qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: BALATON Zoltan <balaton@eik.bme.hu>
To: qemu-devel@nongnu.org, qemu-ppc@nongnu.org
Cc: clg@kaod.org, Daniel Henrique Barboza <danielhb413@gmail.com>,
	Peter Maydell <peter.maydell@linaro.org>
Subject: [PATCH v6 11/25] ppc440_sdram: Get rid of the init RAM hack
Date: Sat, 24 Sep 2022 14:28:00 +0200 (CEST)	[thread overview]
Message-ID: <c2eda8f83c82f655aa7821a5a8c9310484bd6a1d.1664021647.git.balaton@eik.bme.hu> (raw)
In-Reply-To: <cover.1664021647.git.balaton@eik.bme.hu>

Remove the do_init parameter of ppc440_sdram_init and enable SDRAM
controller from the board. Firmware does this so it may only be needed
when booting with -kernel without firmware but we enable SDRAM
unconditionally to preserve previous behaviour.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
---
v5: Add function to enable sdram controller

 hw/ppc/ppc440.h         |  3 +--
 hw/ppc/ppc440_uc.c      | 15 +++++++++------
 hw/ppc/sam460ex.c       |  4 +++-
 include/hw/ppc/ppc4xx.h |  2 ++
 4 files changed, 15 insertions(+), 9 deletions(-)

diff --git a/hw/ppc/ppc440.h b/hw/ppc/ppc440.h
index e6c905b7d6..01d76b8000 100644
--- a/hw/ppc/ppc440.h
+++ b/hw/ppc/ppc440.h
@@ -17,8 +17,7 @@ void ppc4xx_l2sram_init(CPUPPCState *env);
 void ppc4xx_cpr_init(CPUPPCState *env);
 void ppc4xx_sdr_init(CPUPPCState *env);
 void ppc440_sdram_init(CPUPPCState *env, int nbanks,
-                       Ppc4xxSdramBank *ram_banks,
-                       int do_init);
+                       Ppc4xxSdramBank *ram_banks);
 void ppc4xx_ahb_init(CPUPPCState *env);
 void ppc4xx_dma_init(CPUPPCState *env, int dcr_base);
 void ppc460ex_pcie_init(CPUPPCState *env);
diff --git a/hw/ppc/ppc440_uc.c b/hw/ppc/ppc440_uc.c
index 3fbfe4ad13..e8bc088c8f 100644
--- a/hw/ppc/ppc440_uc.c
+++ b/hw/ppc/ppc440_uc.c
@@ -16,6 +16,7 @@
 #include "qemu/module.h"
 #include "hw/irq.h"
 #include "exec/memory.h"
+#include "cpu.h"
 #include "hw/ppc/ppc4xx.h"
 #include "hw/qdev-properties.h"
 #include "hw/pci/pci.h"
@@ -727,12 +728,11 @@ static void sdram_reset(void *opaque)
     ppc440_sdram_t *sdram = opaque;
 
     sdram->addr = 0;
-    sdram->mcopt2 = SDRAM_DDR2_MCOPT2_DCEN;
+    sdram->mcopt2 = 0;
 }
 
 void ppc440_sdram_init(CPUPPCState *env, int nbanks,
-                       Ppc4xxSdramBank *ram_banks,
-                       int do_init)
+                       Ppc4xxSdramBank *ram_banks)
 {
     ppc440_sdram_t *sdram;
     int i;
@@ -749,9 +749,6 @@ void ppc440_sdram_init(CPUPPCState *env, int nbanks,
                      sdram, &dcr_read_sdram, &dcr_write_sdram);
     ppc_dcr_register(env, SDRAM0_CFGDATA,
                      sdram, &dcr_read_sdram, &dcr_write_sdram);
-    if (do_init) {
-        sdram_map_bcr(sdram);
-    }
 
     ppc_dcr_register(env, SDRAM_R0BAS,
                      sdram, &dcr_read_sdram, &dcr_write_sdram);
@@ -773,6 +770,12 @@ void ppc440_sdram_init(CPUPPCState *env, int nbanks,
                      sdram, &dcr_read_sdram, &dcr_write_sdram);
 }
 
