QEMU-Devel Archive on lore.kernel.org
 help / color / Atom feed
From: Markus Armbruster <armbru@redhat.com>
To: Peter Maydell <peter.maydell@linaro.org>
Cc: "John Snow" <jsnow@redhat.com>,
	"Daniel P. Berrangé" <berrange@redhat.com>,
	qemu-devel@nongnu.org, "Stefan Hajnoczi" <stefanha@redhat.com>,
	"Michael Roth" <mdroth@linux.vnet.ibm.com>
Subject: Re: [PATCH v2 17/30] qapi/migration.json: Replace _this_ with *this*
Date: Fri, 14 Feb 2020 15:35:28 +0100
Message-ID: <874kvttexb.fsf@dusky.pond.sub.org> (raw)
In-Reply-To: <20200213175647.17628-18-peter.maydell@linaro.org> (Peter Maydell's message of "Thu, 13 Feb 2020 17:56:34 +0000")

Peter Maydell <peter.maydell@linaro.org> writes:

> The MigrationInfo::setup-time documentation is the only place where
> we use _this_ inline markup for emphasis, commonly rendered in
> italics.  rST doesn't recognize that markup and emits literal
> underscores.
>
> Switch to *this* instead.  Changes markup to strong emphasis with
> Texinfo, commonly rendered as bold.  With rST, it will go right back
> to emphasis / italics.
>
> rST also uses **this** for strong (commonly rendered bold) where
> Texinfo uses *this*. We have one place in the doc comments
> which uses strong/bold markup, in qapi/introspect.json:
>     Note: the QAPI schema is also used to help define *internal*
>
> When we switch to rST that will be rendered as emphasis / italics.
> Markus (who wrote that) thinks that using emphasis / italics
> there is an improvement, so we leave that markup alone.
>
> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
> Reviewed-by: Markus Armbruster <armbru@redhat.com>
> ---
> v1->v2: updated commit message. Paras 1 and 2 are from Markus;
> paras 3 and 4 are new, and mention a non-change agreed in
> the thread off the cover letter of the v1 patch series.

I appreciate your diligent notes here.  Thanks!

> ---
>  qapi/migration.json | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/qapi/migration.json b/qapi/migration.json
> index 11033b7a8e6..52f34299698 100644
> --- a/qapi/migration.json
> +++ b/qapi/migration.json
> @@ -178,8 +178,8 @@
>  #                     expected downtime in milliseconds for the guest in last walk
>  #                     of the dirty bitmap. (since 1.3)
>  #
> -# @setup-time: amount of setup time in milliseconds _before_ the
> -#              iterations begin but _after_ the QMP command is issued. This is designed
> +# @setup-time: amount of setup time in milliseconds *before* the
> +#              iterations begin but *after* the QMP command is issued. This is designed
>  #              to provide an accounting of any activities (such as RDMA pinning) which
>  #              may be expensive, but do not actually occur during the iterative
>  #              migration rounds themselves. (since 1.6)

