QEMU-Devel Archive on lore.kernel.org
 help / color / Atom feed
From: Tony Nguyen <tony.nguyen@bt.com>
To: qemu-devel@nongnu.org
Cc: "Tony Nguyen" <tony.nguyen@bt.com>,
	"Peter Maydell" <peter.maydell@linaro.org>,
	"Mark Cave-Ayland" <mark.cave-ayland@ilande.co.uk>,
	"Philippe Mathieu-Daudé" <f4bug@amsat.org>,
	"Andrew Baumann" <Andrew.Baumann@microsoft.com>,
	qemu-arm@nongnu.org,
	"Edgar E. Iglesias" <edgar.iglesias@gmail.com>,
	"Guan Xuetao" <gxt@mprc.pku.edu.cn>
Subject: [Qemu-devel] [RFC PATCH 05/17] hw/dma: Declare device little or big endian
Date: Sat, 24 Aug 2019 04:56:26 +1000
Message-ID: <f20c9b60988b1693ccdfbdd4dd34bfc079120895.1566467963.git.tony.nguyen@bt.com> (raw)
In-Reply-To: <cover.1566467963.git.tony.nguyen@bt.com>

For each device declared with DEVICE_NATIVE_ENDIAN, find the set of
targets from the set of target/hw/*/device.o.

If the set of targets are all little or all big endian, re-declare
the device endianness as DEVICE_LITTLE_ENDIAN or DEVICE_BIG_ENDIAN
respectively.

This *naive* deduction may result in genuinely native endian devices
being incorrectly declared as little or big endian, but should not
introduce regressions for current targets.

These devices should be re-declared as DEVICE_NATIVE_ENDIAN if 1) it
has a new target with an opposite endian or 2) someone informed knows
better =)

Signed-off-by: Tony Nguyen <tony.nguyen@bt.com>
---
 hw/dma/bcm2835_dma.c | 4 ++--
 hw/dma/etraxfs_dma.c | 2 +-
 hw/dma/pl080.c       | 2 +-
 hw/dma/pl330.c       | 2 +-
 hw/dma/puv3_dma.c    | 2 +-
 hw/dma/sparc32_dma.c | 2 +-
 6 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/hw/dma/bcm2835_dma.c b/hw/dma/bcm2835_dma.c
index 192bd377a0..550e67f686 100644
--- a/hw/dma/bcm2835_dma.c
+++ b/hw/dma/bcm2835_dma.c
@@ -290,7 +290,7 @@ static void bcm2835_dma15_write(void *opaque, hwaddr offset, uint64_t value,
 static const MemoryRegionOps bcm2835_dma0_ops = {
     .read = bcm2835_dma0_read,
     .write = bcm2835_dma0_write,
-    .endianness = DEVICE_NATIVE_ENDIAN,
+    .endianness = DEVICE_LITTLE_ENDIAN,
     .valid.min_access_size = 4,
     .valid.max_access_size = 4,
 };
@@ -298,7 +298,7 @@ static const MemoryRegionOps bcm2835_dma0_ops = {
 static const MemoryRegionOps bcm2835_dma15_ops = {
     .read = bcm2835_dma15_read,
     .write = bcm2835_dma15_write,
-    .endianness = DEVICE_NATIVE_ENDIAN,
+    .endianness = DEVICE_LITTLE_ENDIAN,
     .valid.min_access_size = 4,
     .valid.max_access_size = 4,
 };
diff --git a/hw/dma/etraxfs_dma.c b/hw/dma/etraxfs_dma.c
index 47e1c6df12..b4e3f83ca4 100644
--- a/hw/dma/etraxfs_dma.c
+++ b/hw/dma/etraxfs_dma.c
@@ -700,7 +700,7 @@ dma_write(void *opaque, hwaddr addr,
 static const MemoryRegionOps dma_ops = {
 	.read = dma_read,
 	.write = dma_write,
-	.endianness = DEVICE_NATIVE_ENDIAN,
+	.endianness = DEVICE_LITTLE_ENDIAN,
 	.valid = {
 		.min_access_size = 1,
 		.max_access_size = 4
diff --git a/hw/dma/pl080.c b/hw/dma/pl080.c
index 52ba23f4bf..cbdd1849cd 100644
--- a/hw/dma/pl080.c
+++ b/hw/dma/pl080.c
@@ -350,7 +350,7 @@ static void pl080_write(void *opaque, hwaddr offset,
 static const MemoryRegionOps pl080_ops = {
     .read = pl080_read,
     .write = pl080_write,
-    .endianness = DEVICE_NATIVE_ENDIAN,
+    .endianness = DEVICE_LITTLE_ENDIAN,
 };
 