+void ppc440_sdram_enable(CPUPPCState *env)
+{
+    ppc_dcr_write(env->dcr_env, SDRAM0_CFGADDR, 0x21);
+    ppc_dcr_write(env->dcr_env, SDRAM0_CFGDATA, 0x08000000);
+}
+
 /*****************************************************************************/
 /* PLB to AHB bridge */
 enum {
diff --git a/hw/ppc/sam460ex.c b/hw/ppc/sam460ex.c
index f4c2a693fb..9c01211b20 100644
--- a/hw/ppc/sam460ex.c
+++ b/hw/ppc/sam460ex.c
@@ -345,7 +345,9 @@ static void sam460ex_init(MachineState *machine)
     ppc4xx_sdram_banks(machine->ram, 1, ram_banks, ppc460ex_sdram_bank_sizes);
 
     /* FIXME: does 460EX have ECC interrupts? */
-    ppc440_sdram_init(env, 1, ram_banks, 1);
+    ppc440_sdram_init(env, 1, ram_banks);
+    /* Enable SDRAM memory regions as we may boot without firmware */
+    ppc440_sdram_enable(env);
 
     /* IIC controllers and devices */
     dev = sysbus_create_simple(TYPE_PPC4xx_I2C, 0x4ef600700,
diff --git a/include/hw/ppc/ppc4xx.h b/include/hw/ppc/ppc4xx.h
index 558500fb97..78a845399e 100644
--- a/include/hw/ppc/ppc4xx.h
+++ b/include/hw/ppc/ppc4xx.h
@@ -37,6 +37,8 @@ typedef struct {
     uint32_t bcr;
 } Ppc4xxSdramBank;
 
+void ppc440_sdram_enable(CPUPPCState *env);
+
 void ppc4xx_sdram_banks(MemoryRegion *ram, int nr_banks,
                         Ppc4xxSdramBank ram_banks[],
                         const ram_addr_t sdram_bank_sizes[]);
-- 
2.30.4



  parent reply	other threads:[~2022-09-24 12:47 UTC|newest]

