QEMU-Devel Archive on lore.kernel.org
 help / color / Atom feed
From: Alberto Garcia <berto@igalia.com>
To: qemu-devel@nongnu.org
Cc: Kevin Wolf <kwolf@redhat.com>,
	Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>,
	Alberto Garcia <berto@igalia.com>,
	qemu-block@nongnu.org, Derek Su <dereksu@qnap.com>,
	Max Reitz <mreitz@redhat.com>
Subject: [PATCH v9 05/34] qcow2: Process QCOW2_CLUSTER_ZERO_ALLOC clusters in handle_copied()
Date: Sun, 28 Jun 2020 13:02:14 +0200
Message-ID: <4b6d5c3a4359b3e5274df5ac22262b2b4198fb99.1593342067.git.berto@igalia.com> (raw)
In-Reply-To: <cover.1593342067.git.berto@igalia.com>

When writing to a qcow2 file there are two functions that take a
virtual offset and return a host offset, possibly allocating new
clusters if necessary:

   - handle_copied() looks for normal data clusters that are already
     allocated and have a reference count of 1. In those clusters we
     can simply write the data and there is no need to perform any
     copy-on-write.

   - handle_alloc() looks for clusters that do need copy-on-write,
     either because they haven't been allocated yet, because their
     reference count is != 1 or because they are ZERO_ALLOC clusters.

The ZERO_ALLOC case is a bit special because those are clusters that
are already allocated and they could perfectly be dealt with in
handle_copied() (as long as copy-on-write is performed when required).

In fact, there is extra code specifically for them in handle_alloc()
that tries to reuse the existing allocation if possible and frees them
otherwise.

This patch changes the handling of ZERO_ALLOC clusters so the
semantics of these two functions are now like this:

   - handle_copied() looks for clusters that are already allocated and
     which we can overwrite (NORMAL and ZERO_ALLOC clusters with a
     reference count of 1).

   - handle_alloc() looks for clusters for which we need a new
     allocation (all other cases).

One important difference after this change is that clusters found
in handle_copied() may now require copy-on-write, but this will be
necessary anyway once we add support for subclusters.

Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
---
 block/qcow2-cluster.c | 256 +++++++++++++++++++++++-------------------
 1 file changed, 141 insertions(+), 115 deletions(-)

diff --git a/block/qcow2-cluster.c b/block/qcow2-cluster.c
index 80f9787461..fce0be7a08 100644
--- a/block/qcow2-cluster.c
+++ b/block/qcow2-cluster.c
@@ -1039,13 +1039,18 @@ void qcow2_alloc_cluster_abort(BlockDriverState *bs, QCowL2Meta *m)
 
 /*
  * For a given write request, create a new QCowL2Meta structure, add
- * it to @m and the BDRVQcow2State.cluster_allocs list.
+ * it to @m and the BDRVQcow2State.cluster_allocs list. If the write
+ * request does not need copy-on-write or changes to the L2 metadata
+ * then this function does nothing.
  *
  * @host_cluster_offset points to the beginning of the first cluster.
  *
  * @guest_offset and @bytes indicate the offset and length of the
  * request.
  *
+ * @l2_slice contains the L2 entries of all clusters involved in this
+ * write request.
+ *
  * If @keep_old is true it means that the clusters were already
  * allocated and will be overwritten. If false then the clusters are
  * new and we have to decrease the reference count of the old ones.
@@ -1053,15 +1058,53 @@ void qcow2_alloc_cluster_abort(BlockDriverState *bs, QCowL2Meta *m)
 static void calculate_l2_meta(BlockDriverState *bs,
                               uint64_t host_cluster_offset,
                               uint64_t guest_offset, unsigned bytes,
-                              QCowL2Meta **m, bool keep_old)
+                              uint64_t *l2_slice, QCowL2Meta **m, bool keep_old)
 {
     BDRVQcow2State *s = bs->opaque;
-    unsigned cow_start_from = 0;
+    int l2_index = offset_to_l2_slice_index(s, guest_offset);
+    uint64_t l2_entry;
+    unsigned cow_start_from, cow_end_to;
     unsigned cow_start_to = offset_into_cluster(s, guest_offset);
     unsigned cow_end_from = cow_start_to + bytes;
-    unsigned cow_end_to = ROUND_UP(cow_end_from, s->cluster_size);
     unsigned nb_clusters = size_to_clusters(s, cow_end_from);
     QCowL2Meta *old_m = *m;
+    QCow2ClusterType type;
+
+    assert(nb_clusters <= s->l2_slice_size - l2_index);
+
+    /* Return if there's no COW (all clusters are normal and we keep them) */
+    if (keep_old) {
+        int i;
+        for (i = 0; i < nb_clusters; i++) {
+            l2_entry = be64_to_cpu(l2_slice[l2_index + i]);
+            if (qcow2_get_cluster_type(bs, l2_entry) != QCOW2_CLUSTER_NORMAL) {
+                break;
+            }
+        }
+        if (i == nb_clusters) {
+            return;
+        }
+    }
+
+    /* Get the L2 entry of the first cluster */
+    l2_entry = be64_to_cpu(l2_slice[l2_index]);
+    type = qcow2_get_cluster_type(bs, l2_entry);
+
+    if (type == QCOW2_CLUSTER_NORMAL && keep_old) {
+        cow_start_from = cow_start_to;
+    } else {
+        cow_start_from = 0;
+    }
+
+    /* Get the L2 entry of the last cluster */
+    l2_entry = be64_to_cpu(l2_slice[l2_index + nb_clusters - 1]);
+    type = qcow2_get_cluster_type(bs, l2_entry);
+
+    if (type == QCOW2_CLUSTER_NORMAL && keep_old) {
+        cow_end_to = cow_end_from;
+    } else {
+        cow_end_to = ROUND_UP(cow_end_from, s->cluster_size);
+    }
 
