From: Jungseok Lee <jays.lee@samsung.com> To: linux-arm-kernel@lists.infradead.org, kvmarm@lists.cs.columbia.edu, Catalin.Marinas@arm.com, Marc Zyngier <Marc.Zyngier@arm.com>, Christoffer Dall <christoffer.dall@linaro.org> Cc: linux-kernel@vger.kernel.org, linux-samsung-soc <linux-samsung-soc@vger.kernel.org>, steve.capper@linaro.org, sungjinn.chung@samsung.com, Arnd Bergmann <arnd@arndb.de>, kgene.kim@samsung.com, ilho215.lee@samsung.com Subject: [PATCH v6 6/7] arm64: KVM: Set physical address size related factors in runtime Date: Mon, 12 May 2014 18:40:54 +0900 [thread overview] Message-ID: <000501cf6dc6$44fac0f0$cef042d0$@samsung.com> (raw) This patch sets TCR_EL2.PS, VTCR_EL2.T0SZ and vttbr_baddr_mask in runtime, not compile time. In ARMv8, EL2 physical address size (TCR_EL2.PS) and stage2 input address size (VTCR_EL2.T0SZE) cannot be determined in compile time since they depends on hardware capability. According to Table D4-23 and Table D4-25 in ARM DDI 0487A.b document, vttbr_x is calculated using different hard-coded values with consideration of T0SZ, granule size and the level of translation tables. Therefore, vttbr_baddr_mask should be determined dynamically. Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Jungseok Lee <jays.lee@samsung.com> Reviewed-by: Sungjinn Chung <sungjinn.chung@samsung.com> --- arch/arm/kvm/arm.c | 82 +++++++++++++++++++++++++++++++++++++- arch/arm64/include/asm/kvm_arm.h | 17 ++------ arch/arm64/kvm/hyp-init.S | 20 +++++++--- 3 files changed, 98 insertions(+), 21 deletions(-) diff --git a/arch/arm/kvm/arm.c b/arch/arm/kvm/arm.c index f0e50a0..9f19f2c 100644 --- a/arch/arm/kvm/arm.c +++ b/arch/arm/kvm/arm.c @@ -37,6 +37,7 @@ #include <asm/mman.h> #include <asm/tlbflush.h> #include <asm/cacheflush.h> +#include <asm/cputype.h> #include <asm/virt.h> #include <asm/kvm_arm.h> #include <asm/kvm_asm.h> @@ -61,6 +62,9 @@ static atomic64_t kvm_vmid_gen = ATOMIC64_INIT(1); static u8 kvm_next_vmid; static DEFINE_SPINLOCK(kvm_vmid_lock); +/* VTTBR mask cannot be determined in complie time under ARMv8 */ +static u64 vttbr_baddr_mask; + static bool vgic_present; static void kvm_arm_set_running_vcpu(struct kvm_vcpu *vcpu) @@ -412,6 +416,75 @@ static bool need_new_vmid_gen(struct kvm *kvm) } /** + * set_vttbr_baddr_mask - set mask value for vttbr base address + * + * In ARMv8, vttbr_baddr_mask cannot be determined in compile time since stage2 + * input address size depends on hardware capability. Thus, it is needed to read + * ID_AA64MMFR0_EL1.PARange first and then set vttbr_baddr_mask with consideration + * of both granule size and the level of translation tables. + */ +static int set_vttbr_baddr_mask(void) +{ +#ifndef CONFIG_ARM64 + vttbr_baddr_mask = VTTBR_BADDR_MASK; +#else + int pa_range, t0sz, vttbr_x; + + pa_range = read_cpuid(ID_AA64MMFR0_EL1) & 0xf; + + switch (pa_range) { + case 0: + t0sz = VTCR_EL2_T0SZ(32); + break; + case 1: + t0sz = VTCR_EL2_T0SZ(36); + break; + case 2: + t0sz = VTCR_EL2_T0SZ(40); + break; + case 3: + t0sz = VTCR_EL2_T0SZ(42); + break; + case 4: + t0sz = VTCR_EL2_T0SZ(44); + break; + default: + t0sz = VTCR_EL2_T0SZ(48); + } + + /* + * See Table D4-23 and Table D4-25 in ARM DDI 0487A.b to figure out + * the origin of the hardcoded values, 38 and 37. + */ +#ifdef CONFIG_ARM64_64K_PAGES + /* + * 16 <= T0SZ <= 21 is valid under 3 level of translation tables + * 18 <= T0SZ <= 34 is valid under 2 level of translation tables + * 31 <= T0SZ <= 39 is valid under 1 level of transltaion tables + */ + if (t0sz <= 17) { + kvm_err("Cannot support %d-bit address space\n", 64 - t0sz); + return -EINVAL; + } + vttbr_x = 38 - t0sz; +#else + /* + * 16 <= T0SZ <= 24 is valid under 4 level of translation tables + * 21 <= T0SZ <= 30 is valid under 3 level of translation tables + * 30 <= T0SZ <= 39 is valid under 2 level of translation tables + */ + if (t0sz <= 20) { + kvm_err("Cannot support %d-bit address space\n", 64 - t0sz); + return -EINVAL; + } + vttbr_x = 37 - t0sz; +#endif + vttbr_baddr_mask = (((1LLU << (48 - vttbr_x)) - 1) << (vttbr_x - 1)); +#endif + return 0; +} + +/** * update_vttbr - Update the VTTBR with a valid VMID before the guest runs * @kvm The guest that we are about to run * @@ -465,7 +538,7 @@ static void update_vttbr(struct kvm *kvm) /* update vttbr to be used with the new vmid */ pgd_phys = virt_to_phys(kvm->arch.pgd); vmid = ((u64)(kvm->arch.vmid) << VTTBR_VMID_SHIFT) & VTTBR_VMID_MASK; - kvm->arch.vttbr = pgd_phys & VTTBR_BADDR_MASK; + kvm->arch.vttbr = pgd_phys & vttbr_baddr_mask; kvm->arch.vttbr |= vmid; spin_unlock(&kvm_vmid_lock); @@ -1051,6 +1124,12 @@ int kvm_arch_init(void *opaque) } } + err = set_vttbr_baddr_mask(); + if (err) { + kvm_err("Cannot set vttbr_baddr_mask\n"); + return -EINVAL; + } + cpu_notifier_register_begin(); err = init_hyp_mode(); @@ -1068,6 +1147,7 @@ int kvm_arch_init(void *opaque) hyp_cpu_pm_init(); kvm_coproc_table_init(); + return 0; out_err: cpu_notifier_register_done(); diff --git a/arch/arm64/include/asm/kvm_arm.h b/arch/arm64/include/asm/kvm_arm.h index 3d69030..8dbef70 100644 --- a/arch/arm64/include/asm/kvm_arm.h +++ b/arch/arm64/include/asm/kvm_arm.h @@ -94,7 +94,6 @@ /* TCR_EL2 Registers bits */ #define TCR_EL2_TBI (1 << 20) #define TCR_EL2_PS (7 << 16) -#define TCR_EL2_PS_40B (2 << 16) #define TCR_EL2_TG0 (1 << 14) #define TCR_EL2_SH0 (3 << 12) #define TCR_EL2_ORGN0 (3 << 10) @@ -103,8 +102,6 @@ #define TCR_EL2_MASK (TCR_EL2_TG0 | TCR_EL2_SH0 | \ TCR_EL2_ORGN0 | TCR_EL2_IRGN0 | TCR_EL2_T0SZ) -#define