All of lore.kernel.org
 help / color / mirror / Atom feed
From: Nishanth Menon <nm@ti.com>
To: linux-omap <linux-omap@vger.kernel.org>
Cc: Nishanth Menon <nm@ti.com>, Benoit Cousson <b-cousson@ti.com>,
	Kevin Hilman <khilman@deeprootsystems.com>,
	Madhusudhan Chikkature Rajashekar <madhu.cr@ti.com>,
	Paul Walmsley <paul@pwsan.com>, Romit Dasgupta <romit@ti.com>,
	Sanjeev Premi <premi@ti.com>,
	Santosh Shilimkar <santosh.shilimkar@ti.com>,
	Sergio Alberto Aguirre Rodriguez <saaguirre@ti.com>,
	Thara Gopinath <thara@ti.com>,
	Vishwanath Sripathy <vishwanath.bs@ti.com>
Subject: [PATCH 04/10 V3] omap3: pm: srf: use opp accessor functions
Date: Tue, 24 Nov 2009 22:09:13 -0600	[thread overview]
Message-ID: <1259122159-1583-5-git-send-email-nm@ti.com> (raw)
In-Reply-To: <1259122159-1583-4-git-send-email-nm@ti.com>

With the accessor functions, many of the direct accesses are
redundant. However we do not want to rewrite SRF at this point of time
We do the following here:
Remove get_opp and introduce three SRF specific accessor functions:
	opp_to_freq, freq_to_opp - need this coz of usage of opp IDs
	NOTE: These functions should be removed at a later point
	of time.
get_opp is removed because, with the above functions, it is
redundant.

NOTE: this implementation is just a start and leaves scope for
further cleanups which can be added on top.

NOTE: this increases the number of warnings to:

arch/arm/mach-omap2/resource34xx.c: In function 'opp_to_freq':
arch/arm/mach-omap2/resource34xx.c:182: warning: 'opp_id' is deprecated (declared at arch/arm/plat-omap/include/plat/opp.h:33)
arch/arm/mach-omap2/resource34xx.c: In function 'freq_to_opp':
arch/arm/mach-omap2/resource34xx.c:213: warning: 'opp_id' is deprecated (declared at arch/arm/plat-omap/include/plat/opp.h:33)
arch/arm/mach-omap2/resource34xx.c: In function 'init_opp':
arch/arm/mach-omap2/resource34xx.c:242: warning: 'freq_to_opp' is deprecated (declared at arch/arm/mach-omap2/resource34xx.c:205)
arch/arm/mach-omap2/resource34xx.c:249: warning: 'freq_to_opp' is deprecated (declared at arch/arm/mach-omap2/resource34xx.c:205)
arch/arm/mach-omap2/resource34xx.c: In function 'program_opp_freq':
arch/arm/mach-omap2/resource34xx.c:302: warning: 'opp_to_freq' is deprecated (declared at arch/arm/mach-omap2/resource34xx.c:175)
arch/arm/mach-omap2/resource34xx.c:303: warning: 'opp_to_freq' is deprecated (declared at arch/arm/mach-omap2/resource34xx.c:175)
arch/arm/mach-omap2/resource34xx.c:308: warning: 'opp_to_freq' is deprecated (declared at arch/arm/mach-omap2/resource34xx.c:175)
arch/arm/mach-omap2/resource34xx.c: In function 'program_opp':
arch/arm/mach-omap2/resource34xx.c:351: warning: 'opp_id' is deprecated (declared at arch/arm/plat-omap/include/plat/opp.h:33)
arch/arm/mach-omap2/resource34xx.c:352: warning: 'opp_id' is deprecated (declared at arch/arm/plat-omap/include/plat/opp.h:33)
arch/arm/mach-omap2/resource34xx.c:356: warning: 'opp_to_freq' is deprecated (declared at arch/arm/mach-omap2/resource34xx.c:175)
arch/arm/mach-omap2/resource34xx.c:380: warning: 'opp_to_freq' is deprecated (declared at arch/arm/mach-omap2/resource34xx.c:175)
arch/arm/mach-omap2/resource34xx.c: In function 'resource_set_opp_level':
arch/arm/mach-omap2/resource34xx.c:417: warning: 'opp_to_freq' is deprecated (declared at arch/arm/mach-omap2/resource34xx.c:175)
arch/arm/mach-omap2/resource34xx.c:418: warning: 'opp_to_freq' is deprecated (declared at arch/arm/mach-omap2/resource34xx.c:175)
arch/arm/mach-omap2/resource34xx.c:420: warning: 'opp_to_freq' is deprecated (declared at arch/arm/mach-omap2/resource34xx.c:175)
arch/arm/mach-omap2/resource34xx.c: In function 'set_opp':
arch/arm/mach-omap2/resource34xx.c:497: warning: 'freq_to_opp' is deprecated (declared at arch/arm/mach-omap2/resource34xx.c:205)
arch/arm/mach-omap2/resource34xx.c: In function 'validate_opp':
arch/arm/mach-omap2/resource34xx.c:516: warning: 'opp_to_freq' is deprecated (declared at arch/arm/mach-omap2/resource34xx.c:175)
arch/arm/mach-omap2/resource34xx.c:518: warning: 'opp_to_freq' is deprecated (declared at arch/arm/mach-omap2/resource34xx.c:175)
arch/arm/mach-omap2/resource34xx.c: In function 'init_freq':
arch/arm/mach-omap2/resource34xx.c:541: warning: 'opp_to_freq' is deprecated (declared at arch/arm/mach-omap2/resource34xx.c:175)
arch/arm/mach-omap2/resource34xx.c:544: warning: 'opp_to_freq' is deprecated (declared at arch/arm/mach-omap2/resource34xx.c:175)
arch/arm/mach-omap2/resource34xx.c: In function 'set_freq':
arch/arm/mach-omap2/resource34xx.c:560: warning: 'freq_to_opp' is deprecated (declared at arch/arm/mach-omap2/resource34xx.c:205)
arch/arm/mach-omap2/resource34xx.c:565: warning: 'freq_to_opp' is deprecated (declared at arch/arm/mach-omap2/resource34xx.c:205)
arch/arm/mach-omap2/resource34xx.c: In function 'validate_freq':
arch/arm/mach-omap2/resource34xx.c:579: warning: 'freq_to_opp' is deprecated (declared at arch/arm/mach-omap2/resource34xx.c:205)
arch/arm/mach-omap2/resource34xx.c:581: warning: 'freq_to_opp' is deprecated (declared at arch/arm/mach-omap2/resource34xx.c:205)