     *m = g_malloc0(sizeof(**m));
     **m = (QCowL2Meta) {
@@ -1087,18 +1130,22 @@ static void calculate_l2_meta(BlockDriverState *bs,
     QLIST_INSERT_HEAD(&s->cluster_allocs, *m, next_in_flight);
 }
 
-/* Returns true if writing to a cluster requires COW */
-static bool cluster_needs_cow(BlockDriverState *bs, uint64_t l2_entry)
+/*
+ * Returns true if writing to the cluster pointed to by @l2_entry
+ * requires a new allocation (that is, if the cluster is unallocated
+ * or has refcount > 1 and therefore cannot be written in-place).
+ */
+static bool cluster_needs_new_alloc(BlockDriverState *bs, uint64_t l2_entry)
 {
     switch (qcow2_get_cluster_type(bs, l2_entry)) {
     case QCOW2_CLUSTER_NORMAL:
+    case QCOW2_CLUSTER_ZERO_ALLOC:
         if (l2_entry & QCOW_OFLAG_COPIED) {
             return false;
         }
     case QCOW2_CLUSTER_UNALLOCATED:
     case QCOW2_CLUSTER_COMPRESSED:
     case QCOW2_CLUSTER_ZERO_PLAIN:
-    case QCOW2_CLUSTER_ZERO_ALLOC:
         return true;
     default:
         abort();
@@ -1106,20 +1153,38 @@ static bool cluster_needs_cow(BlockDriverState *bs, uint64_t l2_entry)
 }
 
 /*
- * Returns the number of contiguous clusters that can be used for an allocating
- * write, but require COW to be performed (this includes yet unallocated space,
- * which must copy from the backing file)
+ * Returns the number of contiguous clusters that can be written to
+ * using one single write request, starting from @l2_index.
+ * At most @nb_clusters are checked.
+ *
+ * If @new_alloc is true this counts clusters that are either
+ * unallocated, or allocated but with refcount > 1 (so they need to be
+ * newly allocated and COWed).
+ *
+ * If @new_alloc is false this counts clusters that are already
+ * allocated and can be overwritten in-place (this includes clusters
+ * of type QCOW2_CLUSTER_ZERO_ALLOC).
  */
-static int count_cow_clusters(BlockDriverState *bs, int nb_clusters,
-    uint64_t *l2_slice, int l2_index)
+static int count_single_write_clusters(BlockDriverState *bs, int nb_clusters,
+                                       uint64_t *l2_slice, int l2_index,
+                                       bool new_alloc)
 {
+    BDRVQcow2State *s = bs->opaque;
+    uint64_t l2_entry = be64_to_cpu(l2_slice[l2_index]);
+    uint64_t expected_offset = l2_entry & L2E_OFFSET_MASK;
     int i;
 