TCR_EL2_FLAGS (TCR_EL2_PS_40B) - /* VTCR_EL2 Registers bits */ #define VTCR_EL2_PS_MASK (7 << 16) #define VTCR_EL2_TG0_MASK (1 << 14) @@ -119,36 +116,28 @@ #define VTCR_EL2_SL0_MASK (3 << 6) #define VTCR_EL2_SL0_LVL1 (1 << 6) #define VTCR_EL2_T0SZ_MASK 0x3f -#define VTCR_EL2_T0SZ_40B 24 +#define VTCR_EL2_T0SZ(bits) (64 - (bits)) #ifdef CONFIG_ARM64_64K_PAGES /* * Stage2 translation configuration: - * 40bits output (PS = 2) - * 40bits input (T0SZ = 24) * 64kB pages (TG0 = 1) * 2 level page tables (SL = 1) */ #define VTCR_EL2_FLAGS (VTCR_EL2_TG0_64K | VTCR_EL2_SH0_INNER | \ VTCR_EL2_ORGN0_WBWA | VTCR_EL2_IRGN0_WBWA | \ - VTCR_EL2_SL0_LVL1 | VTCR_EL2_T0SZ_40B) -#define VTTBR_X (38 - VTCR_EL2_T0SZ_40B) + VTCR_EL2_SL0_LVL1) #else /* * Stage2 translation configuration: - * 40bits output (PS = 2) - * 40bits input (T0SZ = 24) * 4kB pages (TG0 = 0) * 3 level page tables (SL = 1) */ #define VTCR_EL2_FLAGS (VTCR_EL2_TG0_4K | VTCR_EL2_SH0_INNER | \ VTCR_EL2_ORGN0_WBWA | VTCR_EL2_IRGN0_WBWA | \ - VTCR_EL2_SL0_LVL1 | VTCR_EL2_T0SZ_40B) -#define VTTBR_X (37 - VTCR_EL2_T0SZ_40B) + VTCR_EL2_SL0_LVL1) #endif -#define VTTBR_BADDR_SHIFT (VTTBR_X - 1) -#define VTTBR_BADDR_MASK (((1LLU << (40 - VTTBR_X)) - 1) << VTTBR_BADDR_SHIFT) #define VTTBR_VMID_SHIFT (48LLU) #define VTTBR_VMID_MASK (0xffLLU << VTTBR_VMID_SHIFT) diff --git a/arch/arm64/kvm/hyp-init.S b/arch/arm64/kvm/hyp-init.S index d968796..c0f7634 100644 --- a/arch/arm64/kvm/hyp-init.S +++ b/arch/arm64/kvm/hyp-init.S @@ -63,17 +63,21 @@ __do_hyp_init: mrs x4, tcr_el1 ldr x5, =TCR_EL2_MASK and x4, x4, x5 - ldr x5, =TCR_EL2_FLAGS - orr x4, x4, x5 - msr tcr_el2, x4 - - ldr x4, =VTCR_EL2_FLAGS /* * Read the PARange bits from ID_AA64MMFR0_EL1 and set the PS bits in - * VTCR_EL2. + * TCR_EL2 and both PS bits and T0SZ bits in VTCR_EL2. */ mrs x5, ID_AA64MMFR0_EL1 bfi x4, x5, #16, #3 + msr tcr_el2, x4 + + ldr x4, =VTCR_EL2_FLAGS + bfi x4, x5, #16, #3 + and x5, x5, #0xf + adr x6, t0sz + add x6, x6, x5, lsl #2 + ldr w5, [x6] + orr x4, x4, x5 msr vtcr_el2, x4 mrs x4, mair_el1 @@ -109,6 +113,10 @@ target: /* We're now in the trampoline code, switch page tables */ /* Hello, World! */ eret + +t0sz: + .word VTCR_EL2_T0SZ(32), VTCR_EL2_T0SZ(36), VTCR_EL2_T0SZ(40) + .word VTCR_EL2_T0SZ(42), VTCR_EL2_T0SZ(44), VTCR_EL2_T0SZ(48) ENDPROC(__kvm_hyp_init) .ltorg -- 1.7.10.4
WARNING: multiple messages have this Message-ID (diff)
