All of lore.kernel.org
 help / color / mirror / Atom feed
From: Geert Uytterhoeven <geert+renesas@glider.be>
To: Thomas Bogendoerfer <tsbogend@alpha.franken.de>,
	Markos Chandras <markos.chandras@imgtec.com>,
	Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@vger.kernel.org, linux-kernel@vger.kernel.org,
	Geert Uytterhoeven <geert+renesas@glider.be>
Subject: [PATCH] mips: cm: Convert to bitfield API to fix out-of-bounds access
Date: Fri, 29 Oct 2021 11:58:16 +0200	[thread overview]
Message-ID: <0471c545117c5fa05bd9c73005cda9b74608a61e.1635501373.git.geert+renesas@glider.be> (raw)

mips_cm_error_report() extracts the cause and other cause from the error
register using shifts.  This works fine for the former, as it is stored
in the top bits, and the shift will thus remove all non-related bits.
However, the latter is stored in the bottom bits, hence thus needs masking
to get rid of non-related bits.  Without such masking, using it as an
index into the cm2_causes[] array will lead to an out-of-bounds access,
probably causing a crash.

Fix this by using FIELD_GET() instead.  Bite the bullet and convert all
MIPS CM handling to the bitfield API, to improve readability and safety.

Fixes: 3885c2b463f6a236 ("MIPS: CM: Add support for reporting CM cache errors")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
Compile-tested only, but assembler output before/after compared.
---
 arch/mips/include/asm/mips-cm.h | 12 ++++++------
 arch/mips/kernel/mips-cm.c      | 21 ++++++++++-----------
 2 files changed, 16 insertions(+), 17 deletions(-)

diff --git a/arch/mips/include/asm/mips-cm.h b/arch/mips/include/asm/mips-cm.h
index aeae2effa123d7e2..23c67c0871b17c91 100644
--- a/arch/mips/include/asm/mips-cm.h
+++ b/arch/mips/include/asm/mips-cm.h
@@ -11,6 +11,7 @@
 #ifndef __MIPS_ASM_MIPS_CM_H__
 #define __MIPS_ASM_MIPS_CM_H__
 
+#include <linux/bitfield.h>
 #include <linux/bitops.h>
 #include <linux/errno.h>
 
@@ -153,8 +154,8 @@ GCR_ACCESSOR_RO(32, 0x030, rev)
 #define CM_GCR_REV_MINOR			GENMASK(7, 0)
 
 #define CM_ENCODE_REV(major, minor) \
-		(((major) << __ffs(CM_GCR_REV_MAJOR)) | \
-		 ((minor) << __ffs(CM_GCR_REV_MINOR)))
+		(FIELD_PREP(CM_GCR_REV_MAJOR, major) | \
+		 FIELD_PREP(CM_GCR_REV_MINOR, minor))
 
 #define CM_REV_CM2				CM_ENCODE_REV(6, 0)
 #define CM_REV_CM2_5				CM_ENCODE_REV(7, 0)
@@ -362,10 +363,10 @@ static inline int mips_cm_revision(void)
 static inline unsigned int mips_cm_max_vp_width(void)
 {
 	extern int smp_num_siblings;
-	uint32_t cfg;
 
 	if (mips_cm_revision() >= CM_REV_CM3)
-		return read_gcr_sys_config2() & CM_GCR_SYS_CONFIG2_MAXVPW;
+		return FIELD_GET(CM_GCR_SYS_CONFIG2_MAXVPW,
+				 read_gcr_sys_config2());
 
 	if (mips_cm_present()) {
 		/*
@@ -373,8 +374,7 @@ static inline unsigned int mips_cm_max_vp_width(void)
 		 * number of VP(E)s, and if that ever changes then this will
 		 * need revisiting.
 		 */
-		cfg = read_gcr_cl_config() & CM_GCR_Cx_CONFIG_PVPE;
-		return (cfg >> __ffs(CM_GCR_Cx_CONFIG_PVPE)) + 1;
+		return FIELD_GET(CM_GCR_Cx_CONFIG_PVPE, read_gcr_cl_config()) + 1;
 	}
 
 	if (IS_ENABLED(CONFIG_SMP))
diff --git a/arch/mips/kernel/mips-cm.c b/arch/mips/kernel/mips-cm.c
index 90f1c3df1f0e495e..b4f7d950c84680d3 100644
--- a/arch/mips/kernel/mips-cm.c
+++ b/arch/mips/kernel/mips-cm.c
@@ -221,8 +221,7 @@ static void mips_cm_probe_l2sync(void)
 	phys_addr_t addr;
 
