All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jingoo Han <jg1.han@samsung.com>
To: linux-arm-kernel@lists.infradead.org, linux-samsung-soc@vger.kernel.org
Cc: 'Kishon Vijay Abraham I' <kishon@ti.com>,
	linux-media@vger.kernel.org, 'Kukjin Kim' <kgene.kim@samsung.com>,
	'Sylwester Nawrocki' <s.nawrocki@samsung.com>,
	'Felipe Balbi' <balbi@ti.com>, 'Tomasz Figa' <t.figa@samsung.com>,
	devicetree-discuss@lists.ozlabs.org,
	'Inki Dae' <inki.dae@samsung.com>,
	'Donghwa Lee' <dh09.lee@samsung.com>,
	'Kyungmin Park' <kyungmin.park@samsung.com>,
	'Jean-Christophe PLAGNIOL-VILLARD' <plagnioj@jcrosoft.com>,
	linux-fbdev@vger.kernel.org, 'Hui Wang' <jason77.wang@gmail.com>,
	Jingoo Han <jg1.han@samsung.com>
Subject: [PATCH V3 3/3] video: exynos_dp: Use the generic PHY driver
Date: Mon, 01 Jul 2013 14:24:52 +0900	[thread overview]
Message-ID: <005401ce761b$504d7090$f0e851b0$@samsung.com> (raw)

Use the generic PHY API instead of the platform callback to control
the DP PHY. The 'phy_label' field is added to the platform data
structure to allow PHY lookup on non-dt platforms.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Acked-by: Felipe Balbi <balbi@ti.com>
---
 .../devicetree/bindings/video/exynos_dp.txt        |   23 +---
 drivers/video/exynos/exynos_dp_core.c              |  118 ++------------------
 drivers/video/exynos/exynos_dp_core.h              |    2 +
 include/video/exynos_dp.h                          |    6 +-
 4 files changed, 21 insertions(+), 128 deletions(-)

diff --git a/Documentation/devicetree/bindings/video/exynos_dp.txt b/Documentation/devicetree/bindings/video/exynos_dp.txt
index 84f10c1..71645dc 100644
--- a/Documentation/devicetree/bindings/video/exynos_dp.txt
+++ b/Documentation/devicetree/bindings/video/exynos_dp.txt
@@ -1,17 +1,6 @@
 The Exynos display port interface should be configured based on
 the type of panel connected to it.
 
-We use two nodes:
-	-dp-controller node
-	-dptx-phy node(defined inside dp-controller node)
-
-For the DP-PHY initialization, we use the dptx-phy node.
-Required properties for dptx-phy:
-	-reg:
-		Base address of DP PHY register.
-	-samsung,enable-mask:
-		The bit-mask used to enable/disable DP PHY.
-
 For the Panel initialization, we read data from dp-controller node.
 Required properties for dp-controller:
 	-compatible:
@@ -25,6 +14,10 @@ Required properties for dp-controller:
 		from common clock binding: handle to dp clock.
 	-clock-names:
 		from common clock binding: Shall be "dp".
+	-phys:
+		from general phy binding: the phandle for the PHY device.
+	-phy-names:
+		from general phy binding: Should be "dp".
 	-interrupt-parent:
 		phandle to Interrupt combiner node.
 	-samsung,color-space:
@@ -67,12 +60,8 @@ SOC specific portion:
 		interrupt-parent = <&combiner>;
 		clocks = <&clock 342>;
 		clock-names = "dp";
-
-		dptx-phy {
-			reg = <0x10040720>;
-			samsung,enable-mask = <1>;
-		};
-
+		phys = <&dp_phy>;
+		phy-names = "dp";
 	};
 
 Board Specific portion:
diff --git a/drivers/video/exynos/exynos_dp_core.c b/drivers/video/exynos/exynos_dp_core.c
index 12bbede..bac515b 100644
--- a/drivers/video/exynos/exynos_dp_core.c
+++ b/drivers/video/exynos/exynos_dp_core.c
@@ -19,6 +19,7 @@
 #include <linux/interrupt.h>
 #include <linux/delay.h>
 #include <linux/of.h>
+#include <linux/phy/phy.h>
 
 #include <video/exynos_dp.h>
 
@@ -960,84 +961,15 @@ static struct exynos_dp_platdata *exynos_dp_dt_parse_pdata(struct device *dev)
 		return ERR_PTR(-EINVAL);
 	}
 
