Re: [Qemu-devel] [PATCH v6 0/9] Clock framework API

[Damien Hedde <damien.hedde@greensocs.com>]

I did a typo in the reply-to address. I just resent the series with the
proper one.

Sorry for that...
Damien

On 9/4/19 11:38 AM, damien.hedde@greensocs.con wrote:
> From: Damien Hedde <damien.hedde@greensocs.com>
> 
> This series aims to add a way to model clock distribution in qemu. This allows
> to model the clock tree of a platform allowing us to inspect clock
> configuration and detect problems such as disabled clock or bad configured
> pll.
> 
> The added clock api is very similar the the gpio api for devices. We can add
> input and output and connect them together.
> 
> Very few changes since v5 in the core patches: we were waiting for multi phase
> ability to allow proper initialization of the clock tree. So this is almost a
> simple rebase on top of the current "Multi-phase reset mechanism" series.
> Based-on: <20190821163341.16309-1-damien.hedde@greensocs.com>
> 
> Changes since v5:
>  - drop the "-port" in file names
>  - new patch 2, extracted from patch 1 (to fix some problem with linux-user builds)
>  - patch 3, minor modification to better match gpios api and allow non device-related clock
>    (I've dropped the reviewed-by, see the patch message for the details of what has changed).
>  - patch 6, Philippe's comments and various improvement
>  - patches 7/8/9, multi-phase reset addition and scope reduced to uart ref clocks
> 
> The patches are organised as follows:
> + Patches 1 to 5 adds the clock support in qemu (1, 4 and 5 are already reviewed and
>   also a big part of the 3)
> + Patch 6 add some documentation in docs/devel
> + Patches 7 to 9 adds the uart's clocks to the xilinx_zynq platform as an
> example for this framework. It updates the zynq's slcr clock controller, the 
> cadence_uart device, and the zynq toplevel platform.
> 
> I've tested this patchset on the xilinx-zynq-a9 machine with the buildroot's
> zynq_zc706_defconfig which package the Xilinx's Linux.
> Clocks are correctly updated and we ends up with a configured baudrate of 115601
> on the console uart (for a theoretical 115200) which is nice. "cadence_uart*" and
> "clock*" traces can be enabled to see what's going on in this platform.
> 
> Any comments and suggestion are welcomed.
> 
> Thanks to the Xilinx QEMU team who sponsored this development.
> 
> Damien Hedde (9):
>   hw/core/clock: introduce clock objects
>   hw/core/clock-vmstate: define a vmstate entry for clock state
>   qdev: add clock input&output support to devices.
>   qdev-monitor: print the device's clock with info qtree
>   qdev-clock: introduce an init array to ease the device construction
>   docs/clocks: add device's clock documentation
>   hw/misc/zynq_slcr: add clock generation for uarts
>   hw/char/cadence_uart: add clock support
>   hw/arm/xilinx_zynq: connect uart clocks to slcr
> 
>  Makefile.objs                  |   1 +
>  docs/devel/clock.txt           | 246 +++++++++++++++++++++++++++++++++
>  hw/arm/xilinx_zynq.c           |  64 +++++++--
>  hw/char/cadence_uart.c         |  85 ++++++++++--
>  hw/char/trace-events           |   3 +
>  hw/core/Makefile.objs          |   4 +-
>  hw/core/clock-vmstate.c        |  25 ++++
>  hw/core/clock.c                | 144 +++++++++++++++++++
>  hw/core/qdev-clock.c           | 181 ++++++++++++++++++++++++
>  hw/core/qdev.c                 |  32 +++++
>  hw/core/trace-events           |   6 +
>  hw/misc/zynq_slcr.c            | 145 ++++++++++++++++++-
>  include/hw/char/cadence_uart.h |   1 +
>  include/hw/clock.h             | 133 ++++++++++++++++++
>  include/hw/qdev-clock.h        | 134 ++++++++++++++++++
>  include/hw/qdev-core.h         |  14 ++
>  qdev-monitor.c                 |  13 ++
>  tests/Makefile.include         |   1 +
>  18 files changed, 1210 insertions(+), 22 deletions(-)
>  create mode 100644 docs/devel/clock.txt
>  create mode 100644 hw/core/clock-vmstate.c
>  create mode 100644 hw/core/clock.c
>  create mode 100644 hw/core/qdev-clock.c
>  create mode 100644 include/hw/clock.h
>  create mode 100644 include/hw/qdev-clock.h
>