Cc: Benoit Cousson <b-cousson@ti.com>
Cc: Kevin Hilman <khilman@deeprootsystems.com>
Cc: Madhusudhan Chikkature Rajashekar <madhu.cr@ti.com>
Cc: Paul Walmsley <paul@pwsan.com>
Cc: Romit Dasgupta <romit@ti.com>
Cc: Sanjeev Premi <premi@ti.com>
Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
Cc: Sergio Alberto Aguirre Rodriguez <saaguirre@ti.com>
Cc: Thara Gopinath <thara@ti.com>
Cc: Vishwanath Sripathy <vishwanath.bs@ti.com>

Signed-off-by: Nishanth Menon <nm@ti.com>
---
 arch/arm/mach-omap2/resource34xx.c |  244 ++++++++++++++++++++++++++----------
 1 files changed, 180 insertions(+), 64 deletions(-)

diff --git a/arch/arm/mach-omap2/resource34xx.c b/arch/arm/mach-omap2/resource34xx.c
index af6b3c1..349f54e 100644
--- a/arch/arm/mach-omap2/resource34xx.c
+++ b/arch/arm/mach-omap2/resource34xx.c
@@ -155,21 +155,68 @@ static int curr_vdd1_opp;
 static int curr_vdd2_opp;
 static DEFINE_MUTEX(dvfs_mutex);
 