 	/* L2-only sync was introduced with CM major revision 6 */
-	major_rev = (read_gcr_rev() & CM_GCR_REV_MAJOR) >>
-		__ffs(CM_GCR_REV_MAJOR);
+	major_rev = FIELD_GET(CM_GCR_REV_MAJOR, read_gcr_rev());
 	if (major_rev < 6)
 		return;
 
@@ -306,13 +305,13 @@ void mips_cm_lock_other(unsigned int cluster, unsigned int core,
 	preempt_disable();
 
 	if (cm_rev >= CM_REV_CM3) {
-		val = core << __ffs(CM3_GCR_Cx_OTHER_CORE);
-		val |= vp << __ffs(CM3_GCR_Cx_OTHER_VP);
+		val = FIELD_PREP(CM3_GCR_Cx_OTHER_CORE, core) |
+		      FIELD_PREP(CM3_GCR_Cx_OTHER_VP, vp);
 
 		if (cm_rev >= CM_REV_CM3_5) {
 			val |= CM_GCR_Cx_OTHER_CLUSTER_EN;
-			val |= cluster << __ffs(CM_GCR_Cx_OTHER_CLUSTER);
-			val |= block << __ffs(CM_GCR_Cx_OTHER_BLOCK);
+			val |= FIELD_PREP(CM_GCR_Cx_OTHER_CLUSTER, cluster);
+			val |= FIELD_PREP(CM_GCR_Cx_OTHER_BLOCK, block);
 		} else {
 			WARN_ON(cluster != 0);
 			WARN_ON(block != CM_GCR_Cx_OTHER_BLOCK_LOCAL);
@@ -342,7 +341,7 @@ void mips_cm_lock_other(unsigned int cluster, unsigned int core,
 		spin_lock_irqsave(&per_cpu(cm_core_lock, curr_core),
 				  per_cpu(cm_core_lock_flags, curr_core));
 
-		val = core << __ffs(CM_GCR_Cx_OTHER_CORENUM);
+		val = FIELD_PREP(CM_GCR_Cx_OTHER_CORENUM, core);
 	}
 
 	write_gcr_cl_other(val);
@@ -386,8 +385,8 @@ void mips_cm_error_report(void)
 	cm_other = read_gcr_error_mult();
 
 	if (revision < CM_REV_CM3) { /* CM2 */
-		cause = cm_error >> __ffs(CM_GCR_ERROR_CAUSE_ERRTYPE);
-		ocause = cm_other >> __ffs(CM_GCR_ERROR_MULT_ERR2ND);
+		cause = FIELD_GET(CM_GCR_ERROR_CAUSE_ERRTYPE, cm_error);
+		ocause = FIELD_GET(CM_GCR_ERROR_MULT_ERR2ND, cm_other);
 
 		if (!cause)
 			return;
@@ -445,8 +444,8 @@ void mips_cm_error_report(void)
 		ulong core_id_bits, vp_id_bits, cmd_bits, cmd_group_bits;
 		ulong cm3_cca_bits, mcp_bits, cm3_tr_bits, sched_bit;
 
-		cause = cm_error >> __ffs64(CM3_GCR_ERROR_CAUSE_ERRTYPE);
-		ocause = cm_other >> __ffs(CM_GCR_ERROR_MULT_ERR2ND);
+		cause = FIELD_GET(CM3_GCR_ERROR_CAUSE_ERRTYPE, cm_error);
+		ocause = FIELD_GET(CM_GCR_ERROR_MULT_ERR2ND, cm_other);
 
 		if (!cause)
 			return;
-- 
2.25.1


             reply	other threads:[~2021-10-29 10:59 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-10-29  9:58 Geert Uytterhoeven [this message]
2021-10-29 11:42 ` [PATCH] mips: cm: Convert to bitfield API to fix out-of-bounds access Jiaxun Yang
2021-11-02 10:21 ` Thomas Bogendoerfer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=0471c545117c5fa05bd9c73005cda9b74608a61e.1635501373.git.geert+renesas@glider.be \
    --to=geert+renesas@glider.be \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mips@vger.kernel.org \
    --cc=markos.chandras@imgtec.com \
    --cc=ralf@linux-mips.org \
    --cc=tsbogend@alpha.franken.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.