qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: "Cédric Le Goater" <clg@kaod.org>
To: Joel Stanley <joel@jms.id.au>,
	Peter Maydell <peter.maydell@linaro.org>,
	Andrew Jeffery <andrew@aj.id.au>
Cc: qemu-arm@nongnu.org, qemu-devel@nongnu.org
Subject: Re: [PATCH 4/4] watchdog/aspeed: Fix AST2600 frequency behaviour
Date: Tue, 12 Nov 2019 08:56:33 +0100	[thread overview]
Message-ID: <87e0a727-bfd5-a485-e986-e26fd4cccfef@kaod.org> (raw)
In-Reply-To: <20191112064058.13275-5-joel@jms.id.au>

On 12/11/2019 07:40, Joel Stanley wrote:
> The AST2600 control register sneakily changed the meaning of bit 4
> without anyone noticing. It no longer controls the 1MHz vs APB clock
> select, and instead always runs at 1MHz.
> 
> The AST2500 was always 1MHz too, but it retained bit 4, making it read
> only. We can model both using the same fixed 1MHz calculation.
> 
> Fixes: ea29711f467f ("watchdog/aspeed: Fix AST2600 control reg behaviour")

which commit is that ^ ? Did you mean :

Fixes: 6b2b2a703cad ("hw: wdt_aspeed: Add AST2600 support")

> Signed-off-by: Joel Stanley <joel@jms.id.au>

Reviewed-by: Cédric Le Goater <clg@kaod.org>

C.

