[Qemu-devel] [PATCH v4 02/16] register: Add Register API

[Alistair Francis <alistair.francis@xilinx.com>]

This API provides some encapsulation of registers and factors our some
common functionality to common code. Bits of device state (usually MMIO
registers), often have all sorts of access restrictions and semantics
associated with them. This API allow you to define what those
restrictions are on a bit-by-bit basis.

Helper functions are then used to access the register which observe the
semantics defined by the RegisterAccessInfo struct.

Some features:
Bits can be marked as read_only (ro field)
Bits can be marked as write-1-clear (w1c field)
Bits can be marked as reserved (rsvd field)
Reset values can be defined (reset)
Bits can throw guest errors when written certain values (ge0, ge1)
Bits can throw unimp errors when written certain values (ui0, ui1)
Bits can be marked clear on read (cor)
Pre and post action callbacks can be added to read and write ops
Verbose debugging info can be enabled/disabled

Useful for defining device register spaces in a data driven way. Cuts
down on a lot of the verbosity and repetition in the switch-case blocks
in the standard foo_mmio_read/write functions.

Also useful for automated generation of device models from hardware
design sources.

Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
---
V4:
 - Rebase
 - Remove the guest error masking
 - Simplify the unimplemented masking
 - Use the reserved value in the write calculations
 - Remove read_lite and write_lite
 - General fixes to asserts and log printing
V3:
 - Address some comments from Fred

 hw/core/Makefile.objs |   1 +
 hw/core/register.c    | 152 ++++++++++++++++++++++++++++++++++++++++++++++++++
 include/hw/register.h | 111 ++++++++++++++++++++++++++++++++++++
 3 files changed, 264 insertions(+)
 create mode 100644 hw/core/register.c
 create mode 100644 include/hw/register.h