From: jays.lee@samsung.com (Jungseok Lee) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH v6 6/7] arm64: KVM: Set physical address size related factors in runtime Date: Mon, 12 May 2014 18:40:54 +0900 [thread overview] Message-ID: <000501cf6dc6$44fac0f0$cef042d0$@samsung.com> (raw) This patch sets TCR_EL2.PS, VTCR_EL2.T0SZ and vttbr_baddr_mask in runtime, not compile time. In ARMv8, EL2 physical address size (TCR_EL2.PS) and stage2 input address size (VTCR_EL2.T0SZE) cannot be determined in compile time since they depends on hardware capability. According to Table D4-23 and Table D4-25 in ARM DDI 0487A.b document, vttbr_x is calculated using different hard-coded values with consideration of T0SZ, granule size and the level of translation tables. Therefore, vttbr_baddr_mask should be determined dynamically. Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Jungseok Lee <jays.lee@samsung.com> Reviewed-by: Sungjinn Chung <sungjinn.chung@samsung.com> --- arch/arm/kvm/arm.c | 82 +++++++++++++++++++++++++++++++++++++- arch/arm64/include/asm/kvm_arm.h | 17 ++------ arch/arm64/kvm/hyp-init.S | 20 +++++++--- 3 files changed, 98 insertions(+), 21 deletions(-) diff --git a/arch/arm/kvm/arm.c b/arch/arm/kvm/arm.c index f0e50a0..9f19f2c 100644 --- a/arch/arm/kvm/arm.c +++ b/arch/arm/kvm/arm.c @@ -37,6 +37,7 @@ #include <asm/mman.h> #include <asm/tlbflush.h> #include <asm/cacheflush.h> +#include <asm/cputype.h> #include <asm/virt.h> #include <asm/kvm_arm.h> #include <asm/kvm_asm.h> @@ -61,6 +62,9 @@ static atomic64_t kvm_vmid_gen = ATOMIC64_INIT(1); static u8 kvm_next_vmid; static DEFINE_SPINLOCK(kvm_vmid_lock); +/* VTTBR mask cannot be determined in complie time under ARMv8 */ +static u64 vttbr_baddr_mask; + static bool vgic_present; static void kvm_arm_set_running_vcpu(struct kvm_vcpu *vcpu) @@ -412,6 +416,75 @@ static bool need_new_vmid_gen(struct kvm *kvm) } /** + * set_vttbr_baddr_mask - set mask value for vttbr base address + * + * In ARMv8, vttbr_baddr_mask cannot be determined in compile time since stage2 + * input address size depends on hardware capability. Thus, it is needed to read + * ID_AA64MMFR0_EL1.PARange first and then set vttbr_baddr_mask with consideration + * of both granule size and the level of translation tables. + */ +static int set_vttbr_baddr_mask(void) +{ +#ifndef CONFIG_ARM64 + vttbr_baddr_mask = VTTBR_BADDR_MASK; +#else + int pa_range, t0sz, vttbr_x; + + pa_range = read_cpuid(ID_AA64MMFR0_EL1) & 0xf; + + switch (pa_range) { + case 0: + t0sz = VTCR_EL2_T0SZ(32); + break; + case 1: + t0sz = VTCR_EL2_T0SZ(36); + break; + case 2: + t0sz = VTCR_EL2_T0SZ(40); + break; + case 3: + t0sz = VTCR_EL2_T0SZ(42); + break; + case 4: + t0sz = VTCR_EL2_T0SZ(44); + break; + default: + t0sz = VTCR_EL2_T0SZ(48); + } + + /* + * See Table D4-23 and Table D4-25 in ARM DDI 0487A.b to figure out + * the origin of the hardcoded values, 38 and 37. + */ +#ifdef CONFIG_ARM64_64K_PAGES + /* + * 16 <= T0SZ <= 21 is valid under 3 level of translation tables + * 18 <= T0SZ <= 34 is valid under 2 level of translation tables + * 31 <= T0SZ <= 39 is valid under 1 level