From: "Cédric Le Goater" <clg@kaod.org>
To: Guenter Roeck <linux@roeck-us.net>,
Alistair Francis <alistair@alistair23.me>,
Kevin Wolf <kwolf@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>,
qemu-block@nongnu.org, Andrew Jeffery <andrew@aj.id.au>,
qemu-devel@nongnu.org, Max Reitz <mreitz@redhat.com>,
qemu-arm@nongnu.org, Joel Stanley <joel@jms.id.au>
Subject: Re: [PATCH v2 1/4] m25p80: Convert to support tracing
Date: Mon, 17 Feb 2020 16:47:52 +0100 [thread overview]
Message-ID: <488b3355-4467-e01e-d6a0-a2d5bc959428@kaod.org> (raw)
In-Reply-To: <20200206183219.3756-1-linux@roeck-us.net>
Hello all,
On 2/6/20 7:32 PM, Guenter Roeck wrote:
> While at it, add some trace messages to help debug problems
> seen when running the latest Linux kernel.
Through which tree do you think it is best to merge this patchset ?
block or arm ?
Thanks,
C.
> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
> ---
> v2: Print pointer to Flash data structure as flash ID with each trace
> message to support systems with more than one instantiated flash.
>
> hw/block/m25p80.c | 48 ++++++++++++++++++++-----------------------
> hw/block/trace-events | 16 +++++++++++++++
> 2 files changed, 38 insertions(+), 26 deletions(-)
>
> diff --git a/hw/block/m25p80.c b/hw/block/m25p80.c
> index 61f2fb8f8f..5ff8d270c4 100644
> --- a/hw/block/m25p80.c
> +++ b/hw/block/m25p80.c
> @@ -32,17 +32,7 @@
> #include "qemu/module.h"
> #include "qemu/error-report.h"
> #include "qapi/error.h"
> -
> -#ifndef M25P80_ERR_DEBUG
> -#define M25P80_ERR_DEBUG 0
> -#endif
> -
> -#define DB_PRINT_L(level, ...) do { \
> - if (M25P80_ERR_DEBUG > (level)) { \
> - fprintf(stderr, ": %s: ", __func__); \
> - fprintf(stderr, ## __VA_ARGS__); \
> - } \
> -} while (0)
> +#include "trace.h"
>
> /* Fields for FlashPartInfo->flags */
>
> @@ -574,7 +564,8 @@ static void flash_erase(Flash *s, int offset, FlashCMD cmd)
> abort();
> }
>
> - DB_PRINT_L(0, "offset = %#x, len = %d\n", offset, len);
> + trace_m25p80_flash_erase(s, offset, len);
> +
> if ((s->pi->flags & capa_to_assert) != capa_to_assert) {
> qemu_log_mask(LOG_GUEST_ERROR, "M25P80: %d erase size not supported by"
> " device\n", len);
> @@ -607,8 +598,7 @@ void flash_write8(Flash *s, uint32_t addr, uint8_t data)
> }
>
> if ((prev ^ data) & data) {
> - DB_PRINT_L(1, "programming zero to one! addr=%" PRIx32 " %" PRIx8
> - " -> %" PRIx8 "\n", addr, prev, data);
> + trace_m25p80_programming_zero_to_one(s, addr, prev, data);
> }
>
> if (s->pi->flags & EEPROM) {
> @@ -662,6 +652,9 @@ static void complete_collecting_data(Flash *s)
>
> s->state = STATE_IDLE;
>
> + trace_m25p80_complete_collecting(s, s->cmd_in_progress, n, s->ear,
> + s->cur_addr);
> +
> switch (s->cmd_in_progress) {
> case DPP:
> case QPP:
> @@ -825,7 +818,7 @@ static void reset_memory(Flash *s)
> break;
> }
>
> - DB_PRINT_L(0, "Reset done.\n");
> + trace_m25p80_reset_done(s);
> }
>
> static void decode_fast_read_cmd(Flash *s)
> @@ -941,9 +934,10 @@ static void decode_qio_read_cmd(Flash *s)
>
> static void decode_new_cmd(Flash *s, uint32_t value)
> {
> - s->cmd_in_progress = value;
> int i;
> - DB_PRINT_L(0, "decoded new command:%x\n", value);
> +
> + s->cmd_in_progress = value;
