qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Alistair Francis <alistair23@gmail.com>
To: wangjunqiang <wangjunqiang@iscas.ac.cn>
Cc: liweiwei@iscas.ac.cn, "open list:RISC-V" <qemu-riscv@nongnu.org>,
	Bin Meng <bin.meng@windriver.com>,
	"qemu-devel@nongnu.org Developers" <qemu-devel@nongnu.org>,
	Alistair Francis <Alistair.Francis@wdc.com>,
	alapha23@gmail.com, Palmer Dabbelt <palmer@dabbelt.com>
Subject: Re: [RFC PATCH 2/5] hw/intc: Add Nuclei ECLIC device
Date: Mon, 10 May 2021 12:20:37 +1000	[thread overview]
Message-ID: <CAKmqyKPVYuESf0TQM8M-KE-72PftMeNCfmQLdEj4Siy9TZxuBA@mail.gmail.com> (raw)
In-Reply-To: <20210507081654.11056-3-wangjunqiang@iscas.ac.cn>

On Fri, May 7, 2021 at 11:24 PM wangjunqiang <wangjunqiang@iscas.ac.cn> wrote:
>
> This patch provides an implementation of Nuclei ECLIC Device.
> Nuclei processor core have been equipped with an Enhanced Core Local
> Interrupt Controller (ECLIC), which is optimized based on the RISC-V
> standard CLIC, to manage all interrupt sources.
>
> https://doc.nucleisys.com/nuclei_spec/isa/eclic.html

Hello,

There are patches on the QEMU list adding support for the CLIC. How
different is the ECLIC from the CLIC? Could you use the CLIC as a
starting point instead of implementing a new interrupt controller?

Alistair

> ---
>  hw/intc/Kconfig                |   3 +
>  hw/intc/meson.build            |   1 +
>  hw/intc/nuclei_eclic.c         | 437 +++++++++++++++++++++++++++++++++
>  include/hw/intc/nuclei_eclic.h | 115 +++++++++
>  4 files changed, 556 insertions(+)
>  create mode 100644 hw/intc/nuclei_eclic.c
>  create mode 100644 include/hw/intc/nuclei_eclic.h
>
> diff --git a/hw/intc/Kconfig b/hw/intc/Kconfig
> index f4694088a4..eab30f6ffd 100644
> --- a/hw/intc/Kconfig
> +++ b/hw/intc/Kconfig
> @@ -73,3 +73,6 @@ config GOLDFISH_PIC
>
>  config M68K_IRQC
>      bool
> +
> +config NUCLEI_ECLIC
> +    bool
> diff --git a/hw/intc/meson.build b/hw/intc/meson.build
> index 1c299039f6..7577ba69d2 100644
> --- a/hw/intc/meson.build
> +++ b/hw/intc/meson.build
> @@ -50,6 +50,7 @@ specific_ss.add(when: 'CONFIG_S390_FLIC_KVM', if_true: files('s390_flic_kvm.c'))
>  specific_ss.add(when: 'CONFIG_SH_INTC', if_true: files('sh_intc.c'))
>  specific_ss.add(when: 'CONFIG_SIFIVE_CLINT', if_true: files('sifive_clint.c'))
>  specific_ss.add(when: 'CONFIG_SIFIVE_PLIC', if_true: files('sifive_plic.c'))
> +specific_ss.add(when: 'CONFIG_NUCLEI_ECLIC', if_true: files('nuclei_eclic.c'))
>  specific_ss.add(when: 'CONFIG_XICS', if_true: files('xics.c'))
>  specific_ss.add(when: ['CONFIG_KVM', 'CONFIG_XICS'],
>                 if_true: files('xics_kvm.c'))
> diff --git a/hw/intc/nuclei_eclic.c b/hw/intc/nuclei_eclic.c
> new file mode 100644
> index 0000000000..52de83cb1d
> --- /dev/null
> +++ b/hw/intc/nuclei_eclic.c
> @@ -0,0 +1,437 @@
> +/*
> + * NUCLEI ECLIC(Enhanced Core Local Interrupt Controller)
> + *
> + * Copyright (c) 2020 Gao ZhiYuan <alapha23@gmail.com>
> + * Copyright (c) 2020-2021 PLCT Lab.All rights reserved.
> + *
> + * This provides a parameterizable interrupt controller based on NucLei's ECLIC.
