qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Eric Auger <eric.auger@redhat.com>
To: Peter Xu <peterx@redhat.com>, qemu-devel@nongnu.org
Cc: Peter Maydell <peter.maydell@linaro.org>,
	"Daniel P . Berrange" <berrange@redhat.com>,
	Eduardo Habkost <ehabkost@redhat.com>,
	"Michael S . Tsirkin" <mst@redhat.com>,
	Jason Wang <jasowang@redhat.com>,
	David Hildenbrand <david@redhat.com>,
	Markus Armbruster <armbru@redhat.com>,
	Shannon Zhao <shannon.zhaosl@gmail.com>,
	Alex Williamson <alex.williamson@redhat.com>,
	Paolo Bonzini <pbonzini@redhat.com>,
	Igor Mammedov <imammedo@redhat.com>,
	David Gibson <david@gibson.dropbear.id.au>
Subject: Re: [PATCH 3/8] pci: Use pci_for_each_device_under_bus*()
Date: Thu, 21 Oct 2021 13:34:07 +0200	[thread overview]
Message-ID: <f1bdd887-975f-8d23-e933-39b95843c2b1@redhat.com> (raw)
In-Reply-To: <20211021104259.57754-4-peterx@redhat.com>

Hi Peter,
On 10/21/21 12:42 PM, Peter Xu wrote:
> Replace all the call sites of existing pci_for_each_device*() where the bus
> number is calculated from a PCIBus* already.  It should avoid the lookup of the
> PCIBus again.
>
> Signed-off-by: Peter Xu <peterx@redhat.com>
> ---
>  hw/i386/acpi-build.c       |  5 ++---
>  hw/pci/pcie.c              |  4 +---
>  hw/ppc/spapr_pci.c         | 12 +++++-------
>  hw/ppc/spapr_pci_nvlink2.c |  7 +++----
>  hw/ppc/spapr_pci_vfio.c    |  4 ++--
>  hw/s390x/s390-pci-bus.c    |  5 ++---
>  hw/xen/xen_pt.c            |  4 ++--
>  7 files changed, 17 insertions(+), 24 deletions(-)
>
> diff --git a/hw/i386/acpi-build.c b/hw/i386/acpi-build.c
> index 81418b7911..a76b17ed92 100644
> --- a/hw/i386/acpi-build.c
> +++ b/hw/i386/acpi-build.c
> @@ -2132,8 +2132,7 @@ dmar_host_bridges(Object *obj, void *opaque)
>          PCIBus *bus = PCI_HOST_BRIDGE(obj)->bus;
>  
>          if (bus && !pci_bus_bypass_iommu(bus)) {
> -            pci_for_each_device(bus, pci_bus_num(bus), insert_scope,
> -                                scope_blob);
> +            pci_for_each_device_under_bus(bus, insert_scope, scope_blob);
>          }
>      }
>  
> @@ -2339,7 +2338,7 @@ ivrs_host_bridges(Object *obj, void *opaque)
>          PCIBus *bus = PCI_HOST_BRIDGE(obj)->bus;
>  
>          if (bus && !pci_bus_bypass_iommu(bus)) {
> -            pci_for_each_device(bus, pci_bus_num(bus), insert_ivhd, ivhd_blob);
> +            pci_for_each_device_under_bus(bus, insert_ivhd, ivhd_blob);
>          }
>      }
>  
> diff --git a/hw/pci/pcie.c b/hw/pci/pcie.c
> index 6e95d82903..914a9bf3d1 100644
> --- a/hw/pci/pcie.c
> +++ b/hw/pci/pcie.c
> @@ -694,9 +694,7 @@ void pcie_cap_slot_write_config(PCIDevice *dev,
>          (!(old_slt_ctl & PCI_EXP_SLTCTL_PCC) ||
>          (old_slt_ctl & PCI_EXP_SLTCTL_PIC_OFF) != PCI_EXP_SLTCTL_PIC_OFF)) {