-	return pd;
-}
-
-static int exynos_dp_dt_parse_phydata(struct exynos_dp_device *dp)
-{
-	struct device_node *dp_phy_node = of_node_get(dp->dev->of_node);
-	u32 phy_base;
-	int ret = 0;
-
-	dp_phy_node = of_find_node_by_name(dp_phy_node, "dptx-phy");
-	if (!dp_phy_node) {
-		dev_err(dp->dev, "could not find dptx-phy node\n");
-		return -ENODEV;
-	}
-
-	if (of_property_read_u32(dp_phy_node, "reg", &phy_base)) {
-		dev_err(dp->dev, "failed to get reg for dptx-phy\n");
-		ret = -EINVAL;
-		goto err;
-	}
-
-	if (of_property_read_u32(dp_phy_node, "samsung,enable-mask",
-				&dp->enable_mask)) {
-		dev_err(dp->dev, "failed to get enable-mask for dptx-phy\n");
-		ret = -EINVAL;
-		goto err;
-	}
-
-	dp->phy_addr = ioremap(phy_base, SZ_4);
-	if (!dp->phy_addr) {
-		dev_err(dp->dev, "failed to ioremap dp-phy\n");
-		ret = -ENOMEM;
-		goto err;
-	}
-
-err:
-	of_node_put(dp_phy_node);
-
-	return ret;
-}
-
-static void exynos_dp_phy_init(struct exynos_dp_device *dp)
-{
-	u32 reg;
-
-	reg = __raw_readl(dp->phy_addr);
-	reg |= dp->enable_mask;
-	__raw_writel(reg, dp->phy_addr);
-}
-
-static void exynos_dp_phy_exit(struct exynos_dp_device *dp)
-{
-	u32 reg;
+	pd->phy_label = "dp";
 
-	reg = __raw_readl(dp->phy_addr);
-	reg &= ~(dp->enable_mask);
-	__raw_writel(reg, dp->phy_addr);
+	return pd;
 }
 #else
 static struct exynos_dp_platdata *exynos_dp_dt_parse_pdata(struct device *dev)
 {
 	return NULL;
 }
-
-static int exynos_dp_dt_parse_phydata(struct exynos_dp_device *dp)
-{
-	return -EINVAL;
-}
-
-static void exynos_dp_phy_init(struct exynos_dp_device *dp)
-{
-	return;
-}
-
-static void exynos_dp_phy_exit(struct exynos_dp_device *dp)
-{
-	return;
-}
 #endif /* CONFIG_OF */
 
 static int exynos_dp_probe(struct platform_device *pdev)
@@ -1061,10 +993,6 @@ static int exynos_dp_probe(struct platform_device *pdev)
 		pdata = exynos_dp_dt_parse_pdata(&pdev->dev);
 		if (IS_ERR(pdata))
 			return PTR_ERR(pdata);
-
-		ret = exynos_dp_dt_parse_phydata(dp);
-		if (ret)
-			return ret;
 	} else {
 		pdata = pdev->dev.platform_data;
 		if (!pdata) {
@@ -1073,6 +1001,10 @@ static int exynos_dp_probe(struct platform_device *pdev)
 		}
 	}
 
+	dp->phy = devm_phy_get(&pdev->dev, pdata->phy_label);
+	if (IS_ERR(dp->phy))
+		return PTR_ERR(dp->phy);
+
 	dp->clock = devm_clk_get(&pdev->dev, "dp");
 	if (IS_ERR(dp->clock)) {
 		dev_err(&pdev->dev, "failed to get clock\n");
@@ -1097,13 +1029,7 @@ static int exynos_dp_probe(struct platform_device *pdev)
 
 	dp->video_info = pdata->video_info;
 
-	if (pdev->dev.of_node) {
-		if (dp->phy_addr)
-			exynos_dp_phy_init(dp);
-	} else {
-		if (pdata->phy_init)
-			pdata->phy_init();
-	}
+	phy_power_on(dp->phy);
 
 	exynos_dp_init_dp(dp);
 
@@ -1121,42 +1047,27 @@ static int exynos_dp_probe(struct platform_device *pdev)
 
 static int exynos_dp_remove(struct platform_device *pdev)
 {
-	struct exynos_dp_platdata *pdata = pdev->dev.platform_data;
 	struct exynos_dp_device *dp = platform_get_drvdata(pdev);
 
 	flush_work(&dp->hotplug_work);
 