-static unsigned short get_opp(struct omap_opp *opp_freq_table,
+/* Introducing deprecated function because we got to.. */
+#define IS_OPP_TERMINATOR(opps, i) (!(opps)[(i)].enabled &&\
+		((opps)[(i)].rate == 0) && ((opps)[(i)].vsel == 0))
+
+/**
+ * opp_to_freq - convert OPPID to frequency (DEPRECATED)
+ * @freq: return frequency back to caller
+ * @opps: opp list
+ * @opp_id: OPP ID we are searching for
+ *
+ * return 0 and freq is populated if we find the opp_id, else,
+ * we return error
+ *
+ * NOTE: this function is a standin for the timebeing as opp_id is deprecated
+ */
+static int __deprecated opp_to_freq(unsigned long *freq,
+		const struct omap_opp *opps, u8 opp_id)
+{
+	int i = 1;
+
+	BUG_ON(!freq || !opps);
+
+	/* The first entry is a dummy one, loop till we hit terminator */
+	while (!IS_OPP_TERMINATOR(opps, i)) {
+		if (opps[i].enabled && (opps[i].opp_id == opp_id)) {
+			*freq = opps[i].rate;
+			return 0;
+		}
+		i++;
+	}
+
+	return -EINVAL;
+}
+
+/**
+ * freq_to_opp - convert a frequency back to OPP ID (DEPRECATED)
+ * @opp_id: opp ID returned back to caller
+ * @opps: opp list
+ * @freq: frequency we are searching for
+ *
+ * return 0 and opp_id is populated if we find the freq, else,
+ * we return error
+ *
+ * NOTE: this function is a standin for the timebeing as opp_id is deprecated
+ */
+static int __deprecated freq_to_opp(u8 *opp_id, const struct omap_opp *opps,
 		unsigned long freq)
 {
-	struct omap_opp *prcm_config;
-	prcm_config = opp_freq_table;
-
-	if (prcm_config->rate <= freq)
-		return prcm_config->opp_id; /* Return the Highest OPP */
-	for (; prcm_config->rate; prcm_config--)
-		if (prcm_config->rate < freq)
-			return (prcm_config+1)->opp_id;
-		else if (prcm_config->rate == freq)
-			return prcm_config->opp_id;
-	/* Return the least OPP */
-	return (prcm_config+1)->opp_id;
+	int i = 1;
+
+	BUG_ON(!opp_id || !opps);
+
+	/* The first entry is a dummy one, loop till we hit terminator */
+	while (!IS_OPP_TERMINATOR(opps, i)) {
+		if (opps[i].enabled && (opps[i].rate == freq)) {
+			*opp_id = opps[i].opp_id;
+			return 0;
+		}
+		i++;
+	}
+
+	return -EINVAL;
 }
 
 /**
@@ -178,6 +225,8 @@ static unsigned short get_opp(struct omap_opp *opp_freq_table,
 void init_opp(struct shared_resource *resp)
 {
 	struct clk *l3_clk;
+	int ret;
+	u8 opp_id;
 	resp->no_of_users = 0;
 
 	if (!mpu_opps || !dsp_opps || !l3_opps)
@@ -190,17 +239,18 @@ void init_opp(struct shared_resource *resp)
 		vdd1_resp = resp;
 		dpll1_clk = clk_get(NULL, "dpll1_ck");
 		dpll2_clk = clk_get(NULL, "dpll2_ck");
-		resp->curr_level = get_opp(mpu_opps + MAX_VDD1_OPP,
-				dpll1_clk->rate);
-		curr_vdd1_opp = resp->curr_level;
+		ret = freq_to_opp(&opp_id, mpu_opps, dpll1_clk->rate);
+		BUG_ON(ret); /* TBD Cleanup handling */
+		curr_vdd1_opp = opp_id;
 	} else if (strcmp(resp->name, "vdd2_opp") == 0) {
 		vdd2_resp = resp;
 		dpll3_clk = clk_get(NULL, "dpll3_m2_ck");
 		l3_clk = clk_get(NULL, "l3_ick");
-		resp->curr_level = get_opp(l3_opps + MAX_VDD2_OPP,
-				l3_clk->rate);
-		curr_vdd2_opp = resp->curr_level;
+		ret = freq_to_opp(&opp_id, l3_opps, l3_clk->rate);
+		BUG_ON(ret); /* TBD Cleanup handling */
+		curr_vdd2_opp = opp_id;
 	}
+	resp->curr_level = opp_id;
 	return;
 }
 
@@ -242,24 +292,40 @@ static int program_opp_freq(int res, int target_level, int current_level)
 {
 	int ret = 0, l3_div;
 	int *curr_opp;
+	unsigned long mpu_freq, dsp_freq, l3_freq;
+#ifndef CONFIG_CPU_FREQ
+	unsigned long mpu_cur_freq
+#endif
+
+	/* Check if I can actually switch or not */
+	if (res == VDD1_OPP) {
+		ret = opp_to_freq(&mpu_freq, mpu_opps, target_level);
+		ret |= opp_to_freq(&dsp_freq, dsp_opps, target_level);
+#ifndef CONFIG_CPU_FREQ
+		ret |= opp_to_freq(&mpu_cur_freq, mpu_opps, current_level);
+#endif
+	} else {
+		ret = opp_to_freq(&l3_freq, l3_opps, target_level);
+	}
+	/* we would have caught all bad levels earlier.. */
+	if (unlikely(ret))
+		return ret;
 
