From: Jean-Christophe DUBOIS <jcd@tribudubois.net>
To: Peter Maydell <peter.maydell@linaro.org>
Cc: QEMU Developers <qemu-devel@nongnu.org>,
Peter Crosthwaite <crosthwaite.peter@gmail.com>
Subject: Re: [Qemu-devel] [PATCH v2 7/9] i.MX: Add i.MX6 SOC implementation.
Date: Sat, 20 Feb 2016 11:55:26 +0100 [thread overview]
Message-ID: <56C8461E.4050809@tribudubois.net> (raw)
In-Reply-To: <56C783D8.9040409@tribudubois.net>
[-- Attachment #1: Type: text/plain, Size: 16952 bytes --]
Just to compare I tried to run Linux on QEMU emulating highbank.
For now I am unable to start in SMP mode. Only one core is activated.
And there is linux backtrace in L2C-310 init.
My command line:
# qemu-system-arm -smp 4 -M highbank -m 1024M -display none -no-reboot
-kernel zImage -initrd rootfs.cpio.gz -dtb highbank.dtb -serial stdio
The kernel output:
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.5.0-rc1-00028-g03c21cb-dirty
(jcd@jcd-U31SG) (gcc version 4.6.3 (GCC) ) #20 SMP Sat Feb 20
11:27:10 CET 2016
[ 0.000000] CPU: ARMv7 Processor [410fc090] revision 0 (ARMv7),
cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT
nonaliasing instruction cache
[ 0.000000] Machine model: Calxeda Highbank
[ 0.000000] cma: Reserved 64 MiB at 0x3c000000
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] DT missing boot CPU MPIDR[23:0], fall back to default
cpu_logical_map
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: Using PSCI v0.1 Function IDs from DT
[ 0.000000] PERCPU: Embedded 12 pages/cpu @ef7e3000 s18880 r8192
d22080 u49152
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping
on. Total pages: 260608
[ 0.000000] Kernel command line: console=ttyAMA0
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7,
524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6,
262144 bytes)
[ 0.000000] Memory: 958304K/1048576K available (8557K kernel
code, 1112K rwdata, 4036K rodata, 1104K init, 345K bss, 24736K
reserved, 65536K cma-reserved, 196608K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0208000 - 0xc0e554cc (12598 kB)
[ 0.000000] .init : 0xc0e56000 - 0xc0f6a000 (1104 kB)
[ 0.000000] .data : 0xc0f6a000 - 0xc10803c0 (1113 kB)
[ 0.000000] .bss : 0xc1083000 - 0xc10d9598 ( 346 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1,
Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 32.
[ 0.000000] RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=1.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32,
nr_cpu_ids=1
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] L2C-310 erratum 769419 enabled
[ 0.000000] L2C-310 enabling early BRESP for Cortex-A9
[ 0.000000] ------------[ cut here ]------------
[ 0.000000] WARNING: CPU: 0 PID: 0 at
arch/arm/mach-highbank/highbank.c:60
highbank_l2c310_write_sec+0x34/0x58()
[ 0.000000] Highbank L2C310: ignoring write to reg 0x104
[ 0.000000] Modules linked in:
[ 0.000000] CPU: 0 PID: 0 Comm: swapper/0 Not tainted
4.5.0-rc1-00028-g03c21cb-dirty #20
[ 0.000000] Hardware name: Highbank
[ 0.000000] [<c02187b4>] (unwind_backtrace) from [<c0213e20>]
(show_stack+0x10/0x14)
[ 0.000000] [<c0213e20>] (show_stack) from [<c048f9a4>]
(dump_stack+0x70/0x8c)
[ 0.000000] [<c048f9a4>] (dump_stack) from [<c024ab30>]
(warn_slowpath_common+0x74/0xac)
[ 0.000000] [<c024ab30>] (warn_slowpath_common) from [<c024abfc>]
(warn_slowpath_fmt+0x30/0x40)
[ 0.000000] [<c024abfc>] (warn_slowpath_fmt) from [<c02292fc>]
(highbank_l2c310_write_sec+0x34/0x58)
[ 0.000000] [<c02292fc>] (highbank_l2c310_write_sec) from
[<c0223e44>] (l2c_configure+0x34/0x48)
[ 0.000000] [<c0223e44>] (l2c_configure) from [<c0224128>]
(l2c310_configure+0xc/0x16c)