> + trace_m25p80_command_decoded(s, value);
>
> if (value != RESET_MEMORY) {
> s->reset_enable = false;
> @@ -1042,7 +1036,7 @@ static void decode_new_cmd(Flash *s, uint32_t value)
> break;
>
> case JEDEC_READ:
> - DB_PRINT_L(0, "populated jedec code\n");
> + trace_m25p80_populated_jedec(s);
> for (i = 0; i < s->pi->id_len; i++) {
> s->data[i] = s->pi->id[i];
> }
> @@ -1063,7 +1057,7 @@ static void decode_new_cmd(Flash *s, uint32_t value)
> case BULK_ERASE_60:
> case BULK_ERASE:
> if (s->write_enable) {
> - DB_PRINT_L(0, "chip erase\n");
> + trace_m25p80_chip_erase(s);
> flash_erase(s, 0, BULK_ERASE);
> } else {
> qemu_log_mask(LOG_GUEST_ERROR, "M25P80: chip erase with write "
> @@ -1184,7 +1178,7 @@ static int m25p80_cs(SSISlave *ss, bool select)
> s->data_read_loop = false;
> }
>
> - DB_PRINT_L(0, "%sselect\n", select ? "de" : "");
> + trace_m25p80_select(s, select ? "de" : "");
>
> return 0;
> }
> @@ -1194,19 +1188,20 @@ static uint32_t m25p80_transfer8(SSISlave *ss, uint32_t tx)
> Flash *s = M25P80(ss);
> uint32_t r = 0;
>
> + trace_m25p80_transfer(s, s->state, s->len, s->needed_bytes, s->pos,
> + s->cur_addr, (uint8_t)tx);
> +
> switch (s->state) {
>
> case STATE_PAGE_PROGRAM:
> - DB_PRINT_L(1, "page program cur_addr=%#" PRIx32 " data=%" PRIx8 "\n",
> - s->cur_addr, (uint8_t)tx);
> + trace_m25p80_page_program(s, s->cur_addr, (uint8_t)tx);
> flash_write8(s, s->cur_addr, (uint8_t)tx);
> s->cur_addr = (s->cur_addr + 1) & (s->size - 1);
> break;
>
> case STATE_READ:
> r = s->storage[s->cur_addr];
> - DB_PRINT_L(1, "READ 0x%" PRIx32 "=%" PRIx8 "\n", s->cur_addr,
> - (uint8_t)r);
> + trace_m25p80_read_byte(s, s->cur_addr, (uint8_t)r);
> s->cur_addr = (s->cur_addr + 1) & (s->size - 1);
> break;
>
> @@ -1244,6 +1239,7 @@ static uint32_t m25p80_transfer8(SSISlave *ss, uint32_t tx)
> }
>
> r = s->data[s->pos];
> + trace_m25p80_read_data(s, s->pos, (uint8_t)r);
> s->pos++;
> if (s->pos == s->len) {
> s->pos = 0;
> @@ -1281,7 +1277,7 @@ static void m25p80_realize(SSISlave *ss, Error **errp)
> return;
> }
>
> - DB_PRINT_L(0, "Binding to IF_MTD drive\n");
> + trace_m25p80_binding(s);
> s->storage = blk_blockalign(s->blk, s->size);
>
> if (blk_pread(s->blk, 0, s->storage, s->size) != s->size) {
> @@ -1289,7 +1285,7 @@ static void m25p80_realize(SSISlave *ss, Error **errp)
> return;
> }
> } else {
> - DB_PRINT_L(0, "No BDRV - binding to RAM\n");
> + trace_m25p80_binding_no_bdrv(s);
> s->storage = blk_blockalign(NULL, s->size);
> memset(s->storage, 0xFF, s->size);
> }
> diff --git a/hw/block/trace-events b/hw/block/trace-events
> index c03e80c2c9..f78939fa9d 100644
> --- a/hw/block/trace-events
> +++ b/hw/block/trace-events
> @@ -134,3 +134,19 @@ xen_block_blockdev_add(char *str) "%s"
> xen_block_blockdev_del(const char *node_name) "%s"
> xen_block_device_create(unsigned int number) "%u"
> xen_block_device_destroy(unsigned int number) "%u"
> +
> +# m25p80.c
> +m25p80_flash_erase(void *s, int offset, uint32_t len) "[%p] offset = 0x%"PRIx32", len = %u"
> +m25p80_programming_zero_to_one(void *s, uint32_t addr, uint8_t prev, uint8_t data) "[%p] programming zero to one! addr=0x%"PRIx32" 0x%"PRIx8" -> 0x%"PRIx8
> +m25p80_reset_done(void *s) "[%p] Reset done."