     for (i = 0; i < nb_clusters; i++) {
-        uint64_t l2_entry = be64_to_cpu(l2_slice[l2_index + i]);
-        if (!cluster_needs_cow(bs, l2_entry)) {
+        l2_entry = be64_to_cpu(l2_slice[l2_index + i]);
+        if (cluster_needs_new_alloc(bs, l2_entry) != new_alloc) {
             break;
         }
+        if (!new_alloc) {
+            if (expected_offset != (l2_entry & L2E_OFFSET_MASK)) {
+                break;
+            }
+            expected_offset += s->cluster_size;
+        }
     }
 
     assert(i <= nb_clusters);
@@ -1190,10 +1255,10 @@ static int handle_dependencies(BlockDriverState *bs, uint64_t guest_offset,
 }
 
 /*
- * Checks how many already allocated clusters that don't require a copy on
- * write there are at the given guest_offset (up to *bytes). If *host_offset is
- * not INV_OFFSET, only physically contiguous clusters beginning at this host
- * offset are counted.
+ * Checks how many already allocated clusters that don't require a new
+ * allocation there are at the given guest_offset (up to *bytes).
+ * If *host_offset is not INV_OFFSET, only physically contiguous clusters
+ * beginning at this host offset are counted.
  *
  * Note that guest_offset may not be cluster aligned. In this case, the
  * returned *host_offset points to exact byte referenced by guest_offset and
@@ -1202,12 +1267,12 @@ static int handle_dependencies(BlockDriverState *bs, uint64_t guest_offset,
  * Returns:
  *   0:     if no allocated clusters are available at the given offset.
  *          *bytes is normally unchanged. It is set to 0 if the cluster
- *          is allocated and doesn't need COW, but doesn't have the right
- *          physical offset.
+ *          is allocated and can be overwritten in-place but doesn't have
+ *          the right physical offset.
  *
- *   1:     if allocated clusters that don't require a COW are available at
- *          the requested offset. *bytes may have decreased and describes
- *          the length of the area that can be written to.
+ *   1:     if allocated clusters that can be overwritten in place are
+ *          available at the requested offset. *bytes may have decreased
+ *          and describes the length of the area that can be written to.
  *
  *  -errno: in error cases
  */
@@ -1216,7 +1281,7 @@ static int handle_copied(BlockDriverState *bs, uint64_t guest_offset,
 {
     BDRVQcow2State *s = bs->opaque;
     int l2_index;
-    uint64_t cluster_offset;
+    uint64_t l2_entry, cluster_offset;
     uint64_t *l2_slice;
     uint64_t nb_clusters;
     unsigned int keep_clusters;
@@ -1237,7 +1302,8 @@ static int handle_copied(BlockDriverState *bs, uint64_t guest_offset,
 
     l2_index = offset_to_l2_slice_index(s, guest_offset);
     nb_clusters = MIN(nb_clusters, s->l2_slice_size - l2_index);
-    assert(nb_clusters <= INT_MAX);
+    /* Limit total byte count to BDRV_REQUEST_MAX_BYTES */
+    nb_clusters = MIN(nb_clusters, BDRV_REQUEST_MAX_BYTES >> s->cluster_bits);
 
     /* Find L2 entry for the first involved cluster */
     ret = get_cluster_table(bs, guest_offset, &l2_slice, &l2_index);
@@ -1245,41 +1311,39 @@ static int handle_copied(BlockDriverState *bs, uint64_t guest_offset,
         return ret;
     }
 
-    cluster_offset = be64_to_cpu(l2_slice[l2_index]);
+    l2_entry = be64_to_cpu(l2_slice[l2_index]);
+    cluster_offset = l2_entry & L2E_OFFSET_MASK;
+
+    if (!cluster_needs_new_alloc(bs, l2_entry)) {
+        if (offset_into_cluster(s, cluster_offset)) {
+            qcow2_signal_corruption(bs, true, -1, -1, "%s cluster offset "
+                                    "%#" PRIx64 " unaligned (guest offset: %#"
+                                    PRIx64 ")", l2_entry & QCOW_OFLAG_ZERO ?
+                                    "Preallocated zero" : "Data",
+                                    cluster_offset, guest_offset);
+            ret = -EIO;
+            goto out;
+        }
 
