From: Sanjeev Premi <premi@ti.com>
To: linux-omap@vger.kernel.org
Cc: Sanjeev Premi <premi@ti.com>
Subject: [PATCH v2] Runtime detection of Si features
Date: Mon, 17 Aug 2009 17:20:58 +0530 [thread overview]
Message-ID: <1250509858-7951-1-git-send-email-premi@ti.com> (raw)
The OMAP35x family has multiple variants differing
in the HW features. This patch detects these features
at runtime and prints information during the boot.
Since most of the code seemed repetitive, macros
have been used for readability.
Signed-off-by: Sanjeev Premi <premi@ti.com>
---
arch/arm/mach-omap2/id.c | 52 +++++++++++++++++++++++++++--
arch/arm/mach-omap2/mmc-twl4030.c | 1 +
arch/arm/plat-omap/include/mach/control.h | 34 +++++++++++++++++++
arch/arm/plat-omap/include/mach/cpu.h | 23 +++++++++++++
4 files changed, 107 insertions(+), 3 deletions(-)
diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
index a98201c..03b80f2 100644
--- a/arch/arm/mach-omap2/id.c
+++ b/arch/arm/mach-omap2/id.c
@@ -28,6 +28,7 @@
static struct omap_chip_id omap_chip;
static unsigned int omap_revision;
+u32 omap3_features;
unsigned int omap_rev(void)
{
@@ -155,7 +156,33 @@ void __init omap24xx_check_revision(void)
pr_info("\n");
}
-void __init omap34xx_check_revision(void)
+#define OMAP3_CHECK_FEATURE(status,feat) \
+ if (((status & OMAP3_ ##feat## _MASK) \
+ >> OMAP3_ ##feat## _SHIFT) != FEAT_ ##feat## _NONE) { \
+ omap3_features |= OMAP3_HAS_ ##feat; \
+ }
+
+void __init omap3_check_features(void)
+{
+ u32 status;
+
+ omap3_features = 0;
+
+ status = omap_ctrl_readl(OMAP3_CONTROL_OMAP_STATUS);
+
+ OMAP3_CHECK_FEATURE(status, L2CACHE);
+ OMAP3_CHECK_FEATURE(status, IVA);
+ OMAP3_CHECK_FEATURE(status, SGX);
+ OMAP3_CHECK_FEATURE(status, NEON);
+ OMAP3_CHECK_FEATURE(status, ISP);
+
+ /*
+ * TODO: Get additional info (where applicable)
+ * e.g. Size of L2 cache.
+ */
+}
+
+void __init omap3_check_revision(void)
{
u32 cpuid, idcode;
u16 hawkeye;
@@ -212,6 +239,22 @@ out:
pr_info("OMAP%04x %s\n", omap_rev() >> 16, rev_name);
}
+#define OMAP3_SHOW_FEATURE(feat) \
+ if (omap3_has_ ##feat()) { \
+ pr_info (" - "#feat" : Y"); \
+ } else { \
+ pr_info (" - "#feat" : N"); \
+ }
+
+void __init omap3_cpuinfo(void)
+{
+ OMAP3_SHOW_FEATURE(l2cache);
+ OMAP3_SHOW_FEATURE(iva);
+ OMAP3_SHOW_FEATURE(sgx);
+ OMAP3_SHOW_FEATURE(neon);
+ OMAP3_SHOW_FEATURE(isp);
+}
+
/*
* Try to detect the exact revision of the omap we're running on
*/
@@ -223,8 +266,11 @@ void __init omap2_check_revision(void)
*/
if (cpu_is_omap24xx())
omap24xx_check_revision();
- else if (cpu_is_omap34xx())
- omap34xx_check_revision();
+ else if (cpu_is_omap34xx()) {
+ omap3_check_features();
+ omap3_check_revision();
+ omap3_cpuinfo();
+ }
else if (cpu_is_omap44xx()) {
printk(KERN_INFO "FIXME: CPU revision = OMAP4430\n");
return;
diff --git a/arch/arm/mach-omap2/mmc-twl4030.c b/arch/arm/mach-omap2/mmc-twl4030.c
index 3c04c2f..d68284d 100644
--- a/arch/arm/mach-omap2/mmc-twl4030.c
+++ b/arch/arm/mach-omap2/mmc-twl4030.c
@@ -10,6 +10,7 @@
* published by the Free Software Foundation.