-	if (pdev->dev.of_node) {
-		if (dp->phy_addr)
-			exynos_dp_phy_exit(dp);
-	} else {
-		if (pdata->phy_exit)
-			pdata->phy_exit();
-	}
+	phy_power_off(dp->phy);
 
 	clk_disable_unprepare(dp->clock);
 
-
 	return 0;
 }
 
 #ifdef CONFIG_PM_SLEEP
 static int exynos_dp_suspend(struct device *dev)
 {
-	struct exynos_dp_platdata *pdata = dev->platform_data;
 	struct exynos_dp_device *dp = dev_get_drvdata(dev);
 
 	disable_irq(dp->irq);
 
 	flush_work(&dp->hotplug_work);
 
-	if (dev->of_node) {
-		if (dp->phy_addr)
-			exynos_dp_phy_exit(dp);
-	} else {
-		if (pdata->phy_exit)
-			pdata->phy_exit();
-	}
+	phy_power_off(dp->phy);
 
 	clk_disable_unprepare(dp->clock);
 
@@ -1165,16 +1076,9 @@ static int exynos_dp_suspend(struct device *dev)
 
 static int exynos_dp_resume(struct device *dev)
 {
-	struct exynos_dp_platdata *pdata = dev->platform_data;
 	struct exynos_dp_device *dp = dev_get_drvdata(dev);
 
-	if (dev->of_node) {
-		if (dp->phy_addr)
-			exynos_dp_phy_init(dp);
-	} else {
-		if (pdata->phy_init)
-			pdata->phy_init();
-	}
+	phy_power_on(dp->phy);
 
 	clk_prepare_enable(dp->clock);
 
diff --git a/drivers/video/exynos/exynos_dp_core.h b/drivers/video/exynos/exynos_dp_core.h
index 6c567bbf..b3d0328 100644
--- a/drivers/video/exynos/exynos_dp_core.h
+++ b/drivers/video/exynos/exynos_dp_core.h
@@ -42,6 +42,8 @@ struct exynos_dp_device {
 	struct video_info	*video_info;
 	struct link_train	link_train;
 	struct work_struct	hotplug_work;
+
+	struct phy		*phy;
 };
 
 /* exynos_dp_reg.c */
diff --git a/include/video/exynos_dp.h b/include/video/exynos_dp.h
index bd8cabd..f38c9af 100644
--- a/include/video/exynos_dp.h
+++ b/include/video/exynos_dp.h
@@ -122,10 +122,8 @@ struct video_info {
 };
 
 struct exynos_dp_platdata {
-	struct video_info *video_info;
-
-	void (*phy_init)(void);
-	void (*phy_exit)(void);
+	struct video_info	*video_info;
+	const char		*phy_label;
 };
 
 #endif /* _EXYNOS_DP_H */
-- 
1.7.10.4

WARNING: multiple messages have this Message-ID (diff)
From: Jingoo Han <jg1.han@samsung.com>
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH V3 3/3] video: exynos_dp: Use the generic PHY driver
Date: Mon, 01 Jul 2013 05:24:52 +0000	[thread overview]
Message-ID: <005401ce761b$504d7090$f0e851b0$@samsung.com> (raw)

Use the generic PHY API instead of the platform callback to control
the DP PHY. The 'phy_label' field is added to the platform data
structure to allow PHY lookup on non-dt platforms.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Acked-by: Felipe Balbi <balbi@ti.com>
---
 .../devicetree/bindings/video/exynos_dp.txt        |   23 +---
 drivers/video/exynos/exynos_dp_core.c              |  118 ++------------------
 drivers/video/exynos/exynos_dp_core.h              |    2 +
 include/video/exynos_dp.h                          |    6 +-
 4 files changed, 21 insertions(+), 128 deletions(-)

diff --git a/Documentation/devicetree/bindings/video/exynos_dp.txt b/Documentation/devicetree/bindings/video/exynos_dp.txt
index 84f10c1..71645dc 100644
--- a/Documentation/devicetree/bindings/video/exynos_dp.txt
+++ b/Documentation/devicetree/bindings/video/exynos_dp.txt
@@ -1,17 +1,6 @@
 The Exynos display port interface should be configured based on
 the type of panel connected to it.
 
