From: "Philippe Mathieu-Daudé" <philmd@redhat.com>
To: Kamil Rytarowski <n54@gmx.com>,
rth@twiddle.net, ehabkost@redhat.com, slp@redhat.com,
pbonzini@redhat.com, peter.maydell@linaro.org, max@m00nbsd.net
Cc: qemu-devel@nongnu.org
Subject: Re: [PATCH v2 2/4] Add the NetBSD Virtual Machine Monitor accelerator.
Date: Mon, 3 Feb 2020 12:41:48 +0100 [thread overview]
Message-ID: <e3279b9d-e6f9-43f3-3ebb-b31ba8ff5f7e@redhat.com> (raw)
In-Reply-To: <20200128140945.929-3-n54@gmx.com>
On 1/28/20 3:09 PM, Kamil Rytarowski wrote:
> From: Maxime Villard <max@m00nbsd.net>
>
> Introduces the configure support for the new NetBSD Virtual Machine Monitor that
> allows for hypervisor acceleration from usermode components on the NetBSD
> platform.
>
> Signed-off-by: Maxime Villard <max@m00nbsd.net>
> Signed-off-by: Kamil Rytarowski <n54@gmx.com>
> Reviewed-by: Sergio Lopez <slp@redhat.com>
> ---
> configure | 36 ++++++++++++++++++++++++++++++++++++
> qemu-options.hx | 16 ++++++++--------
> 2 files changed, 44 insertions(+), 8 deletions(-)
>
> diff --git a/configure b/configure
> index 0ce2c0354a..eb456a271e 100755
> --- a/configure
> +++ b/configure
> @@ -241,6 +241,17 @@ supported_whpx_target() {
> return 1
> }
>
> +supported_nvmm_target() {
> + test "$nvmm" = "yes" || return 1
> + glob "$1" "*-softmmu" || return 1
> + case "${1%-softmmu}" in
> + i386|x86_64)
> + return 0
> + ;;
> + esac
> + return 1
> +}
> +
> supported_target() {
> case "$1" in
> *-softmmu)
> @@ -268,6 +279,7 @@ supported_target() {
> supported_hax_target "$1" && return 0
> supported_hvf_target "$1" && return 0
> supported_whpx_target "$1" && return 0
> + supported_nvmm_target "$1" && return 0
> print_error "TCG disabled, but hardware accelerator not available for '$target'"
> return 1
> }
> @@ -387,6 +399,7 @@ kvm="no"
> hax="no"
> hvf="no"
> whpx="no"
> +nvmm="no"
> rdma=""
> pvrdma=""
> gprof="no"
> @@ -1168,6 +1181,10 @@ for opt do
> ;;
> --enable-whpx) whpx="yes"
> ;;
> + --disable-nvmm) nvmm="no"
> + ;;
> + --enable-nvmm) nvmm="yes"
> + ;;
> --disable-tcg-interpreter) tcg_interpreter="no"
> ;;
> --enable-tcg-interpreter) tcg_interpreter="yes"
> @@ -1768,6 +1785,7 @@ disabled with --disable-FEATURE, default is enabled if available:
> hax HAX acceleration support
> hvf Hypervisor.framework acceleration support
> whpx Windows Hypervisor Platform acceleration support
> + nvmm NetBSD Virtual Machine Monitor acceleration support
> rdma Enable RDMA-based migration
> pvrdma Enable PVRDMA support
> vde support for vde network
> @@ -2757,6 +2775,20 @@ if test "$whpx" != "no" ; then
> fi
> fi
>
Maybe you can add something like:
if test "$targetos" = "NetBSD"; then
nvmm="check"
fi
to build by default with NVMM if available.
