messages from 2019-08-23 15:06:12 to 2019-08-23 23:56:17 UTC [more...]
[Qemu-devel] [PATCH v1 00/28] Add RISC-V Hypervisor Extension v0.4
2019-08-23 23:38 UTC (15+ messages)
` [Qemu-devel] [PATCH v1 01/28] target/riscv: Add the Hypervisor extension
` [Qemu-devel] [PATCH v1 02/28] target/riscv: Add the virtulisation mode
` [Qemu-devel] [PATCH v1 03/28] target/riscv: Add the force HS exception mode
` [Qemu-devel] [PATCH v1 04/28] target/riscv: Fix CSR perm checking for HS mode
` [Qemu-devel] [PATCH v1 05/28] target/riscv: Add the Hypervisor CSRs to CPUState
` [Qemu-devel] [PATCH v1 06/28] target/riscv: Print priv and virt in disas log
` [Qemu-devel] [PATCH v1 07/28] target/riscv: Dump Hypervisor registers if enabled
` [Qemu-devel] [PATCH v1 08/28] target/riscv: Add Hypervisor CSR access functions
` [Qemu-devel] [PATCH v1 10/28] target/riscv: Convert mie and mstatus to pointers
` [Qemu-devel] [PATCH v1 11/28] target/riscv: Add background register swapping function
` [Qemu-devel] [PATCH v1 12/28] target/riscv: Add support for virtual interrupt setting
` [Qemu-devel] [PATCH v1 13/28] target/ricsv: Flush the TLB on virtulisation mode changes
` [Qemu-devel] [PATCH v1 14/28] target/riscv: Generate illegal instruction on WFI when V=1
` [Qemu-devel] [PATCH v1 15/28] riscv: plic: Always set sip.SEIP bit for HS
[Qemu-devel] [PATCH v3] RISC-V: Select FPU gdb xml file based on the supported extensions
2019-08-23 22:44 UTC (2+ messages)
[Qemu-devel] [PATCH v9 00/20] Invert Endian bit in SPARCv9 MMU TTE
2019-08-23 22:27 UTC (28+ messages)
` [Qemu-devel] [PATCH v9 01/20] tcg: TCGMemOp is now accelerator independent MemOp
` [Qemu-devel] [PATCH v9 02/20] memory: Introduce size_memop
` [Qemu-devel] [PATCH v9 03/20] target/mips: Access MemoryRegion with MemOp
` [Qemu-devel] [PATCH v9 04/20] hw/s390x: "
` [Qemu-devel] [PATCH v9 05/20] hw/intc/armv7m_nic: "
` [Qemu-devel] [PATCH v9 06/20] hw/virtio: "
` [Qemu-devel] [PATCH v9 07/20] hw/vfio: "
` [Qemu-devel] [PATCH v9 08/20] exec: "
` [Qemu-devel] [PATCH v9 09/20] cputlb: "
` [Qemu-devel] [PATCH v9 10/20] memory: "
` [Qemu-devel] [PATCH v9 11/20] hw/s390x: Hard code size with MO_{8|16|32|64}
` [Qemu-devel] [PATCH v9 12/20] target/mips: "
` [Qemu-devel] [PATCH v9 13/20] exec: "
` [Qemu-devel] [PATCH v9 14/20] memory: Access MemoryRegion with endianness
` [Qemu-devel] [PATCH v9 15/20] cputlb: Replace size and endian operands for MemOp
` [Qemu-devel] [PATCH v9 16/20] memory: Single byte swap along the I/O path
` [Qemu-devel] [PATCH v9 17/20] cpu: TLB_FLAGS_MASK bit to force memory slow path
` [Qemu-devel] [PATCH v9 18/20] cputlb: Byte swap memory transaction attribute
` [Qemu-devel] [PATCH v9 19/20] target/sparc: Add TLB entry with attributes
` [Qemu-devel] [PATCH v9 20/20] target/sparc: sun4u Invert Endian TTE bit
[Qemu-devel] [PATCH] configure: more resilient Python version capture
