qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Li Qiang <liq3ea@gmail.com>
To: P J P <ppandit@redhat.com>
Cc: "Prasad J Pandit" <pjp@fedoraproject.org>,
	"Stefan Hajnoczi" <stefanha@gmail.com>,
	"Jason Wang" <jasowang@redhat.com>,
	"Qemu Developers" <qemu-devel@nongnu.org>,
	"Philippe Mathieu-Daudé" <philmd@redhat.com>,
	"Li Qiang" <pangpei.lq@antfin.com>,
	"Sven Schnelle" <svens@stackframe.org>,
	"Ziming Zhang" <ezrakiez@gmail.com>
Subject: Re: [PATCH v7] net: tulip: check frame size and r/w data length
Date: Thu, 26 Mar 2020 19:11:17 +0800	[thread overview]
Message-ID: <CAKXe6SLY4bXoKmqqwghmXsWA9vF0jgiia7-E23+Sq9cA11pcHg@mail.gmail.com> (raw)
In-Reply-To: <20200324172722.32082-1-ppandit@redhat.com>

[-- Attachment #1: Type: text/plain, Size: 5377 bytes --]

P J P <ppandit@redhat.com> 于2020年3月25日周三 上午1:31写道:

> From: Prasad J Pandit <pjp@fedoraproject.org>
>
> Tulip network driver while copying tx/rx buffers does not check
> frame size against r/w data length. This may lead to OOB buffer
> access. Add check to avoid it.
>
> Limit iterations over descriptors to avoid potential infinite
> loop issue in tulip_xmit_list_update.
>
> Reported-by: Li Qiang <pangpei.lq@antfin.com>
> Reported-by: Ziming Zhang <ezrakiez@gmail.com>
> Reported-by: Jason Wang <jasowang@redhat.com>
> Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
>


Tested-by: Li Qiang <liq3ea@gmail.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>