 	lock_scratchpad_sem();
 	if (res == VDD1_OPP) {
 		curr_opp = &curr_vdd1_opp;
-		clk_set_rate(dpll1_clk, mpu_opps[target_level].rate);
-		clk_set_rate(dpll2_clk, dsp_opps[target_level].rate);
+		clk_set_rate(dpll1_clk, mpu_freq);
+		clk_set_rate(dpll2_clk, dsp_freq);
 #ifndef CONFIG_CPU_FREQ
 		/*Update loops_per_jiffy if processor speed is being changed*/
 		loops_per_jiffy = compute_lpj(loops_per_jiffy,
-			mpu_opps[current_level].rate/1000,
-			mpu_opps[target_level].rate/1000);
+			mpu_cur_freq / 1000, mpu_freq / 1000);
 #endif
 	} else {
 		curr_opp = &curr_vdd2_opp;
 		l3_div = cm_read_mod_reg(CORE_MOD, CM_CLKSEL) &
 			OMAP3430_CLKSEL_L3_MASK;
-		ret = clk_set_rate(dpll3_clk,
-				l3_opps[target_level].rate * l3_div);
+		ret = clk_set_rate(dpll3_clk, l3_freq * l3_div);
 	}
 	if (ret) {
 		unlock_scratchpad_sem();
@@ -278,6 +344,7 @@ static int program_opp(int res, struct omap_opp *opp, int target_level,
 		int current_level)
 {
 	int i, ret = 0, raise;
+	unsigned long freq;
 #ifdef CONFIG_OMAP_SMARTREFLEX
 	unsigned long t_opp, c_opp;
 
@@ -285,13 +352,10 @@ static int program_opp(int res, struct omap_opp *opp, int target_level,
 	c_opp = ID_VDD(res) | ID_OPP_NO(opp[current_level].opp_id);
 #endif
 
-	/* Only allow enabled OPPs */
-	if (!opp[target_level].enabled)
-		return -EINVAL;
-
-	/* Sanity check of the OPP params before attempting to set */
-	if (!opp[target_level].rate || !opp[target_level].vsel)
-		return -EINVAL;
+	/* See if have a freq associated, if not, invalid opp */
+	ret = opp_to_freq(&freq, opp, target_level);
+	if (unlikely(ret))
+		return ret;
 
 	if (target_level > current_level)
 		raise = 1;
@@ -303,10 +367,23 @@ static int program_opp(int res, struct omap_opp *opp, int target_level,
 			ret = program_opp_freq(res, target_level,
 					current_level);
 #ifdef CONFIG_OMAP_SMARTREFLEX
-		else
-			sr_voltagescale_vcbypass(t_opp, c_opp,
-				opp[target_level].vsel,
-				opp[current_level].vsel);
+		else {
+			u8 vc, vt;
+			struct omap_opp *oppx;
+			/*
+			 * transitioning from good to good OPP
+			 * none of the following should fail..
+			 */
+			BUG_ON(opp_is_valid(&oppx, opp, freq));
+			vt = oppx->vsel;
+
+			BUG_ON(opp_to_freq(&freq, opp, current_level));
+			BUG_ON(opp_is_valid(&oppx, opp, freq));
+			vc = oppx->vsel;
+
+			/* ok to scale.. */
+			sr_voltagescale_vcbypass(t_opp, c_opp, vt, vc);
+		}
 #endif
 	}
 
@@ -315,7 +392,8 @@ static int program_opp(int res, struct omap_opp *opp, int target_level,
 
 int resource_set_opp_level(int res, u32 target_level, int flags)
 {
-	unsigned long mpu_freq, mpu_old_freq;
+	unsigned long mpu_freq, mpu_old_freq, l3_freq;
+	int ret;
 #ifdef CONFIG_CPU_FREQ
 	struct cpufreq_freqs freqs_notify;
 #endif
@@ -334,6 +412,16 @@ int resource_set_opp_level(int res, u32 target_level, int flags)
 	if (!mpu_opps || !dsp_opps || !l3_opps)
 		return 0;
 