2019-08-23 21:54 UTC
[Qemu-devel] [PATCH 0/4] docs: add docs about use of automatic cleanup functions
2019-08-23 21:48 UTC (8+ messages)
` [Qemu-devel] [PATCH 1/4] docs: convert CODING_STYLE and HACKING to markdown syntax
` [Qemu-devel] [PATCH 2/4] docs: merge HACKING.md contents into CODING_STYLE.md
` [Qemu-devel] [PATCH 3/4] docs: document use of automatic cleanup functions in glib
` [Qemu-devel] [PATCH 4/4] docs: add table of contents to CODING_STYLE.md
[Qemu-devel] cross-project patches: Add NBD Fast Zero support
2019-08-23 21:16 UTC (12+ messages)
` [Qemu-devel] [PATCH 0/1] NBD protocol change to add fast zero support
` [Qemu-devel] [PATCH 1/1] protocol: Add NBD_CMD_FLAG_FAST_ZERO
` [Qemu-devel] [PATCH 0/5] Add NBD fast zero support to qemu client and server
` [Qemu-devel] [PATCH 5/5] nbd: Tolerate more errors to structured reply request
` [Qemu-devel] [nbdkit PATCH 0/3] nbdkit support for new NBD fast zero
` [Qemu-devel] [nbdkit PATCH 3/3] plugins: Add .can_fast_zero hook
` [Qemu-devel] [Libguestfs] "
[Qemu-devel] [PATCH v5 0/4] virtio/block: handle zoned backing devices
2019-08-23 20:08 UTC (6+ messages)
` [Qemu-devel] [PATCH v5 1/4] block: Add zoned device model property
` [Qemu-devel] [PATCH v5 2/4] raw: Recognize zoned backing devices
` [Qemu-devel] [PATCH v5 3/4] block/ide/scsi: Set BLK_PERM_SUPPORT_ZONED
` [Qemu-devel] [PATCH v5 4/4] raw: Don't open ZBDs if backend can't handle them
[Qemu-devel] [RFC PATCH 00/17] Declare device little or big endian
2019-08-23 20:05 UTC (20+ messages)
` [Qemu-devel] [RFC PATCH 01/17] hw/audio: "
` [Qemu-devel] [RFC PATCH 02/17] hw/block: "
` [Qemu-devel] [RFC PATCH 03/17] hw/char: "
` [Qemu-devel] [RFC PATCH 04/17] hw/display: "
` [Qemu-devel] [RFC PATCH 05/17] hw/dma: "
` [Qemu-devel] [RFC PATCH 06/17] hw/gpio: "
` [Qemu-devel] [RFC PATCH 07/17] hw/i2c: "
` [Qemu-devel] [RFC PATCH 08/17] hw/input: "
` [Qemu-devel] [RFC PATCH 09/17] hw/intc: "
` [Qemu-devel] [RFC PATCH 10/17] hw/isa: "
` [Qemu-devel] [RFC PATCH 11/17] hw/misc: "
` [Qemu-devel] [RFC PATCH 12/17] hw/net: "
` [Qemu-devel] [RFC PATCH 13/17] hw/pci-host: "
` [Qemu-devel] [RFC PATCH 14/17] hw/sd: "
` [Qemu-devel] [RFC PATCH 15/17] hw/ssi: "
` [Qemu-devel] [RFC PATCH 16/17] hw/timer: "
` [Qemu-devel] [RFC PATCH 17/17] build: Correct non-common common-obj-* to obj-*
[Qemu-devel] [PATCH v4 0/4] virtio/block: handle zoned backing devices
2019-08-23 19:52 UTC (6+ messages)
` [Qemu-devel] [PATCH v4 1/4] block: Add zoned device model property
` [Qemu-devel] [PATCH v4 2/4] raw: Recognize zoned backing devices
` [Qemu-devel] [PATCH v4 3/4] block/ide/scsi: Set BLK_PERM_SUPPORT_ZONED
` [Qemu-devel] [PATCH v4 4/4] raw: Don't open ZBDs if backend can't handle them
[Qemu-devel] [PATCH 0/9] Delete enum device_endian
2019-08-23 19:42 UTC (10+ messages)