Thanks,
Li Qiang



> ---
>  hw/net/tulip.c | 36 +++++++++++++++++++++++++++---------
>  1 file changed, 27 insertions(+), 9 deletions(-)
>
> Update v7: fix length check expression to replace '>=' with '>'
>   -> https://lists.gnu.org/archive/html/qemu-devel/2020-03/msg07160.html
>
> diff --git a/hw/net/tulip.c b/hw/net/tulip.c
> index cfac2719d3..1295f51d07 100644
> --- a/hw/net/tulip.c
> +++ b/hw/net/tulip.c
> @@ -170,6 +170,10 @@ static void tulip_copy_rx_bytes(TULIPState *s, struct
> tulip_descriptor *desc)
>          } else {
>              len = s->rx_frame_len;
>          }
> +
> +        if (s->rx_frame_len + len > sizeof(s->rx_frame)) {
> +            return;
> +        }
>          pci_dma_write(&s->dev, desc->buf_addr1, s->rx_frame +
>              (s->rx_frame_size - s->rx_frame_len), len);
>          s->rx_frame_len -= len;
> @@ -181,6 +185,10 @@ static void tulip_copy_rx_bytes(TULIPState *s, struct
> tulip_descriptor *desc)
>          } else {
>              len = s->rx_frame_len;
>          }
> +
> +        if (s->rx_frame_len + len > sizeof(s->rx_frame)) {
> +            return;
> +        }
>          pci_dma_write(&s->dev, desc->buf_addr2, s->rx_frame +
>              (s->rx_frame_size - s->rx_frame_len), len);
>          s->rx_frame_len -= len;
> @@ -227,7 +235,8 @@ static ssize_t tulip_receive(TULIPState *s, const
> uint8_t *buf, size_t size)
>
>      trace_tulip_receive(buf, size);
>
> -    if (size < 14 || size > 2048 || s->rx_frame_len ||
> tulip_rx_stopped(s)) {
> +    if (size < 14 || size > sizeof(s->rx_frame) - 4
> +        || s->rx_frame_len || tulip_rx_stopped(s)) {
>          return 0;
>      }
>
> @@ -275,7 +284,6 @@ static ssize_t tulip_receive_nc(NetClientState *nc,
>      return tulip_receive(qemu_get_nic_opaque(nc), buf, size);
>  }
>
> -
>  static NetClientInfo net_tulip_info = {
>      .type = NET_CLIENT_DRIVER_NIC,
>      .size = sizeof(NICState),
> @@ -558,7 +566,7 @@ static void tulip_tx(TULIPState *s, struct
> tulip_descriptor *desc)
>          if ((s->csr[6] >> CSR6_OM_SHIFT) & CSR6_OM_MASK) {
>              /* Internal or external Loopback */
>              tulip_receive(s, s->tx_frame, s->tx_frame_len);
> -        } else {
> +        } else if (s->tx_frame_len <= sizeof(s->tx_frame)) {
>              qemu_send_packet(qemu_get_queue(s->nic),
>                  s->tx_frame, s->tx_frame_len);
>          }
> @@ -570,23 +578,31 @@ static void tulip_tx(TULIPState *s, struct
> tulip_descriptor *desc)
>      }
>  }
>
> -static void tulip_copy_tx_buffers(TULIPState *s, struct tulip_descriptor
> *desc)
> +static int tulip_copy_tx_buffers(TULIPState *s, struct tulip_descriptor
> *desc)
>  {
>      int len1 = (desc->control >> TDES1_BUF1_SIZE_SHIFT) &
> TDES1_BUF1_SIZE_MASK;
>      int len2 = (desc->control >> TDES1_BUF2_SIZE_SHIFT) &
> TDES1_BUF2_SIZE_MASK;
>
> +    if (s->tx_frame_len + len1 > sizeof(s->tx_frame)) {
> +        return -1;
> +    }
>      if (len1) {
>          pci_dma_read(&s->dev, desc->buf_addr1,
>              s->tx_frame + s->tx_frame_len, len1);
>          s->tx_frame_len += len1;
>      }
>
> +    if (s->tx_frame_len + len2 > sizeof(s->tx_frame)) {
> +        return -1;
> +    }
>      if (len2) {
>          pci_dma_read(&s->dev, desc->buf_addr2,
>              s->tx_frame + s->tx_frame_len, len2);
>          s->tx_frame_len += len2;
>      }
>      desc->status = (len1 + len2) ? 0 : 0x7fffffff;
> +
> +    return 0;
>  }
>
>  static void tulip_setup_filter_addr(TULIPState *s, uint8_t *buf, int n)
> @@ -651,13 +667,15 @@ static uint32_t tulip_ts(TULIPState *s)
>
>  static void tulip_xmit_list_update(TULIPState *s)
>  {
> +#define TULIP_DESC_MAX 128
> +    uint8_t i = 0;
>      struct tulip_descriptor desc;
>
>      if (tulip_ts(s) != CSR5_TS_SUSPENDED) {
>          return;
>      }
>
> -    for (;;) {
> +    for (i = 0; i < TULIP_DESC_MAX; i++) {
>          tulip_desc_read(s, s->current_tx_desc, &desc);
>          tulip_dump_tx_descriptor(s, &desc);
>
> @@ -675,10 +693,10 @@ static void tulip_xmit_list_update(TULIPState *s)
>                  s->tx_frame_len = 0;
>              }
>
> -            tulip_copy_tx_buffers(s, &desc);
> -
> -            if (desc.control & TDES1_LS) {
> -                tulip_tx(s, &desc);
> +            if (!tulip_copy_tx_buffers(s, &desc)) {
> +                if (desc.control & TDES1_LS) {
> +                    tulip_tx(s, &desc);
> +                }
>              }
>          }
>          tulip_desc_write(s, s->current_tx_desc, &desc);
> --
> 2.25.1
>
>
>

[-- Attachment #2: Type: text/html, Size: 7372 bytes --]

  reply	other threads:[~2020-03-26 11:12 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-03-24 17:27 [PATCH v7] net: tulip: check frame size and r/w data length P J P
2020-03-26 11:11 ` Li Qiang [this message]
2020-03-27  1:56   ` Jason Wang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=CAKXe6SLY4bXoKmqqwghmXsWA9vF0jgiia7-E23+Sq9cA11pcHg@mail.gmail.com \
    --to=liq3ea@gmail.com \
    --cc=ezrakiez@gmail.com \
    --cc=jasowang@redhat.com \
    --cc=pangpei.lq@antfin.com \
    --cc=philmd@redhat.com \
    --cc=pjp@fedoraproject.org \
    --cc=ppandit@redhat.com \
    --cc=qemu-devel@nongnu.org \
    --cc=stefanha@gmail.com \
    --cc=svens@stackframe.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).