-We use two nodes:
-	-dp-controller node
-	-dptx-phy node(defined inside dp-controller node)
-
-For the DP-PHY initialization, we use the dptx-phy node.
-Required properties for dptx-phy:
-	-reg:
-		Base address of DP PHY register.
-	-samsung,enable-mask:
-		The bit-mask used to enable/disable DP PHY.
-
 For the Panel initialization, we read data from dp-controller node.
 Required properties for dp-controller:
 	-compatible:
@@ -25,6 +14,10 @@ Required properties for dp-controller:
 		from common clock binding: handle to dp clock.
 	-clock-names:
 		from common clock binding: Shall be "dp".
+	-phys:
+		from general phy binding: the phandle for the PHY device.
+	-phy-names:
+		from general phy binding: Should be "dp".
 	-interrupt-parent:
 		phandle to Interrupt combiner node.
 	-samsung,color-space:
@@ -67,12 +60,8 @@ SOC specific portion:
 		interrupt-parent = <&combiner>;
 		clocks = <&clock 342>;
 		clock-names = "dp";
-
-		dptx-phy {
-			reg = <0x10040720>;
-			samsung,enable-mask = <1>;
-		};
-
+		phys = <&dp_phy>;
+		phy-names = "dp";
 	};
 
 Board Specific portion:
diff --git a/drivers/video/exynos/exynos_dp_core.c b/drivers/video/exynos/exynos_dp_core.c
index 12bbede..bac515b 100644
--- a/drivers/video/exynos/exynos_dp_core.c
+++ b/drivers/video/exynos/exynos_dp_core.c
@@ -19,6 +19,7 @@
 #include <linux/interrupt.h>
 #include <linux/delay.h>
 #include <linux/of.h>
+#include <linux/phy/phy.h>
 
 #include <video/exynos_dp.h>
 
@@ -960,84 +961,15 @@ static struct exynos_dp_platdata *exynos_dp_dt_parse_pdata(struct device *dev)
 		return ERR_PTR(-EINVAL);
 	}
 
-	return pd;
-}
-
-static int exynos_dp_dt_parse_phydata(struct exynos_dp_device *dp)
-{
-	struct device_node *dp_phy_node = of_node_get(dp->dev->of_node);
-	u32 phy_base;
-	int ret = 0;
-
-	dp_phy_node = of_find_node_by_name(dp_phy_node, "dptx-phy");
-	if (!dp_phy_node) {
-		dev_err(dp->dev, "could not find dptx-phy node\n");
-		return -ENODEV;
-	}
-
-	if (of_property_read_u32(dp_phy_node, "reg", &phy_base)) {
-		dev_err(dp->dev, "failed to get reg for dptx-phy\n");
-		ret = -EINVAL;
-		goto err;
-	}
-
-	if (of_property_read_u32(dp_phy_node, "samsung,enable-mask",
-				&dp->enable_mask)) {
-		dev_err(dp->dev, "failed to get enable-mask for dptx-phy\n");
-		ret = -EINVAL;
-		goto err;
-	}
-
-	dp->phy_addr = ioremap(phy_base, SZ_4);
-	if (!dp->phy_addr) {
-		dev_err(dp->dev, "failed to ioremap dp-phy\n");
-		ret = -ENOMEM;
-		goto err;
-	}
-
-err:
-	of_node_put(dp_phy_node);
-
-	return ret;
-}
-
-static void exynos_dp_phy_init(struct exynos_dp_device *dp)
-{
-	u32 reg;
-
-	reg = __raw_readl(dp->phy_addr);
-	reg |= dp->enable_mask;
-	__raw_writel(reg, dp->phy_addr);
-}
-
-static void exynos_dp_phy_exit(struct exynos_dp_device *dp)
-{
-	u32 reg;
+	pd->phy_label = "dp";
 