>          PCIBus *sec_bus = pci_bridge_get_sec_bus(PCI_BRIDGE(dev));
> -        pci_for_each_device(sec_bus, pci_bus_num(sec_bus),
> -                            pcie_unplug_device, NULL);
> -
> +        pci_for_each_device_under_bus(sec_bus, pcie_unplug_device, NULL);
>          pci_word_test_and_clear_mask(exp_cap + PCI_EXP_SLTSTA,
>                                       PCI_EXP_SLTSTA_PDS);
>          if (dev->cap_present & QEMU_PCIE_LNKSTA_DLLLA ||
> diff --git a/hw/ppc/spapr_pci.c b/hw/ppc/spapr_pci.c
> index 7430bd6314..5bfd4aa9e5 100644
> --- a/hw/ppc/spapr_pci.c
> +++ b/hw/ppc/spapr_pci.c
> @@ -1317,8 +1317,7 @@ static int spapr_dt_pci_bus(SpaprPhbState *sphb, PCIBus *bus,
>                            RESOURCE_CELLS_SIZE));
>  
>      assert(bus);
> -    pci_for_each_device_reverse(bus, pci_bus_num(bus),
> -                                spapr_dt_pci_device_cb, &cbinfo);
> +    pci_for_each_device_under_bus_reverse(bus, spapr_dt_pci_device_cb, &cbinfo);
>      if (cbinfo.err) {
>          return cbinfo.err;
>      }
> @@ -2306,8 +2305,8 @@ static void spapr_phb_pci_enumerate_bridge(PCIBus *bus, PCIDevice *pdev,
>          return;
>      }
>  
> -    pci_for_each_device(sec_bus, pci_bus_num(sec_bus),
> -                        spapr_phb_pci_enumerate_bridge, bus_no);
> +    pci_for_each_device_under_bus(sec_bus, spapr_phb_pci_enumerate_bridge,
> +                                  bus_no);
>      pci_default_write_config(pdev, PCI_SUBORDINATE_BUS, *bus_no, 1);
>  }
>  
> @@ -2316,9 +2315,8 @@ static void spapr_phb_pci_enumerate(SpaprPhbState *phb)
>      PCIBus *bus = PCI_HOST_BRIDGE(phb)->bus;
>      unsigned int bus_no = 0;
>  
> -    pci_for_each_device(bus, pci_bus_num(bus),
> -                        spapr_phb_pci_enumerate_bridge,
> -                        &bus_no);
> +    pci_for_each_device_under_bus(bus, spapr_phb_pci_enumerate_bridge,
> +                                  &bus_no);
>  
>  }
>  
> diff --git a/hw/ppc/spapr_pci_nvlink2.c b/hw/ppc/spapr_pci_nvlink2.c
> index 8ef9b40a18..7fb0cf4d04 100644
> --- a/hw/ppc/spapr_pci_nvlink2.c
> +++ b/hw/ppc/spapr_pci_nvlink2.c
> @@ -164,8 +164,7 @@ static void spapr_phb_pci_collect_nvgpu(PCIBus *bus, PCIDevice *pdev,
>          return;
>      }
>  
> -    pci_for_each_device(sec_bus, pci_bus_num(sec_bus),
> -                        spapr_phb_pci_collect_nvgpu, opaque);
> +    pci_for_each_device_under_bus(sec_bus, spapr_phb_pci_collect_nvgpu, opaque);
>  }
>  
>  void spapr_phb_nvgpu_setup(SpaprPhbState *sphb, Error **errp)
> @@ -183,8 +182,8 @@ void spapr_phb_nvgpu_setup(SpaprPhbState *sphb, Error **errp)
>      sphb->nvgpus->nv2_atsd_current = sphb->nv2_atsd_win_addr;
>  
>      bus = PCI_HOST_BRIDGE(sphb)->bus;
