All of lore.kernel.org
 help / color / mirror / Atom feed
From: Sheng Yang <sheng@linux.intel.com>
To: Avi Kivity <avi@redhat.com>
Cc: Anthony Liguori <anthony@codemonkey.ws>,
	kvm@vger.kernel.org, Sheng Yang <sheng@linux.intel.com>
Subject: [PATCH 5/6] Support for device capability
Date: Wed,  7 Jan 2009 18:49:30 +0800	[thread overview]
Message-ID: <1231325371-22896-6-git-send-email-sheng@linux.intel.com> (raw)
In-Reply-To: <1231325371-22896-1-git-send-email-sheng@linux.intel.com>

This framework can be easily extended to support device capability, like
MSI/MSI-x.

Signed-off-by: Sheng Yang <sheng@linux.intel.com>
---
 qemu/hw/pci.c |   85 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 qemu/hw/pci.h |   30 ++++++++++++++++++++
 2 files changed, 115 insertions(+), 0 deletions(-)

diff --git a/qemu/hw/pci.c b/qemu/hw/pci.c
index 8589dfa..d755516 100644
--- a/qemu/hw/pci.c
+++ b/qemu/hw/pci.c
@@ -351,11 +351,65 @@ static void pci_update_mappings(PCIDevice *d)
     }
 }
 
+int pci_access_cap_config(PCIDevice *pci_dev, uint32_t address, int len)
+{
+    if (pci_dev->cap.supported && address >= pci_dev->cap.start &&
+            (address + len) < pci_dev->cap.start + pci_dev->cap.length)
+        return 1;
+    return 0;
+}
+
+uint32_t pci_default_cap_read_config(PCIDevice *pci_dev,
+                                     uint32_t address, int len)
+{
+    uint32_t val = 0;
+
+    if (pci_access_cap_config(pci_dev, address, len)) {
+        switch(len) {
+        default:
+        case 4:
+            if (address < pci_dev->cap.start + pci_dev->cap.length - 4) {
+                val = le32_to_cpu(*(uint32_t *)(pci_dev->cap.config
+                            + address - pci_dev->cap.start));
+                break;
+            }
+            /* fall through */
+        case 2:
+            if (address < pci_dev->cap.start + pci_dev->cap.length - 2) {
+                val = le16_to_cpu(*(uint16_t *)(pci_dev->cap.config
+                            + address - pci_dev->cap.start));
+                break;
+            }
+            /* fall through */
+        case 1:
+            val = pci_dev->cap.config[address - pci_dev->cap.start];
+            break;
+        }
+    }
+    return val;
+}
+
+void pci_default_cap_write_config(PCIDevice *pci_dev,
+                                  uint32_t address, uint32_t val, int len)
+{
+    if (pci_access_cap_config(pci_dev, address, len)) {
+        int i;
+        for (i = 0; i < len; i++) {
+            pci_dev->cap.config[address + i - pci_dev->cap.start] = val;
+            val >>= 8;
+        }
+        return;
+    }
+}
+
 uint32_t pci_default_read_config(PCIDevice *d,
                                  uint32_t address, int len)
 {
     uint32_t val;
 
+    if (pci_access_cap_config(d, address, len))
+        return d->cap.config_read(d, address, len);
+
     switch(len) {
     default:
     case 4:
@@ -409,6 +463,11 @@ void pci_default_write_config(PCIDevice *d,
         return;
     }
  default_config:
+    if (pci_access_cap_config(d, address, len)) {
+        d->cap.config_write(d, address, val, len);
+        return;
+    }
+
     /* not efficient, but simple */
     addr = address;
     for(i = 0; i < len; i++) {
@@ -828,3 +887,29 @@ PCIBus *pci_bridge_init(PCIBus *bus, int devfn, uint32_t id,
     s->bus = pci_register_secondary_bus(&s->dev, map_irq);
     return s->bus;
 }
+
+void pci_enable_capability_support(PCIDevice *pci_dev,
+                                   uint32_t config_start,
+                                   PCICapConfigReadFunc *config_read,
+                                   PCICapConfigWriteFunc *config_write,
+                                   PCICapConfigInitFunc *config_init)
+{
+    if (!pci_dev)
+        return;
+
+    if (config_start >= 0x40 && config_start < 0xff)
+        pci_dev->cap.start = config_start;
+    else
+        pci_dev->cap.start = PCI_CAPABILITY_CONFIG_DEFAULT_START_ADDR;
+    if (config_read)
+        pci_dev->cap.config_read = config_read;
+    else
+        pci_dev->cap.config_read = pci_default_cap_read_config;
+    if (config_write)
+        pci_dev->cap.config_write = config_write;
+    else
+        pci_dev->cap.config_write = pci_default_cap_write_config;
+    pci_dev->cap.supported = 1;
+    pci_dev->config[0x34] = pci_dev->cap.start;
+    config_init(pci_dev);
+}
diff --git a/qemu/hw/pci.h b/qemu/hw/pci.h
index 1f33819..f2a622c 100644
--- a/qemu/hw/pci.h
+++ b/qemu/hw/pci.h
@@ -28,6 +28,12 @@ typedef void PCIMapIORegionFunc(PCIDevice *pci_dev, int region_num,
                                 uint32_t addr, uint32_t size, int type);
 typedef int PCIUnregisterFunc(PCIDevice *pci_dev);
 
