Ani
On Apr 28, 2020, 21:35 +0530, Michael S. Tsirkin <mst@redhat.com>, wrote:
> On Tue, Apr 28, 2020 at 10:16:52AM +0000, Ani Sinha wrote:
> > A new option "use_acpi_unplug" is introduced for PIIX which will
> > selectively only disable hot unplugging of both hot plugged and
> > cold plugged PCI devices on non-root PCI buses. This will prevent
> > hot unplugging of devices from Windows based guests from system
> > tray but will not prevent devices from being hot plugged into the
> > guest.
> >
> > It has been tested on Windows guests.
> >
> > Signed-off-by: Ani Sinha <ani.sinha@nutanix.com>
>
> It's still a non starter until we find something similar for PCIE and
> SHPC. Do guests check command status? Can some unplug commands fail?

Ok I  give up! I thought we debated this on the other thread.

>
>
> > ---
> > hw/acpi/piix4.c | 3 +++
> > hw/i386/acpi-build.c | 40 ++++++++++++++++++++++++++--------------
> > 2 files changed, 29 insertions(+), 14 deletions(-)
> >
> > diff --git a/hw/acpi/piix4.c b/hw/acpi/piix4.c
> > index 964d6f5..59fa707 100644
> > --- a/hw/acpi/piix4.c
> > +++ b/hw/acpi/piix4.c
> > @@ -78,6 +78,7 @@ typedef struct PIIX4PMState {
> >
> > AcpiPciHpState acpi_pci_hotplug;
> > bool use_acpi_pci_hotplug;
> > + bool use_acpi_unplug;
> >
> > uint8_t disable_s3;
> > uint8_t disable_s4;
> > @@ -633,6 +634,8 @@ static Property piix4_pm_properties[] = {
> > DEFINE_PROP_UINT8(ACPI_PM_PROP_S4_VAL, PIIX4PMState, s4_val, 2),
> > DEFINE_PROP_BOOL("acpi-pci-hotplug-with-bridge-support", PIIX4PMState,
> > use_acpi_pci_hotplug, true),
> > + DEFINE_PROP_BOOL("acpi-pci-hotunplug-enable-bridge", PIIX4PMState,
> > + use_acpi_unplug, true),
> > DEFINE_PROP_BOOL("memory-hotplug-support", PIIX4PMState,
> > acpi_memory_hotplug.is_enabled, true),
> > DEFINE_PROP_END_OF_LIST(),
> > diff --git a/hw/i386/acpi-build.c b/hw/i386/acpi-build.c
> > index 23c77ee..71b3ac3 100644
> > --- a/hw/i386/acpi-build.c
> > +++ b/hw/i386/acpi-build.c
> > @@ -96,6 +96,7 @@ typedef struct AcpiPmInfo {
> > bool s3_disabled;
> > bool s4_disabled;
> > bool pcihp_bridge_en;
> > + bool pcihup_bridge_en;
> > uint8_t s4_val;
> > AcpiFadtData fadt;
> > uint16_t cpu_hp_io_base;
> > @@ -240,6 +241,9 @@ static void acpi_get_pm_info(MachineState *machine, AcpiPmInfo *pm)
> > pm->pcihp_bridge_en =
> > object_property_get_bool(obj, "acpi-pci-hotplug-with-bridge-support",
> > NULL);
> > + pm->pcihup_bridge_en =
> > + object_property_get_bool(obj, "acpi-pci-hotunplug-enable-bridge",
> > + NULL);
> > }
> >
> > static void acpi_get_misc_info(AcpiMiscInfo *info)
> > @@ -451,7 +455,8 @@ static void build_append_pcihp_notify_entry(Aml *method, int slot)
> > }
> >
> > static void build_append_pci_bus_devices(Aml *parent_scope, PCIBus *bus,
> > - bool pcihp_bridge_en)
> > + bool pcihp_bridge_en,
> > + bool pcihup_bridge_en)
> > {
> > Aml *dev, *notify_method = NULL, *method;
> > QObject *bsel;
> > @@ -479,11 +484,14 @@ static void build_append_pci_bus_devices(Aml *parent_scope, PCIBus *bus,
> > dev = aml_device("S%.02X", PCI_DEVFN(slot, 0));
> > aml_append(dev, aml_name_decl("_SUN", aml_int(slot)));
> > aml_append(dev, aml_name_decl("_ADR", aml_int(slot << 16)));
> > - method = aml_method("_EJ0", 1, AML_NOTSERIALIZED);
> > - aml_append(method,
> > - aml_call2("PCEJ", aml_name("BSEL"), aml_name("_SUN"))
> > - );
> > - aml_append(dev, method);
> > + if (pcihup_bridge_en || pci_bus_is_root(bus)) {
> > + method = aml_method("_EJ0", 1, AML_NOTSERIALIZED);
> > + aml_append(method,
> > + aml_call2("PCEJ", aml_name("BSEL"),
> > + aml_name("_SUN"))
> > + );
> > + aml_append(dev, method);
> > + }
> > aml_append(parent_scope, dev);
> >
> > build_append_pcihp_notify_entry(notify_method, slot);
> > @@ -537,12 +545,14 @@ static void build_append_pci_bus_devices(Aml *parent_scope, PCIBus *bus,
> > /* add _SUN/_EJ0 to make slot hotpluggable */
> > aml_append(dev, aml_name_decl("_SUN", aml_int(slot)));
> >
> > - method = aml_method("_EJ0", 1, AML_NOTSERIALIZED);
> > - aml_append(method,
> > - aml_call2("PCEJ", aml_name("BSEL"), aml_name("_SUN"))
> > - );
> > - aml_append(dev, method);
> > -
> > + if (pcihup_bridge_en || pci_bus_is_root(bus)) {
> > + method = aml_method("_EJ0", 1, AML_NOTSERIALIZED);
> > + aml_append(method,
> > + aml_call2("PCEJ", aml_name("BSEL"),
> > + aml_name("_SUN"))
> > + );
> > + aml_append(dev, method);
> > + }
> > if (bsel) {
> > build_append_pcihp_notify_entry(notify_method, slot);
> > }
> > @@ -553,7 +563,8 @@ static void build_append_pci_bus_devices(Aml *parent_scope, PCIBus *bus,
> > */
> > PCIBus *sec_bus = pci_bridge_get_sec_bus(PCI_BRIDGE(pdev));
> >
> > - build_append_pci_bus_devices(dev, sec_bus, pcihp_bridge_en);
> > + build_append_pci_bus_devices(dev, sec_bus, pcihp_bridge_en,
> > + pcihup_bridge_en);
> > }
> > /* slot descriptor has been composed, add it into parent context */
> > aml_append(parent_scope, dev);
> > @@ -2196,7 +2207,8 @@ build_dsdt(GArray *table_data, BIOSLinker *linker,
> > if (bus) {
> > Aml *scope = aml_scope("PCI0");
> > /* Scan all PCI buses. Generate tables to support hotplug. */
> > - build_append_pci_bus_devices(scope, bus, pm->pcihp_bridge_en);
> > + build_append_pci_bus_devices(scope, bus, pm->pcihp_bridge_en,
> > + pm->pcihup_bridge_en);
> >
> > if (TPM_IS_TIS_ISA(tpm)) {
> > if (misc->tpm_version == TPM_VERSION_2_0) {
> > --
> > 1.9.4
>