> -    pci_for_each_device(bus, pci_bus_num(bus),
> -                        spapr_phb_pci_collect_nvgpu, sphb->nvgpus);
> +    pci_for_each_device_under_bus(bus, spapr_phb_pci_collect_nvgpu,
> +                                  sphb->nvgpus);
>  
>      if (sphb->nvgpus->err) {
>          error_propagate(errp, sphb->nvgpus->err);
> diff --git a/hw/ppc/spapr_pci_vfio.c b/hw/ppc/spapr_pci_vfio.c
> index f3b37df8ea..2a76b4e0b5 100644
> --- a/hw/ppc/spapr_pci_vfio.c
> +++ b/hw/ppc/spapr_pci_vfio.c
> @@ -164,8 +164,8 @@ static void spapr_phb_vfio_eeh_clear_dev_msix(PCIBus *bus,
>  
>  static void spapr_phb_vfio_eeh_clear_bus_msix(PCIBus *bus, void *opaque)
>  {
> -       pci_for_each_device(bus, pci_bus_num(bus),
> -                           spapr_phb_vfio_eeh_clear_dev_msix, NULL);
> +       pci_for_each_device_under_bus(bus, spapr_phb_vfio_eeh_clear_dev_msix,
> +                                     NULL);
>  }
>  
>  static void spapr_phb_vfio_eeh_pre_reset(SpaprPhbState *sphb)
> diff --git a/hw/s390x/s390-pci-bus.c b/hw/s390x/s390-pci-bus.c
> index 6fafffb029..1b51a72838 100644
> --- a/hw/s390x/s390-pci-bus.c
> +++ b/hw/s390x/s390-pci-bus.c
> @@ -1163,8 +1163,7 @@ static void s390_pci_enumerate_bridge(PCIBus *bus, PCIDevice *pdev,
>      }
>  
>      /* Assign numbers to all child bridges. The last is the highest number. */
> -    pci_for_each_device(sec_bus, pci_bus_num(sec_bus),
> -                        s390_pci_enumerate_bridge, s);
> +    pci_for_each_device_under_bus(sec_bus, s390_pci_enumerate_bridge, s);
>      pci_default_write_config(pdev, PCI_SUBORDINATE_BUS, s->bus_no, 1);
>  }
>  
> @@ -1193,7 +1192,7 @@ static void s390_pcihost_reset(DeviceState *dev)
>       * on every system reset, we also have to reassign numbers.
>       */
>      s->bus_no = 0;
> -    pci_for_each_device(bus, pci_bus_num(bus), s390_pci_enumerate_bridge, s);
> +    pci_for_each_device_under_bus(bus, s390_pci_enumerate_bridge, s);
>  }
>  
>  static void s390_pcihost_class_init(ObjectClass *klass, void *data)
> diff --git a/hw/xen/xen_pt.c b/hw/xen/xen_pt.c
> index ca0a98187e..027190fa44 100644
> --- a/hw/xen/xen_pt.c
> +++ b/hw/xen/xen_pt.c
> @@ -615,8 +615,8 @@ static void xen_pt_region_update(XenPCIPassthroughState *s,
>      }
>  
>      args.type = d->io_regions[bar].type;
> -    pci_for_each_device(pci_get_bus(d), pci_dev_bus_num(d),
> -                        xen_pt_check_bar_overlap, &args);
> +    pci_for_each_device_under_bus(pci_get_bus(d),
> +                                  xen_pt_check_bar_overlap, &args);
>      if (args.rc) {
>          XEN_PT_WARN(d, "Region: %d (addr: 0x%"FMT_PCIBUS
>                      ", len: 0x%"FMT_PCIBUS") is overlapped.\n",
Maybe squash with the previous one?