> + *
> + * This program is free software: you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation, either version 3 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + *  You should have received a copy of the GNU General Public License
> + *  along with this program.  If not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +#include "qemu/osdep.h"
> +#include "qemu/log.h"
> +#include "qemu/module.h"
> +#include "qemu/error-report.h"
> +#include "hw/sysbus.h"
> +#include "hw/pci/msi.h"
> +#include "hw/boards.h"
> +#include "hw/qdev-properties.h"
> +#include "target/riscv/cpu.h"
> +#include "sysemu/sysemu.h"
> +#include "hw/intc/nuclei_eclic.h"
> +#include "qapi/error.h"
> +
> +#define RISCV_DEBUG_ECLIC 0
> +
> +static void riscv_cpu_eclic_interrupt(RISCVCPU *cpu, int exccode)
> +{
> +    CPURISCVState *env = &cpu->env;
> +    bool locked = false;
> +
> +    env->exccode = exccode;
> +
> +    if (!qemu_mutex_iothread_locked()) {
> +        locked = true;
> +        qemu_mutex_lock_iothread();
> +    }
> +
> +    if (exccode != -1) {
> +        env->irq_pending = true;
> +        cpu_interrupt(CPU(cpu), CPU_INTERRUPT_ECLIC);
> +    } else {
> +        env->irq_pending = false;
> +        cpu_reset_interrupt(CPU(cpu), CPU_INTERRUPT_ECLIC);
> +    }
> +
> +    if (locked) {
> +        qemu_mutex_unlock_iothread();
> +    }
> +}
> +
> +static int level_compare(NucLeiECLICState *eclic,
> +                         ECLICPendingInterrupt *irq1,
> +                         ECLICPendingInterrupt *irq2)
> +{
> +    if (irq1->level == irq2->level) {
> +        if (irq1->prio == irq2->prio) {
> +            if (irq1->irq >= irq2->irq) {
> +                return 0;
> +            } else {
> +                return 1;
> +            }
> +        } else if (irq1->prio > irq2->level) {
> +            return 0;
> +        } else {
> +            return 1;
> +        }
> +    } else if (irq1->level > irq2->level) {
> +        return 0;
> +    } else {
> +        return 1;
> +    }
> +}
> +
> +static void nuclei_eclic_next_interrupt(void *eclic_ptr)
> +{
> +    RISCVCPU *cpu = RISCV_CPU(qemu_get_cpu(0));
> +    CPURISCVState *env = &cpu->env;
> +    NucLeiECLICState *eclic = (NucLeiECLICState *)eclic_ptr;
> +    ECLICPendingInterrupt *active;
> +    target_ulong mil;
> +    int shv;
> +
> +    QLIST_FOREACH(active, &eclic->pending_list, next)
> +    {
> +        if (active->enable) {
> +            mil = get_field(env->mintstatus, MINTSTATUS_MIL);
> +            if (active->level >= eclic->mth && active->level > mil) {
> +                shv = eclic->clicintattr[active->irq] & 0x1;
> +                eclic->active_count++;
> +                riscv_cpu_eclic_interrupt(cpu,
> +                                          (active->irq & 0xFFF) | (shv << 12) | (active->level << 13));
> +                return;
> +            }
> +        }
> +    }
> +}
> +
> +static void nuclei_eclic_update_intmth(NucLeiECLICState *eclic,
> +                                       int irq, int mth)
> +{
> +    eclic->mth = mth;
> +    nuclei_eclic_next_interrupt(eclic);
> +}
> +
> +static void update_eclic_int_info(NucLeiECLICState *eclic, int irq)
> +{
> +    int level_width = (eclic->cliccfg >> 1) & 0xF;
> +    if (level_width > CLICINTCTLBITS) {
> +        level_width = CLICINTCTLBITS;
> +    }
> +    int prio_width = CLICINTCTLBITS - level_width;
> +