[ 0.000000] [<c0224128>] (l2c310_configure) from [<c0223f40>]
(l2c_enable+0xe8/0xf8)
[ 0.000000] [<c0223f40>] (l2c_enable) from [<c0e5eb90>]
(l2c310_enable+0x140/0x21c)
[ 0.000000] [<c0e5eb90>] (l2c310_enable) from [<c0e5f474>]
(__l2c_init.part.6+0x19c/0x234)
[ 0.000000] [<c0e5f474>] (__l2c_init.part.6) from [<c0e5f7b4>]
(l2x0_of_init+0x208/0x254)
[ 0.000000] [<c0e5f7b4>] (l2x0_of_init) from [<c0e5947c>]
(init_IRQ+0x5c/0x80)
[ 0.000000] [<c0e5947c>] (init_IRQ) from [<c0e56adc>]
(start_kernel+0x244/0x3dc)
[ 0.000000] [<c0e56adc>] (start_kernel) from [<0020807c>] (0x20807c)
[ 0.000000] ---[ end trace cb88537fdc8fa200 ]---
[ 0.000000] L2C-310 dynamic clock gating disabled, standby mode
disabled
[ 0.000000] L2C-310 cache controller enabled, 8 ways, 128 kB
[ 0.000000] L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x02020000
[ 0.000000] clocksource: arm,sp804: mask: 0xffffffff max_cycles:
0xffffffff, max_idle_ns: 12741736309 ns
[ 0.000184] sched_clock: 32 bits at 150MHz, resolution 6ns, wraps
every 14316557820ns
[ 0.005851] Console: colour dummy device 80x30
[ 0.010978] Calibrating delay loop... 830.66 BogoMIPS (lpj=2076672)
[ 0.066316] pid_max: default: 32768 minimum: 301
[ 0.067955] Mount-cache hash table entries: 2048 (order: 1, 8192
bytes)
[ 0.068026] Mountpoint-cache hash table entries: 2048 (order: 1,
8192 bytes)
[ 0.080254] CPU: Testing write buffer coherency: ok
[ 0.091638] missing device node for CPU 0
[ 0.091966] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.092492] Setting up static identity map for 0x209000 - 0x209098
[ 0.105477] Brought up 1 CPUs
[ 0.105595] SMP: Total of 1 processors activated (830.66 BogoMIPS).
[ 0.105723] CPU: All CPU(s) started in SVC mode.
[ 0.161221] devtmpfs: initialized
[ 0.173367] VFP support v0.3: implementor 41 architecture 3 part
30 variant 9 rev 0
[ 0.191622] clocksource: jiffies: mask: 0xffffffff max_cycles:
0xffffffff, max_idle_ns: 9556302231375000 ns
[ 0.218111] pinctrl core: initialized pinctrl subsystem
[ 0.240982] NET: Registered protocol family 16
[ 0.264314] DMA: preallocated 256 KiB pool for atomic coherent
allocations
[ 0.273167] cpuidle: using governor menu
[ 0.291816] of_amba_device_create(): amba_device_add() failed
(-19) for /soc/ipc@fff20000
[ 0.296693] of_amba_device_create(): amba_device_add() failed
(-19) for /soc/dma@fff3d000
[ 0.301322] No ATAGs?
[ 0.301473] hw-breakpoint: debug architecture 0x4 unsupported.
[ 0.311969] Serial: AMBA PL011 UART driver
[ 0.314789] fff36000.serial: ttyAMA0 at MMIO 0xfff36000 (irq =
30, base_baud = 0) is a PL011 rev1
[ 0.361986] console [ttyAMA0] enabled
[ 0.424008] vgaarb: loaded
[ 0.429273] SCSI subsystem initialized
[ 0.432446] usbcore: registered new interface driver usbfs
[ 0.433301] usbcore: registered new interface driver hub
[ 0.434118] usbcore: registered new device driver usb
[ 0.438497] pps_core: LinuxPPS API ver. 1 registered
[ 0.438988] pps_core: Software ver. 5.3.6 - Copyright 2005-2007
Rodolfo Giometti <giometti@linux.it>
[ 0.439957] PTP clock support registered
[ 0.441054] EDAC MC: Ver: 3.0.0
[ 0.458770] clocksource: Switched to clocksource arm,sp804
[ 0.512003] NET: Registered protocol family 2
[ 0.519451] TCP established hash table entries: 8192 (order: 3,
32768 bytes)
[ 0.520405] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.522070] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.523533] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.524236] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.526354] NET: Registered protocol family 1
[ 0.531160] RPC: Registered named UNIX socket transport module.