Besides
Reviewed-by: Eric Auger <eric.auger@redhat.com>

Eric



  parent reply	other threads:[~2021-10-21 11:35 UTC|newest]

Thread overview: 44+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-10-21 10:42 [PATCH 0/8] pci/iommu: Fail early if vfio-pci detected before vIOMMU Peter Xu
2021-10-21 10:42 ` [PATCH 1/8] pci: Define pci_bus_dev_fn type Peter Xu
2021-10-21 10:53   ` David Hildenbrand
2021-10-21 11:15   ` Eric Auger
2021-10-22  2:16     ` Peter Xu
2021-10-21 11:36   ` Philippe Mathieu-Daudé
2021-10-21 10:42 ` [PATCH 2/8] pci: Export pci_for_each_device_under_bus*() Peter Xu
2021-10-21 10:54   ` David Hildenbrand
2021-10-21 11:32   ` Eric Auger
2021-10-21 11:39   ` Philippe Mathieu-Daudé
2021-10-21 10:42 ` [PATCH 3/8] pci: Use pci_for_each_device_under_bus*() Peter Xu
2021-10-21 10:56   ` David Hildenbrand
2021-10-21 11:34   ` Eric Auger [this message]
2021-10-22  2:19     ` Peter Xu
2021-10-21 10:42 ` [PATCH 4/8] pci: Define pci_bus_fn/pci_bus_ret_fn type Peter Xu
2021-10-21 10:57   ` David Hildenbrand
2021-10-21 11:37   ` Eric Auger
2021-10-21 11:44   ` Philippe Mathieu-Daudé
2021-10-21 12:54     ` Philippe Mathieu-Daudé
2021-10-22  2:24       ` Peter Xu
2021-10-21 10:42 ` [PATCH 5/8] pci: Add pci_for_each_root_bus() Peter Xu
2021-10-21 11:00   ` David Hildenbrand
2021-10-21 12:22   ` Eric Auger
2021-10-25 13:16   ` Michael S. Tsirkin
2021-10-28  2:56     ` Peter Xu
2021-10-21 10:42 ` [PATCH 6/8] pci: Use pci_for_each_root_bus() in current code Peter Xu
2021-10-21 11:06   ` David Hildenbrand
2021-10-21 12:28   ` Eric Auger
2021-10-21 10:42 ` [PATCH 7/8] pci: Add pci_for_each_device_all() Peter Xu
2021-10-21 10:54   ` Michael S. Tsirkin
2021-10-22  2:33     ` Peter Xu
2021-10-22  8:43       ` Michael S. Tsirkin
2021-10-25 12:57         ` Peter Xu
2021-10-25 13:13           ` Michael S. Tsirkin
2021-10-21 10:42 ` [PATCH 8/8] x86-iommu: Fail early if vIOMMU specified after vfio-pci Peter Xu
2021-10-21 10:49   ` Michael S. Tsirkin
2021-10-21 12:38   ` Eric Auger
2021-10-22  2:37     ` Peter Xu
2021-10-21 22:30   ` Alex Williamson
2021-10-22  2:14     ` Peter Xu
2021-10-26 15:11       ` Igor Mammedov
2021-10-26 15:38         ` Alex Williamson
2021-10-27  8:30         ` Peter Xu
2021-10-28  2:30           ` Peter Xu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=f1bdd887-975f-8d23-e933-39b95843c2b1@redhat.com \
    --to=eric.auger@redhat.com \
    --cc=alex.williamson@redhat.com \
    --cc=armbru@redhat.com \
    --cc=berrange@redhat.com \
    --cc=david@gibson.dropbear.id.au \
    --cc=david@redhat.com \
    --cc=ehabkost@redhat.com \
    --cc=imammedo@redhat.com \
    --cc=jasowang@redhat.com \
    --cc=mst@redhat.com \
    --cc=pbonzini@redhat.com \
    --cc=peter.maydell@linaro.org \
    --cc=peterx@redhat.com \
    --cc=qemu-devel@nongnu.org \
    --cc=shannon.zhaosl@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).