From: Daniel Golle <daniel@makrotopia.org> To: Sean Wang <sean.wang@kernel.org>, Linus Walleij <linus.walleij@linaro.org>, Matthias Brugger <matthias.bgg@gmail.com>, AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>, linux-mediatek@lists.infradead.org, linux-gpio@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org Subject: [PATCH] pinctrl: mediatek: mt7981: add additional uart groups Date: Sat, 26 Aug 2023 21:44:31 +0100 [thread overview] Message-ID: <11db447f257231e08065989100311df57b7f1f1c.1693082594.git.daniel@makrotopia.org> (raw) Add uart2_0_tx_rx (pin 4, 5) and uart1_2 (pins 9, 10) groups to the pinctrl driver for the MediaTek MT7981 SoC. Signed-off-by: Daniel Golle <daniel@makrotopia.org> --- drivers/pinctrl/mediatek/pinctrl-mt7981.c | 16 +++++++++++++--- 1 file changed, 13 insertions(+), 3 deletions(-) diff --git a/drivers/pinctrl/mediatek/pinctrl-mt7981.c b/drivers/pinctrl/mediatek/pinctrl-mt7981.c index 0fd2c0c451f95..7e59a44078590 100644 --- a/drivers/pinctrl/mediatek/pinctrl-mt7981.c +++ b/drivers/pinctrl/mediatek/pinctrl-mt7981.c @@ -611,6 +611,9 @@ static int mt7981_wo0_jtag_1_funcs[] = { 5, 5, 5, 5, 5, }; static int mt7981_uart2_0_pins[] = { 4, 5, 6, 7, }; static int mt7981_uart2_0_funcs[] = { 3, 3, 3, 3, }; +static int mt7981_uart2_0_tx_rx_pins[] = { 4, 5, }; +static int mt7981_uart2_0_tx_rx_funcs[] = { 3, 3, }; + /* GBE_LED0 */ static int mt7981_gbe_led0_pins[] = { 8, }; static int mt7981_gbe_led0_funcs[] = { 3, }; @@ -731,6 +734,9 @@ static int mt7981_uart1_0_funcs[] = { 4, 4, 4, 4, }; static int mt7981_uart1_1_pins[] = { 26, 27, 28, 29, }; static int mt7981_uart1_1_funcs[] = { 2, 2, 2, 2, }; +static int mt7981_uart1_2_pins[] = { 9, 10, }; +static int mt7981_uart1_2_funcs[] = { 2, 2, }; + /* UART2 */ static int mt7981_uart2_1_pins[] = { 22, 23, 24, 25, }; static int mt7981_uart2_1_funcs[] = { 3, 3, 3, 3, }; @@ -805,6 +811,8 @@ static const struct group_desc mt7981_groups[] = { PINCTRL_PIN_GROUP("wo0_jtag_0", mt7981_wo0_jtag_0), /* @GPIO(4,7) WM_JTAG(3) */ PINCTRL_PIN_GROUP("uart2_0", mt7981_uart2_0), + /* @GPIO(4,5) WM_JTAG(4) */ + PINCTRL_PIN_GROUP("uart2_0_tx_rx", mt7981_uart2_0_tx_rx), /* @GPIO(8) GBE_LED0(3) */ PINCTRL_PIN_GROUP("gbe_led0", mt7981_gbe_led0), /* @GPIO(4,6) PTA_EXT(4) */ @@ -861,6 +869,8 @@ static const struct group_desc mt7981_groups[] = { PINCTRL_PIN_GROUP("uart1_0", mt7981_uart1_0), /* @GPIO(26,29): UART1(2) */ PINCTRL_PIN_GROUP("uart1_1", mt7981_uart1_1), + /* @GPIO(9,10): UART1(2) */ + PINCTRL_PIN_GROUP("uart1_2", mt7981_uart1_2), /* @GPIO(22,25): UART1(3) */ PINCTRL_PIN_GROUP("uart2_1", mt7981_uart2_1), /* @GPIO(22,24) PTA_EXT(4) */ @@ -922,9 +932,9 @@ static const struct group_desc mt7981_groups[] = { */ static const char *mt7981_wa_aice_groups[] = { "wa_aice1", "wa_aice2", "wm_aice1_1", "wa_aice3", "wm_aice1_2", }; -static const char *mt7981_uart_groups[] = { "wm_uart_0", "uart2_0", - "net_wo0_uart_txd_0", "net_wo0_uart_txd_1", "net_wo0_uart_txd_2", - "uart1_0", "uart1_1", "uart2_1", "wm_aurt_1", "wm_aurt_2", "uart0", }; +static const char *mt7981_uart_groups[] = { "net_wo0_uart_txd_0", "net_wo0_uart_txd_1", + "net_wo0_uart_txd_2", "uart0", "uart1_0", "uart1_1", "uart1_2", "uart2_0", + "uart2_0_tx_rx", "uart2_1", "wm_uart_0", "wm_aurt_1", "wm_aurt_2", }; static const char *mt7981_dfd_groups[] = { "dfd", "dfd_ntrst", }; static const char *mt7981_wdt_groups[] = { "watchdog", "watchdog1", }; static const char *mt7981_pcie_groups[] = { "pcie_pereset", "pcie_clk", "pcie_wake", }; -- 2.41.0
WARNING: multiple messages have this Message-ID (diff)