of transltaion tables + */ + if (t0sz <= 17) { + kvm_err("Cannot support %d-bit address space\n", 64 - t0sz); + return -EINVAL; + } + vttbr_x = 38 - t0sz; +#else + /* + * 16 <= T0SZ <= 24 is valid under 4 level of translation tables + * 21 <= T0SZ <= 30 is valid under 3 level of translation tables + * 30 <= T0SZ <= 39 is valid under 2 level of translation tables + */ + if (t0sz <= 20) { + kvm_err("Cannot support %d-bit address space\n", 64 - t0sz); + return -EINVAL; + } + vttbr_x = 37 - t0sz; +#endif + vttbr_baddr_mask = (((1LLU << (48 - vttbr_x)) - 1) << (vttbr_x - 1)); +#endif + return 0; +} + +/** * update_vttbr - Update the VTTBR with a valid VMID before the guest runs * @kvm The guest that we are about to run * @@ -465,7 +538,7 @@ static void update_vttbr(struct kvm *kvm) /* update vttbr to be used with the new vmid */ pgd_phys = virt_to_phys(kvm->arch.pgd); vmid = ((u64)(kvm->arch.vmid) << VTTBR_VMID_SHIFT) & VTTBR_VMID_MASK; - kvm->arch.vttbr = pgd_phys & VTTBR_BADDR_MASK; + kvm->arch.vttbr = pgd_phys & vttbr_baddr_mask; kvm->arch.vttbr |= vmid; spin_unlock(&kvm_vmid_lock); @@ -1051,6 +1124,12 @@ int kvm_arch_init(void *opaque) } } + err = set_vttbr_baddr_mask(); + if (err) { + kvm_err("Cannot set vttbr_baddr_mask\n"); + return -EINVAL; + } + cpu_notifier_register_begin(); err = init_hyp_mode(); @@ -1068,6 +1147,7 @@ int kvm_arch_init(void *opaque) hyp_cpu_pm_init(); kvm_coproc_table_init(); + return 0; out_err: cpu_notifier_register_done(); diff --git a/arch/arm64/include/asm/kvm_arm.h b/arch/arm64/include/asm/kvm_arm.h index 3d69030..8dbef70 100644 --- a/arch/arm64/include/asm/kvm_arm.h +++ b/arch/arm64/include/asm/kvm_arm.h @@ -94,7 +94,6 @@ /* TCR_EL2 Registers bits */ #define TCR_EL2_TBI (1 << 20) #define TCR_EL2_PS (7 << 16) -#define TCR_EL2_PS_40B (2 << 16) #define TCR_EL2_TG0 (1 << 14) #define TCR_EL2_SH0 (3 << 12) #define TCR_EL2_ORGN0 (3 << 10) @@ -103,8 +102,6 @@ #define TCR_EL2_MASK (TCR_EL2_TG0 | TCR_EL2_SH0 | \ TCR_EL2_ORGN0 | TCR_EL2_IRGN0 | TCR_EL2_T0SZ) -#define TCR_EL2_FLAGS (TCR_EL2_PS_40B) - /* VTCR_EL2 Registers bits */ #define VTCR_EL2_PS_MASK (7 << 16) #define VTCR_EL2_TG0_MASK (1 << 14) @@ -119,36 +116,28 @@ #define VTCR_EL2_SL0_MASK (3 << 6) #define VTCR_EL2_SL0_LVL1 (1 << 6) #define VTCR_EL2_T0SZ_MASK 0x3f -#define VTCR_EL2_T0SZ_40B 24 +#define VTCR_EL2_T0SZ(bits) (64 - (bits)) #ifdef CONFIG_ARM64_64K_PAGES /* * Stage2 translation configuration: - * 40bits output (PS = 2) - * 40bits input (T0SZ = 24) * 64kB pages (TG0 = 1) * 2 level page tables (SL = 1) */ #define VTCR_EL2_FLAGS (VTCR_EL2_TG0_64K | VTCR_EL2_SH0_INNER | \ VTCR_EL2_ORGN0_WBWA | VTCR_EL2_IRGN0_WBWA | \ - VTCR_EL2_SL0_LVL1 | VTCR_EL2_T0SZ_40B) -#define VTTBR_X (38 - VTCR_EL2_T0SZ_40B) + VTCR_EL2_SL0_LVL1) #else /* * Stage2 translation configuration: - * 40bits output (PS = 2) - * 40bits input (T0SZ = 24) * 4kB pages (TG0 = 0) * 3 level page tables (SL = 1) */ #define VTCR_EL2_FLAGS (VTCR_EL2_TG0_4K | VTCR_EL2_SH0_INNER | \ VTCR_EL2_ORGN0_WBWA | VTCR_EL2_IRGN0_WBWA | \ - VTCR_EL2_SL0_LVL1 | VTCR_EL2_T0SZ_40B) -#define VTTBR_X (37 - VTCR_EL2_T0SZ_40B) + VTCR_EL2_SL0_LVL1) #endif -#define VTTBR_BADDR_SHIFT (VTTBR_X - 1) -#define VTTBR_BADDR_MASK (((1LLU << (40 - VTTBR_X)) - 1) << VTTBR_BADDR_SHIFT) #define VTTBR_VMID_SHIFT (48LLU) #define VTTBR_VMID_MASK (0xffLLU << VTTBR_VMID_SHIFT) diff --git a/arch/arm64/kvm/hyp-init.S b/arch/arm64/kvm/hyp-init.S index d968796..c0f7634 100644 --- a/arch/arm64/kvm/hyp-init.S +++ b/arch/arm64/kvm/hyp-init.S @@ -63,17 +63,21 @@ __do_hyp_init: mrs x4, tcr_el1 ldr x5, =TCR_EL2_MASK and x4, x4, x5 - ldr x5, =TCR_EL2_FLAGS - orr x4, x4, x5 - msr tcr_el2, x4 - - ldr x4, =VTCR_EL2_FLAGS /* * Read the PARange bits from ID_AA64MMFR0_EL1 and set the PS bits in - * VTCR_EL2. + * TCR_EL2 and both PS bits and T0SZ bits in VTCR_EL2. */ mrs x5, ID_AA64MMFR0_EL1 bfi x4, x5, #16, #3 + msr tcr_el2, x4 + + ldr x4, =VTCR_EL2_FLAGS + bfi x4, x5, #16, #3 + and x5, x5, #0xf + adr x6, t0sz + add x6, x6, x5, lsl #2 + ldr w5, [x6] + orr x4, x4, x5 msr vtcr_el2, x4 mrs x4, mair_el1 @@ -109,6 +113,10 @@ target: /* We're now in the trampoline code, switch page tables */ /* Hello, World! */ eret + +t0sz: + .word VTCR_EL2_T0SZ(32), VTCR_EL2_T0SZ(36), VTCR_EL2_T0SZ(40) + .word VTCR_EL2_T0SZ(42), VTCR_EL2_T0SZ(44), VTCR_EL2_T0SZ(48) ENDPROC(__kvm_hyp_init) .ltorg -- 1.7.10.4
next reply other threads:[~2014-05-12 9:41 UTC|newest] Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top 2014-05-12 9:40 Jungseok Lee [this message] 2014-05-12 9:40 ` [PATCH v6 6/7] arm64: KVM: Set physical address size related factors in runtime Jungseok Lee 2014-05-27 13:53 ` Christoffer Dall 2014-05-27 13:53 ` Christoffer Dall 2014-05-27 14:02 ` Christoffer Dall 2014-05-27 14:02 ` Christoffer Dall 2014-06-02 8:11 ` Jungseok Lee 2014-06-02 8:11 ` Jungseok Lee 2014-06-04 13:11 ` Christoffer Dall 2014-06-04 13:11 ` Christoffer Dall 2014-06-02 7:52 ` Jungseok Lee 2014-06-02 7:52 ` Jungseok Lee
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to='000501cf6dc6$44fac0f0$cef042d0$@samsung.com' \ --to=jays.lee@samsung.com \ --cc=Catalin.Marinas@arm.com \ --cc=Marc.Zyngier@arm.com \ --cc=arnd@arndb.de \ --cc=christoffer.dall@linaro.org \ --cc=ilho215.lee@samsung.com \ --cc=kgene.kim@samsung.com \ --cc=kvmarm@lists.cs.columbia.edu \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-samsung-soc@vger.kernel.org \ --cc=steve.capper@linaro.org \ --cc=sungjinn.chung@samsung.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.