-	reg = __raw_readl(dp->phy_addr);
-	reg &= ~(dp->enable_mask);
-	__raw_writel(reg, dp->phy_addr);
+	return pd;
 }
 #else
 static struct exynos_dp_platdata *exynos_dp_dt_parse_pdata(struct device *dev)
 {
 	return NULL;
 }
-
-static int exynos_dp_dt_parse_phydata(struct exynos_dp_device *dp)
-{
-	return -EINVAL;
-}
-
-static void exynos_dp_phy_init(struct exynos_dp_device *dp)
-{
-	return;
-}
-
-static void exynos_dp_phy_exit(struct exynos_dp_device *dp)
-{
-	return;
-}
 #endif /* CONFIG_OF */
 
 static int exynos_dp_probe(struct platform_device *pdev)
@@ -1061,10 +993,6 @@ static int exynos_dp_probe(struct platform_device *pdev)
 		pdata = exynos_dp_dt_parse_pdata(&pdev->dev);
 		if (IS_ERR(pdata))
 			return PTR_ERR(pdata);
-
-		ret = exynos_dp_dt_parse_phydata(dp);
-		if (ret)
-			return ret;
 	} else {
 		pdata = pdev->dev.platform_data;
 		if (!pdata) {
@@ -1073,6 +1001,10 @@ static int exynos_dp_probe(struct platform_device *pdev)
 		}
 	}
 
+	dp->phy = devm_phy_get(&pdev->dev, pdata->phy_label);
+	if (IS_ERR(dp->phy))
+		return PTR_ERR(dp->phy);
+
 	dp->clock = devm_clk_get(&pdev->dev, "dp");
 	if (IS_ERR(dp->clock)) {
 		dev_err(&pdev->dev, "failed to get clock\n");
@@ -1097,13 +1029,7 @@ static int exynos_dp_probe(struct platform_device *pdev)
 
 	dp->video_info = pdata->video_info;
 
-	if (pdev->dev.of_node) {
-		if (dp->phy_addr)
-			exynos_dp_phy_init(dp);
-	} else {
-		if (pdata->phy_init)
-			pdata->phy_init();
-	}
+	phy_power_on(dp->phy);
 
 	exynos_dp_init_dp(dp);
 
@@ -1121,42 +1047,27 @@ static int exynos_dp_probe(struct platform_device *pdev)
 
 static int exynos_dp_remove(struct platform_device *pdev)
 {
-	struct exynos_dp_platdata *pdata = pdev->dev.platform_data;
 	struct exynos_dp_device *dp = platform_get_drvdata(pdev);
 
 	flush_work(&dp->hotplug_work);
 
-	if (pdev->dev.of_node) {
-		if (dp->phy_addr)
-			exynos_dp_phy_exit(dp);
-	} else {
-		if (pdata->phy_exit)
-			pdata->phy_exit();
-	}
+	phy_power_off(dp->phy);
 
 	clk_disable_unprepare(dp->clock);
 
-
 	return 0;
 }
 
 #ifdef CONFIG_PM_SLEEP
 static int exynos_dp_suspend(struct device *dev)
 {
-	struct exynos_dp_platdata *pdata = dev->platform_data;
 	struct exynos_dp_device *dp = dev_get_drvdata(dev);
 
 	disable_irq(dp->irq);
 
 	flush_work(&dp->hotplug_work);
 
-	if (dev->of_node) {
-		if (dp->phy_addr)
-			exynos_dp_phy_exit(dp);
-	} else {
-		if (pdata->phy_exit)
-			pdata->phy_exit();
-	}
+	phy_power_off(dp->phy);
 
 	clk_disable_unprepare(dp->clock);
 
@@ -1165,16 +1076,9 @@ static int exynos_dp_suspend(struct device *dev)
 
 static int exynos_dp_resume(struct device *dev)
 {
-	struct exynos_dp_platdata *pdata = dev->platform_data;
 	struct exynos_dp_device *dp = dev_get_drvdata(dev);
 
-	if (dev->of_node) {
-		if (dp->phy_addr)
-			exynos_dp_phy_init(dp);
-	} else {
-		if (pdata->phy_init)
-			pdata->phy_init();
-	}
+	phy_power_on(dp->phy);
 
 	clk_prepare_enable(dp->clock);
 
diff --git a/drivers/video/exynos/exynos_dp_core.h b/drivers/video/exynos/exynos_dp_core.h
index 6c567bbf..b3d0328 100644
--- a/drivers/video/exynos/exynos_dp_core.h
+++ b/drivers/video/exynos/exynos_dp_core.h
@@ -42,6 +42,8 @@ struct exynos_dp_device {
 	struct video_info	*video_info;
 	struct link_train	link_train;
 	struct work_struct	hotplug_work;
+
+	struct phy		*phy;
 };
 