*/
#include <linux/err.h>
+#include <linux/bitops.h>
#include <linux/io.h>
#include <linux/module.h>
#include <linux/platform_device.h>
diff --git a/arch/arm/plat-omap/include/mach/control.h b/arch/arm/plat-omap/include/mach/control.h
index 826d317..74ec2f9 100644
--- a/arch/arm/plat-omap/include/mach/control.h
+++ b/arch/arm/plat-omap/include/mach/control.h
@@ -202,6 +202,40 @@
#define OMAP3_PADCONF_WAKEUPEVENT0 (1 << 15)
#define OMAP3_PADCONF_WAKEUPENABLE0 (1 << 14)
+/*
+ * CONTROL OMAP STATUS register to identify OMAP3 features
+ */
+#define OMAP3_CONTROL_OMAP_STATUS 0x044c
+
+#define OMAP3_SGX_SHIFT 13
+#define OMAP3_SGX_MASK (3 << OMAP3_SGX_SHIFT)
+#define FEAT_SGX_FULL 0
+#define FEAT_SGX_HALF 1
+#define FEAT_SGX_NONE 2
+
+#define OMAP3_IVA_SHIFT 12
+#define OMAP3_IVA_MASK (1 << OMAP3_SGX_SHIFT)
+#define FEAT_IVA 0
+#define FEAT_IVA_NONE 1
+
+#define OMAP3_L2CACHE_SHIFT 10
+#define OMAP3_L2CACHE_MASK (3 << OMAP3_L2CACHE_SHIFT)
+#define FEAT_L2CACHE_NONE 0
+#define FEAT_L2CACHE_64KB 1
+#define FEAT_L2CACHE_128KB 2
+#define FEAT_L2CACHE_256KB 3
+
+#define OMAP3_ISP_SHIFT 5
+#define OMAP3_ISP_MASK (1<< OMAP3_ISP_SHIFT)
+#define FEAT_ISP 0
+#define FEAT_ISP_NONE 1
+
+#define OMAP3_NEON_SHIFT 4
+#define OMAP3_NEON_MASK (1<< OMAP3_NEON_SHIFT)
+#define FEAT_NEON 0
+#define FEAT_NEON_NONE 1
+
+
#ifndef __ASSEMBLY__
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
defined(CONFIG_ARCH_OMAP4)
diff --git a/arch/arm/plat-omap/include/mach/cpu.h b/arch/arm/plat-omap/include/mach/cpu.h
index 4fbc6a9..4a04f77 100644
--- a/arch/arm/plat-omap/include/mach/cpu.h
+++ b/arch/arm/plat-omap/include/mach/cpu.h
@@ -432,4 +432,27 @@ IS_OMAP_TYPE(3430, 0x3430)
int omap_chip_is(struct omap_chip_id oci);
void omap2_check_revision(void);
+/*
+ * Runtime detection of OMAP3 features
+ */
+extern u32 omap3_features;
+
+#define OMAP3_HAS_L2CACHE BIT(0)
+#define OMAP3_HAS_IVA BIT(1)
+#define OMAP3_HAS_SGX BIT(2)
+#define OMAP3_HAS_NEON BIT(3)
+#define OMAP3_HAS_ISP BIT(4)
+
+#define OMAP3_HAS_FEATURE(feat,flag) \
+static inline unsigned int omap3_has_ ##feat(void) \
+{ \
+ return (omap3_features & OMAP3_HAS_ ##flag); \
+} \
+
+OMAP3_HAS_FEATURE(l2cache, L2CACHE)
+OMAP3_HAS_FEATURE(sgx, SGX)
+OMAP3_HAS_FEATURE(iva, IVA)
+OMAP3_HAS_FEATURE(neon, NEON)
+OMAP3_HAS_FEATURE(isp, ISP)
+
#endif /* __ASM_ARCH_OMAP_CPU_H */
--
1.6.2.2
next reply other threads:[~2009-08-17 11:51 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-08-17 11:50 Sanjeev Premi [this message]
2009-08-25 11:36 ` [PATCH v2] Runtime detection of Si features Premi, Sanjeev
2009-09-22 20:09 ` Tony Lindgren
2009-09-23 13:41 ` Premi, Sanjeev
2009-09-23 17:10 ` Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1250509858-7951-1-git-send-email-premi@ti.com \
--to=premi@ti.com \
--cc=linux-omap@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.