[ 0.531952] RPC: Registered udp transport module.
[ 0.532391] RPC: Registered tcp transport module.
[ 0.532765] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.551747] Trying to unpack rootfs image as initramfs...
[ 0.772458] Freeing initrd memory: 428K (c8000000 - c806b000)
[ 0.774751] hw perfevents: enabled with armv7_cortex_a9 PMU
driver, 1 counters available
[ 0.780779] futex hash table entries: 256 (order: 2, 16384 bytes)
[ 0.823585] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.828308] NFS: Registering the id_resolver key type
[ 0.829517] Key type id_resolver registered
[ 0.829774] Key type id_legacy registered
[ 0.830580] ntfs: driver 2.1.32 [Flags: R/O].
[ 0.840916] bounce: pool size: 64 pages
[ 0.843410] Block layer SCSI generic (bsg) driver version 0.4
loaded (major 249)
[ 0.844144] io scheduler noop registered
[ 0.844440] io scheduler deadline registered
[ 0.844923] io scheduler cfq registered (default)
[ 1.147672] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 1.155398] SuperH (H)SCI(F) driver initialized
[ 1.158507] msm_serial: driver initialized
[ 1.159302] STMicroelectronics ASC driver initialized
[ 1.164268] [drm] Initialized drm 1.1.0 20060810
[ 1.232423] brd: module loaded
[ 1.272039] loop: module loaded
[ 1.281563] highbank-ahci ffe08000.sata: AHCI 0001.0000 32 slots
1 ports 1.5 Gbps 0x1 impl platform mode
[ 1.282249] highbank-ahci ffe08000.sata: flags: ncq only
[ 1.290241] scsi host0: sata_highbank
[ 1.296846] ata1: SATA max UDMA/133 mmio [mem
0xffe08000-0xffe17fff] port 0x100 irq 27
[ 1.317097] libphy: Fixed MDIO Bus: probed
[ 1.319831] CAN device driver interface
[ 1.322883] calxedaxgmac fff50000.ethernet (unnamed net_device)
(uninitialized): h/w version is 0x1012
[ 1.327766] calxedaxgmac fff51000.ethernet (unnamed net_device)
(uninitialized): h/w version is 0x1012
[ 1.333222] igb: Intel(R) Gigabit Ethernet Network Driver -
version 5.3.0-k
[ 1.333607] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 1.342007] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB
Ethernet driver
[ 1.342613] usbcore: registered new interface driver pegasus
[ 1.343188] usbcore: registered new interface driver asix
[ 1.343679] usbcore: registered new interface driver ax88179_178a
[ 1.344164] usbcore: registered new interface driver cdc_ether
[ 1.344760] usbcore: registered new interface driver smsc75xx
[ 1.345337] usbcore: registered new interface driver smsc95xx
[ 1.346240] usbcore: registered new interface driver net1080
[ 1.346742] usbcore: registered new interface driver cdc_subset
[ 1.347219] usbcore: registered new interface driver zaurus
[ 1.347861] usbcore: registered new interface driver cdc_ncm
[ 1.352913] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI)
Driver
[ 1.353397] ehci-pci: EHCI PCI platform driver
[ 1.354023] ehci-platform: EHCI generic platform driver
[ 1.354755] ehci-omap: OMAP-EHCI Host Controller driver
[ 1.355447] ehci-orion: EHCI orion driver
[ 1.356401] SPEAr-ehci: EHCI SPEAr driver
[ 1.357040] ehci-st: EHCI STMicroelectronics driver
[ 1.357691] ehci-exynos: EHCI EXYNOS driver
[ 1.358307] ehci-atmel: EHCI Atmel driver
[ 1.358907] tegra-ehci: Tegra EHCI driver
[ 1.359672] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.360467] ohci-pci: OHCI PCI platform driver
[ 1.361146] ohci-platform: OHCI generic platform driver
[ 1.361889] ohci-omap3: OHCI OMAP3 driver
[ 1.362535] SPEAr-ohci: OHCI SPEAr driver
[ 1.363201] ohci-st: OHCI STMicroelectronics driver
[ 1.364030] ohci-atmel: OHCI Atmel driver