diff --git a/hw/core/Makefile.objs b/hw/core/Makefile.objs
index abb3560..bf95db5 100644
--- a/hw/core/Makefile.objs
+++ b/hw/core/Makefile.objs
@@ -14,4 +14,5 @@ common-obj-$(CONFIG_SOFTMMU) += machine.o
 common-obj-$(CONFIG_SOFTMMU) += null-machine.o
 common-obj-$(CONFIG_SOFTMMU) += loader.o
 common-obj-$(CONFIG_SOFTMMU) += qdev-properties-system.o
+common-obj-$(CONFIG_SOFTMMU) += register.o
 common-obj-$(CONFIG_PLATFORM_BUS) += platform-bus.o
diff --git a/hw/core/register.c b/hw/core/register.c
new file mode 100644
index 0000000..7e47df5
--- /dev/null
+++ b/hw/core/register.c
@@ -0,0 +1,152 @@
+/*
+ * Register Definition API
+ *
+ * Copyright (c) 2013 Xilinx Inc.
+ * Copyright (c) 2013 Peter Crosthwaite <peter.crosthwaite@xilinx.com>
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2.  See
+ * the COPYING file in the top-level directory.
+ */
+
+#include "hw/register.h"
+#include "hw/qdev.h"
+#include "qemu/log.h"
+
+static inline void register_write_log(int mask, RegisterInfo *reg, int dir,
+                                      uint64_t val, const char *msg,
+                                      const char *reason)
+{
+    qemu_log_mask(mask, "%s:%s bits %#" PRIx64 " %s write of %d%s%s\n",
+                  reg->prefix, reg->access->name, val, msg, dir,
+                  reason ? ": " : "", reason ? reason : "");
+}
+
+static inline void register_write_val(RegisterInfo *reg, uint64_t val)
+{
+    g_assert(reg->data);
+
+    switch (reg->data_size) {
+    case 1:
+        *(uint8_t *)reg->data = val;
+        break;
+    case 2:
+        *(uint16_t *)reg->data = val;
+        break;
+    case 4:
+        *(uint32_t *)reg->data = val;
+        break;
+    case 8:
+        *(uint64_t *)reg->data = val;
+        break;
+    default:
+        g_assert_not_reached();
+    }
+}
+
+static inline uint64_t register_read_val(RegisterInfo *reg)
+{
+    switch (reg->data_size) {
+    case 1:
+        return *(uint8_t *)reg->data;
+    case 2:
+        return *(uint16_t *)reg->data;
+    case 4:
+        return *(uint32_t *)reg->data;
+    case 8:
+        return *(uint64_t *)reg->data;
+    default:
+        g_assert_not_reached();
+    }
+    return 0; /* unreachable */
+}
+
+void register_write(RegisterInfo *reg, uint64_t val, uint64_t we)
+{
+    uint64_t old_val, new_val, test, no_w_mask;
+    const RegisterAccessInfo *ac;
+
+    assert(reg);
+
+    ac = reg->access;
+
+    if (!ac || !ac->name) {
+        qemu_log_mask(LOG_GUEST_ERROR, "%s: write to undefined device state "
+                      "(written value: %#" PRIx64 ")\n", reg->prefix, val);
+        return;
+    }
+
+    old_val = reg->data ? register_read_val(reg) : ac->reset;
+
+    test = (old_val ^ val) & ac->rsvd;
+    if (test) {
+        qemu_log_mask(LOG_GUEST_ERROR, "%s: change of value in reserved bit"
+                      "fields: %#" PRIx64 ")\n", reg->prefix, test);
+    }
+
+    test = val & ac->unimp;
+    if (test) {
+        qemu_log_mask(LOG_UNIMP,
+                      "%s:%s writing %#" PRIx64 " to unimplemented bits:" \
+                      " %#" PRIx64 "",
+                      reg->prefix, reg->access->name, val, ac->unimp);
+    }
+
+
+    no_w_mask = ac->ro | ac->w1c | ac->rsvd | ~we;
+    new_val = (val & ~no_w_mask) | (old_val & no_w_mask);
+    new_val &= ~(val & ac->w1c);
+
+    if (ac->pre_write) {
+        new_val = ac->pre_write(reg, new_val);
+    }
+
+    if (reg->debug) {
+        qemu_log("%s:%s: write of value %#" PRIx64 "\n", reg->prefix, ac->name,
+                 new_val);
+    }
+
+    register_write_val(reg, new_val);
+
+    if (ac->post_write) {
+        ac->post_write(reg, new_val);
+    }
+}
+
+uint64_t register_read(RegisterInfo *reg)
+{
+    uint64_t ret;
+    const RegisterAccessInfo *ac;
+
+    assert(reg);
+
+    ac = reg->access;
+    if (!ac || !ac->name) {
+        qemu_log_mask(LOG_GUEST_ERROR, "%s: read from undefined device state\n",
+                      reg->prefix);
+        return 0;
+    }
+
+    ret = reg->data ? register_read_val(reg) : ac->reset;
+
+    register_write_val(reg, ret & ~ac->cor);
+
+    if (ac->post_read) {
+        ret = ac->post_read(reg, ret);
+    }
+
+    if (reg->debug) {
+        qemu_log("%s:%s: read of value %#" PRIx64 "\n", reg->prefix,
+                 ac->name, ret);
+    }
+
+    return ret;
+}
+
+void register_reset(RegisterInfo *reg)
+{
+    g_assert(reg);
+    g_assert(reg->data);
+    g_assert(reg->access);
+
+    register_write_val(reg, reg->access->reset);
+}
diff --git a/include/hw/register.h b/include/hw/register.h
new file mode 100644
index 0000000..444239c
--- /dev/null
+++ b/include/hw/register.h
@@ -0,0 +1,111 @@
+/*
+ * Register Definition API
+ *
+ * Copyright (c) 2013 Xilinx Inc.
+ * Copyright (c) 2013 Peter Crosthwaite <peter.crosthwaite@xilinx.com>
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2.  See
+ * the COPYING file in the top-level directory.
+ */
+
+#ifndef REGISTER_H
+#define REGISTER_H
+
+#include "exec/memory.h"
+
+typedef struct RegisterInfo RegisterInfo;
+typedef struct RegisterAccessInfo RegisterAccessInfo;
+
+/**
+ * Access description for a register that is part of guest accessible device
+ * state.
+ *
+ * @name: String name of the register
+ * @ro: whether or not the bit is read-only
+ * @w1c: bits with the common write 1 to clear semantic.
+ * @reset: reset value.
+ * @cor: Bits that are clear on read
+ * @rsvd: Bits that are reserved and should not be changed
+ *
+ * @ui1: Bits that when written 1 indicate use of an unimplemented feature
+ * @ui0: Bits that when written 0 indicate use of an unimplemented feature
+ *
+ * @pre_write: Pre write callback. Passed the value that's to be written,
+ * immediately before the actual write. The returned value is what is written,
+ * giving the handler a chance to modify the written value.
+ * @post_write: Post write callback. Passed the written value. Most write side
+ * effects should be implemented here.
+ *
+ * @post_read: Post read callback. Passes the value that is about to be returned
+ * for a read. The return value from this function is what is ultimately read,
+ * allowing this function to modify the value before return to the client.
+ */
+
+struct RegisterAccessInfo {
+    const char *name;
+    uint64_t ro;
+    uint64_t w1c;
+    uint64_t reset;
+    uint64_t cor;
+    uint64_t rsvd;
+    uint64_t unimp;
+
+    uint64_t (*pre_write)(RegisterInfo *reg, uint64_t val);
+    void (*post_write)(RegisterInfo *reg, uint64_t val);
+
+    uint64_t (*post_read)(RegisterInfo *reg, uint64_t val);
+};
+
+/**
+ * A register that is part of guest accessible state
+ * @data: pointer to the register data. Will be cast
+ * to the relevant uint type depending on data_size.
+ * @data_size: Size of the register in bytes. Must be
+ * 1, 2, 4 or 8
+ *
+ * @access: Access description of this register
+ *
+ * @debug: Whether or not verbose debug is enabled
+ * @prefix: String prefix for log and debug messages
+ *
+ * @opaque: Opaque data for the register
+ */
+
+struct RegisterInfo {
+    /* <public> */
+    void *data;
+    int data_size;
+
+    const RegisterAccessInfo *access;
+
+    bool debug;
+    const char *prefix;
+
+    void *opaque;
+};
+
+/**
+ * write a value to a register, subject to its restrictions
+ * @reg: register to write to
+ * @val: value to write
+ * @we: write enable mask
+ */
+
+void register_write(RegisterInfo *reg, uint64_t val, uint64_t we);
+
+/**
+ * read a value from a register, subject to its restrictions
+ * @reg: register to read from
+ * returns: value read
+ */
+
+uint64_t register_read(RegisterInfo *reg);
+
+/**
+ * reset a register
+ * @reg: register to reset
+ */
+
+void register_reset(RegisterInfo *reg);
+
+#endif
-- 
2.5.0