> +    if (level_width == 0) {
> +        eclic->clicintlist[irq].level = 255;
> +    } else {
> +        eclic->clicintlist[irq].level = ((
> +                                             (eclic->clicintctl[irq] >> (8 - level_width)) &
> +                                             ~((char)0x80 >> (8 - level_width)))
> +                                         << (8 - level_width)) |
> +                                        (0xff >> level_width);
> +    }
> +
> +    if (prio_width == 0) {
> +        eclic->clicintlist[irq].prio = 0;
> +    } else {
> +        eclic->clicintlist[irq].prio =
> +            (eclic->clicintctl[irq] >> (8 - level_width)) &
> +            ~(0x80 >> (8 - prio_width));
> +    }
> +
> +    eclic->clicintlist[irq].enable = eclic->clicintie[irq] & 0x1;
> +    eclic->clicintlist[irq].trigger = (eclic->clicintattr[irq] >> 1) & 0x3;
> +}
> +
> +static void eclic_remove_pending_list(NucLeiECLICState *eclic, int irq)
> +{
> +    QLIST_REMOVE(&eclic->clicintlist[irq], next);
> +}
> +
> +static void eclic_insert_pending_list(NucLeiECLICState *eclic, int irq)
> +{
> +    ECLICPendingInterrupt *node;
> +    if (QLIST_EMPTY(&eclic->pending_list)) {
> +        QLIST_INSERT_HEAD(&eclic->pending_list, &eclic->clicintlist[irq], next);
> +    } else {
> +        QLIST_FOREACH(node, &eclic->pending_list, next)
> +        {
> +            if (level_compare(eclic, node, &eclic->clicintlist[irq])) {
> +                QLIST_INSERT_BEFORE(node, &eclic->clicintlist[irq], next);
> +                break;
> +            } else if (node->next.le_next == NULL) {
> +                QLIST_INSERT_AFTER(node, &eclic->clicintlist[irq], next);
> +                break;
> +            }
> +        }
> +    }
> +}
> +
> +static void nuclei_eclic_update_intip(NucLeiECLICState *eclic, int irq, int new_intip)
> +{
> +
> +    int old_intip = eclic->clicintlist[irq].sig;
> +    int trigger = (eclic->clicintattr[irq] >> 1) & 0x3;
> +    if (((trigger == 0) && new_intip) ||
> +        ((trigger == 1) && !old_intip && new_intip) ||
> +        ((trigger == 3) && old_intip && !new_intip)) {
> +        eclic->clicintip[irq] = 1;
> +        eclic->clicintlist[irq].sig = new_intip;
> +        eclic_insert_pending_list(eclic, irq);
> +    } else {
> +        if (eclic->clicintip[irq]) {
> +            eclic_remove_pending_list(eclic, irq);
> +        }
> +        eclic->clicintip[irq] = 0;
> +        eclic->clicintlist[irq].sig = new_intip;
> +    }
> +
> +    nuclei_eclic_next_interrupt(eclic);
> +}
> +
> +static void nuclei_eclic_update_intie(NucLeiECLICState *eclic,
> +                                      int irq, int new_intie)
> +{
> +    eclic->clicintie[irq] = new_intie;
> +    update_eclic_int_info(eclic, irq);
> +    nuclei_eclic_next_interrupt(eclic);
> +}
> +
> +static void nuclei_eclic_update_intattr(NucLeiECLICState *eclic,
> +                                        int irq, int new_intattr)
> +{
> +    eclic->clicintattr[irq] = new_intattr;
> +    update_eclic_int_info(eclic, irq);
> +    nuclei_eclic_next_interrupt(eclic);
> +}
> +
> +static void nuclei_eclic_update_intctl(NucLeiECLICState *eclic,
> +                                       int irq, int new_intctl)
> +{
> +    eclic->clicintctl[irq] = new_intctl;
> +    update_eclic_int_info(eclic, irq);
> +    nuclei_eclic_next_interrupt(eclic);
> +}
> +
> +qemu_irq nuclei_eclic_get_irq(DeviceState *dev, int irq)