From: Daniel Golle <daniel@makrotopia.org> To: Sean Wang <sean.wang@kernel.org>, Linus Walleij <linus.walleij@linaro.org>, Matthias Brugger <matthias.bgg@gmail.com>, AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>, linux-mediatek@lists.infradead.org, linux-gpio@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org Subject: [PATCH] pinctrl: mediatek: mt7981: add additional uart groups Date: Sat, 26 Aug 2023 21:44:31 +0100 [thread overview] Message-ID: <11db447f257231e08065989100311df57b7f1f1c.1693082594.git.daniel@makrotopia.org> (raw) Add uart2_0_tx_rx (pin 4, 5) and uart1_2 (pins 9, 10) groups to the pinctrl driver for the MediaTek MT7981 SoC. Signed-off-by: Daniel Golle <daniel@makrotopia.org> --- drivers/pinctrl/mediatek/pinctrl-mt7981.c | 16 +++++++++++++--- 1 file changed, 13 insertions(+), 3 deletions(-) diff --git a/drivers/pinctrl/mediatek/pinctrl-mt7981.c b/drivers/pinctrl/mediatek/pinctrl-mt7981.c index 0fd2c0c451f95..7e59a44078590 100644 --- a/drivers/pinctrl/mediatek/pinctrl-mt7981.c +++ b/drivers/pinctrl/mediatek/pinctrl-mt7981.c @@ -611,6 +611,9 @@ static int mt7981_wo0_jtag_1_funcs[] = { 5, 5, 5, 5, 5, }; static int mt7981_uart2_0_pins[] = { 4, 5, 6, 7, }; static int mt7981_uart2_0_funcs[] = { 3, 3, 3, 3, }; +static int mt7981_uart2_0_tx_rx_pins[] = { 4, 5, }; +static int mt7981_uart2_0_tx_rx_funcs[] = { 3, 3, }; + /* GBE_LED0 */ static int mt7981_gbe_led0_pins[] = { 8, }; static int mt7981_gbe_led0_funcs[] = { 3, }; @@ -731,6 +734,9 @@ static int mt7981_uart1_0_funcs[] = { 4, 4, 4, 4, }; static int mt7981_uart1_1_pins[] = { 26, 27, 28, 29, }; static int mt7981_uart1_1_funcs[] = { 2, 2, 2, 2, }; +static int mt7981_uart1_2_pins[] = { 9, 10, }; +static int mt7981_uart1_2_funcs[] = { 2, 2, }; + /* UART2 */ static int mt7981_uart2_1_pins[] = { 22, 23, 24, 25, }; static int mt7981_uart2_1_funcs[] = { 3, 3, 3, 3, }; @@ -805,6 +811,8 @@ static const struct group_desc mt7981_groups[] = { PINCTRL_PIN_GROUP("wo0_jtag_0", mt7981_wo0_jtag_0), /* @GPIO(4,7) WM_JTAG(3) */ PINCTRL_PIN_GROUP("uart2_0", mt7981_uart2_0), + /* @GPIO(4,5) WM_JTAG(4) */ + PINCTRL_PIN_GROUP("uart2_0_tx_rx", mt7981_uart2_0_tx_rx), /* @GPIO(8) GBE_LED0(3) */ PINCTRL_PIN_GROUP("gbe_led0", mt7981_gbe_led0), /* @GPIO(4,6) PTA_EXT(4) */ @@ -861,6 +869,8 @@ static const struct group_desc mt7981_groups[] = { PINCTRL_PIN_GROUP("uart1_0", mt7981_uart1_0), /* @GPIO(26,29): UART1(2) */ PINCTRL_PIN_GROUP("uart1_1", mt7981_uart1_1), + /* @GPIO(9,10): UART1(2) */ + PINCTRL_PIN_GROUP("uart1_2", mt7981_uart1_2), /* @GPIO(22,25): UART1(3) */ PINCTRL_PIN_GROUP("uart2_1", mt7981_uart2_1), /* @GPIO(22,24) PTA_EXT(4) */ @@ -922,9 +932,9 @@ static const struct group_desc mt7981_groups[] = { */ static const char *mt7981_wa_aice_groups[] = { "wa_aice1", "wa_aice2", "wm_aice1_1", "wa_aice3", "wm_aice1_2", }; -static const char *mt7981_uart_groups[] = { "wm_uart_0", "uart2_0", - "net_wo0_uart_txd_0", "net_wo0_uart_txd_1", "net_wo0_uart_txd_2", - "uart1_0", "uart1_1", "uart2_1", "wm_aurt_1", "wm_aurt_2", "uart0", }; +static const char *mt7981_uart_groups[] = { "net_wo0_uart_txd_0", "net_wo0_uart_txd_1", + "net_wo0_uart_txd_2", "uart0", "uart1_0", "uart1_1", "uart1_2", "uart2_0", + "uart2_0_tx_rx", "uart2_1", "wm_uart_0", "wm_aurt_1", "wm_aurt_2", }; static const char *mt7981_dfd_groups[] = { "dfd", "dfd_ntrst", }; static const char *mt7981_wdt_groups[] = { "watchdog", "watchdog1", }; static const char *mt7981_pcie_groups[] = { "pcie_pereset", "pcie_clk", "pcie_wake", }; -- 2.41.0 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2023-08-26 20:45 UTC|newest] Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top 2023-08-26 20:44 Daniel Golle [this message] 2023-08-26 20:44 ` [PATCH] pinctrl: mediatek: mt7981: add additional uart groups Daniel Golle 2023-09-11 13:44 ` Linus Walleij 2023-09-11 13:44 ` Linus Walleij
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=11db447f257231e08065989100311df57b7f1f1c.1693082594.git.daniel@makrotopia.org \ --to=daniel@makrotopia.org \ --cc=angelogioacchino.delregno@collabora.com \ --cc=linus.walleij@linaro.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-gpio@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-mediatek@lists.infradead.org \ --cc=matthias.bgg@gmail.com \ --cc=sean.wang@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.