[ 1.366552] usbcore: registered new interface driver usb-storage
[ 1.376379] mousedev: PS/2 mouse device common for all mice
[ 1.389381] rtc-pl031 fff35000.rtc: rtc core: registered pl031 as
rtc0
[ 1.396441] i2c /dev entries driver
[ 1.424256] hb_mc_edac fff00000.memory-controller: No ECC
present, or ECC disabled
[ 1.429835] EDAC DEVICE0: Giving out device to module hb_l2_edac
controller calxeda,hb-sregs-l2-ecc: DEV fff3c200.sregs (INTERRUPT)
[ 1.436472] sdhci: Secure Digital Host Controller Interface driver
[ 1.436868] sdhci: Copyright(c) Pierre Ossman
[ 1.442605] Synopsys Designware Multimedia Card Interface Driver
[ 1.446809] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.453659] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.455151] usbcore: registered new interface driver usbhid
[ 1.455559] usbhid: USB HID core driver
[ 1.479532] NET: Registered protocol family 10
[ 1.489877] sit: IPv6 over IPv4 tunneling driver
[ 1.494441] NET: Registered protocol family 17
[ 1.494878] can: controller area network core (rev 20120528 abi 9)
[ 1.495609] NET: Registered protocol family 29
[ 1.495939] can: raw protocol (rev 20120528)
[ 1.496268] can: broadcast manager protocol (rev 20120528 t)
[ 1.496630] can: netlink gateway (rev 20130117) max_hops=1
[ 1.499025] Key type dns_resolver registered
[ 1.499704] ThumbEE CPU extension supported.
[ 1.500037] Registering SWP/SWPB emulation handler
[ 1.514185] rtc-pl031 fff35000.rtc: setting system clock to
2016-02-20 10:36:54 UTC (1455964614)
[ 1.522492] uart-pl011 fff36000.serial: no DMA platform data
[ 1.769068] ata1: SATA link down (SStatus 0 SControl 300)
[ 1.801718] Freeing unused kernel memory: 1104K (c0e56000 - c0f6a000)
Type exit when done.
/bin/ash: can't access tty; job control turned off
(:1) / #
And for sure there is only one CPU activated:
(:1) / # cat /proc/interrupts
CPU0
16: 1003 GIC-0 29 Edge twd
17: 0 GIC-0 50 Level timer
25: 0 GIC-0 103 Level fff3c200.sregs
26: 0 GIC-0 104 Level fff3c200.sregs
27: 0 GIC-0 115 Level highbank-ahci[ffe08000.sata]
29: 0 GIC-0 51 Level rtc-pl031
30: 30 GIC-0 52 Level uart-pl011
33: 8 GIC-0 109 Level fff50000.ethernet
34: 0 GIC-0 110 Level fff50000.ethernet
36: 0 GIC-0 112 Level fff51000.ethernet
37: 0 GIC-0 113 Level fff51000.ethernet
IPI0: 0 CPU wakeup interrupts
IPI1: 0 Timer broadcast interrupts
IPI2: 0 Rescheduling interrupts
IPI3: 0 Function call interrupts
IPI4: 0 CPU stop interrupts
IPI5: 0 IRQ work interrupts
IPI6: 0 completion interrupts
Err: 0
(:1) / #
Am I missing something?
JC
Le 19/02/2016 22:06, Jean-Christophe DUBOIS a écrit :
> Le 19/02/2016 10:32, Peter Maydell a écrit :
>> On 19 February 2016 at 06:32, Jean-Christophe DUBOIS
>> <jcd@tribudubois.net> wrote:
>>> Le 18/02/2016 22:46, Peter Maydell a écrit :
>>>> Does SMP work with EL3 not enabled, or is this a different bug?
>>> If I set has_el3 to false, I can boot the 4 cores without problem. With
>>> has_el3 set to true (default value) I am getting the above behavior (boot OK
>>> in uniprocessor mode, and misbehaving if -smp >= 2).
>> Odd. If you can point me to a test image I can use to investigate
>> (preferably with System.map and commit hash of kernel used to build it)
>> I'll see if I can find time to have a look at what's going on there.
>
> I put my test image at the following address:
>
> http://dl.free.fr/rADch1Xnx
>
> You will get a tgz file with the following files in it:
>
> * imx6q-sabrelite.dtb
> * README
> * rootfs.cpio.gz
> * System.map
> * zImage
>
> Instruction to run the image are in the README file.
