All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Peter 'p2' De Schrijver" <peter.de-schrijver@nokia.com>
To: linux-omap@vger.kernel.org
Cc: Peter 'p2' De Schrijver <peter.de-schrijver@nokia.com>
Subject: [PATCH 1/1] OMAP3 PM Add C0 state
Date: Wed, 18 Feb 2009 18:21:58 +0200	[thread overview]
Message-ID: <1234974118-27446-2-git-send-email-peter.de-schrijver@nokia.com> (raw)
In-Reply-To: <1234974118-27446-1-git-send-email-peter.de-schrijver@nokia.com>


Signed-off-by: Peter 'p2' De Schrijver <peter.de-schrijver@nokia.com>
---
 arch/arm/mach-omap2/cpuidle34xx.c |   53 ++++++++++++++++++++++++++++++-------
 1 files changed, 43 insertions(+), 10 deletions(-)

diff --git a/arch/arm/mach-omap2/cpuidle34xx.c b/arch/arm/mach-omap2/cpuidle34xx.c
index 62fbb2e..0b5fd52 100644
--- a/arch/arm/mach-omap2/cpuidle34xx.c
+++ b/arch/arm/mach-omap2/cpuidle34xx.c
@@ -26,6 +26,7 @@
 #include <mach/pm.h>
 #include <mach/prcm.h>
 #include <mach/powerdomain.h>
+#include <mach/clockdomain.h>
 #include <mach/control.h>
 #include <mach/serial.h>
 
@@ -34,9 +35,10 @@
 #ifdef CONFIG_CPU_IDLE
 
 #define OMAP3_MAX_STATES 7
-#define OMAP3_STATE_C1 1 /* C1 - MPU WFI + Core active */
-#define OMAP3_STATE_C2 2 /* C2 - MPU CSWR + Core active */
-#define OMAP3_STATE_C3 3 /* C3 - MPU OFF + Core active */
+#define OMAP3_STATE_C0 0 /* C0 - MPU WFI + Core active */
+#define OMAP3_STATE_C1 1 /* C1 - MPU WFI + Core inactive */
+#define OMAP3_STATE_C2 2 /* C2 - MPU CSWR + Core inactive */
+#define OMAP3_STATE_C3 3 /* C3 - MPU OFF + Core inactive */
 #define OMAP3_STATE_C4 4 /* C4 - MPU RET + Core RET */
 #define OMAP3_STATE_C5 5 /* C5 - MPU OFF + Core RET */
 #define OMAP3_STATE_C6 6 /* C6 - MPU OFF + Core OFF */
@@ -63,6 +65,16 @@ static int omap3_idle_bm_check(void)
 	return 0;
 }
 
+static int _cpuidle_allow_idle(struct powerdomain *pwrdm, struct clockdomain *clkdm)
+{
+	omap2_clkdm_allow_idle(clkdm);
+}
+
+static int _cpuidle_deny_idle(struct powerdomain *pwrdm, struct clockdomain *clkdm)
+{
+	omap2_clkdm_deny_idle(clkdm);
+}
+
 /**
  * omap3_enter_idle - Programs OMAP3 to enter the specified state
  * @dev: cpuidle device
@@ -99,9 +111,19 @@ static int omap3_enter_idle(struct cpuidle_device *dev,
 	if (omap_irq_pending())
 		goto return_sleep_time;
 
+	if (cx->type == OMAP3_STATE_C0) {
+		pwrdm_for_each_clkdm(mpu_pd, _cpuidle_deny_idle);
+		pwrdm_for_each_clkdm(core_pd, _cpuidle_deny_idle);
+	}
+
 	/* Execute ARM wfi */
 	omap_sram_idle();
 