+	/* Check if I can actually switch or not */
+	if (res == VDD1_OPP) {
+		ret = opp_to_freq(&mpu_freq, mpu_opps, target_level);
+		ret |= opp_to_freq(&mpu_old_freq, mpu_opps, resp->curr_level);
+	} else {
+		ret = opp_to_freq(&l3_freq, l3_opps, target_level);
+	}
+	if (ret)
+		return ret;
+
 	mutex_lock(&dvfs_mutex);
 
 	if (res == VDD1_OPP) {
@@ -341,9 +429,6 @@ int resource_set_opp_level(int res, u32 target_level, int flags)
 			mutex_unlock(&dvfs_mutex);
 			return 0;
 		}
-		mpu_old_freq = mpu_opps[resp->curr_level].rate;
-		mpu_freq = mpu_opps[target_level].rate;
-
 #ifdef CONFIG_CPU_FREQ
 		freqs_notify.old = mpu_old_freq/1000;
 		freqs_notify.new = mpu_freq/1000;
@@ -371,15 +456,13 @@ int resource_set_opp_level(int res, u32 target_level, int flags)
 
 int set_opp(struct shared_resource *resp, u32 target_level)
 {
-	unsigned long tput;
-	unsigned long req_l3_freq;
-	int ind;
+	int ret = -EINVAL;
 
 	if (resp == vdd1_resp) {
 		if (target_level < 3)
 			resource_release("vdd2_opp", &vdd2_dev);
 
-		resource_set_opp_level(VDD1_OPP, target_level, 0);
+		ret = resource_set_opp_level(VDD1_OPP, target_level, 0);
 		/*
 		 * For VDD1 OPP3 and above, make sure the interconnect
 		 * is at 100Mhz or above.
@@ -389,21 +472,33 @@ int set_opp(struct shared_resource *resp, u32 target_level)
 			resource_request("vdd2_opp", &vdd2_dev, 400000);
 
 	} else if (resp == vdd2_resp) {
-		tput = target_level;
+		unsigned long req_l3_freq;
+		struct omap_opp *oppx = NULL;
 
 		/* Convert the tput in KiB/s to Bus frequency in MHz */
-		req_l3_freq = (tput * 1000)/4;
-
-		for (ind = 2; ind <= MAX_VDD2_OPP; ind++)
-			if ((l3_opps + ind)->rate >= req_l3_freq) {
-				target_level = ind;
-				break;
+		req_l3_freq = (target_level * 1000)/4;
+
+		/* Do I have an exact match */
+		ret = opp_is_valid(&oppx, l3_opps, req_l3_freq);
+		if (ret) {
+			/* Do I have a next best match */
+			ret = opp_get_higher_opp(&oppx, &req_l3_freq, l3_opps);
+			if (ret) {
+				/* Give me the best we got */
+				req_l3_freq = ULONG_MAX;
+				ret = opp_get_lower_opp(&oppx, &req_l3_freq,
+						l3_opps);
 			}
+		}
 
-		/* Set the highest OPP possible */
-		if (ind > MAX_VDD2_OPP)
-			target_level = ind-1;
-		resource_set_opp_level(VDD2_OPP, target_level, 0);
+		/* uh uh.. no OPPs?? */
+		BUG_ON(ret);
+
+		ret = freq_to_opp((u8 *)&target_level, l3_opps, req_l3_freq);
+		/* we dont expect this to fail */
+		BUG_ON(ret);
+
+		ret = resource_set_opp_level(VDD2_OPP, target_level, 0);
 	}
 	return 0;
 }
@@ -416,6 +511,11 @@ int set_opp(struct shared_resource *resp, u32 target_level)
  */
 int validate_opp(struct shared_resource *resp, u32 target_level)
 {
+	unsigned long x;
+	if (strcmp(resp->name, "mpu_freq") == 0)
+		return opp_to_freq(&x, mpu_opps, target_level);
+	else if (strcmp(resp->name, "dsp_freq") == 0)
+		return opp_to_freq(&x, dsp_opps, target_level);
 	return 0;
 }
 
@@ -425,6 +525,8 @@ int validate_opp(struct shared_resource *resp, u32 target_level)
 void init_freq(struct shared_resource *resp)
 {
 	char *linked_res_name;
+	int ret = -EINVAL;
+	unsigned long freq;
 	resp->no_of_users = 0;
 
 	if (!mpu_opps || !dsp_opps)
@@ -436,32 +538,46 @@ void init_freq(struct shared_resource *resp)
 	*/
 	if (strcmp(resp->name, "mpu_freq") == 0)
 		/* MPU freq in Mhz */
-		resp->curr_level = mpu_opps[curr_vdd1_opp].rate;
+		ret = opp_to_freq(&freq, mpu_opps, curr_vdd1_opp);
 	else if (strcmp(resp->name, "dsp_freq") == 0)
 		/* DSP freq in Mhz */
-		resp->curr_level = dsp_opps[curr_vdd1_opp].rate;
+		ret = opp_to_freq(&freq, dsp_opps, curr_vdd1_opp);
+	BUG_ON(ret);
+
+	resp->curr_level = freq;
 	return;
 }
 