>
> The kernel is compiled using the imx_v6_v7_defconfig file (without
> modification) in the linux source tree
>
> Thanks
>
> JC
>
>> -- PMM
>>
>
[-- Attachment #2: Type: text/html, Size: 22064 bytes --]
next prev parent reply other threads:[~2016-02-20 10:55 UTC|newest]
Thread overview: 47+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-08 22:08 [Qemu-devel] [PATCH v2 0/9] Add i.MX6 (Single/Dual/Quad) support Jean-Christophe Dubois
2016-02-08 22:08 ` [Qemu-devel] [PATCH v2 1/9] i.MX: Allow GPT timer to rollover Jean-Christophe Dubois
2016-02-16 15:19 ` Peter Maydell
2016-02-08 22:08 ` [Qemu-devel] [PATCH v2 2/9] i.MX: Rename CCM NOCLK to CLK_NONE for naming consistency Jean-Christophe Dubois
2016-02-16 15:20 ` Peter Maydell
2016-02-08 22:08 ` [Qemu-devel] [PATCH v2 3/9] i.MX: Remove CCM useless clock computation handling Jean-Christophe Dubois
2016-02-16 15:20 ` Peter Maydell
2016-02-08 22:08 ` [Qemu-devel] [PATCH v2 4/9] i.MX: Add the CLK_IPG_HIGH clock Jean-Christophe Dubois
2016-02-16 15:20 ` Peter Maydell
2016-02-08 22:08 ` [Qemu-devel] [PATCH v2 5/9] i.MX: Add i.MX6 CCM and ANALOG device Jean-Christophe Dubois
2016-02-16 15:21 ` Peter Maydell
2016-02-29 17:33 ` Peter Maydell
2016-02-29 20:15 ` Jean-Christophe DUBOIS
2016-02-08 22:08 ` [Qemu-devel] [PATCH v2 6/9] i.MX: Add i.MX6 System Reset Controller device Jean-Christophe Dubois
2016-02-16 15:35 ` Peter Maydell
2016-02-27 16:57 ` Jean-Christophe DUBOIS
2016-02-27 17:43 ` Peter Maydell
2016-02-28 12:00 ` Jean-Christophe DUBOIS
2016-02-08 22:08 ` [Qemu-devel] [PATCH v2 7/9] i.MX: Add i.MX6 SOC implementation Jean-Christophe Dubois
2016-02-16 15:31 ` Peter Maydell
2016-02-16 20:49 ` Jean-Christophe DUBOIS
2016-02-16 21:06 ` Peter Maydell
2016-02-16 21:47 ` Jean-Christophe DUBOIS
2016-02-16 21:57 ` Peter Maydell
2016-02-18 20:51 ` Jean-Christophe DUBOIS
2016-02-18 21:46 ` Peter Maydell
2016-02-19 6:32 ` Jean-Christophe DUBOIS
2016-02-19 9:32 ` Peter Maydell
2016-02-19 21:06 ` Jean-Christophe DUBOIS
2016-02-20 10:55 ` Jean-Christophe DUBOIS [this message]
2016-02-20 15:30 ` Peter Crosthwaite
2016-02-20 18:03 ` Jean-Christophe DUBOIS
2016-02-21 3:42 ` Peter Crosthwaite
2016-02-21 13:42 ` Jean-Christophe DUBOIS
2016-02-29 17:58 ` Peter Maydell
2016-02-29 20:34 ` Jean-Christophe DUBOIS
2016-02-29 21:14 ` Peter Maydell
2016-02-29 21:32 ` Jean-Christophe DUBOIS
2016-03-01 16:19 ` Peter Maydell
2016-03-01 19:17 ` Jean-Christophe DUBOIS
2016-02-08 22:08 ` [Qemu-devel] [PATCH v2 8/9] i.MX: Add sabrelite i.MX6 emulation Jean-Christophe Dubois
2016-02-16 15:25 ` Peter Maydell
2016-02-08 22:08 ` [Qemu-devel] [PATCH v2 9/9] i.MX: Add missing descriptions in devices Jean-Christophe Dubois
2016-02-16 15:21 ` Peter Maydell
2016-02-28 20:27 ` [Qemu-devel] [PATCH v2 0/9] Add i.MX6 (Single/Dual/Quad) support Jean-Christophe DUBOIS
2016-03-01 19:18 ` Jean-Christophe DUBOIS
2016-03-01 19:27 ` Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=56C8461E.4050809@tribudubois.net \
--to=jcd@tribudubois.net \
--cc=crosthwaite.peter@gmail.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).