From: John Snow <jsnow@redhat.com>
To: Maxim Levitsky <mlevitsk@redhat.com>, qemu-devel@nongnu.org
Cc: Fam Zheng <fam@euphon.net>, Kevin Wolf <kwolf@redhat.com>,
qemu-block@nongnu.org, Max Reitz <mreitz@redhat.com>,
Keith Busch <kbusch@kernel.org>,
Paolo Bonzini <pbonzini@redhat.com>
Subject: Re: [Qemu-devel] [PATCH v2 2/2] block/nvme: add support for discard
Date: Wed, 18 Sep 2019 16:24:01 -0400 [thread overview]
Message-ID: <43af6ea3-9b08-d605-ea58-26f8023cc9ee@redhat.com> (raw)
In-Reply-To: <20190913133627.28450-3-mlevitsk@redhat.com>
On 9/13/19 9:36 AM, Maxim Levitsky wrote:
> Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Same comments as 1/2; but not worth holding anything up. We'll find out
from users if there are problems, but I wish we had a nicer way to test it.
Reviewed-by: John Snow <jsnow@redhat.com>
> ---
> block/nvme.c | 83 ++++++++++++++++++++++++++++++++++++++++++++++
> block/trace-events | 2 ++
> 2 files changed, 85 insertions(+)
>
> diff --git a/block/nvme.c b/block/nvme.c
> index d95265fae4..c17edd6aae 100644
> --- a/block/nvme.c
> +++ b/block/nvme.c
> @@ -112,6 +112,7 @@ typedef struct {
> bool plugged;
>
> bool supports_write_zeroes;
> + bool supports_discard;
>
> CoMutex dma_map_lock;
> CoQueue dma_flush_queue;
> @@ -463,6 +464,7 @@ static void nvme_identify(BlockDriverState *bs, int namespace, Error **errp)
>
> oncs = le16_to_cpu(idctrl->oncs);
> s->supports_write_zeroes = !!(oncs & NVME_ONCS_WRITE_ZEROS);
> + s->supports_discard = !!(oncs & NVME_ONCS_DSM);
>
> memset(resp, 0, 4096);
>
> @@ -1153,6 +1155,86 @@ static coroutine_fn int nvme_co_pwrite_zeroes(BlockDriverState *bs,
> }
>
>
> +static int coroutine_fn nvme_co_pdiscard(BlockDriverState *bs,
> + int64_t offset,
> + int bytes)
> +{
> + BDRVNVMeState *s = bs->opaque;
> + NVMeQueuePair *ioq = s->queues[1];
> + NVMeRequest *req;
> + NvmeDsmRange *buf;
> + QEMUIOVector local_qiov;
> + int ret;
> +
> + NvmeCmd cmd = {
> + .opcode = NVME_CMD_DSM,
> + .nsid = cpu_to_le32(s->nsid),
> + .cdw10 = cpu_to_le32(0), /*number of ranges - 0 based*/
> + .cdw11 = cpu_to_le32(1 << 2), /*deallocate bit*/
> + };
> +
> + NVMeCoData data = {
> + .ctx = bdrv_get_aio_context(bs),
> + .ret = -EINPROGRESS,
> + };
> +
> + if (!s->supports_discard) {
> + return -ENOTSUP;
> + }
> +
> + assert(s->nr_queues > 1);
> +
> + buf = qemu_try_blockalign0(bs, s->page_size);
> + if (!buf) {
> + return -ENOMEM;
> + }
> +
> + buf->nlb = cpu_to_le32(bytes >> s->blkshift);
> + buf->slba = cpu_to_le64(offset >> s->blkshift);
> + buf->cattr = 0;
> +
> + qemu_iovec_init(&local_qiov, 1);
> + qemu_iovec_add(&local_qiov, buf, 4096);
> +
> + req = nvme_get_free_req(ioq);
> + assert(req);
> +
> + qemu_co_mutex_lock(&s->dma_map_lock);
> + ret = nvme_cmd_map_qiov(bs, &cmd, req, &local_qiov);
> + qemu_co_mutex_unlock(&s->dma_map_lock);
> +
> + if (ret) {
> + req->busy = false;
> + goto out;
> + }
> +
> + trace_nvme_dsm(s, offset, bytes);
> +
> + nvme_submit_command(s, ioq, req, &cmd, nvme_rw_cb, &data);
