From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
To: horms@verge.net.au, linux-renesas-soc@vger.kernel.org,
robh+dt@kernel.org, mark.rutland@arm.com,
devicetree@vger.kernel.org
Cc: magnus.damm@gmail.com, linux@arm.linux.org.uk,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 1/2] ARM: dts: r8a7792: add GPIO support
Date: Wed, 06 Jul 2016 01:02:20 +0300 [thread overview]
Message-ID: <11674399.J5QsPL1iTr@wasted.cogentembedded.com> (raw)
In-Reply-To: <19087307.ZHtRY0pPL5@wasted.cogentembedded.com>
Describe all 12 GPIO controllers in the R8A7792 device tree.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
Changes in version 2:
- added Geert's tag.
arch/arm/boot/dts/r8a7792.dtsi | 168 +++++++++++++++++++++++++++++++++++++++++
1 file changed, 168 insertions(+)
Index: renesas/arch/arm/boot/dts/r8a7792.dtsi
===================================================================
--- renesas.orig/arch/arm/boot/dts/r8a7792.dtsi
+++ renesas/arch/arm/boot/dts/r8a7792.dtsi
@@ -113,6 +113,174 @@
reg = <0 0xe6060000 0 0x144>;
};
+ gpio0: gpio@e6050000 {
+ compatible = "renesas,gpio-r8a7792",
+ "renesas,gpio-rcar";
+ reg = <0 0xe6050000 0 0x50>;
+ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 0 29>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&mstp9_clks R8A7792_CLK_GPIO0>;
+ power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+ };
+
+ gpio1: gpio@e6051000 {
+ compatible = "renesas,gpio-r8a7792",
+ "renesas,gpio-rcar";
+ reg = <0 0xe6051000 0 0x50>;
+ interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 32 23>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&mstp9_clks R8A7792_CLK_GPIO1>;
+ power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+ };
+
+ gpio2: gpio@e6052000 {
+ compatible = "renesas,gpio-r8a7792",
+ "renesas,gpio-rcar";
+ reg = <0 0xe6052000 0 0x50>;
+ interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 64 32>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&mstp9_clks R8A7792_CLK_GPIO2>;
+ power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+ };
+
+ gpio3: gpio@e6053000 {
+ compatible = "renesas,gpio-r8a7792",
+ "renesas,gpio-rcar";
+ reg = <0 0xe6053000 0 0x50>;
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 96 28>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&mstp9_clks R8A7792_CLK_GPIO3>;
+ power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+ };
+
+ gpio4: gpio@e6054000 {
+ compatible = "renesas,gpio-r8a7792",
+ "renesas,gpio-rcar";
+ reg = <0 0xe6054000 0 0x50>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 128 17>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&mstp9_clks R8A7792_CLK_GPIO4>;
+ power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+ };
+
+ gpio5: gpio@e6055000 {
+ compatible = "renesas,gpio-r8a7792",
+ "renesas,gpio-rcar";
+ reg = <0 0xe6055000 0 0x50>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 160 17>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&mstp9_clks R8A7792_CLK_GPIO5>;
+ power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+ };
+
+ gpio6: gpio@e6055100 {
+ compatible = "renesas,gpio-r8a7792",
+ "renesas,gpio-rcar";
+ reg = <0 0xe6055100 0 0x50>;
+ interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 192 17>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&mstp9_clks R8A7792_CLK_GPIO6>;
+ power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+ };
+
+ gpio7: gpio@e6055200 {
+ compatible = "renesas,gpio-r8a7792",
+ "renesas,gpio-rcar";
+ reg = <0 0xe6055200 0 0x50>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 224 17>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&mstp9_clks R8A7792_CLK_GPIO7>;
+ power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+ };
+
+ gpio8: gpio@e6055300 {
+ compatible = "renesas,gpio-r8a7792",
+ "renesas,gpio-rcar";
+ reg = <0 0xe6055300 0 0x50>;
+ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 256 17>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&mstp9_clks R8A7792_CLK_GPIO8>;
+ power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+ };
+
+ gpio9: gpio@e6055400 {
+ compatible = "renesas,gpio-r8a7792",
+ "renesas,gpio-rcar";
+ reg = <0 0xe6055400 0 0x50>;
+ interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 288 17>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&mstp9_clks R8A7792_CLK_GPIO9>;
+ power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+ };
+
+ gpio10: gpio@e6055500 {
+ compatible = "renesas,gpio-r8a7792",
+ "renesas,gpio-rcar";
+ reg = <0 0xe6055500 0 0x50>;
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 320 32>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&mstp9_clks R8A7792_CLK_GPIO10>;
+ power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+ };
+
+ gpio11: gpio@e6055600 {
+ compatible = "renesas,gpio-r8a7792",
+ "renesas,gpio-rcar";
+ reg = <0 0xe6055600 0 0x50>;
+ interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 352 30>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&mstp9_clks R8A7792_CLK_GPIO11>;
+ power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+ };
+
dmac0: dma-controller@e6700000 {
compatible = "renesas,dmac-r8a7792",
"renesas,rcar-dmac";
WARNING: multiple messages have this Message-ID (diff)
From: sergei.shtylyov@cogentembedded.com (Sergei Shtylyov)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 1/2] ARM: dts: r8a7792: add GPIO support
Date: Wed, 06 Jul 2016 01:02:20 +0300 [thread overview]
Message-ID: <11674399.J5QsPL1iTr@wasted.cogentembedded.com> (raw)
In-Reply-To: <19087307.ZHtRY0pPL5@wasted.cogentembedded.com>
Describe all 12 GPIO controllers in the R8A7792 device tree.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
Changes in version 2:
- added Geert's tag.