` [Qemu-devel] [PATCH 1/9] exec: Map device_endian onto MemOp
` [Qemu-devel] [PATCH 2/9] exec: Replace DEVICE_NATIVE_ENDIAN with MO_TE
` [Qemu-devel] [PATCH 3/9] exec: Replace DEVICE_LITTLE_ENDIAN with MO_LE
` [Qemu-devel] [PATCH 4/9] exec: Replace DEVICE_BIG_ENDIAN with MO_BE
` [Qemu-devel] [PATCH 5/9] exec: Replace enum device_endian with MemOp
` [Qemu-devel] [PATCH 6/9] memory: Delete devend_memop
` [Qemu-devel] [PATCH 7/9] exec: Delete device_endian
` [Qemu-devel] [PATCH 8/9] exec: Delete DEVICE_HOST_ENDIAN
` [Qemu-devel] [PATCH 9/9] memory: Delete memory_region_big_endian
[Qemu-devel] [PATCH v4 1/4] block: Add zoned device model property
2019-08-23 19:20 UTC (2+ messages)
` [Qemu-devel] [PATCH v4 2/4] raw: Recognize zoned backing devices
[Qemu-devel] [PATCH 0/2] block: Let blockdev-create return 0 on success
2019-08-23 18:47 UTC (3+ messages)
` [Qemu-devel] [PATCH 1/2] "
` [Qemu-devel] [PATCH 2/2] iotests: Test blockdev-create for vpc
[Qemu-devel] [PATCH v5 00/30] riscv: sifive_u: Improve the emulation fidelity of sifive_u machine
2019-08-23 18:34 UTC (13+ messages)
` [Qemu-devel] [PATCH v5 05/30] riscv: hw: Change to use qemu_log_mask(LOG_GUEST_ERROR, ...) instead
` [Qemu-devel] [PATCH v5 06/30] riscv: hw: Remove the unnecessary include of target/riscv/cpu.h
` [Qemu-devel] [PATCH v5 15/30] riscv: hart: Add a "hartid-base" property to RISC-V hart array
` [Qemu-devel] [PATCH v5 16/30] riscv: sifive_u: Update hart configuration to reflect the real FU540 SoC
` [Qemu-devel] [PATCH v5 17/30] riscv: sifive_u: Set the minimum number of cpus to 2
[Qemu-devel] [PATCH v1 0/9] tcg: probe_write() refactorings and watchpoints
2019-08-23 18:25 UTC (20+ messages)
` [Qemu-devel] [PATCH v1 1/9] s390x/tcg: Use guest_addr_valid() instead of h2g_valid() in probe_write_access()
` [Qemu-devel] [PATCH v1 3/9] tcg: Factor out CONFIG_USER_ONLY probe_write() from s390x code
` [Qemu-devel] [PATCH v1 4/9] tcg: Enforce single page access in probe_write() for !CONFIG_USER_ONLY
` [Qemu-devel] [PATCH v1 6/9] hppa/tcg: Call probe_write() also for CONFIG_USER_ONLY
` [Qemu-devel] [PATCH v1 7/9] s390x/tcg: Pass a size to probe_write() in do_csst()
` [Qemu-devel] [PATCH v1 8/9] exec.c: Factor out core logic of check_watchpoint()
` [Qemu-devel] [PATCH v1 9/9] tcg: Check for watchpoints in probe_write()
[Qemu-devel] [PATCH] hostmem-file: fix pmem file size check
2019-08-23 18:14 UTC (2+ messages)
[Qemu-devel] [PATCH v2 0/2] Add virtio-fs (experimental)
2019-08-23 17:57 UTC (4+ messages)
` [Qemu-devel] [PATCH v2 1/2] virtio: add vhost-user-fs base device
` [Qemu-devel] [PATCH v2 2/2] virtio: add vhost-user-fs-pci device
` [Qemu-devel] [Virtio-fs] [PATCH v2 0/2] Add virtio-fs (experimental)
[Qemu-devel] [PATCH v2 00/68] target/arm: Convert aa32 base isa to decodetree
2019-08-23 17:53 UTC (29+ messages)
