From: Koen Kooi <koen@beagleboard.org>
To: linux-omap@vger.kernel.org
Cc: Koen Kooi <koen@openembedded.org>, Koen Kooi <koen@beagleboard.org>
Subject: [PATCH v2] ARM: OMAP: board-ldp: add regulator info to get the microSD slot working again
Date: Tue, 31 Mar 2009 10:45:02 +0200 [thread overview]
Message-ID: <1238489102-11652-1-git-send-email-koen@beagleboard.org> (raw)
From: Koen Kooi <koen@openembedded.org>
The ldp board was left behind when other boards got updated. The ldp info was copied from the beagleboard board file and s/beagle/ldp/g
Changes since v1:
* dropped vsim portion since only 4 pins are hooked up
Signed-off-by: Koen Kooi <koen@beagleboard.org>
---
arch/arm/mach-omap2/board-ldp.c | 32 ++++++++++++++++++++++++++++++++
1 files changed, 32 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index 30926b0..19a5c15 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -22,6 +22,7 @@
#include <linux/clk.h>
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
+#include <linux/regulator/machine.h>
#include <linux/i2c/twl4030.h>
#include <mach/hardware.h>
@@ -450,7 +451,16 @@ static struct twl4030_script *twl4030_scripts[] __initdata = {
&wrst_script,
};
+static const struct twl4030_resconfig ldp_resconfig[] = {
+ /* disable regulators that u-boot left enabled; the
+ * devices' drivers should be managing these.
+ */
+ { .resource = RES_VMMC1, },
+ { 0, },
+};
+
static struct twl4030_power_data sdp3430_t2scripts_data __initdata = {
+ .resource_config = ldp_resconfig,
.scripts = twl4030_scripts,
.size = ARRAY_SIZE(twl4030_scripts),
};
@@ -474,6 +484,25 @@ static struct twl4030_madc_platform_data ldp_madc_data = {
.irq_line = 1,
};
+static struct regulator_consumer_supply ldp_vmmc1_supply = {
+ .supply = "vmmc",
+};
+
+/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
+static struct regulator_init_data ldp_vmmc1 = {
+ .constraints = {
+ .min_uV = 1850000,
+ .max_uV = 3150000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
+ | REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &ldp_vmmc1_supply,
+};
+
static struct twl4030_platform_data ldp_twldata = {
.irq_base = TWL4030_IRQ_BASE,
.irq_end = TWL4030_IRQ_END,
@@ -483,6 +512,7 @@ static struct twl4030_platform_data ldp_twldata = {
.madc = &ldp_madc_data,
.usb = &ldp_usb_data,
.power = &sdp3430_t2scripts_data,
+ .vmmc1 = &ldp_vmmc1,
.gpio = &ldp_gpio_data,
.keypad = &ldp_kp_twl4030_data,
};
@@ -530,6 +560,8 @@ static void __init omap_ldp_init(void)
omap_serial_init();
usb_musb_init();
twl4030_mmc_init(mmc);
+ /* link regulators to MMC adapters */
+ ldp_vmmc1_supply.dev = mmc[0].dev;
}
static void __init omap_ldp_map_io(void)
--
1.6.2
reply other threads:[~2009-03-31 8:42 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1238489102-11652-1-git-send-email-koen@beagleboard.org \
--to=koen@beagleboard.org \
--cc=koen@openembedded.org \
--cc=linux-omap@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.