> +{
> +    NucLeiECLICState *eclic = NUCLEI_ECLIC(dev);
> +    return eclic->irqs[irq];
> +}
> +
> +static uint64_t nuclei_eclic_read(void *opaque, hwaddr offset, unsigned size)
> +{
> +    NucLeiECLICState *eclic = NUCLEI_ECLIC(opaque);
> +    uint64_t value = 0;
> +    uint32_t id = 0;
> +    if (offset >= NUCLEI_ECLIC_REG_CLICINTIP_BASE) {
> +        if ((offset - 0x1000) % 4 == 0) {
> +            id = (offset - 0x1000) / 4;
> +        } else if ((offset - 0x1001) % 4 == 0) {
> +            id = (offset - 0x1001) / 4;
> +        } else if ((offset - 0x1002) % 4 == 0) {
> +            id = (offset - 0x1002) / 4;
> +        } else if ((offset - 0x1003) % 4 == 0) {
> +            id = (offset - 0x1003) / 4;
> +        }
> +        offset = offset - 4 * id;
> +    }
> +
> +    switch (offset) {
> +    case NUCLEI_ECLIC_REG_CLICCFG:
> +        value = eclic->cliccfg & 0xFF;
> +        break;
> +    case NUCLEI_ECLIC_REG_CLICINFO:
> +        value = (CLICINTCTLBITS << 21) & 0xFFFFFFFF;
> +        break;
> +    case NUCLEI_ECLIC_REG_MTH:
> +        value = eclic->mth & 0xFF;
> +        break;
> +    case NUCLEI_ECLIC_REG_CLICINTIP_BASE:
> +        value = eclic->clicintip[id] & 0xFF;
> +        break;
> +    case NUCLEI_ECLIC_REG_CLICINTIE_BASE:
> +        value = eclic->clicintie[id] & 0xFF;
> +        break;
> +    case NUCLEI_ECLIC_REG_CLICINTATTR_BASE:
> +        value = eclic->clicintattr[id] & 0xFF;
> +        break;
> +    case NUCLEI_ECLIC_REG_CLICINTCTL_BASE:
> +        value = eclic->clicintctl[id] & 0xFF;
> +        break;
> +    default:
> +        break;
> +    }
> +
> +    return value;
> +}
> +
> +static void nuclei_eclic_write(void *opaque, hwaddr offset, uint64_t value,
> +                               unsigned size)
> +{
> +    NucLeiECLICState *eclic = NUCLEI_ECLIC(opaque);
> +    uint32_t id = 0;
> +    if (offset >= NUCLEI_ECLIC_REG_CLICINTIP_BASE) {
> +
> +        if ((offset - 0x1000) % 4 == 0) {
> +            id = (offset - 0x1000) / 4;
> +        } else if ((offset - 0x1001) % 4 == 0) {
> +            id = (offset - 0x1001) / 4;
> +        } else if ((offset - 0x1002) % 4 == 0) {
> +            id = (offset - 0x1002) / 4;
> +        } else if ((offset - 0x1003) % 4 == 0) {
> +            id = (offset - 0x1003) / 4;
> +        }
> +        offset = offset - 4 * id;
> +    }
> +    switch (offset) {
> +    case NUCLEI_ECLIC_REG_CLICCFG:
> +        eclic->cliccfg = value & 0xFF;
> +        for (id = 0; id < eclic->num_sources; id++) {
> +            update_eclic_int_info(eclic, id);
> +        }
> +        break;
> +    case NUCLEI_ECLIC_REG_MTH:
> +        nuclei_eclic_update_intmth(eclic, id, value & 0xFF);
> +        break;
> +    case NUCLEI_ECLIC_REG_CLICINTIP_BASE:
> +        if ((eclic->clicintlist[id].trigger & 0x1) != 0) {
> +            if ((eclic->clicintip[id] == 0) && (value & 0x1) == 1) {
> +                eclic->clicintip[id] = 1;
> +                eclic_insert_pending_list(eclic, id);
> +            } else if ((eclic->clicintip[id] == 1) && (value & 0x1) == 0) {
> +                eclic->clicintip[id] = 0;
> +                eclic_remove_pending_list(eclic, id);
> +            }
> +        }
> +        nuclei_eclic_next_interrupt(eclic);
> +        break;
> +    case NUCLEI_ECLIC_REG_CLICINTIE_BASE:
> +        nuclei_eclic_update_intie(eclic, id, value & 0xFF);
> +        break;