Reviewed-by: Markus Armbruster <armbru@redhat.com>



  parent reply index

Thread overview: 69+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-02-13 17:56 [PATCH v2 00/30] Convert QAPI doc comments to generate rST instead of texinfo Peter Maydell
2020-02-13 17:56 ` [PATCH v2 01/30] configure: Allow user to specify sphinx-build binary Peter Maydell
2020-02-14  6:33   ` Markus Armbruster
2020-02-14  9:21     ` Peter Maydell
2020-02-14 12:20       ` Markus Armbruster
2020-02-14 12:39         ` Peter Maydell
2020-02-14 17:18           ` Markus Armbruster
2020-02-14 17:36             ` Peter Maydell
2020-02-15 10:37               ` Markus Armbruster
2020-02-13 17:56 ` [PATCH v2 02/30] configure: Check that sphinx-build is using Python 3 Peter Maydell
2020-02-13 17:56 ` [PATCH v2 03/30] Makefile: Fix typo in dependency list for interop manpages Peter Maydell
2020-02-13 17:56 ` [PATCH v2 04/30] qga/qapi-schema.json: Fix missing '-' in GuestDiskBusType doc comment Peter Maydell
2020-02-13 17:56 ` [PATCH v2 05/30] qga/qapi-schema.json: Fix indent level on doc comments Peter Maydell
2020-02-14 12:36   ` Markus Armbruster
2020-02-14 12:40     ` Peter Maydell
2020-02-14 14:26       ` Markus Armbruster
2020-02-13 17:56 ` [PATCH v2 06/30] qga/qapi-schema.json: minor format fixups for rST Peter Maydell
2020-02-14 12:46   ` Markus Armbruster
2020-02-14 14:33     ` Markus Armbruster
2020-02-13 17:56 ` [PATCH v2 07/30] qapi/block-core.json: Use literal block for ascii art Peter Maydell
2020-02-13 22:59   ` Aleksandar Markovic
2020-02-15 20:56     ` Philippe Mathieu-Daudé
2020-02-15 21:01       ` Aleksandar Markovic
2020-02-17  0:44         ` Philippe Mathieu-Daudé
2020-02-17  5:53           ` Samuel Thibault
2020-02-14 12:53   ` Markus Armbruster
2020-02-13 17:56 ` [PATCH v2 08/30] qapi: Use ':' after @argument in doc comments Peter Maydell
2020-02-14 13:02   ` Markus Armbruster
2020-02-14 13:28     ` Markus Armbruster
2020-02-13 17:56 ` [PATCH v2 09/30] qapi: Fix indent level on doc comments in json files Peter Maydell
2020-02-14 13:45   ` Markus Armbruster
2020-02-13 17:56 ` [PATCH v2 10/30] qapi: Remove hardcoded tabs Peter Maydell
2020-02-13 17:56 ` [PATCH v2 11/30] qapi/ui.json: Put input-send-event body text in the right place Peter Maydell
2020-02-13 17:56 ` [PATCH v2 12/30] qapi/ui.json: Avoid `...' texinfo style quoting Peter Maydell
2020-02-13 17:56 ` [PATCH v2 13/30] qapi/block-core.json: Use explicit bulleted lists Peter Maydell
2020-02-13 17:56 ` [PATCH v2 14/30] qapi/ui.json: " Peter Maydell
2020-02-14 14:20   ` Markus Armbruster
2020-02-13 17:56 ` [PATCH v2 15/30] qapi/{block, misc, tmp, net}.json: " Peter Maydell
2020-02-14 14:23   ` Markus Armbruster
2020-02-14 14:28     ` Peter Maydell
2020-02-14 15:46       ` Markus Armbruster
2020-02-14 15:48         ` Peter Maydell
2020-02-13 17:56 ` [PATCH v2 16/30] qapi: Add blank lines before " Peter Maydell
2020-02-14 14:33   ` Markus Armbruster
2020-02-14 16:02     ` Markus Armbruster
2020-02-14 16:16       ` Peter Maydell
2020-02-14 17:11         ` Markus Armbruster
2020-02-13 17:56 ` [PATCH v2 17/30] qapi/migration.json: Replace _this_ with *this* Peter Maydell
2020-02-13 19:02   ` Philippe Mathieu-Daudé
2020-02-14 14:35   ` Markus Armbruster [this message]
2020-02-13 17:56 ` [PATCH v2 18/30] qapi: Delete all the "foo: dropped in n.n" notes Peter Maydell
2020-02-14  6:55   ` Markus Armbruster
2020-02-14 15:13     ` Markus Armbruster
2020-02-14 15:20       ` Peter Maydell
2020-02-13 17:56 ` [PATCH v2 19/30] qapi/qapi-schema.json: Put headers in their own doc-comment blocks Peter Maydell
2020-02-13 17:56 ` [PATCH v2 20/30] qapi/machine.json: Escape a literal '*' in doc comment Peter Maydell
2020-02-13 19:01   ` Philippe Mathieu-Daudé
2020-02-13 17:56 ` [PATCH v2 21/30] tests/qapi/doc-good.json: Clean up markup Peter Maydell
2020-02-13 17:56 ` [PATCH v2 22/30] scripts/qapi: Move doc-comment whitespace stripping to doc.py Peter Maydell
2020-02-13 17:56 ` [PATCH v2 23/30] scripts/qapi/parser.py: improve doc comment indent handling Peter Maydell
2020-02-13 17:56 ` [PATCH v2 24/30] docs/sphinx: Add new qapi-doc Sphinx extension Peter Maydell
2020-02-13 17:56 ` [PATCH v2 25/30] docs/interop: Convert qemu-ga-ref to rST Peter Maydell
2020-02-13 17:56 ` [PATCH v2 26/30] docs/interop: Convert qemu-qmp-ref " Peter Maydell
2020-02-17 15:10   ` Peter Maydell
2020-02-13 17:56 ` [PATCH v2 27/30] qapi: Use rST markup for literal blocks Peter Maydell
2020-02-13 17:56 ` [PATCH v2 28/30] qga/qapi-schema.json: Add some headings Peter Maydell
2020-02-13 17:56 ` [PATCH v2 29/30] scripts/qapi: Remove texinfo generation support Peter Maydell
2020-02-13 17:56 ` [PATCH v2 30/30] docs/devel/qapi-code-gen.txt: Update to new rST backend conventions Peter Maydell
2020-02-13 20:51 ` [PATCH v2 00/30] Convert QAPI doc comments to generate rST instead of texinfo no-reply

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=874kvttexb.fsf@dusky.pond.sub.org \
    --to=armbru@redhat.com \
    --cc=berrange@redhat.com \
    --cc=jsnow@redhat.com \
    --cc=mdroth@linux.vnet.ibm.com \
    --cc=peter.maydell@linaro.org \
    --cc=qemu-devel@nongnu.org \
    --cc=stefanha@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

QEMU-Devel Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/qemu-devel/0 qemu-devel/git/0.git
	git clone --mirror https://lore.kernel.org/qemu-devel/1 qemu-devel/git/1.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 qemu-devel qemu-devel/ https://lore.kernel.org/qemu-devel \
		qemu-devel@nongnu.org
	public-inbox-index qemu-devel

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.nongnu.qemu-devel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git