-    /* Check how many clusters are already allocated and don't need COW */
-    if (qcow2_get_cluster_type(bs, cluster_offset) == QCOW2_CLUSTER_NORMAL
-        && (cluster_offset & QCOW_OFLAG_COPIED))
-    {
         /* If a specific host_offset is required, check it */
-        bool offset_matches =
-            (cluster_offset & L2E_OFFSET_MASK) == *host_offset;
-
-        if (offset_into_cluster(s, cluster_offset & L2E_OFFSET_MASK)) {
-            qcow2_signal_corruption(bs, true, -1, -1, "Data cluster offset "
-                                    "%#llx unaligned (guest offset: %#" PRIx64
-                                    ")", cluster_offset & L2E_OFFSET_MASK,
-                                    guest_offset);
-            ret = -EIO;
-            goto out;
-        }
-
-        if (*host_offset != INV_OFFSET && !offset_matches) {
+        if (*host_offset != INV_OFFSET && cluster_offset != *host_offset) {
             *bytes = 0;
             ret = 0;
             goto out;
         }
 
         /* We keep all QCOW_OFLAG_COPIED clusters */
-        keep_clusters =
-            count_contiguous_clusters(bs, nb_clusters, s->cluster_size,
-                                      &l2_slice[l2_index],
-                                      QCOW_OFLAG_COPIED | QCOW_OFLAG_ZERO);
+        keep_clusters = count_single_write_clusters(bs, nb_clusters, l2_slice,
+                                                    l2_index, false);
         assert(keep_clusters <= nb_clusters);
 
         *bytes = MIN(*bytes,
                  keep_clusters * s->cluster_size
                  - offset_into_cluster(s, guest_offset));
+        assert(*bytes != 0);
+
+        calculate_l2_meta(bs, cluster_offset, guest_offset,
+                          *bytes, l2_slice, m, true);
 
         ret = 1;
     } else {
@@ -1293,8 +1357,7 @@ out:
     /* Only return a host offset if we actually made progress. Otherwise we
      * would make requirements for handle_alloc() that it can't fulfill */
     if (ret > 0) {
-        *host_offset = (cluster_offset & L2E_OFFSET_MASK)
-                     + offset_into_cluster(s, guest_offset);
+        *host_offset = cluster_offset + offset_into_cluster(s, guest_offset);
     }
 
     return ret;
@@ -1355,9 +1418,10 @@ static int do_alloc_cluster_offset(BlockDriverState *bs, uint64_t guest_offset,
 }
 
 /*
- * Allocates new clusters for an area that either is yet unallocated or needs a
- * copy on write. If *host_offset is not INV_OFFSET, clusters are only
- * allocated if the new allocation can match the specified host offset.
+ * Allocates new clusters for an area that is either still unallocated or
+ * cannot be overwritten in-place. If *host_offset is not INV_OFFSET,
+ * clusters are only allocated if the new allocation can match the specified
+ * host offset.
  *
  * Note that guest_offset may not be cluster aligned. In this case, the
  * returned *host_offset points to exact byte referenced by guest_offset and
@@ -1380,12 +1444,10 @@ static int handle_alloc(BlockDriverState *bs, uint64_t guest_offset,
     BDRVQcow2State *s = bs->opaque;
     int l2_index;
     uint64_t *l2_slice;
-    uint64_t entry;
     uint64_t nb_clusters;
     int ret;
-    bool keep_old_clusters = false;
 
-    uint64_t alloc_cluster_offset = INV_OFFSET;
+    uint64_t alloc_cluster_offset;
 
     trace_qcow2_handle_alloc(qemu_coroutine_self(), guest_offset, *host_offset,
                              *bytes);
@@ -1400,10 +1462,8 @@ static int handle_alloc(BlockDriverState *bs, uint64_t guest_offset,
 
     l2_index = offset_to_l2_slice_index(s, guest_offset);
     nb_clusters = MIN(nb_clusters, s->l2_slice_size - l2_index);
-    assert(nb_clusters <= INT_MAX);
-
-    /* Limit total allocation byte count to INT_MAX */
-    nb_clusters = MIN(nb_clusters, INT_MAX >> s->cluster_bits);
+    /* Limit total allocation byte count to BDRV_REQUEST_MAX_BYTES */
+    nb_clusters = MIN(nb_clusters, BDRV_REQUEST_MAX_BYTES >> s->cluster_bits);
 