> +m25p80_command_decoded(void *s, uint32_t cmd) "[%p] new command:0x%"PRIx32
> +m25p80_complete_collecting(void *s, uint32_t cmd, int n, uint8_t ear, uint32_t cur_addr) "[%p] decode cmd: 0x%"PRIx32" len %d ear 0x%"PRIx8" addr 0x%"PRIx32
> +m25p80_populated_jedec(void *s) "[%p] populated jedec code"
> +m25p80_chip_erase(void *s) "[%p] chip erase"
> +m25p80_select(void *s, const char *what) "[%p] %sselect"
> +m25p80_page_program(void *s, uint32_t addr, uint8_t tx) "[%p] page program cur_addr=0x%"PRIx32" data=0x%"PRIx8
> +m25p80_transfer(void *s, uint8_t state, uint32_t len, uint8_t needed, uint32_t pos, uint32_t cur_addr, uint8_t t) "[%p] Transfer state 0x%"PRIx8" len 0x%"PRIx32" needed 0x%"PRIx8" pos 0x%"PRIx32" addr 0x%"PRIx32" tx 0x%"PRIx8
> +m25p80_read_byte(void *s, uint32_t addr, uint8_t v) "[%p] Read byte 0x%"PRIx32"=0x%"PRIx8
> +m25p80_read_data(void *s, uint32_t pos, uint8_t v) "[%p] Read data 0x%"PRIx32"=0x%"PRIx8
> +m25p80_binding(void *s) "[%p] Binding to IF_MTD drive"
> +m25p80_binding_no_bdrv(void *s) "[%p] No BDRV - binding to RAM"
>
next prev parent reply other threads:[~2020-02-17 15:49 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-06 18:32 [PATCH v2 1/4] m25p80: Convert to support tracing Guenter Roeck
2020-02-06 18:32 ` [PATCH v2 2/4] m25p80: Improve command handling for Jedec commands Guenter Roeck
2020-02-06 18:36 ` Philippe Mathieu-Daudé
2020-02-06 22:26 ` Alistair Francis
2020-02-07 7:22 ` Cédric Le Goater
2020-07-21 17:36 ` Cédric Le Goater
2020-07-21 19:57 ` Guenter Roeck
2020-07-22 8:02 ` Cédric Le Goater
2020-07-22 10:19 ` Philippe Mathieu-Daudé
2020-02-06 18:32 ` [PATCH v2 3/4] m25p80: Improve command handling for unsupported commands Guenter Roeck
2020-02-07 0:21 ` Philippe Mathieu-Daudé
2020-02-07 7:22 ` Cédric Le Goater
2020-02-06 18:32 ` [PATCH v2 4/4] aspeed/smc: Fix number of dummy cycles for FAST_READ_4 command Guenter Roeck
2020-02-06 18:39 ` Philippe Mathieu-Daudé
2020-02-06 18:40 ` [PATCH v2 1/4] m25p80: Convert to support tracing Philippe Mathieu-Daudé
2020-02-06 22:19 ` Alistair Francis
2020-02-07 7:22 ` Cédric Le Goater
2020-02-17 15:47 ` Cédric Le Goater [this message]
2020-03-16 14:13 ` Cédric Le Goater
2020-03-16 14:58 ` Peter Maydell
2020-03-16 15:11 ` Cédric Le Goater
2020-03-16 15:29 ` Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=488b3355-4467-e01e-d6a0-a2d5bc959428@kaod.org \
--to=clg@kaod.org \
--cc=alistair@alistair23.me \
--cc=andrew@aj.id.au \
--cc=joel@jms.id.au \
--cc=kwolf@redhat.com \
--cc=linux@roeck-us.net \
--cc=mreitz@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-arm@nongnu.org \
--cc=qemu-block@nongnu.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).