 /* exynos_dp_reg.c */
diff --git a/include/video/exynos_dp.h b/include/video/exynos_dp.h
index bd8cabd..f38c9af 100644
--- a/include/video/exynos_dp.h
+++ b/include/video/exynos_dp.h
@@ -122,10 +122,8 @@ struct video_info {
 };
 
 struct exynos_dp_platdata {
-	struct video_info *video_info;
-
-	void (*phy_init)(void);
-	void (*phy_exit)(void);
+	struct video_info	*video_info;
+	const char		*phy_label;
 };
 
 #endif /* _EXYNOS_DP_H */
-- 
1.7.10.4



WARNING: multiple messages have this Message-ID (diff)
From: jg1.han@samsung.com (Jingoo Han)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH V3 3/3] video: exynos_dp: Use the generic PHY driver
Date: Mon, 01 Jul 2013 14:24:52 +0900	[thread overview]
Message-ID: <005401ce761b$504d7090$f0e851b0$@samsung.com> (raw)

Use the generic PHY API instead of the platform callback to control
the DP PHY. The 'phy_label' field is added to the platform data
structure to allow PHY lookup on non-dt platforms.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Acked-by: Felipe Balbi <balbi@ti.com>
---
 .../devicetree/bindings/video/exynos_dp.txt        |   23 +---
 drivers/video/exynos/exynos_dp_core.c              |  118 ++------------------
 drivers/video/exynos/exynos_dp_core.h              |    2 +
 include/video/exynos_dp.h                          |    6 +-
 4 files changed, 21 insertions(+), 128 deletions(-)

diff --git a/Documentation/devicetree/bindings/video/exynos_dp.txt b/Documentation/devicetree/bindings/video/exynos_dp.txt
index 84f10c1..71645dc 100644
--- a/Documentation/devicetree/bindings/video/exynos_dp.txt
+++ b/Documentation/devicetree/bindings/video/exynos_dp.txt
@@ -1,17 +1,6 @@
 The Exynos display port interface should be configured based on
 the type of panel connected to it.
 
-We use two nodes:
-	-dp-controller node
-	-dptx-phy node(defined inside dp-controller node)
-
-For the DP-PHY initialization, we use the dptx-phy node.
-Required properties for dptx-phy:
-	-reg:
-		Base address of DP PHY register.
-	-samsung,enable-mask:
-		The bit-mask used to enable/disable DP PHY.
-
 For the Panel initialization, we read data from dp-controller node.
 Required properties for dp-controller:
 	-compatible:
@@ -25,6 +14,10 @@ Required properties for dp-controller:
 		from common clock binding: handle to dp clock.
 	-clock-names:
 		from common clock binding: Shall be "dp".
+	-phys:
+		from general phy binding: the phandle for the PHY device.
+	-phy-names:
+		from general phy binding: Should be "dp".
 	-interrupt-parent:
 		phandle to Interrupt combiner node.
 	-samsung,color-space:
@@ -67,12 +60,8 @@ SOC specific portion:
 		interrupt-parent = <&combiner>;
 		clocks = <&clock 342>;
 		clock-names = "dp";
-
-		dptx-phy {
-			reg = <0x10040720>;
-			samsung,enable-mask = <1>;
-		};
-
+		phys = <&dp_phy>;
+		phy-names = "dp";
 	};
 
 Board Specific portion:
diff --git a/drivers/video/exynos/exynos_dp_core.c b/drivers/video/exynos/exynos_dp_core.c
index 12bbede..bac515b 100644
--- a/drivers/video/exynos/exynos_dp_core.c
+++ b/drivers/video/exynos/exynos_dp_core.c
@@ -19,6 +19,7 @@
 #include <linux/interrupt.h>
 #include <linux/delay.h>
 #include <linux/of.h>
+#include <linux/phy/phy.h>
 
 #include <video/exynos_dp.h>
 
@@ -960,84 +961,15 @@ static struct exynos_dp_platdata *exynos_dp_dt_parse_pdata(struct device *dev)
 		return ERR_PTR(-EINVAL);
 	}
 
