13 ` Richard Henderson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210614151007.4545-24-peter.maydell@linaro.org \
--to=peter.maydell@linaro.org \
--cc=qemu-arm@nongnu.org \
--cc=qemu-devel@nongnu.org \
--cc=richard.henderson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).