 static void pl080_reset(DeviceState *dev)
diff --git a/hw/dma/pl330.c b/hw/dma/pl330.c
index f2bb2d9ac1..a9216680ef 100644
--- a/hw/dma/pl330.c
+++ b/hw/dma/pl330.c
@@ -1496,7 +1496,7 @@ static uint64_t pl330_iomem_read(void *opaque, hwaddr offset,
 static const MemoryRegionOps pl330_ops = {
     .read = pl330_iomem_read,
     .write = pl330_iomem_write,
-    .endianness = DEVICE_NATIVE_ENDIAN,
+    .endianness = DEVICE_LITTLE_ENDIAN,
     .impl = {
         .min_access_size = 4,
         .max_access_size = 4,
diff --git a/hw/dma/puv3_dma.c b/hw/dma/puv3_dma.c
index 5488d388a9..1577056715 100644
--- a/hw/dma/puv3_dma.c
+++ b/hw/dma/puv3_dma.c
@@ -74,7 +74,7 @@ static const MemoryRegionOps puv3_dma_ops = {
         .min_access_size = 4,
         .max_access_size = 4,
     },
-    .endianness = DEVICE_NATIVE_ENDIAN,
+    .endianness = DEVICE_LITTLE_ENDIAN,
 };
 
 static void puv3_dma_realize(DeviceState *dev, Error **errp)
diff --git a/hw/dma/sparc32_dma.c b/hw/dma/sparc32_dma.c
index 0e5bbcdc7f..bf76f2e558 100644
--- a/hw/dma/sparc32_dma.c
+++ b/hw/dma/sparc32_dma.c
@@ -226,7 +226,7 @@ static void dma_mem_write(void *opaque, hwaddr addr,
 static const MemoryRegionOps dma_mem_ops = {
     .read = dma_mem_read,
     .write = dma_mem_write,
-    .endianness = DEVICE_NATIVE_ENDIAN,
+    .endianness = DEVICE_BIG_ENDIAN,
     .valid = {
         .min_access_size = 4,
         .max_access_size = 4,
-- 
2.23.0



  parent reply index

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-08-23 18:56 [Qemu-devel] [RFC PATCH 00/17] " Tony Nguyen
2019-08-23 18:56 ` [Qemu-devel] [RFC PATCH 01/17] hw/audio: " Tony Nguyen
2019-08-23 18:56 ` [Qemu-devel] [RFC PATCH 02/17] hw/block: " Tony Nguyen
2019-08-23 18:56 ` [Qemu-devel] [RFC PATCH 03/17] hw/char: " Tony Nguyen
2019-08-23 18:56 ` [Qemu-devel] [RFC PATCH 04/17] hw/display: " Tony Nguyen
2019-08-23 18:56 ` Tony Nguyen [this message]
2019-08-23 18:56 ` [Qemu-devel] [RFC PATCH 06/17] hw/gpio: " Tony Nguyen
2019-08-23 18:56 ` [Qemu-devel] [RFC PATCH 07/17] hw/i2c: " Tony Nguyen
2019-08-24  9:27   ` David Gibson
2019-08-23 18:56 ` [Qemu-devel] [RFC PATCH 08/17] hw/input: " Tony Nguyen
2019-08-23 18:56 ` [Qemu-devel] [RFC PATCH 09/17] hw/intc: " Tony Nguyen
2019-08-23 18:56 ` [Qemu-devel] [RFC PATCH 10/17] hw/isa: " Tony Nguyen
2019-08-23 18:56 ` [Qemu-devel] [RFC PATCH 11/17] hw/misc: " Tony Nguyen
2019-08-23 18:56 ` [Qemu-devel] [RFC PATCH 12/17] hw/net: " Tony Nguyen
2019-08-23 18:56 ` [Qemu-devel] [RFC PATCH 13/17] hw/pci-host: " Tony Nguyen
2019-08-23 18:56 ` [Qemu-devel] [RFC PATCH 14/17] hw/sd: " Tony Nguyen
2019-08-23 18:56 ` [Qemu-devel] [RFC PATCH 15/17] hw/ssi: " Tony Nguyen
2019-08-23 18:56 ` [Qemu-devel] [RFC PATCH 16/17] hw/timer: " Tony Nguyen
2019-08-23 18:56 ` [Qemu-devel] [RFC PATCH 17/17] build: Correct non-common common-obj-* to obj-* Tony Nguyen
2019-08-23 20:05   ` Paolo Bonzini
2019-08-23 19:42 ` [Qemu-devel] [RFC PATCH 00/17] Declare device little or big endian no-reply

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=f20c9b60988b1693ccdfbdd4dd34bfc079120895.1566467963.git.tony.nguyen@bt.com \
    --to=tony.nguyen@bt.com \
    --cc=Andrew.Baumann@microsoft.com \
    --cc=edgar.iglesias@gmail.com \
    --cc=f4bug@amsat.org \
    --cc=gxt@mprc.pku.edu.cn \
    --cc=mark.cave-ayland@ilande.co.uk \
    --cc=peter.maydell@linaro.org \
    --cc=qemu-arm@nongnu.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

QEMU-Devel Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/qemu-devel/0 qemu-devel/git/0.git
	git clone --mirror https://lore.kernel.org/qemu-devel/1 qemu-devel/git/1.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 qemu-devel qemu-devel/ https://lore.kernel.org/qemu-devel \
		qemu-devel@nongnu.org qemu-devel@archiver.kernel.org
	public-inbox-index qemu-devel

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.nongnu.qemu-devel


AGPL code for this site: git clone https://public-inbox.org/ public-inbox