-	return pd;
-}
-
-static int exynos_dp_dt_parse_phydata(struct exynos_dp_device *dp)
-{
-	struct device_node *dp_phy_node = of_node_get(dp->dev->of_node);
-	u32 phy_base;
-	int ret = 0;
-
-	dp_phy_node = of_find_node_by_name(dp_phy_node, "dptx-phy");
-	if (!dp_phy_node) {
-		dev_err(dp->dev, "could not find dptx-phy node\n");
-		return -ENODEV;
-	}
-
-	if (of_property_read_u32(dp_phy_node, "reg", &phy_base)) {
-		dev_err(dp->dev, "failed to get reg for dptx-phy\n");
-		ret = -EINVAL;
-		goto err;
-	}
-
-	if (of_property_read_u32(dp_phy_node, "samsung,enable-mask",
-				&dp->enable_mask)) {
-		dev_err(dp->dev, "failed to get enable-mask for dptx-phy\n");
-		ret = -EINVAL;
-		goto err;
-	}
-
-	dp->phy_addr = ioremap(phy_base, SZ_4);
-	if (!dp->phy_addr) {
-		dev_err(dp->dev, "failed to ioremap dp-phy\n");
-		ret = -ENOMEM;
-		goto err;
-	}
-
-err:
-	of_node_put(dp_phy_node);
-
-	return ret;
-}
-
-static void exynos_dp_phy_init(struct exynos_dp_device *dp)
-{
-	u32 reg;
-
-	reg = __raw_readl(dp->phy_addr);
-	reg |= dp->enable_mask;
-	__raw_writel(reg, dp->phy_addr);
-}
-
-static void exynos_dp_phy_exit(struct exynos_dp_device *dp)
-{
-	u32 reg;
+	pd->phy_label = "dp";
 
-	reg = __raw_readl(dp->phy_addr);
-	reg &= ~(dp->enable_mask);
-	__raw_writel(reg, dp->phy_addr);
+	return pd;
 }
 #else
 static struct exynos_dp_platdata *exynos_dp_dt_parse_pdata(struct device *dev)
 {
 	return NULL;
 }
-
-static int exynos_dp_dt_parse_phydata(struct exynos_dp_device *dp)
-{
-	return -EINVAL;
-}
-
-static void exynos_dp_phy_init(struct exynos_dp_device *dp)
-{
-	return;
-}
-
-static void exynos_dp_phy_exit(struct exynos_dp_device *dp)
-{
-	return;
-}
 #endif /* CONFIG_OF */
 
 static int exynos_dp_probe(struct platform_device *pdev)
@@ -1061,10 +993,6 @@ static int exynos_dp_probe(struct platform_device *pdev)
 		pdata = exynos_dp_dt_parse_pdata(&pdev->dev);
 		if (IS_ERR(pdata))
 			return PTR_ERR(pdata);
-
-		ret = exynos_dp_dt_parse_phydata(dp);
-		if (ret)
-			return ret;
 	} else {
 		pdata = pdev->dev.platform_data;
 		if (!pdata) {
@@ -1073,6 +1001,10 @@ static int exynos_dp_probe(struct platform_device *pdev)
 		}
 	}
 
+	dp->phy = devm_phy_get(&pdev->dev, pdata->phy_label);
+	if (IS_ERR(dp->phy))
+		return PTR_ERR(dp->phy);
+
 	dp->clock = devm_clk_get(&pdev->dev, "dp");
 	if (IS_ERR(dp->clock)) {
 		dev_err(&pdev->dev, "failed to get clock\n");
@@ -1097,13 +1029,7 @@ static int exynos_dp_probe(struct platform_device *pdev)
 
 	dp->video_info = pdata->video_info;
 
-	if (pdev->dev.of_node) {
-		if (dp->phy_addr)
-			exynos_dp_phy_init(dp);
-	} else {
-		if (pdata->phy_init)
-			pdata->phy_init();
-	}
+	phy_power_on(dp->phy);
 
 	exynos_dp_init_dp(dp);
 
@@ -1121,42 +1047,27 @@ static int exynos_dp_probe(struct platform_device *pdev)
 
 static int exynos_dp_remove(struct platform_device *pdev)
 {
-	struct exynos_dp_platdata *pdata = pdev->dev.platform_data;
 	struct exynos_dp_device *dp = platform_get_drvdata(pdev);
 
 	flush_work(&dp->hotplug_work);
 
-	if (pdev->dev.of_node) {
-		if (dp->phy_addr)
-			exynos_dp_phy_exit(dp);
-	} else {
-		if (pdata->phy_exit)
-			pdata->phy_exit();
-	}
+	phy_power_off(dp->phy);
 
 	clk_disable_unprepare(dp->clock);
 
