All of lore.kernel.org
 help / color / mirror / Atom feed
From: Tero Kristo <tero.kristo@nokia.com>
To: linux-omap@vger.kernel.org
Subject: [PATCH] OMAP3: SPI: Restore also CHxCONF register when restoring context
Date: Wed,  1 Jul 2009 14:29:10 +0300	[thread overview]
Message-ID: <1246447750-12197-1-git-send-email-tero.kristo@nokia.com> (raw)
In-Reply-To: <>

From: Tero Kristo <tero.kristo@nokia.com>

Previous restore was lazy and only restored CHxCONF when it was needed by a
specific chip select. This could cause occasional errors on an SPI bus where
multiple chip selects are in use.

Applies on top of PM branch.

Signed-off-by: Tero Kristo <tero.kristo@nokia.com>
---
 drivers/spi/omap2_mcspi.c |   16 ++++++++++++++++
 1 files changed, 16 insertions(+), 0 deletions(-)

diff --git a/drivers/spi/omap2_mcspi.c b/drivers/spi/omap2_mcspi.c
index a75c546..7853fb7 100644
--- a/drivers/spi/omap2_mcspi.c
+++ b/drivers/spi/omap2_mcspi.c
@@ -134,6 +134,7 @@ struct omap2_mcspi_cs {
 	void __iomem		*base;
 	unsigned long		phys;
 	int			word_len;
+	struct list_head	node;
 	/* Context save and restore shadow register */
 	u32			chconf0;
 };
@@ -145,6 +146,7 @@ struct omap2_mcspi_regs {
 	u32 sysconfig;
 	u32 modulctrl;
 	u32 wakeupenable;
+	struct list_head cs;
 };
 
 static struct omap2_mcspi_regs omap2_mcspi_ctx[OMAP2_MCSPI_MAX_CTRL];
@@ -255,6 +257,7 @@ static void omap2_mcspi_set_master_mode(struct spi_master *master)
 static void omap2_mcspi_restore_ctx(struct omap2_mcspi *mcspi)
 {
 	struct spi_master *spi_cntrl;
+	struct omap2_mcspi_cs *cs;
 	spi_cntrl = mcspi->master;
 
 	/* McSPI: context restore */
@@ -266,6 +269,10 @@ static void omap2_mcspi_restore_ctx(struct omap2_mcspi *mcspi)
 
 	mcspi_write_reg(spi_cntrl, OMAP2_MCSPI_WAKEUPENABLE,
 			omap2_mcspi_ctx[spi_cntrl->bus_num - 1].wakeupenable);
+
+	list_for_each_entry(cs, &omap2_mcspi_ctx[spi_cntrl->bus_num - 1].cs,
+			node)
+		__raw_writel(cs->chconf0, cs->base + OMAP2_MCSPI_CHCONF0);
 }
 static void omap2_mcspi_disable_clocks(struct omap2_mcspi *mcspi)
 {
@@ -706,6 +713,9 @@ static int omap2_mcspi_setup(struct spi_device *spi)
 		cs->phys = mcspi->phys + spi->chip_select * 0x14;
 		cs->chconf0 = 0;
 		spi->controller_state = cs;
+		/* Link this to context save list */
+		list_add_tail(&cs->node,
+			&omap2_mcspi_ctx[mcspi->master->bus_num - 1].cs);
 	}
 
 	if (mcspi_dma->dma_rx_channel == -1
@@ -728,10 +738,15 @@ static void omap2_mcspi_cleanup(struct spi_device *spi)
 {
 	struct omap2_mcspi	*mcspi;
 	struct omap2_mcspi_dma	*mcspi_dma;
+	struct omap2_mcspi_cs	*cs;
 
 	mcspi = spi_master_get_devdata(spi->master);
 	mcspi_dma = &mcspi->dma_channels[spi->chip_select];
 
+	/* Unlink controller state from context save list */
+	cs = spi->controller_state;
+	list_del(&cs->node);
+
 	kfree(spi->controller_state);
 
 	if (mcspi_dma->dma_rx_channel != -1) {
@@ -1093,6 +1108,7 @@ static int __init omap2_mcspi_probe(struct platform_device *pdev)
 
 	spin_lock_init(&mcspi->lock);
 	INIT_LIST_HEAD(&mcspi->msg_queue);
+	INIT_LIST_HEAD(&omap2_mcspi_ctx[master->bus_num - 1].cs);
 
 	mcspi->ick = clk_get(&pdev->dev, "ick");
 	if (IS_ERR(mcspi->ick)) {
-- 
1.5.4.3


             reply	other threads:[~2009-07-01 12:02 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-07-01 11:29 Tero Kristo [this message]
2009-07-07 21:59 ` [PATCH] OMAP3: SPI: Restore also CHxCONF register when restoring context Kevin Hilman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1246447750-12197-1-git-send-email-tero.kristo@nokia.com \
    --to=tero.kristo@nokia.com \
    --cc=linux-omap@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.