+typedef void PCICapConfigWriteFunc(PCIDevice *pci_dev,
+                                   uint32_t address, uint32_t val, int len);
+typedef uint32_t PCICapConfigReadFunc(PCIDevice *pci_dev,
+                                      uint32_t address, int len);
+typedef void PCICapConfigInitFunc(PCIDevice *pci_dev);
+
 #define PCI_ADDRESS_SPACE_MEM		0x00
 #define PCI_ADDRESS_SPACE_IO		0x01
 #define PCI_ADDRESS_SPACE_MEM_PREFETCH	0x08
@@ -78,6 +84,10 @@ typedef struct PCIIORegion {
 
 #define PCI_COMMAND_RESERVED_MASK_HI (PCI_COMMAND_RESERVED >> 8)
 
+#define PCI_CAPABILITY_CONFIG_MAX_LENGTH 0x60
+#define PCI_CAPABILITY_CONFIG_DEFAULT_START_ADDR 0x40
+#define PCI_CAPABILITY_CONFIG_MSI_LENGTH 0x10
+
 struct PCIDevice {
     /* PCI config space */
     uint8_t config[256];
@@ -100,6 +110,15 @@ struct PCIDevice {
 
     /* Current IRQ levels.  Used internally by the generic PCI code.  */
     int irq_state[4];
+
+    /* Device capability configuration space */
+    struct {
+        int supported;
+        uint8_t config[PCI_CAPABILITY_CONFIG_MAX_LENGTH];
+        unsigned int start, length;
+        PCICapConfigReadFunc *config_read;
+        PCICapConfigWriteFunc *config_write;
+    } cap;
 };
 
 PCIDevice *pci_register_device(PCIBus *bus, const char *name,
@@ -113,6 +132,12 @@ void pci_register_io_region(PCIDevice *pci_dev, int region_num,
                             uint32_t size, int type,
                             PCIMapIORegionFunc *map_func);
 
+void pci_enable_capability_support(PCIDevice *pci_dev,
+                                   uint32_t config_start,
+                                   PCICapConfigReadFunc *config_read,
+                                   PCICapConfigWriteFunc *config_write,
+                                   PCICapConfigInitFunc *config_init);
+
 int pci_map_irq(PCIDevice *pci_dev, int pin);
 uint32_t pci_default_read_config(PCIDevice *d,
                                  uint32_t address, int len);
@@ -120,6 +145,11 @@ void pci_default_write_config(PCIDevice *d,
                               uint32_t address, uint32_t val, int len);
 void pci_device_save(PCIDevice *s, QEMUFile *f);
 int pci_device_load(PCIDevice *s, QEMUFile *f);
+uint32_t pci_default_cap_read_config(PCIDevice *pci_dev,
+                                     uint32_t address, int len);
+void pci_default_cap_write_config(PCIDevice *pci_dev,
+                                  uint32_t address, uint32_t val, int len);
+int pci_access_cap_config(PCIDevice *pci_dev, uint32_t address, int len);
 
 typedef void (*pci_set_irq_fn)(qemu_irq *pic, int irq_num, int level);
 typedef int (*pci_map_irq_fn)(PCIDevice *pci_dev, int irq_num);
-- 
1.5.4.5


  parent reply	other threads:[~2009-01-07 10:49 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-01-07 10:49 [PATCH 0/6][v3] Userspace support for MSI Sheng Yang
2009-01-07 10:49 ` [PATCH 1/6] kvm: Replace force type convert with container_of() Sheng Yang
2009-01-07 10:49 ` [PATCH 2/6] Make device assignment depend on libpci Sheng Yang
2009-01-07 10:49 ` [PATCH 3/6] kvm: ioctl for gsi_route Sheng Yang
2009-01-07 10:49 ` [PATCH 4/6] Figure out device capability Sheng Yang
2009-01-07 10:49 ` Sheng Yang [this message]
2009-01-07 10:49 ` [PATCH 6/6] kvm: expose MSI capability to guest Sheng Yang
  -- strict thread matches above, loose matches on Subject: below --
2008-12-23  8:21 [PATCH 0/6][v3] Userspace support for MSI Sheng Yang
2008-12-23  8:21 ` [PATCH 5/6] Support for device capability Sheng Yang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1231325371-22896-6-git-send-email-sheng@linux.intel.com \
    --to=sheng@linux.intel.com \
    --cc=anthony@codemonkey.ws \
    --cc=avi@redhat.com \
    --cc=kvm@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.