     /* Find L2 entry for the first involved cluster */
     ret = get_cluster_table(bs, guest_offset, &l2_slice, &l2_index);
@@ -1411,67 +1471,32 @@ static int handle_alloc(BlockDriverState *bs, uint64_t guest_offset,
         return ret;
     }
 
-    entry = be64_to_cpu(l2_slice[l2_index]);
-    nb_clusters = count_cow_clusters(bs, nb_clusters, l2_slice, l2_index);
+    nb_clusters = count_single_write_clusters(bs, nb_clusters,
+                                              l2_slice, l2_index, true);
 
     /* This function is only called when there were no non-COW clusters, so if
      * we can't find any unallocated or COW clusters either, something is
      * wrong with our code. */
     assert(nb_clusters > 0);
 
-    if (qcow2_get_cluster_type(bs, entry) == QCOW2_CLUSTER_ZERO_ALLOC &&
-        (entry & QCOW_OFLAG_COPIED) &&
-        (*host_offset == INV_OFFSET ||
-         start_of_cluster(s, *host_offset) == (entry & L2E_OFFSET_MASK)))
-    {
-        int preallocated_nb_clusters;
-
-        if (offset_into_cluster(s, entry & L2E_OFFSET_MASK)) {
-            qcow2_signal_corruption(bs, true, -1, -1, "Preallocated zero "
-                                    "cluster offset %#llx unaligned (guest "
-                                    "offset: %#" PRIx64 ")",
-                                    entry & L2E_OFFSET_MASK, guest_offset);
-            ret = -EIO;
-            goto fail;
-        }
-
-        /* Try to reuse preallocated zero clusters; contiguous normal clusters
-         * would be fine, too, but count_cow_clusters() above has limited
-         * nb_clusters already to a range of COW clusters */
-        preallocated_nb_clusters =
-            count_contiguous_clusters(bs, nb_clusters, s->cluster_size,
-                                      &l2_slice[l2_index], QCOW_OFLAG_COPIED);
-        assert(preallocated_nb_clusters > 0);
-
-        nb_clusters = preallocated_nb_clusters;
-        alloc_cluster_offset = entry & L2E_OFFSET_MASK;
-
-        /* We want to reuse these clusters, so qcow2_alloc_cluster_link_l2()
-         * should not free them. */
-        keep_old_clusters = true;
+    /* Allocate at a given offset in the image file */
+    alloc_cluster_offset = *host_offset == INV_OFFSET ? INV_OFFSET :
+        start_of_cluster(s, *host_offset);
+    ret = do_alloc_cluster_offset(bs, guest_offset, &alloc_cluster_offset,
+                                  &nb_clusters);
+    if (ret < 0) {
+        goto out;
     }
 
-    qcow2_cache_put(s->l2_table_cache, (void **) &l2_slice);
-
-    if (alloc_cluster_offset == INV_OFFSET) {
-        /* Allocate, if necessary at a given offset in the image file */
-        alloc_cluster_offset = *host_offset == INV_OFFSET ? INV_OFFSET :
-                               start_of_cluster(s, *host_offset);
-        ret = do_alloc_cluster_offset(bs, guest_offset, &alloc_cluster_offset,
-                                      &nb_clusters);
-        if (ret < 0) {
-            goto fail;
-        }
-
-        /* Can't extend contiguous allocation */
-        if (nb_clusters == 0) {
-            *bytes = 0;
-            return 0;
-        }
-
-        assert(alloc_cluster_offset != INV_OFFSET);
+    /* Can't extend contiguous allocation */
+    if (nb_clusters == 0) {
+        *bytes = 0;
+        ret = 0;
+        goto out;
     }
 
+    assert(alloc_cluster_offset != INV_OFFSET);
+
     /*
      * Save info needed for meta data update.
      *
@@ -1494,13 +1519,14 @@ static int handle_alloc(BlockDriverState *bs, uint64_t guest_offset,
     *bytes = MIN(*bytes, nb_bytes - offset_into_cluster(s, guest_offset));
     assert(*bytes != 0);
 
