Re: [PATCH v3 00/18] Support Multifd for RDMA migration

[Zheng Chuan <zhengchuan@huawei.com>]

On 2020/10/21 17:25, Zhanghailiang wrote:
> Hi zhengchuan,
> 
>> -----Original Message-----
>> From: zhengchuan
>> Sent: Saturday, October 17, 2020 12:26 PM
>> To: quintela@redhat.com; dgilbert@redhat.com
>> Cc: Zhanghailiang <zhang.zhanghailiang@huawei.com>; Chenzhendong (alex)
>> <alex.chen@huawei.com>; Xiexiangyou <xiexiangyou@huawei.com>; wanghao
>> (O) <wanghao232@huawei.com>; yubihong <yubihong@huawei.com>;
>> fengzhimin1@huawei.com; qemu-devel@nongnu.org
>> Subject: [PATCH v3 00/18] Support Multifd for RDMA migration
>>
>> Now I continue to support multifd for RDMA migration based on my colleague
>> zhiming's work:)
>>
>> The previous RFC patches is listed below:
>> v1:
>> https://www.mail-archive.com/qemu-devel@nongnu.org/msg669455.html
>> v2:
>> https://www.mail-archive.com/qemu-devel@nongnu.org/msg679188.html
>>
>> As descried in previous RFC, the RDMA bandwidth is not fully utilized for over
>> 25Gigabit NIC because of single channel for RDMA migration.
>> This patch series is going to support multifd for RDMA migration based on multifd
>> framework.
>>
>> Comparsion is between origion and multifd RDMA migration is re-tested for v3.
>> The VM specifications for migration are as follows:
>> - VM use 4k page;
>> - the number of VCPU is 4;
>> - the total memory is 16Gigabit;
>> - use 'mempress' tool to pressurize VM(mempress 8000 500);
>> - use 25Gigabit network card to migrate;
>>
>> For origin RDMA and MultiRDMA migration, the total migration times of VM are
>> as follows:
>> +++++++++++++++++++++++++++++++++++++++++++++++++
>> |             | NOT rdma-pin-all | rdma-pin-all |
>> +++++++++++++++++++++++++++++++++++++++++++++++++
>> | origin RDMA |       26 s       |     29 s     |
>> -------------------------------------------------
>> |  MultiRDMA  |       16 s       |     17 s     |
>> +++++++++++++++++++++++++++++++++++++++++++++++++
>>
>> Test the multifd RDMA migration like this:
>> virsh migrate --live --multiFd --migrateuri
> 
> There is no option '--multiFd' for virsh commands, It seems that, we added this private option for internal usage.
> It's better to provide testing method by using qemu commands.
> 
> 
Hi, Hailiang
Yes, it should be, will update in V4.

Also, Ping.

Dave, Juan.

Any suggestion and comment about this series? Hope this feature could catch up with qemu 5.2.

> Thanks.
> 
>> rdma://192.168.1.100 [VM] --listen-address 0.0.0.0
>> qemu+tcp://192.168.1.100/system --verbose
>>
>> v2 -> v3:
>>     create multifd ops for both tcp and rdma
>>     do not export rdma to avoid multifd code in mess
>>     fix build issue for non-rdma
>>     fix some codestyle and buggy code
>>
>> Chuan Zheng (18):
>>   migration/rdma: add the 'migrate_use_rdma_pin_all' function
>>   migration/rdma: judge whether or not the RDMA is used for migration
>>   migration/rdma: create multifd_setup_ops for Tx/Rx thread
>>   migration/rdma: add multifd_setup_ops for rdma
>>   migration/rdma: do not need sync main for rdma
>>   migration/rdma: export MultiFDSendParams/MultiFDRecvParams
>>   migration/rdma: add rdma field into multifd send/recv param
>>   migration/rdma: export getQIOChannel to get QIOchannel in rdma
>>   migration/rdma: add multifd_rdma_load_setup() to setup multifd rdma
>>   migration/rdma: Create the multifd recv channels for RDMA
>>   migration/rdma: record host_port for multifd RDMA
>>   migration/rdma: Create the multifd send channels for RDMA
>>   migration/rdma: Add the function for dynamic page registration
>>   migration/rdma: register memory for multifd RDMA channels
>>   migration/rdma: only register the memory for multifd channels
>>   migration/rdma: add rdma_channel into Migrationstate field
>>   migration/rdma: send data for both rdma-pin-all and NOT rdma-pin-all
>>     mode
>>   migration/rdma: RDMA cleanup for multifd migration
>>
>>  migration/migration.c |  24 +++
>>  migration/migration.h |  11 ++
>>  migration/multifd.c   |  97 +++++++++-
>>  migration/multifd.h   |  24 +++
>>  migration/qemu-file.c |   5 +
>>  migration/qemu-file.h |   1 +
>>  migration/rdma.c      | 503
>> +++++++++++++++++++++++++++++++++++++++++++++++++-
>>  7 files changed, 653 insertions(+), 12 deletions(-)
>>
>> --
>> 1.8.3.1
> 
> .
> 

-- 
Regards.
Chuan