From: Stefano Garzarella <sgarzare@redhat.com>
To: Stefan Hajnoczi <stefanha@redhat.com>
Cc: qemu-devel@nongnu.org, qemu-block@nongnu.org,
Hanna Reitz <hreitz@redhat.com>,
jjongsma@redhat.com, Kevin Wolf <kwolf@redhat.com>,
Eric Blake <eblake@redhat.com>,
Markus Armbruster <armbru@redhat.com>
Subject: Re: [PATCH] block/blkio: add 'fd' option to virtio-blk-vhost-vdpa driver
Date: Thu, 4 May 2023 09:38:33 +0200 [thread overview]
Message-ID: <CAGxU2F4UrTcmatM96MiH-3JwOkZhXJNu5yM7+WH28BS6+Z5f5Q@mail.gmail.com> (raw)
In-Reply-To: <20230503132618.GD757667@fedora>
On Wed, May 3, 2023 at 5:57 PM Stefan Hajnoczi <stefanha@redhat.com> wrote:
>
> On Wed, May 03, 2023 at 11:15:56AM +0200, Stefano Garzarella wrote:
> > On Tue, May 02, 2023 at 03:02:32PM -0400, Stefan Hajnoczi wrote:
> > > On Tue, May 02, 2023 at 04:50:50PM +0200, Stefano Garzarella wrote:
> > > > The virtio-blk-vhost-vdpa driver in libblkio 1.3.0 supports the new
> > > > 'fd' property. Let's expose this to the user, so the management layer
> > > > can pass the file descriptor of an already opened vhost-vdpa character
> > > > device. This is useful especially when the device can only be accessed
> > > > with certain privileges.
> > > >
> > > > Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
> > > > ---
> > > >
> > > > Notes:
> > > > As an alternative we could support passing `/dev/fdset/N` via 'path',
> > > > always opening the path with qemu_open() and passing the fd to the
> > > > libblkio driver.
> > > > I preferred to add a new parameter though, because the code is
> > > > simpler without changing how path works (alternatively we should check
> > > > first if fd is supported by the driver or not).
> > > >
> > > > What do you think?
> > >
> > > I think the approach in this patch is fine.
> > >
> > > >
> > > > Thanks,
> > > > Stefano
> > > >
> > > > qapi/block-core.json | 6 +++++-
> > > > block/blkio.c | 45 +++++++++++++++++++++++++++++++++++++++++++-
> > > > 2 files changed, 49 insertions(+), 2 deletions(-)
> > > >
> > > > diff --git a/qapi/block-core.json b/qapi/block-core.json
> > > > index b57978957f..9f70777d49 100644
> > > > --- a/qapi/block-core.json
> > > > +++ b/qapi/block-core.json
> > > > @@ -3841,10 +3841,14 @@
> > > > #
> > > > # @path: path to the vhost-vdpa character device.
> > > > #
> > > > +# @fd: file descriptor of an already opened vhost-vdpa character device.
> > > > +# (Since 8.1)
> > > > +#
> > > > # Since: 7.2
> > > > ##
> > > > { 'struct': 'BlockdevOptionsVirtioBlkVhostVdpa',
> > > > - 'data': { 'path': 'str' },
> > > > + 'data': { '*path': 'str',
> > > > + '*fd': 'str' },
> > > > 'if': 'CONFIG_BLKIO' }
> > > >
> > > > ##
> > > > diff --git a/block/blkio.c b/block/blkio.c
> > > > index 0cdc99a729..98394b5745 100644
> > > > --- a/block/blkio.c
> > > > +++ b/block/blkio.c
> > > > @@ -694,6 +694,49 @@ static int blkio_virtio_blk_common_open(BlockDriverState *bs,
> > > > return 0;
> > > > }
> > > >
> > > > +static int blkio_virtio_blk_vhost_vdpa_open(BlockDriverState *bs,
> > > > + QDict *options, int flags, Error **errp)
> > > > +{
> > > > + const char *path = qdict_get_try_str(options, "path");
> > > > + const char *fd_str = qdict_get_try_str(options, "fd");
> > > > + BDRVBlkioState *s = bs->opaque;
> > > > + int ret;
> > > > +
> > > > + if (path && fd_str) {
> > > > + error_setg(errp, "'path' and 'fd' options are mutually exclusive");
> > > > + return -EINVAL;
> > > > + }
> > > > +
> > > > + if (!path && !fd_str) {
> > > > + error_setg(errp, "none of 'path' or 'fd' options was specified");
> > > > + return -EINVAL;
> > > > + }
> > > > +
> > > > + if (path) {
> > > > + ret = blkio_set_str(s->blkio, "path", path);
> > > > + qdict_del(options, "path");
> > > > + if (ret < 0) {
> > > > + error_setg_errno(errp, -ret, "failed to set path: %s",
> > > > + blkio_get_error_msg());
> > > > + return ret;
> > > > + }
> > > > + } else {
> > > > + ret = blkio_set_str(s->blkio, "fd", fd_str);
> > >
> > > monitor_fd_param() is used by vhost-net, vhost-vsock, vhost-scsi, etc.
