From: Anuj Aggarwal <anuj.aggarwal@ti.com> To: broonie@sirena.org.uk, lrg@slimlogic.co.uk, linux-omap@vger.kernel.org, linux-kernel@vger.kernel.org, felipe.balbi@nokia.com, tony@atomide.com, linux-i2c@vger.kernel.org Cc: Anuj Aggarwal <anuj.aggarwal@ti.com> Subject: [PATCHv3 3/3] Regulator: Adding TPS65023 and TPS6507x in Kconfig and Makefile Date: Fri, 21 Aug 2009 00:39:44 +0530 [thread overview] Message-ID: <1250795384-29924-1-git-send-email-anuj.aggarwal@ti.com> (raw) Adding TPS65023 and TPS6507x regulator driver support in drivers/regulator/Makefile and drivers/regulator/Kconfig Signed-off-by: Anuj Aggarwal <anuj.aggarwal@ti.com> --- drivers/regulator/Kconfig | 16 ++++++++++++++++ drivers/regulator/Makefile | 3 +++ 2 files changed, 19 insertions(+), 0 deletions(-) diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index f431779..8568f3e 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -117,4 +117,20 @@ config REGULATOR_LP3971 Say Y here to support the voltage regulators and convertors on National Semiconductors LP3971 PMIC +config REGULATOR_TPS65023 + tristate "TI TPS65023 Power regulators" + depends on I2C + help + This driver supports TPS65023 voltage regulator chips. TPS65023 provides + three step-down converters and two general-purpose LDO voltage regulators. + It supports TI's software based Class-2 SmartReflex implementation. + +config REGULATOR_TPS6507X + tristate "TI TPS6507X Power regulators" + depends on I2C + help + This driver supports TPS6507X voltage regulator chips. TPS6507X provides + three step-down converters and two general-purpose LDO voltage regulators. + It supports TI's software based Class-2 SmartReflex implementation. + endif diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index 4d762c4..5263913 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -17,4 +17,7 @@ obj-$(CONFIG_REGULATOR_WM8400) += wm8400-regulator.o obj-$(CONFIG_REGULATOR_DA903X) += da903x.o obj-$(CONFIG_REGULATOR_PCF50633) += pcf50633-regulator.o +obj-$(CONFIG_REGULATOR_TPS65023) += tps65023-regulator.o +obj-$(CONFIG_REGULATOR_TPS6507X) += tps6507x-regulator.o + ccflags-$(CONFIG_REGULATOR_DEBUG) += -DDEBUG -- 1.6.2.4
WARNING: multiple messages have this Message-ID (diff)
From: Anuj Aggarwal <anuj.aggarwal-l0cyMroinI0@public.gmane.org> To: broonie-GFdadSzt00ze9xe1eoZjHA@public.gmane.org, lrg-kDsPt+C1G03kYMGBc/C6ZA@public.gmane.org, linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, felipe.balbi-xNZwKgViW5gAvxtiuMwx3w@public.gmane.org, tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org, linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org Cc: Anuj Aggarwal <anuj.aggarwal-l0cyMroinI0@public.gmane.org> Subject: [PATCHv3 3/3] Regulator: Adding TPS65023 and TPS6507x in Kconfig and Makefile Date: Fri, 21 Aug 2009 00:39:44 +0530 [thread overview] Message-ID: <1250795384-29924-1-git-send-email-anuj.aggarwal@ti.com> (raw) Adding TPS65023 and TPS6507x regulator driver support in drivers/regulator/Makefile and drivers/regulator/Kconfig Signed-off-by: Anuj Aggarwal <anuj.aggarwal-l0cyMroinI0@public.gmane.org> --- drivers/regulator/Kconfig | 16 ++++++++++++++++ drivers/regulator/Makefile | 3 +++ 2 files changed, 19 insertions(+), 0 deletions(-) diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index f431779..8568f3e 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -117,4 +117,20 @@ config REGULATOR_LP3971 Say Y here to support the voltage regulators and convertors on National Semiconductors LP3971 PMIC +config REGULATOR_TPS65023 + tristate "TI TPS65023 Power regulators" + depends on I2C + help + This driver supports TPS65023 voltage regulator chips. TPS65023 provides + three step-down converters and two general-purpose LDO voltage regulators. + It supports TI's software based Class-2 SmartReflex implementation. + +config REGULATOR_TPS6507X + tristate "TI TPS6507X Power regulators" + depends on I2C + help + This driver supports TPS6507X voltage regulator chips. TPS6507X provides + three step-down converters and two general-purpose LDO voltage regulators. + It supports TI's software based Class-2 SmartReflex implementation. + endif diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index 4d762c4..5263913 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -17,4 +17,7 @@ obj-$(CONFIG_REGULATOR_WM8400) += wm8400-regulator.o obj-$(CONFIG_REGULATOR_DA903X) += da903x.o obj-$(CONFIG_REGULATOR_PCF50633) += pcf50633-regulator.o +obj-$(CONFIG_REGULATOR_TPS65023) += tps65023-regulator.o +obj-$(CONFIG_REGULATOR_TPS6507X) += tps6507x-regulator.o + ccflags-$(CONFIG_REGULATOR_DEBUG) += -DDEBUG -- 1.6.2.4
next reply other threads:[~2009-08-20 19:10 UTC|newest] Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top 2009-08-20 19:09 Anuj Aggarwal [this message] 2009-08-20 19:09 ` [PATCHv3 3/3] Regulator: Adding TPS65023 and TPS6507x in Kconfig and Makefile Anuj Aggarwal 2009-08-20 19:26 ` Mark Brown
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1250795384-29924-1-git-send-email-anuj.aggarwal@ti.com \ --to=anuj.aggarwal@ti.com \ --cc=broonie@sirena.org.uk \ --cc=felipe.balbi@nokia.com \ --cc=linux-i2c@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-omap@vger.kernel.org \ --cc=lrg@slimlogic.co.uk \ --cc=tony@atomide.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.