> +
> + data.co = qemu_coroutine_self();
> + while (data.ret == -EINPROGRESS) {
> + qemu_coroutine_yield();
> + }
> +
> + qemu_co_mutex_lock(&s->dma_map_lock);
> + ret = nvme_cmd_unmap_qiov(bs, &local_qiov);
> + qemu_co_mutex_unlock(&s->dma_map_lock);
> +
> + if (ret) {
> + goto out;
> + }
> +
> + ret = data.ret;
> + trace_nvme_dsm_done(s, offset, bytes, ret);
> +out:
> + qemu_iovec_destroy(&local_qiov);
> + qemu_vfree(buf);
> + return ret;
> +
> +}
> +
> +
> static int nvme_reopen_prepare(BDRVReopenState *reopen_state,
> BlockReopenQueue *queue, Error **errp)
> {
> @@ -1259,6 +1341,7 @@ static BlockDriver bdrv_nvme = {
> .bdrv_co_pwritev = nvme_co_pwritev,
>
> .bdrv_co_pwrite_zeroes = nvme_co_pwrite_zeroes,
> + .bdrv_co_pdiscard = nvme_co_pdiscard,
>
> .bdrv_co_flush_to_disk = nvme_co_flush,
> .bdrv_reopen_prepare = nvme_reopen_prepare,
> diff --git a/block/trace-events b/block/trace-events
> index 651aa461d5..c61553b4b8 100644
> --- a/block/trace-events
> +++ b/block/trace-events
> @@ -153,6 +153,8 @@ nvme_write_zeroes(void *s, uint64_t offset, uint64_t bytes, int flags) "s %p off
> nvme_qiov_unaligned(const void *qiov, int n, void *base, size_t size, int align) "qiov %p n %d base %p size 0x%zx align 0x%x"
> nvme_prw_buffered(void *s, uint64_t offset, uint64_t bytes, int niov, int is_write) "s %p offset %"PRId64" bytes %"PRId64" niov %d is_write %d"
> nvme_rw_done(void *s, int is_write, uint64_t offset, uint64_t bytes, int ret) "s %p is_write %d offset %"PRId64" bytes %"PRId64" ret %d"
> +nvme_dsm(void *s, uint64_t offset, uint64_t bytes) "s %p offset %"PRId64" bytes %"PRId64""
> +nvme_dsm_done(void *s, uint64_t offset, uint64_t bytes, int ret) "s %p offset %"PRId64" bytes %"PRId64" ret %d"
> nvme_dma_map_flush(void *s) "s %p"
> nvme_free_req_queue_wait(void *q) "q %p"
> nvme_cmd_map_qiov(void *s, void *cmd, void *req, void *qiov, int entries) "s %p cmd %p req %p qiov %p entries %d"
>
--
—js
next prev parent reply other threads:[~2019-09-18 20:25 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-13 13:36 [Qemu-devel] [PATCH v2 0/2] block/nvme: add support for write zeros and discard Maxim Levitsky
2019-09-13 13:36 ` [Qemu-devel] [PATCH v2 1/2] block/nvme: add support for write zeros Maxim Levitsky
2019-09-18 20:22 ` John Snow
2019-09-13 13:36 ` [Qemu-devel] [PATCH v2 2/2] block/nvme: add support for discard Maxim Levitsky
2019-09-18 20:24 ` John Snow [this message]
2019-10-28 10:35 ` [PATCH v2 0/2] block/nvme: add support for write zeros and discard Max Reitz
2019-10-29 13:33 ` John Snow
2019-11-04 17:54 ` Maxim Levitsky
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=43af6ea3-9b08-d605-ea58-26f8023cc9ee@redhat.com \
--to=jsnow@redhat.com \
--cc=fam@euphon.net \
--cc=kbusch@kernel.org \
--cc=kwolf@redhat.com \
--cc=mlevitsk@redhat.com \
--cc=mreitz@redhat.com \
--cc=pbonzini@redhat.com \
--cc=qemu-block@nongnu.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).