> +##########################################
> +# NetBSD Virtual Machine Monitor (NVMM) accelerator check
> +if test "$nvmm" != "no" ; then
> + if check_include "nvmm.h" ; then
> + nvmm="yes"
> + LIBS="-lnvmm $LIBS"
> + else
> + if test "$nvmm" = "yes"; then
> + feature_not_found "NVMM" "NVMM is not available"
> + fi
> + nvmm="no"
> + fi
> +fi
> +
> ##########################################
> # Sparse probe
> if test "$sparse" != "no" ; then
> @@ -6495,6 +6527,7 @@ echo "KVM support $kvm"
> echo "HAX support $hax"
> echo "HVF support $hvf"
> echo "WHPX support $whpx"
> +echo "NVMM support $nvmm"
> echo "TCG support $tcg"
> if test "$tcg" = "yes" ; then
> echo "TCG debug enabled $debug_tcg"
> @@ -7771,6 +7804,9 @@ fi
> if test "$target_aligned_only" = "yes" ; then
> echo "TARGET_ALIGNED_ONLY=y" >> $config_target_mak
> fi
> +if supported_nvmm_target $target; then
> + echo "CONFIG_NVMM=y" >> $config_target_mak
> +fi
> if test "$target_bigendian" = "yes" ; then
> echo "TARGET_WORDS_BIGENDIAN=y" >> $config_target_mak
> fi
> diff --git a/qemu-options.hx b/qemu-options.hx
> index e9d6231438..4ddf7c91a0 100644
> --- a/qemu-options.hx
> +++ b/qemu-options.hx
> @@ -31,7 +31,7 @@ DEF("machine", HAS_ARG, QEMU_OPTION_machine, \
> "-machine [type=]name[,prop[=value][,...]]\n"
> " selects emulated machine ('-machine help' for list)\n"
> " property accel=accel1[:accel2[:...]] selects accelerator\n"
> - " supported accelerators are kvm, xen, hax, hvf, whpx or tcg (default: tcg)\n"
> + " supported accelerators are kvm, xen, hax, hvf, nvmm, whpx or tcg (default: tcg)\n"
> " vmport=on|off|auto controls emulation of vmport (default: auto)\n"
> " dump-guest-core=on|off include guest memory in a core dump (default=on)\n"
> " mem-merge=on|off controls memory merge support (default: on)\n"
> @@ -63,9 +63,9 @@ Supported machine properties are:
> @table @option
> @item accel=@var{accels1}[:@var{accels2}[:...]]
> This is used to enable an accelerator. Depending on the target architecture,
> -kvm, xen, hax, hvf, whpx or tcg can be available. By default, tcg is used. If there is
> -more than one accelerator specified, the next one is used if the previous one
> -fails to initialize.
> +kvm, xen, hax, hvf, nvmm, whpx or tcg can be available. By default, tcg is used.
> +If there is more than one accelerator specified, the next one is used if the
> +previous one fails to initialize.
> @item vmport=on|off|auto
> Enables emulation of VMWare IO port, for vmmouse etc. auto says to select the
> value based on accel. For accel=xen the default is off otherwise the default
> @@ -110,7 +110,7 @@ ETEXI
>
> DEF("accel", HAS_ARG, QEMU_OPTION_accel,
> "-accel [accel=]accelerator[,prop[=value][,...]]\n"
> - " select accelerator (kvm, xen, hax, hvf, whpx or tcg; use 'help' for a list)\n"
> + " select accelerator (kvm, xen, hax, hvf, nvmm, whpx or tcg; use 'help' for a list)\n"
> " igd-passthru=on|off (enable Xen integrated Intel graphics passthrough, default=off)\n"
> " kernel-irqchip=on|off|split controls accelerated irqchip support (default=on)\n"
> " kvm-shadow-mem=size of KVM shadow MMU in bytes\n"
> @@ -120,9 +120,9 @@ STEXI
> @item -accel @var{name}[,prop=@var{value}[,...]]
> @findex -accel
> This is used to enable an accelerator. Depending on the target architecture,
> -kvm, xen, hax, hvf, whpx or tcg can be available. By default, tcg is used. If there is
> -more than one accelerator specified, the next one is used if the previous one
> -fails to initialize.