> +    case NUCLEI_ECLIC_REG_CLICINTATTR_BASE:
> +        nuclei_eclic_update_intattr(eclic, id, value & 0xFF);
> +        break;
> +    case NUCLEI_ECLIC_REG_CLICINTCTL_BASE:
> +        nuclei_eclic_update_intctl(eclic, id, value & 0xFF);
> +        break;
> +    default:
> +        break;
> +    }
> +}
> +
> +static const MemoryRegionOps nuclei_eclic_ops = {
> +    .read = nuclei_eclic_read,
> +    .write = nuclei_eclic_write,
> +    .endianness = DEVICE_LITTLE_ENDIAN,
> +};
> +
> +void riscv_cpu_eclic_clean_pending(void *eclic_ptr, int irq)
> +{
> +    NucLeiECLICState *eclic = (NucLeiECLICState *)eclic_ptr;
> +    if ((eclic->clicintlist[irq].trigger & 0x1) != 0 && irq >= 0) {
> +        eclic->clicintip[irq] = 0;
> +        eclic_remove_pending_list(eclic, irq);
> +    }
> +}
> +
> +void riscv_cpu_eclic_get_next_interrupt(void *eclic_ptr)
> +{
> +    NucLeiECLICState *eclic = (NucLeiECLICState *)eclic_ptr;
> +    nuclei_eclic_next_interrupt(eclic);
> +}
> +
> +
> +
> +static void nuclei_eclic_irq_request(void *opaque, int id, int new_intip)
> +{
> +    NucLeiECLICState *eclic = NUCLEI_ECLIC(opaque);
> +    nuclei_eclic_update_intip(eclic, id, new_intip);
> +}
> +
> +static void nuclei_eclic_realize(DeviceState *dev, Error **errp)
> +{
> +    NucLeiECLICState *eclic = NUCLEI_ECLIC(dev);
> +    int id;
> +
> +    memory_region_init_io(&eclic->mmio, OBJECT(dev), &nuclei_eclic_ops, eclic,
> +                          TYPE_NUCLEI_ECLIC, eclic->aperture_size);
> +    sysbus_init_mmio(SYS_BUS_DEVICE(dev), &eclic->mmio);
> +
> +    eclic->clicintip = g_new0(uint8_t, eclic->num_sources);
> +    eclic->clicintlist = g_new0(ECLICPendingInterrupt, eclic->num_sources);
> +    eclic->clicintie = g_new0(uint8_t, eclic->num_sources);
> +    eclic->clicintattr = g_new0(uint8_t, eclic->num_sources);
> +    eclic->clicintctl = g_new0(uint8_t, eclic->num_sources);
> +    eclic->irqs = g_new0(qemu_irq, eclic->num_sources);
> +    QLIST_INIT(&eclic->pending_list);
> +    for (id = 0; id < eclic->num_sources; id++) {
> +        eclic->clicintlist[id].irq = id;
> +        update_eclic_int_info(eclic, id);
> +    }
> +    eclic->active_count = 0;
> +
> +    /* Init ECLIC IRQ */
> +    eclic->irqs[Internal_SysTimerSW_IRQn] =
> +        qemu_allocate_irq(nuclei_eclic_irq_request,
> +                          eclic, Internal_SysTimerSW_IRQn);
> +    eclic->irqs[Internal_SysTimer_IRQn] =
> +        qemu_allocate_irq(nuclei_eclic_irq_request,
> +                          eclic, Internal_SysTimer_IRQn);
> +
> +    for (id = Internal_Reserved_Max_IRQn; id < eclic->num_sources; id++) {
> +        eclic->irqs[id] = qemu_allocate_irq(nuclei_eclic_irq_request,
> +                                            eclic, id);
> +    }
> +
> +    RISCVCPU *cpu = RISCV_CPU(qemu_get_cpu(0));
> +    cpu->env.eclic = eclic;
> +}
> +
> +static Property nuclei_eclic_properties[] = {
> +    DEFINE_PROP_UINT32("aperture-size", NucLeiECLICState, aperture_size, 0),
> +    DEFINE_PROP_UINT32("num-sources", NucLeiECLICState, num_sources, 0),
> +    DEFINE_PROP_END_OF_LIST(),
> +};
> +
> +static void nuclei_eclic_class_init(ObjectClass *klass, void *data)
> +{
> +    DeviceClass *dc = DEVICE_CLASS(klass);
> +
> +    device_class_set_props(dc, nuclei_eclic_properties);
> +    dc->realize = nuclei_eclic_realize;
> +}
> +
> +static const TypeInfo nuclei_eclic_info = {
> +    .name = TYPE_NUCLEI_ECLIC,