+	if (cx->type == OMAP3_STATE_C0) {
+		pwrdm_for_each_clkdm(mpu_pd, _cpuidle_allow_idle);
+		pwrdm_for_each_clkdm(core_pd, _cpuidle_allow_idle);
+	}
+	
 return_sleep_time:
 	getnstimeofday(&ts_postidle);
 	ts_idle = timespec_sub(ts_postidle, ts_preidle);
@@ -140,16 +162,27 @@ DEFINE_PER_CPU(struct cpuidle_device, omap3_idle_dev);
 /* omap3_init_power_states - Initialises the OMAP3 specific C states.
  *
  * Below is the desciption of each C state.
- *	C1 . MPU WFI + Core active
- *	C2 . MPU CSWR + Core active
- *	C3 . MPU OFF + Core active
+ * 	C0 . MPU WFI + Core active
+ *	C1 . MPU WFI + Core inactive
+ *	C2 . MPU CSWR + Core inactive
+ *	C3 . MPU OFF + Core inactive
  *	C4 . MPU CSWR + Core CSWR
  *	C5 . MPU OFF + Core CSWR
  *	C6 . MPU OFF + Core OFF
  */
 void omap_init_power_states(void)
 {
-	/* C1 . MPU WFI + Core active */
+	/* C0 . MPU WFI + Core active */
+	omap3_power_states[OMAP3_STATE_C0].valid = 1;
+	omap3_power_states[OMAP3_STATE_C0].type = OMAP3_STATE_C0;
+	omap3_power_states[OMAP3_STATE_C0].sleep_latency = 2;
+	omap3_power_states[OMAP3_STATE_C0].wakeup_latency = 2;
+	omap3_power_states[OMAP3_STATE_C0].threshold = 5;
+	omap3_power_states[OMAP3_STATE_C0].mpu_state = PWRDM_POWER_ON;
+	omap3_power_states[OMAP3_STATE_C0].core_state = PWRDM_POWER_ON;
+	omap3_power_states[OMAP3_STATE_C0].flags = CPUIDLE_FLAG_TIME_VALID;
+
+	/* C1 . MPU WFI + Core inactive */
 	omap3_power_states[OMAP3_STATE_C1].valid = 1;
 	omap3_power_states[OMAP3_STATE_C1].type = OMAP3_STATE_C1;
 	omap3_power_states[OMAP3_STATE_C1].sleep_latency = 10;
@@ -159,7 +192,7 @@ void omap_init_power_states(void)
 	omap3_power_states[OMAP3_STATE_C1].core_state = PWRDM_POWER_ON;
 	omap3_power_states[OMAP3_STATE_C1].flags = CPUIDLE_FLAG_TIME_VALID;
 
-	/* C2 . MPU CSWR + Core active */
+	/* C2 . MPU CSWR + Core inactive */
 	omap3_power_states[OMAP3_STATE_C2].valid = 1;
 	omap3_power_states[OMAP3_STATE_C2].type = OMAP3_STATE_C2;
 	omap3_power_states[OMAP3_STATE_C2].sleep_latency = 50;
@@ -170,7 +203,7 @@ void omap_init_power_states(void)
 	omap3_power_states[OMAP3_STATE_C2].flags = CPUIDLE_FLAG_TIME_VALID |
 				CPUIDLE_FLAG_CHECK_BM;
 
-	/* C3 . MPU OFF + Core active */
+	/* C3 . MPU OFF + Core inactive */
 	omap3_power_states[OMAP3_STATE_C3].valid = 1;
 	omap3_power_states[OMAP3_STATE_C3].type = OMAP3_STATE_C3;
 	omap3_power_states[OMAP3_STATE_C3].sleep_latency = 1500;
@@ -244,7 +277,7 @@ int omap3_idle_init(void)
 
 	dev = &per_cpu(omap3_idle_dev, smp_processor_id());
 
-	for (i = 1; i < OMAP3_MAX_STATES; i++) {
+	for (i = 0; i < OMAP3_MAX_STATES; i++) {
 		cx = &omap3_power_states[i];
 		state = &dev->states[count];
 
-- 
1.5.6.3


  reply	other threads:[~2009-02-18 16:22 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-02-18 16:21 [PATCH 0/1] OMAP3 PM Add C0 state Peter 'p2' De Schrijver
2009-02-18 16:21 ` Peter 'p2' De Schrijver [this message]
2009-02-23 18:24 ` Kevin Hilman
2009-02-24 10:27   ` Peter 'p2' De Schrijver

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1234974118-27446-2-git-send-email-peter.de-schrijver@nokia.com \
    --to=peter.de-schrijver@nokia.com \
    --cc=linux-omap@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.