> +kvm, xen, hax, hvf, nvmm, whpx or tcg can be available. By default, tcg is used.
> +If there is more than one accelerator specified, the next one is used if the
> +previous one fails to initialize.
> @table @option
> @item igd-passthru=on|off
> When Xen is in use, this option controls whether Intel integrated graphics
> --
> 2.24.1
>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
next prev parent reply other threads:[~2020-02-03 11:43 UTC|newest]
Thread overview: 81+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20200107124903.16505-1-n54@gmx.com>
2020-01-28 14:09 ` [PATCH v2 0/4] Implements the NetBSD Virtual Machine Monitor accelerator Kamil Rytarowski
2020-01-28 14:09 ` [PATCH v2 1/4] Add the NVMM vcpu API Kamil Rytarowski
2020-02-03 11:42 ` Philippe Mathieu-Daudé
2020-01-28 14:09 ` [PATCH v2 2/4] Add the NetBSD Virtual Machine Monitor accelerator Kamil Rytarowski
2020-02-03 11:41 ` Philippe Mathieu-Daudé [this message]
2020-02-03 11:56 ` Kamil Rytarowski
2020-02-03 12:10 ` Philippe Mathieu-Daudé
2020-03-02 17:12 ` Paolo Bonzini
2020-03-02 18:05 ` Kamil Rytarowski
2020-03-02 19:14 ` Maxime Villard
2020-03-02 19:40 ` Paolo Bonzini
2020-03-02 21:10 ` Kamil Rytarowski
2020-03-02 22:45 ` Paolo Bonzini
2020-03-02 17:11 ` Paolo Bonzini
2020-03-02 18:09 ` Kamil Rytarowski
2020-01-28 14:09 ` [PATCH v2 3/4] Introduce the NVMM impl Kamil Rytarowski
2020-02-03 11:51 ` Philippe Mathieu-Daudé
2020-02-05 17:22 ` Kamil Rytarowski
2020-02-05 17:47 ` Maxime Villard
2020-01-28 14:09 ` [PATCH v2 4/4] Add the NVMM acceleration enlightenments Kamil Rytarowski
2020-02-03 11:54 ` Philippe Mathieu-Daudé
2020-02-06 10:24 ` Kamil Rytarowski
2020-02-06 12:18 ` Philippe Mathieu-Daudé
2020-02-06 13:06 ` Markus Armbruster
2020-02-06 13:09 ` Philippe Mathieu-Daudé
2020-02-06 13:31 ` Kamil Rytarowski
2020-02-06 14:13 ` Markus Armbruster
2020-02-06 15:38 ` Kamil Rytarowski
2020-02-06 16:07 ` Philippe Mathieu-Daudé
2020-02-06 16:59 ` Kamil Rytarowski
2020-02-03 9:52 ` [PATCH v2 0/4] Implements the NetBSD Virtual Machine Monitor accelerator Kamil Rytarowski
2020-02-06 11:57 ` [PATCH v3 " Kamil Rytarowski
2020-02-06 11:57 ` [PATCH v3 1/4] Add the NVMM vcpu API Kamil Rytarowski
2020-02-06 21:06 ` Jared McNeill
2020-02-06 11:57 ` [PATCH v3 2/4] Add the NetBSD Virtual Machine Monitor accelerator Kamil Rytarowski
2020-02-06 21:06 ` Jared McNeill
2020-02-06 11:57 ` [PATCH v3 3/4] Introduce the NVMM impl Kamil Rytarowski
2020-02-06 21:07 ` Jared McNeill
2020-02-06 11:57 ` [PATCH v3 4/4] Add the NVMM acceleration enlightenments Kamil Rytarowski
2020-02-06 21:07 ` Jared McNeill