-    calculate_l2_meta(bs, alloc_cluster_offset, guest_offset, *bytes,
-                      m, keep_old_clusters);
+    calculate_l2_meta(bs, alloc_cluster_offset, guest_offset, *bytes, l2_slice,
+                      m, false);
 
-    return 1;
+    ret = 1;
 
-fail:
-    if (*m && (*m)->nb_clusters > 0) {
+out:
+    qcow2_cache_put(s->l2_table_cache, (void **) &l2_slice);
+    if (ret < 0 && *m && (*m)->nb_clusters > 0) {
         QLIST_REMOVE(*m, next_in_flight);
     }
     return ret;
-- 
2.20.1



  parent reply index

Thread overview: 71+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-06-28 11:02 [PATCH v9 00/34] Add subcluster allocation to qcow2 Alberto Garcia
2020-06-28 11:02 ` [PATCH v9 01/34] qcow2: Make Qcow2AioTask store the full host offset Alberto Garcia
2020-06-28 11:02 ` [PATCH v9 02/34] qcow2: Convert qcow2_get_cluster_offset() into qcow2_get_host_offset() Alberto Garcia
2020-06-30 10:19   ` Max Reitz
2020-06-30 10:27     ` Alberto Garcia
2020-06-28 11:02 ` [PATCH v9 03/34] qcow2: Add calculate_l2_meta() Alberto Garcia
2020-06-28 11:02 ` [PATCH v9 04/34] qcow2: Split cluster_needs_cow() out of count_cow_clusters() Alberto Garcia
2020-06-28 11:02 ` Alberto Garcia [this message]
2020-06-30 10:38   ` [PATCH v9 05/34] qcow2: Process QCOW2_CLUSTER_ZERO_ALLOC clusters in handle_copied() Max Reitz
2020-06-28 11:02 ` [PATCH v9 06/34] qcow2: Add get_l2_entry() and set_l2_entry() Alberto Garcia
2020-06-28 11:02 ` [PATCH v9 07/34] qcow2: Document the Extended L2 Entries feature Alberto Garcia
2020-06-28 11:02 ` [PATCH v9 08/34] qcow2: Add dummy has_subclusters() function Alberto Garcia
2020-06-28 11:02 ` [PATCH v9 09/34] qcow2: Add subcluster-related fields to BDRVQcow2State Alberto Garcia
2020-06-28 11:02 ` [PATCH v9 10/34] qcow2: Add offset_to_sc_index() Alberto Garcia
2020-06-28 11:02 ` [PATCH v9 11/34] qcow2: Add offset_into_subcluster() and size_to_subclusters() Alberto Garcia
2020-07-01 12:23   ` Max Reitz
2020-06-28 11:02 ` [PATCH v9 12/34] qcow2: Add l2_entry_size() Alberto Garcia
2020-06-28 11:02 ` [PATCH v9 13/34] qcow2: Update get/set_l2_entry() and add get/set_l2_bitmap() Alberto Garcia
2020-07-01 12:28   ` Max Reitz
2020-06-28 11:02 ` [PATCH v9 14/34] qcow2: Add QCow2SubclusterType and qcow2_get_subcluster_type() Alberto Garcia
2020-07-01 12:52   ` Max Reitz
2020-07-01 16:26     ` Alberto Garcia
2020-07-02  9:57       ` Max Reitz
2020-07-02 22:00         ` Alberto Garcia
2020-07-03  7:17           ` Max Reitz
2020-06-28 11:02 ` [PATCH v9 15/34] qcow2: Add qcow2_get_subcluster_range_type() Alberto Garcia
2020-07-01 13:37   ` Max Reitz
2020-06-28 11:02 ` [PATCH v9 16/34] qcow2: Add qcow2_cluster_is_allocated() Alberto Garcia
2020-07-01 13:55   ` Max Reitz
2020-06-28 11:02 ` [PATCH v9 17/34] qcow2: Add cluster type parameter to qcow2_get_host_offset() Alberto Garcia
2020-06-28 11:02 ` [PATCH v9 18/34] qcow2: Replace QCOW2_CLUSTER_* with QCOW2_SUBCLUSTER_* Alberto Garcia
2020-06-28 11:02 ` [PATCH v9 19/34] qcow2: Handle QCOW2_SUBCLUSTER_UNALLOCATED_ALLOC Alberto Garcia
2020-06-28 11:02 ` [PATCH v9 20/34] qcow2: Add subcluster support to calculate_l2_meta() Alberto Garcia
2020-07-02 11:30   ` Max Reitz