Thread overview: 46+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-09-24 12:27 [PATCH v6 00/25] ppc4xx_sdram QOMify and clean ups BALATON Zoltan
2022-09-24 12:27 ` [PATCH v6 01/25] ppc440_bamboo: Remove unnecessary memsets BALATON Zoltan
2022-09-26 16:46   ` Daniel Henrique Barboza
2022-09-24 12:27 ` [PATCH v6 02/25] ppc4xx: Introduce Ppc4xxSdramBank struct BALATON Zoltan
2022-09-24 12:27 ` [PATCH v6 03/25] ppc4xx_sdram: Get rid of the init RAM hack BALATON Zoltan
2022-09-26 16:52   ` Daniel Henrique Barboza
2022-09-24 12:27 ` [PATCH v6 04/25] ppc4xx: Use Ppc4xxSdramBank in ppc4xx_sdram_banks() BALATON Zoltan
2022-09-24 12:27 ` [PATCH v6 05/25] ppc440_bamboo: Add missing 4 MiB valid memory size BALATON Zoltan
2022-09-24 12:27 ` [PATCH v6 06/25] ppc4xx_sdram: Move size check to ppc4xx_sdram_init() BALATON Zoltan
2022-09-24 12:27 ` [PATCH v6 07/25] ppc4xx_sdram: QOM'ify BALATON Zoltan
2022-09-24 12:27 ` [PATCH v6 08/25] ppc4xx_sdram: Drop extra zeros for readability BALATON Zoltan
2022-09-24 12:27 ` [PATCH v6 09/25] ppc440_sdram: Split off map/unmap of sdram banks for later reuse BALATON Zoltan
2022-09-24 12:27 ` [PATCH v6 10/25] ppc440_sdram: Implement enable bit in the DDR2 SDRAM controller BALATON Zoltan
2022-09-26 16:57   ` Daniel Henrique Barboza
2022-09-24 12:28 ` BALATON Zoltan [this message]
2022-09-26 16:59   ` [PATCH v6 11/25] ppc440_sdram: Get rid of the init RAM hack Daniel Henrique Barboza
2022-09-24 12:28 ` [PATCH v6 12/25] ppc440_sdram: Rename local variable for readability BALATON Zoltan
2022-09-24 12:28 ` [PATCH v6 13/25] ppc4xx_sdram: Rename functions to prevent name clashes BALATON Zoltan
2022-09-24 12:28 ` [PATCH v6 14/25] ppc440_sdram: Move RAM size check to ppc440_sdram_init BALATON Zoltan
2022-09-26 16:58   ` Cédric Le Goater
2022-10-14 22:09   ` Daniel Henrique Barboza
2022-10-14 22:52     ` BALATON Zoltan
2022-10-15 10:03       ` Daniel Henrique Barboza
2022-10-15 11:40         ` BALATON Zoltan
2022-10-15 12:03           ` Daniel Henrique Barboza
2022-10-15 13:20             ` BALATON Zoltan
2022-10-15 14:27               ` Daniel Henrique Barboza
2022-09-24 12:28 ` [PATCH v6 15/25] ppc440_sdram: QOM'ify BALATON Zoltan
2022-09-24 12:28 ` [PATCH v6 16/25] ppc440_uc.c: Move some macros to ppc4xx.h BALATON Zoltan
2022-09-26 16:57   ` Cédric Le Goater
2022-09-24 12:28 ` [PATCH v6 17/25] ppc440_uc.c: Remove unneeded parenthesis BALATON Zoltan
2022-09-26 16:57   ` Cédric Le Goater
2022-09-24 12:28 ` [PATCH v6 18/25] ppc440_uc.c: Move DDR2 SDRAM controller model to ppc4xx_sdram.c BALATON Zoltan
2022-09-24 12:28 ` [PATCH v6 19/25] ppc4xx_devs.c: Move DDR " BALATON Zoltan
2022-09-24 12:28 ` [PATCH v6 20/25] ppc4xx_sdram: Move ppc4xx_sdram_banks() " BALATON Zoltan
2022-09-24 12:28 ` [PATCH v6 21/25] ppc4xx_sdram: Use hwaddr for memory bank size BALATON Zoltan
2022-09-24 12:28 ` [PATCH v6 22/25] ppc4xx_sdram: Rename local state variable for brevity BALATON Zoltan
2022-09-24 12:28 ` [PATCH v6 23/25] ppc4xx_sdram: Generalise bank setup BALATON Zoltan
2022-09-24 12:28 ` [PATCH v6 24/25] ppc4xx_sdram: Convert DDR SDRAM controller to new bank handling BALATON Zoltan
2022-09-24 12:28 ` [PATCH v6 25/25] ppc4xx_sdram: Add errp parameter to ppc4xx_sdram_banks() BALATON Zoltan
2022-09-26 17:09 ` [PATCH v6 00/25] ppc4xx_sdram QOMify and clean ups Daniel Henrique Barboza
2022-09-26 17:32   ` Daniel Henrique Barboza
2022-09-26 22:47     ` BALATON Zoltan
2022-10-05 12:02       ` BALATON Zoltan
2022-09-26 17:10 ` Cédric Le Goater
2022-09-26 22:39   ` BALATON Zoltan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=c2eda8f83c82f655aa7821a5a8c9310484bd6a1d.1664021647.git.balaton@eik.bme.hu \
    --to=balaton@eik.bme.hu \
    --cc=clg@kaod.org \
    --cc=danielhb413@gmail.com \
    --cc=peter.maydell@linaro.org \
    --cc=qemu-devel@nongnu.org \
    --cc=qemu-ppc@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).