` [Qemu-devel] [PATCH v2 20/68] target/arm: Convert load/store (register, immediate, literal)
` [Qemu-devel] [PATCH v2 21/68] target/arm: Convert Synchronization primitives
` [Qemu-devel] [PATCH v2 22/68] target/arm: Convert USAD8, USADA8, SBFX, UBFX, BFC, BFI, UDF
` [Qemu-devel] [PATCH v2 23/68] target/arm: Convert Parallel addition and subtraction
` [Qemu-devel] [PATCH v2 24/68] target/arm: Convert Packing, unpacking, saturation, and reversal
` [Qemu-devel] [PATCH v2 25/68] target/arm: Convert Signed multiply, signed and unsigned divide
` [Qemu-devel] [PATCH v2 26/68] target/arm: Convert MOVW, MOVT
` [Qemu-devel] [PATCH v2 27/68] target/arm: Convert LDM, STM
` [Qemu-devel] [PATCH v2 28/68] target/arm: Diagnose writeback register in list for LDM for v7
` [Qemu-devel] [PATCH v2 29/68] target/arm: Diagnose too few registers in list for LDM/STM
` [Qemu-devel] [PATCH v2 30/68] target/arm: Diagnose base == pc "
` [Qemu-devel] [PATCH v2 31/68] target/arm: Convert B, BL, BLX (immediate)
[Qemu-devel] [PATCH] block: posix: Always allocate the first block
2019-08-23 17:53 UTC (10+ messages)
[Qemu-devel] [PATCH 0/4] Record Python version and misc test/CI fixes
2019-08-23 17:44 UTC (10+ messages)
` [Qemu-devel] [PATCH 1/4] configure: keep track of Python version
[Qemu-devel] [PATCH v2 0/6] hw/arm: Use ARM_CPU_TYPE_NAME() and object_initialize_child()
2019-08-23 17:36 UTC (17+ messages)
` [Qemu-devel] [PATCH v2 1/6] hw/arm: Use ARM_CPU_TYPE_NAME() macro when appropriate
` [Qemu-devel] [PATCH v2 2/6] hw/arm: Use object_initialize_child for correct reference counting
` [Qemu-devel] [PATCH v2 3/6] hw/arm: Use sysbus_init_child_obj "
` [Qemu-devel] [PATCH v2 4/6] hw/arm/fsl-imx: Add the cpu as child of the SoC object
` [Qemu-devel] [PATCH v2 5/6] hw/dma/xilinx_axi: Use object_initialize_child for correct ref. counting
` [Qemu-devel] [PATCH v2 6/6] hw/net/xilinx_axi: "
[Qemu-devel] [PATCH 0/4] Support disabling TCG on ARM (part 2)
2019-08-23 17:14 UTC (9+ messages)
` [Qemu-devel] [PATCH 1/4] target/arm: Restrict pre-ARMv7 cpus to TCG
` [Qemu-devel] [PATCH 2/4] target/arm: Restrict R and M profiles "
` [Qemu-devel] [PATCH 3/4] RFC target/arm: Do not build pre-ARMv7 cpus when using KVM
` [Qemu-devel] [PATCH 4/4] RFC target/arm: Do not build A/M-profile "
[Qemu-devel] [PATCH 0/1] Handle /proc/self/exe in execve
2019-08-23 16:58 UTC (3+ messages)
` [Qemu-devel] [PATCH 1/1] linux-user: Handle /proc/self/exe in syscall execve
[Qemu-devel] [PATCH] linux-user: add memfd_create
2019-08-23 16:48 UTC (5+ messages)
` [Qemu-devel] [PATCH v3] "
[Qemu-devel] libvhost-user: Fix the VHOST_USER_PROTOCOL_F_SLAVE_SEND_FD check
2019-08-23 16:32 UTC (6+ messages)
[Qemu-devel] [PATCH] linux-user: erroneous fd_trans_unregister call
2019-08-23 16:28 UTC (2+ messages)
[Qemu-devel] [RFC PATCH] migration/postcopy: skip compression when postcopy is active