> +    .parent = TYPE_SYS_BUS_DEVICE,
> +    .instance_size = sizeof(NucLeiECLICState),
> +    .class_init = nuclei_eclic_class_init,
> +};
> +
> +static void nuclei_eclic_register_types(void)
> +{
> +    type_register_static(&nuclei_eclic_info);
> +}
> +
> +type_init(nuclei_eclic_register_types);
> +
> +void nuclei_eclic_systimer_cb(DeviceState *dev)
> +{
> +    NucLeiECLICState *eclic = NUCLEI_ECLIC(dev);
> +    nuclei_eclic_irq_request(eclic, Internal_SysTimer_IRQn, 1);
> +}
> +
> +DeviceState *nuclei_eclic_create(hwaddr addr,
> +                                 uint32_t aperture_size, uint32_t num_sources)
> +{
> +    DeviceState *dev = qdev_new(TYPE_NUCLEI_ECLIC);
> +
> +    qdev_prop_set_uint32(dev, "aperture-size", aperture_size);
> +    qdev_prop_set_uint32(dev, "num-sources", num_sources);
> +
> +    sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal);
> +    sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, addr);
> +    return dev;
> +}
> diff --git a/include/hw/intc/nuclei_eclic.h b/include/hw/intc/nuclei_eclic.h
> new file mode 100644
> index 0000000000..18b25485b9
> --- /dev/null
> +++ b/include/hw/intc/nuclei_eclic.h
> @@ -0,0 +1,115 @@
> +/*
> + * NUCLEI ECLIC (Enhanced Core Local Interrupt Controller) interface
> + *
> + * Copyright (c) 2020 Gao ZhiYuan <alapha23@gmail.com>
> + * Copyright (c) 2020-2021 PLCT Lab.All rights reserved.
> + *
> + * This provides a parameterizable interrupt controller based on NucLei's ECLIC.
> + *
> + * This program is free software: you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation, either version 3 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + *  You should have received a copy of the GNU General Public License
> + *  along with this program.  If not, see <http://www.gnu.org/licenses/>.
> + */
> +#ifndef HW_NUCLEI_ECLIC_H
> +#define HW_NUCLEI_ECLIC_H
> +
> +#include "hw/irq.h"
> +#include "hw/sysbus.h"
> +
> +#define TYPE_NUCLEI_ECLIC "riscv.nuclei.eclic"
> +
> +#define INTERRUPT_SOURCE_MIN_ID (18)
> +#define INTERRUPT_SOURCE_MAX_ID (4096)
> +
> +typedef struct NucLeiECLICState NucLeiECLICState;
> +DECLARE_INSTANCE_CHECKER(NucLeiECLICState, NUCLEI_ECLIC,
> +                         TYPE_NUCLEI_ECLIC)
> +
> +typedef struct ECLICPendingInterrupt {
> +    int irq;
> +    int prio;
> +    int level;
> +    int enable;
> +    int trigger;
> +    int sig;
> +    QLIST_ENTRY(ECLICPendingInterrupt) next;
> +} ECLICPendingInterrupt;
> +
> +#define NUCLEI_ECLIC_REG_CLICCFG          0x0000
> +#define NUCLEI_ECLIC_REG_CLICINFO         0x0004
> +#define NUCLEI_ECLIC_REG_MTH              0x000b
> +#define NUCLEI_ECLIC_REG_CLICINTIP_BASE   0x1000
> +#define NUCLEI_ECLIC_REG_CLICINTIE_BASE   0x1001
> +#define NUCLEI_ECLIC_REG_CLICINTATTR_BASE 0x1002
> +#define NUCLEI_ECLIC_REG_CLICINTCTL_BASE  0x1003
> +
> +#define CLICINTCTLBITS 0x6
> +
> +typedef struct NucLeiECLICState {
> +    /*< private >*/
> +    SysBusDevice parent_obj;
> +
> +    /*< public >*/
> +    MemoryRegion mmio;
> +
> +    uint32_t num_sources; /* 4-1024 */
> +
> +    /* config */
> +    uint32_t sources_id;
> +    uint8_t cliccfg; /*  nlbits(1~4) */
> +    uint32_t clicinfo;
> +    uint8_t mth; /* mth(0~7) */
> +    uint8_t *clicintip;
> +    uint8_t *clicintie;
> +    uint8_t *clicintattr; /* shv(0) trig(1~2)*/
> +    uint8_t *clicintctl;
> +    ECLICPendingInterrupt *clicintlist;