arch/arm/boot/dts/r8a7792.dtsi | 168 +++++++++++++++++++++++++++++++++++++++++
1 file changed, 168 insertions(+)
Index: renesas/arch/arm/boot/dts/r8a7792.dtsi
===================================================================
--- renesas.orig/arch/arm/boot/dts/r8a7792.dtsi
+++ renesas/arch/arm/boot/dts/r8a7792.dtsi
@@ -113,6 +113,174 @@
reg = <0 0xe6060000 0 0x144>;
};
+ gpio0: gpio at e6050000 {
+ compatible = "renesas,gpio-r8a7792",
+ "renesas,gpio-rcar";
+ reg = <0 0xe6050000 0 0x50>;
+ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 0 29>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&mstp9_clks R8A7792_CLK_GPIO0>;
+ power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+ };
+
+ gpio1: gpio at e6051000 {
+ compatible = "renesas,gpio-r8a7792",
+ "renesas,gpio-rcar";
+ reg = <0 0xe6051000 0 0x50>;
+ interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 32 23>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&mstp9_clks R8A7792_CLK_GPIO1>;
+ power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+ };
+
+ gpio2: gpio at e6052000 {
+ compatible = "renesas,gpio-r8a7792",
+ "renesas,gpio-rcar";
+ reg = <0 0xe6052000 0 0x50>;
+ interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 64 32>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&mstp9_clks R8A7792_CLK_GPIO2>;
+ power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+ };
+
+ gpio3: gpio at e6053000 {
+ compatible = "renesas,gpio-r8a7792",
+ "renesas,gpio-rcar";
+ reg = <0 0xe6053000 0 0x50>;
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 96 28>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&mstp9_clks R8A7792_CLK_GPIO3>;
+ power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+ };
+
+ gpio4: gpio at e6054000 {
+ compatible = "renesas,gpio-r8a7792",
+ "renesas,gpio-rcar";
+ reg = <0 0xe6054000 0 0x50>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 128 17>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&mstp9_clks R8A7792_CLK_GPIO4>;
+ power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+ };
+
+ gpio5: gpio at e6055000 {
+ compatible = "renesas,gpio-r8a7792",
+ "renesas,gpio-rcar";
+ reg = <0 0xe6055000 0 0x50>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 160 17>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&mstp9_clks R8A7792_CLK_GPIO5>;
+ power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+ };
+
+ gpio6: gpio at e6055100 {
+ compatible = "renesas,gpio-r8a7792",
+ "renesas,gpio-rcar";
+ reg = <0 0xe6055100 0 0x50>;
+ interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 192 17>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&mstp9_clks R8A7792_CLK_GPIO6>;
+ power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+ };
+
+ gpio7: gpio at e6055200 {
+ compatible = "renesas,gpio-r8a7792",
+ "renesas,gpio-rcar";
+ reg = <0 0xe6055200 0 0x50>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 224 17>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&mstp9_clks R8A7792_CLK_GPIO7>;
+ power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+ };
+
+ gpio8: gpio at e6055300 {
+ compatible = "renesas,gpio-r8a7792",
+ "renesas,gpio-rcar";
+ reg = <0 0xe6055300 0 0x50>;
+ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 256 17>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&mstp9_clks R8A7792_CLK_GPIO8>;
+ power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+ };
+
+ gpio9: gpio at e6055400 {
+ compatible = "renesas,gpio-r8a7792",
+ "renesas,gpio-rcar";
+ reg = <0 0xe6055400 0 0x50>;
+ interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 288 17>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&mstp9_clks R8A7792_CLK_GPIO9>;
+ power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+ };
+
+ gpio10: gpio at e6055500 {
+ compatible = "renesas,gpio-r8a7792",
+ "renesas,gpio-rcar";
+ reg = <0 0xe6055500 0 0x50>;
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 320 32>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&mstp9_clks R8A7792_CLK_GPIO10>;
+ power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+ };
+
+ gpio11: gpio at e6055600 {
+ compatible = "renesas,gpio-r8a7792",
+ "renesas,gpio-rcar";
+ reg = <0 0xe6055600 0 0x50>;
+ interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 352 30>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&mstp9_clks R8A7792_CLK_GPIO11>;
+ power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+ };
+
dmac0: dma-controller at e6700000 {
compatible = "renesas,dmac-r8a7792",
"renesas,rcar-dmac";
next prev parent reply other threads:[~2016-07-05 22:02 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-07-05 21:59 [PATCH v2 0/2] Add R8A7792 GPIO support Sergei Shtylyov
2016-07-05 21:59 ` Sergei Shtylyov
2016-07-05 22:01 ` [PATCH v2 1/2] ARM: dts: r8a7792: add GPIO clocks Sergei Shtylyov
2016-07-05 22:01 ` Sergei Shtylyov
2016-07-05 22:02 ` Sergei Shtylyov [this message]
2016-07-05 22:02 ` [PATCH v2 1/2] ARM: dts: r8a7792: add GPIO support Sergei Shtylyov
2016-07-18 2:09 ` [PATCH v2 0/2] Add R8A7792 " Simon Horman
2016-07-18 2:09 ` Simon Horman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=11674399.J5QsPL1iTr@wasted.cogentembedded.com \
--to=sergei.shtylyov@cogentembedded.com \
--cc=devicetree@vger.kernel.org \
--cc=horms@verge.net.au \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=magnus.damm@gmail.com \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.