> ---
>  hw/watchdog/wdt_aspeed.c         | 21 +++++++++++++++++----
>  include/hw/watchdog/wdt_aspeed.h |  1 +
>  2 files changed, 18 insertions(+), 4 deletions(-)
> 
> diff --git a/hw/watchdog/wdt_aspeed.c b/hw/watchdog/wdt_aspeed.c
> index 5697ed83325a..f43a3bc88976 100644
> --- a/hw/watchdog/wdt_aspeed.c
> +++ b/hw/watchdog/wdt_aspeed.c
> @@ -93,11 +93,11 @@ static uint64_t aspeed_wdt_read(void *opaque, hwaddr offset, unsigned size)
>  
>  }
>  
> -static void aspeed_wdt_reload(AspeedWDTState *s, bool pclk)
> +static void aspeed_wdt_reload(AspeedWDTState *s)
>  {
>      uint64_t reload;
>  
> -    if (pclk) {
> +    if (!(s->regs[WDT_CTRL] & WDT_CTRL_1MHZ_CLK)) {
>          reload = muldiv64(s->regs[WDT_RELOAD_VALUE], NANOSECONDS_PER_SECOND,
>                            s->pclk_freq);
>      } else {
> @@ -109,6 +109,16 @@ static void aspeed_wdt_reload(AspeedWDTState *s, bool pclk)
>      }
>  }
>  
> +static void aspeed_wdt_reload_1mhz(AspeedWDTState *s)
> +{
> +    uint64_t reload = s->regs[WDT_RELOAD_VALUE] * 1000ULL;
> +
> +    if (aspeed_wdt_is_enabled(s)) {
> +        timer_mod(s->timer, qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + reload);
> +    }
> +}
> +
> +
>  static void aspeed_wdt_write(void *opaque, hwaddr offset, uint64_t data,
>                               unsigned size)
>  {
> @@ -130,13 +140,13 @@ static void aspeed_wdt_write(void *opaque, hwaddr offset, uint64_t data,
>      case WDT_RESTART:
>          if ((data & 0xFFFF) == WDT_RESTART_MAGIC) {
>              s->regs[WDT_STATUS] = s->regs[WDT_RELOAD_VALUE];
> -            aspeed_wdt_reload(s, !(s->regs[WDT_CTRL] & WDT_CTRL_1MHZ_CLK));
> +            awc->wdt_reload(s);
>          }
>          break;
>      case WDT_CTRL:
>          if (enable && !aspeed_wdt_is_enabled(s)) {
>              s->regs[WDT_CTRL] = data;
> -            aspeed_wdt_reload(s, !(data & WDT_CTRL_1MHZ_CLK));
> +            awc->wdt_reload(s);
>          } else if (!enable && aspeed_wdt_is_enabled(s)) {
>              s->regs[WDT_CTRL] = data;
>              timer_del(s->timer);
> @@ -283,6 +293,7 @@ static void aspeed_2400_wdt_class_init(ObjectClass *klass, void *data)
>      awc->offset = 0x20;
>      awc->ext_pulse_width_mask = 0xff;
>      awc->reset_ctrl_reg = SCU_RESET_CONTROL1;
> +    awc->wdt_reload = aspeed_wdt_reload;
>  }
>  
>  static const TypeInfo aspeed_2400_wdt_info = {
> @@ -317,6 +328,7 @@ static void aspeed_2500_wdt_class_init(ObjectClass *klass, void *data)
>      awc->ext_pulse_width_mask = 0xfffff;
>      awc->reset_ctrl_reg = SCU_RESET_CONTROL1;
>      awc->reset_pulse = aspeed_2500_wdt_reset_pulse;
> +    awc->wdt_reload = aspeed_wdt_reload_1mhz;
>  }
>  
>  static const TypeInfo aspeed_2500_wdt_info = {
> @@ -336,6 +348,7 @@ static void aspeed_2600_wdt_class_init(ObjectClass *klass, void *data)
>      awc->ext_pulse_width_mask = 0xfffff; /* TODO */
>      awc->reset_ctrl_reg = AST2600_SCU_RESET_CONTROL1;
>      awc->reset_pulse = aspeed_2500_wdt_reset_pulse;
> +    awc->wdt_reload = aspeed_wdt_reload_1mhz;
>  }
>  
>  static const TypeInfo aspeed_2600_wdt_info = {
> diff --git a/include/hw/watchdog/wdt_aspeed.h b/include/hw/watchdog/wdt_aspeed.h
> index dfedd7662dd1..819c22993a6e 100644
> --- a/include/hw/watchdog/wdt_aspeed.h
> +++ b/include/hw/watchdog/wdt_aspeed.h
> @@ -47,6 +47,7 @@ typedef struct AspeedWDTClass {
>      uint32_t ext_pulse_width_mask;
>      uint32_t reset_ctrl_reg;
>      void (*reset_pulse)(AspeedWDTState *s, uint32_t property);
> +    void (*wdt_reload)(AspeedWDTState *s);
>  }  AspeedWDTClass;
>  
>  #endif /* WDT_ASPEED_H */
> 



  reply	other threads:[~2019-11-12  7:57 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-11-12  6:40 [PATCH 0/4] arm/aspeed: Watchdog and SDRAM fixes Joel Stanley
2019-11-12  6:40 ` [PATCH 1/4] aspeed/sdmc: Make ast2600 default 1G Joel Stanley
2019-11-12  7:45   ` Cédric Le Goater
2019-11-12  6:40 ` [PATCH 2/4] aspeed/scu: Fix W1C behavior Joel Stanley
2019-11-12  7:45   ` Cédric Le Goater
2019-11-12  6:40 ` [PATCH 3/4] watchdog/aspeed: Improve watchdog timeout message Joel Stanley
2019-11-12  7:52   ` Cédric Le Goater
2019-11-12  6:40 ` [PATCH 4/4] watchdog/aspeed: Fix AST2600 frequency behaviour Joel Stanley
2019-11-12  7:56   ` Cédric Le Goater [this message]
2019-11-13  0:48     ` Joel Stanley
2019-11-12 15:05 ` [PATCH 0/4] arm/aspeed: Watchdog and SDRAM fixes no-reply

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=87e0a727-bfd5-a485-e986-e26fd4cccfef@kaod.org \
    --to=clg@kaod.org \
    --cc=andrew@aj.id.au \
    --cc=joel@jms.id.au \
    --cc=peter.maydell@linaro.org \
    --cc=qemu-arm@nongnu.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).