2020-02-06 13:13 ` [PATCH v3 0/4] Implements the NetBSD Virtual Machine Monitor accelerator no-reply
2020-02-06 13:21 ` Kamil Rytarowski
2020-02-06 16:01 ` Philippe Mathieu-Daudé
2020-02-06 21:32 ` [PATCH v4 " Kamil Rytarowski
2020-02-06 21:32 ` [PATCH v4 1/4] Add the NVMM vcpu API Kamil Rytarowski
2020-08-11 12:47 ` [PATCH v5 " Kamil Rytarowski
2020-08-11 12:47 ` [PATCH v5 2/4] Add the NetBSD Virtual Machine Monitor accelerator Kamil Rytarowski
2020-08-11 12:47 ` [PATCH v5 3/4] Introduce the NVMM impl Kamil Rytarowski
2020-08-11 12:47 ` [PATCH v5 4/4] Add the NVMM acceleration enlightenments Kamil Rytarowski
2020-08-11 13:01 ` [PATCH v5 1/4] Add the NVMM vcpu API Kamil Rytarowski
2020-08-11 13:01 ` [PATCH v5 2/4] Add the NetBSD Virtual Machine Monitor accelerator Kamil Rytarowski
2020-08-11 13:01 ` [PATCH v5 3/4] Introduce the NVMM impl Kamil Rytarowski
2020-08-11 13:01 ` [PATCH v5 4/4] Add the NVMM acceleration enlightenments Kamil Rytarowski
2020-09-04 23:28 ` [PATCH v5 1/4] Add the NVMM vcpu API Kamil Rytarowski
2020-02-06 21:32 ` [PATCH v4 2/4] Add the NetBSD Virtual Machine Monitor accelerator Kamil Rytarowski
2020-02-06 21:32 ` [PATCH v4 3/4] Introduce the NVMM impl Kamil Rytarowski
2020-02-06 23:28 ` [PATCH v4 3/4 FIXUP] " Kamil Rytarowski
2020-03-02 18:13 ` [PATCH v4 3/4] " Paolo Bonzini
2020-03-02 19:28 ` Maxime Villard
2020-03-02 19:35 ` Paolo Bonzini
2020-03-10 6:45 ` Maxime Villard
2020-03-10 10:15 ` Kamil Rytarowski
2020-03-10 10:58 ` Paolo Bonzini
2020-03-10 19:14 ` Maxime Villard
2020-03-11 18:03 ` Paolo Bonzini
2020-03-11 20:14 ` Maxime Villard
2020-03-11 20:42 ` Paolo Bonzini
2020-03-11 21:21 ` Maxime Villard
2020-03-11 21:22 ` Kamil Rytarowski
2020-03-11 21:44 ` Paolo Bonzini
2020-03-12 7:08 ` Maxime Villard
2020-07-21 13:42 ` Kamil Rytarowski
2020-02-06 21:32 ` [PATCH v4 4/4] Add the NVMM acceleration enlightenments Kamil Rytarowski
2020-02-17 9:07 ` [PATCH v4 0/4] Implements the NetBSD Virtual Machine Monitor accelerator Kamil Rytarowski
2020-02-24 15:17 ` Kamil Rytarowski
2020-03-02 17:02 ` Kamil Rytarowski
2020-03-02 17:10 ` Eduardo Habkost
2020-03-02 17:10 ` Kamil Rytarowski
2020-03-02 17:22 ` Eduardo Habkost
2020-01-28 8:54 [PATCH 2/4] Add " Sergio Lopez
2020-01-28 10:51 ` [PATCH v2 " Kamil Rytarowski
2020-01-28 13:20 ` Sergio Lopez
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=e3279b9d-e6f9-43f3-3ebb-b31ba8ff5f7e@redhat.com \
--to=philmd@redhat.com \
--cc=ehabkost@redhat.com \
--cc=max@m00nbsd.net \
--cc=n54@gmx.com \
--cc=pbonzini@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
--cc=rth@twiddle.net \
--cc=slp@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).