> +    uint32_t aperture_size;
> +
> +    QLIST_HEAD(, ECLICPendingInterrupt)
> +    pending_list;
> +    size_t active_count;
> +
> +    /* ECLIC IRQ handlers */
> +    qemu_irq *irqs;
> +
> +} NucLeiECLICState;
> +
> +enum {
> +    Internal_Reserved0_IRQn = 0,     /*!<  Internal reserved */
> +    Internal_Reserved1_IRQn = 1,     /*!<  Internal reserved */
> +    Internal_Reserved2_IRQn = 2,     /*!<  Internal reserved */
> +    Internal_SysTimerSW_IRQn = 3,    /*!<  System Timer SW interrupt */
> +    Internal_Reserved3_IRQn = 4,     /*!<  Internal reserved */
> +    Internal_Reserved4_IRQn = 5,     /*!<  Internal reserved */
> +    Internal_Reserved5_IRQn = 6,     /*!<  Internal reserved */
> +    Internal_SysTimer_IRQn = 7,      /*!<  System Timer Interrupt */
> +    Internal_Reserved6_IRQn = 8,     /*!<  Internal reserved */
> +    Internal_Reserved7_IRQn = 9,     /*!<  Internal reserved */
> +    Internal_Reserved8_IRQn = 10,    /*!<  Internal reserved */
> +    Internal_Reserved9_IRQn = 11,    /*!<  Internal reserved */
> +    Internal_Reserved10_IRQn = 12,   /*!<  Internal reserved */
> +    Internal_Reserved11_IRQn = 13,   /*!<  Internal reserved */
> +    Internal_Reserved12_IRQn = 14,   /*!<  Internal reserved */
> +    Internal_Reserved13_IRQn = 15,   /*!<  Internal reserved */
> +    Internal_Reserved14_IRQn = 16,   /*!<  Internal reserved */
> +    Internal_BusError_IRQn = 17,     /*!<  Bus Error interrupt */
> +    Internal_PerfMon_IRQn = 18,      /*!<  Performance Monitor */
> +    Internal_Reserved_Max_IRQn = 19, /*!<  Internal reserved  Max */
> +};
> +
> +DeviceState *nuclei_eclic_create(hwaddr addr,
> +                                 uint32_t aperture_size, uint32_t num_sources);
> +qemu_irq nuclei_eclic_get_irq(DeviceState *dev, int irq);
> +void nuclei_eclic_systimer_cb(DeviceState *dev);
> +
> +#endif
> --
> 2.17.1
>
>


  reply	other threads:[~2021-05-10  2:22 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-05-07  8:16 [RFC PATCH 0/5] RISC-V:support Nuclei FPGA Evaluation Kit wangjunqiang
2021-05-07  8:16 ` [RFC PATCH 1/5] target/riscv: Add Nuclei CSR and Update interrupt handling wangjunqiang
2021-05-10  2:17   ` Alistair Francis
2021-05-11  3:14     ` Wang Junqiang
2021-05-11  3:43       ` Alistair Francis
2021-05-11  4:00         ` Wang Junqiang
2021-05-11  4:03           ` Alistair Francis
2021-05-07  8:16 ` [RFC PATCH 2/5] hw/intc: Add Nuclei ECLIC device wangjunqiang
2021-05-10  2:20   ` Alistair Francis [this message]
2021-05-10  2:27     ` Bin Meng
2021-05-10  5:26       ` Bin Meng
2021-05-11  3:18         ` Wang Junqiang
2021-05-07  8:16 ` [RFC PATCH 3/5] hw/intc: Add Nuclei Systimer wangjunqiang
2021-05-07  8:16 ` [RFC PATCH 4/5] hw/char: Add Nuclei Uart wangjunqiang
2021-05-07  8:16 ` [RFC PATCH 5/5] Nuclei FPGA Evaluation Kit MCU Machine wangjunqiang
2021-05-07 13:33 ` [RFC PATCH 0/5] RISC-V:support Nuclei FPGA Evaluation Kit no-reply

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=CAKmqyKPVYuESf0TQM8M-KE-72PftMeNCfmQLdEj4Siy9TZxuBA@mail.gmail.com \
    --to=alistair23@gmail.com \
    --cc=Alistair.Francis@wdc.com \
    --cc=alapha23@gmail.com \
    --cc=bin.meng@windriver.com \
    --cc=liweiwei@iscas.ac.cn \
    --cc=palmer@dabbelt.com \
    --cc=qemu-devel@nongnu.org \
    --cc=qemu-riscv@nongnu.org \
    --cc=wangjunqiang@iscas.ac.cn \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).