> > >
> > > I think QEMU should parse the fd string and resolve it to a file
> > > descriptor so the fd passing syntax matches the other vhost devices.
> >
> > Okay, but I have a linker issue if I use monitor_fd_param().
> > IIUC because blkio is built as a module, so what about adding
> > qemu_fd_param() in libqemuutil?
>
> Modules can access any extern function in QEMU so I don't think there is
> a fundamental limitation there.
>
> Maybe it's related to the dependencies between the blkio module and
> monitor/ code. monitor_get_fd_param() is in softmmu_ss, which block
> drivers don't directly depend on AFAICT.
Yep, I think this is the case.
>
> >
> > I mean something like this:
> >
> > diff --git a/include/qemu/osdep.h b/include/qemu/osdep.h
> > index 9eff0be95b..87360c983a 100644
> > --- a/include/qemu/osdep.h
> > +++ b/include/qemu/osdep.h
> > @@ -568,6 +568,7 @@ int qemu_lock_fd(int fd, int64_t start, int64_t len, bool exclusive);
> > int qemu_unlock_fd(int fd, int64_t start, int64_t len);
> > int qemu_lock_fd_test(int fd, int64_t start, int64_t len, bool exclusive);
> > bool qemu_has_ofd_lock(void);
> > +int qemu_fd_param(const char *fdname, Error **errp);
> > #endif
> >
> > #if defined(__HAIKU__) && defined(__i386__)
> > diff --git a/util/osdep.c b/util/osdep.c
> > index e996c4744a..ed0832810b 100644
> > --- a/util/osdep.c
> > +++ b/util/osdep.c
> > @@ -234,6 +234,11 @@ bool qemu_has_ofd_lock(void)
> > #endif
> > }
> >
> > +int qemu_fd_param(const char *fdname, Error **errp)
> > +{
> > + return monitor_fd_param(monitor_cur(), fdname, errp);
> > +}
>
> I'm not sure. If it works with modules enabled/disabled,
> qemu-io/qemu-img/etc, and qemu-user then I guess this solution is okay.
It seems to work, and I think it's easier than introducing the
dependency between the blkio module and monitor/ code.
Something similar has already been done with monitor_get_fd().
Anyway I'll send v2 by adding that patch and we can discuss it there.
Thanks for the advice,
Stefano
next prev parent reply other threads:[~2023-05-04 7:39 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-05-02 14:50 [PATCH] block/blkio: add 'fd' option to virtio-blk-vhost-vdpa driver Stefano Garzarella
2023-05-02 19:02 ` Stefan Hajnoczi
2023-05-03 9:15 ` Stefano Garzarella
2023-05-03 13:26 ` Stefan Hajnoczi
2023-05-04 7:38 ` Stefano Garzarella [this message]
2023-05-04 8:46 ` Stefano Garzarella
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CAGxU2F4UrTcmatM96MiH-3JwOkZhXJNu5yM7+WH28BS6+Z5f5Q@mail.gmail.com \
--to=sgarzare@redhat.com \
--cc=armbru@redhat.com \
--cc=eblake@redhat.com \
--cc=hreitz@redhat.com \
--cc=jjongsma@redhat.com \
--cc=kwolf@redhat.com \
--cc=qemu-block@nongnu.org \
--cc=qemu-devel@nongnu.org \
--cc=stefanha@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).