-
 	return 0;
 }
 
 #ifdef CONFIG_PM_SLEEP
 static int exynos_dp_suspend(struct device *dev)
 {
-	struct exynos_dp_platdata *pdata = dev->platform_data;
 	struct exynos_dp_device *dp = dev_get_drvdata(dev);
 
 	disable_irq(dp->irq);
 
 	flush_work(&dp->hotplug_work);
 
-	if (dev->of_node) {
-		if (dp->phy_addr)
-			exynos_dp_phy_exit(dp);
-	} else {
-		if (pdata->phy_exit)
-			pdata->phy_exit();
-	}
+	phy_power_off(dp->phy);
 
 	clk_disable_unprepare(dp->clock);
 
@@ -1165,16 +1076,9 @@ static int exynos_dp_suspend(struct device *dev)
 
 static int exynos_dp_resume(struct device *dev)
 {
-	struct exynos_dp_platdata *pdata = dev->platform_data;
 	struct exynos_dp_device *dp = dev_get_drvdata(dev);
 
-	if (dev->of_node) {
-		if (dp->phy_addr)
-			exynos_dp_phy_init(dp);
-	} else {
-		if (pdata->phy_init)
-			pdata->phy_init();
-	}
+	phy_power_on(dp->phy);
 
 	clk_prepare_enable(dp->clock);
 
diff --git a/drivers/video/exynos/exynos_dp_core.h b/drivers/video/exynos/exynos_dp_core.h
index 6c567bbf..b3d0328 100644
--- a/drivers/video/exynos/exynos_dp_core.h
+++ b/drivers/video/exynos/exynos_dp_core.h
@@ -42,6 +42,8 @@ struct exynos_dp_device {
 	struct video_info	*video_info;
 	struct link_train	link_train;
 	struct work_struct	hotplug_work;
+
+	struct phy		*phy;
 };
 
 /* exynos_dp_reg.c */
diff --git a/include/video/exynos_dp.h b/include/video/exynos_dp.h
index bd8cabd..f38c9af 100644
--- a/include/video/exynos_dp.h
+++ b/include/video/exynos_dp.h
@@ -122,10 +122,8 @@ struct video_info {
 };
 
 struct exynos_dp_platdata {
-	struct video_info *video_info;
-
-	void (*phy_init)(void);
-	void (*phy_exit)(void);
+	struct video_info	*video_info;
+	const char		*phy_label;
 };
 
 #endif /* _EXYNOS_DP_H */
-- 
1.7.10.4

             reply	other threads:[~2013-07-01  5:24 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-07-01  5:24 Jingoo Han [this message]
2013-07-01  5:24 ` [PATCH V3 3/3] video: exynos_dp: Use the generic PHY driver Jingoo Han
2013-07-01  5:24 ` Jingoo Han
2013-07-01  6:27 ` Kishon Vijay Abraham I
2013-07-01  6:39   ` Kishon Vijay Abraham I
2013-07-01  6:27   ` Kishon Vijay Abraham I
2013-07-01  6:27   ` Kishon Vijay Abraham I
2013-07-01  7:07   ` Jingoo Han
2013-07-01  7:07     ` Jingoo Han
2013-07-01  7:07     ` Jingoo Han
2013-07-01 19:35 ` Sylwester Nawrocki
2013-07-01 19:35   ` Sylwester Nawrocki
2013-07-01 19:35   ` Sylwester Nawrocki
2013-07-02  7:05   ` Jingoo Han
2013-07-02  7:05     ` Jingoo Han
2013-07-02  7:05     ` Jingoo Han

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='005401ce761b$504d7090$f0e851b0$@samsung.com' \
    --to=jg1.han@samsung.com \
    --cc=balbi@ti.com \
    --cc=devicetree-discuss@lists.ozlabs.org \
    --cc=dh09.lee@samsung.com \
    --cc=inki.dae@samsung.com \
    --cc=jason77.wang@gmail.com \
    --cc=kgene.kim@samsung.com \
    --cc=kishon@ti.com \
    --cc=kyungmin.park@samsung.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-fbdev@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=linux-samsung-soc@vger.kernel.org \
    --cc=plagnioj@jcrosoft.com \
    --cc=s.nawrocki@samsung.com \
    --cc=t.figa@samsung.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.