2020-06-28 11:02 ` [PATCH v9 21/34] qcow2: Add subcluster support to qcow2_get_host_offset() Alberto Garcia
2020-07-02 12:46   ` Max Reitz
2020-07-02 22:04     ` Alberto Garcia
2020-06-28 11:02 ` [PATCH v9 22/34] qcow2: Add subcluster support to zero_in_l2_slice() Alberto Garcia
2020-07-02 12:56   ` Max Reitz
2020-06-28 11:02 ` [PATCH v9 23/34] qcow2: Add subcluster support to discard_in_l2_slice() Alberto Garcia
2020-07-02 13:24   ` Max Reitz
2020-06-28 11:02 ` [PATCH v9 24/34] qcow2: Add subcluster support to check_refcounts_l2() Alberto Garcia
2020-07-02 13:32   ` Max Reitz
2020-06-28 11:02 ` [PATCH v9 25/34] qcow2: Update L2 bitmap in qcow2_alloc_cluster_link_l2() Alberto Garcia
2020-07-02 14:01   ` Max Reitz
2020-06-28 11:02 ` [PATCH v9 26/34] qcow2: Clear the L2 bitmap when allocating a compressed cluster Alberto Garcia
2020-06-28 11:02 ` [PATCH v9 27/34] qcow2: Add subcluster support to handle_alloc_space() Alberto Garcia
2020-06-28 11:02 ` [PATCH v9 28/34] qcow2: Add subcluster support to qcow2_co_pwrite_zeroes() Alberto Garcia
2020-07-02 14:28   ` Max Reitz
2020-07-02 22:40     ` Alberto Garcia
2020-07-03  7:18       ` Max Reitz
2020-06-28 11:02 ` [PATCH v9 29/34] qcow2: Add subcluster support to qcow2_measure() Alberto Garcia
2020-06-28 11:02 ` [PATCH v9 30/34] qcow2: Add prealloc field to QCowL2Meta Alberto Garcia
2020-07-02 14:50   ` Max Reitz
2020-07-02 14:58     ` Eric Blake
2020-07-02 15:09       ` Max Reitz
2020-07-02 23:05         ` Alberto Garcia
2020-07-03  7:22           ` Max Reitz
2020-06-28 11:02 ` [PATCH v9 31/34] qcow2: Add the 'extended_l2' option and the QCOW2_INCOMPAT_EXTL2 bit Alberto Garcia
2020-07-02 15:13   ` Max Reitz
2020-07-03 12:43     ` Alberto Garcia
2020-06-28 11:02 ` [PATCH v9 32/34] qcow2: Allow preallocation and backing files if extended_l2 is set Alberto Garcia
2020-07-03  7:45   ` Max Reitz
2020-06-28 11:02 ` [PATCH v9 33/34] qcow2: Assert that expand_zero_clusters_in_l1() does not support subclusters Alberto Garcia
2020-07-03  7:46   ` Max Reitz
2020-06-28 11:02 ` [PATCH v9 34/34] iotests: Add tests for qcow2 images with extended L2 entries Alberto Garcia
2020-07-03  9:49   ` Max Reitz
2020-07-03 13:06     ` Alberto Garcia
2020-07-03 13:47       ` Max Reitz
2020-07-03 15:20         ` Alberto Garcia
2020-07-06 13:57       ` Eric Blake

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4b6d5c3a4359b3e5274df5ac22262b2b4198fb99.1593342067.git.berto@igalia.com \
    --to=berto@igalia.com \
    --cc=dereksu@qnap.com \
    --cc=kwolf@redhat.com \
    --cc=mreitz@redhat.com \
    --cc=qemu-block@nongnu.org \
    --cc=qemu-devel@nongnu.org \
    --cc=vsementsov@virtuozzo.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

QEMU-Devel Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/qemu-devel/0 qemu-devel/git/0.git
	git clone --mirror https://lore.kernel.org/qemu-devel/1 qemu-devel/git/1.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 qemu-devel qemu-devel/ https://lore.kernel.org/qemu-devel \
		qemu-devel@nongnu.org
	public-inbox-index qemu-devel

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.nongnu.qemu-devel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git