2019-08-23 16:27 UTC (2+ messages)
[Qemu-devel] [PATCH] migrtion: define MigrationState/MigrationIncomingState.state as MigrationStatus
2019-08-23 16:21 UTC (6+ messages)
[Qemu-devel] [PATCH v2 00/12] block: qiov_offset parameter for io
2019-08-23 16:21 UTC (6+ messages)
[Qemu-devel] Running u-boot on raspi2
2019-08-23 16:08 UTC (2+ messages)
[Qemu-devel] [RFC PATCH] migration/postcopy: enable compress with postcopy
2019-08-23 15:59 UTC (2+ messages)
[Qemu-devel] [PATCH] Add support for ethtool via TARGET_SIOCETHTOOL ioctls
2019-08-23 15:52 UTC (3+ messages)
` [Qemu-devel] [PATCH v2] linux-user: Add support for SIOCETHTOOL ioctl
[Qemu-devel] [PATCH v4 0/7] RISC-V: Hypervisor prep work part 2
2019-08-23 15:44 UTC (10+ messages)
` [Qemu-devel] [PATCH v4 1/7] target/riscv: Don't set write permissions on dirty PTEs
` [Qemu-devel] [PATCH v4 2/7] riscv: plic: Remove unused interrupt functions
` [Qemu-devel] [PATCH v4 3/7] target/riscv: Create function to test if FP is enabled
` [Qemu-devel] [PATCH v4 4/7] target/riscv: Update the Hypervisor CSRs to v0.4
` [Qemu-devel] [PATCH v4 5/7] target/riscv: Use both register name and ABI name
` [Qemu-devel] [PATCH v4 6/7] target/riscv: Fix mstatus dirty mask
` [Qemu-devel] [PATCH v4 7/7] target/riscv: Use TB_FLAGS_MSTATUS_FS for floating point
[Qemu-devel] [PATCH] contrib/gitdm: Add RT-RK to the domain-map
2019-08-23 15:44 UTC (2+ messages)
[Qemu-devel] [PATCH 1/2] linux-user: remove useless variable
2019-08-23 15:31 UTC (2+ messages)
[Qemu-devel] [PATCH v5 0/6] Allow Valgrind checking all QEMU processes
2019-08-23 15:27 UTC (4+ messages)
` [Qemu-devel] [PATCH v5 6/6] iotests: extend sleeping time under Valgrind
` [Qemu-devel] [Qemu-block] "
[Qemu-devel] CPU hotplug using SMM with QEMU+OVMF
2019-08-23 15:25 UTC (26+ messages)
` [Qemu-devel] [edk2-devel] "
` [Qemu-devel] [edk2-rfc] "
[Qemu-devel] [PATCH] linux-user: Add AT_HWCAP2 for aarch64-linux-user
2019-08-23 15:34 UTC (2+ messages)
[Qemu-devel] [PATCH v2 0/2] Add dbus-vmstate
2019-08-23 15:24 UTC (14+ messages)
[Qemu-devel] [PATCH v3 0/7] RISC-V: Hypervisor prep work part 2
2019-08-23 15:18 UTC (3+ messages)
` [Qemu-devel] [PATCH v3 7/7] target/riscv: Convert mip to target_ulong
[Qemu-devel] [PATCH 0/2] slirp: Fix heap buffer overflow during packet reassembly (CVE-2019-14378)
2019-08-23 15:15 UTC (4+ messages)
` [Qemu-devel] [PATCH 1/2] Do not reassemble fragments pointing outside of the original payload
` [Qemu-devel] [Slirp] "
[Qemu-devel] [PULL 0/7] First batch of s390x changes for 4.2
2019-08-23 15:11 UTC (2+ messages)
[Qemu-devel] [PATCH 0/2] virtiofsd: use "fuse_log.h" APIs instead of <err.h>
2019-08-23 15:09 UTC (3+ messages)
` [Qemu-devel] [PATCH 1/2] virtiofsd: replace warn(3) and warnx(3) with fuse_warning()
page: next (older) | prev (newer) | latest
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).