 int set_freq(struct shared_resource *resp, u32 target_level)
 {
-	unsigned int vdd1_opp;
+	u8 vdd1_opp;
+	int ret = -EINVAL;
 
 	if (!mpu_opps || !dsp_opps)
 		return 0;
 
 	if (strcmp(resp->name, "mpu_freq") == 0) {
-		vdd1_opp = get_opp(mpu_opps + MAX_VDD1_OPP, target_level);
-		resource_request("vdd1_opp", &dummy_mpu_dev, vdd1_opp);
+		ret = freq_to_opp(&vdd1_opp, mpu_opps, target_level);
+		if (!ret)
+			ret = resource_request("vdd1_opp", &dummy_mpu_dev,
+					vdd1_opp);
 	} else if (strcmp(resp->name, "dsp_freq") == 0) {
-		vdd1_opp = get_opp(dsp_opps + MAX_VDD1_OPP, target_level);
-		resource_request("vdd1_opp", &dummy_dsp_dev, vdd1_opp);
+		ret = freq_to_opp(&vdd1_opp, dsp_opps, target_level);
+		if (!ret)
+			ret = resource_request("vdd1_opp", &dummy_dsp_dev,
+					vdd1_opp);
 	}
-	resp->curr_level = target_level;
-	return 0;
+	if (!ret)
+		resp->curr_level = target_level;
+	return ret;
 }
 
 int validate_freq(struct shared_resource *resp, u32 target_level)
 {
+	u8 x;
+	if (strcmp(resp->name, "mpu_freq") == 0)
+		return freq_to_opp(&x, mpu_opps, target_level);
+	else if (strcmp(resp->name, "dsp_freq") == 0)
+		return freq_to_opp(&x, dsp_opps, target_level);
 	return 0;
 }
-- 
1.6.3.3


  reply	other threads:[~2009-11-25  4:09 UTC|newest]

Thread overview: 36+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-11-25  4:09 [PATCH 00/10 v3] omap3: pm: introduce support for 3630 OPPs Nishanth Menon
2009-11-25  4:09 ` [PATCH 01/10] omap3: pm: introduce enabled flag to omap_opp Nishanth Menon
2009-11-25  4:09   ` [PATCH 02/10 V3] omap3: pm: introduce opp accessor functions Nishanth Menon
2009-11-25  4:09     ` [PATCH 03/10 V3] omap3: pm: use opp accessor functions for omap34xx Nishanth Menon
2009-11-25  4:09       ` Nishanth Menon [this message]
2009-11-25  4:09         ` [PATCH 05/10 V3] omap3: pm: sr: replace get_opp with freq_to_opp Nishanth Menon
2009-11-25  4:09           ` [PATCH 06/10 V3] omap3: pm: use opp accessor functions for omap-target Nishanth Menon
2009-11-25  4:09             ` [PATCH 07/10 V3] omap3: clk: use pm accessor functions for cpufreq table Nishanth Menon
2009-11-25  4:09               ` [PATCH 08/10] omap3: pm: remove VDDx_MIN/MAX macros Nishanth Menon
2009-11-25  4:09                 ` [PATCH 09/10 V3] omap3: pm: introduce 3630 opps Nishanth Menon
2009-11-25  4:09                   ` [PATCH 10/10] omap3: pm: omap3630 boards: enable 3630 opp tables Nishanth Menon
2009-12-08  7:49                   ` [PATCH 09/10 V3] omap3: pm: introduce 3630 opps Eduardo Valentin
2009-12-08 10:59                     ` Menon, Nishanth
2009-12-08 11:18                       ` Eduardo Valentin
2009-12-08 11:31                         ` Menon, Nishanth
2009-12-08 11:40                           ` Eduardo Valentin
2009-12-08 14:15                             ` Nishanth Menon
2009-12-07 16:54               ` [PATCH 07/10 V3] omap3: clk: use pm accessor functions for cpufreq table Tero.Kristo
2009-12-08 11:09                 ` Menon, Nishanth
2009-12-08  7:54               ` Eduardo Valentin
2009-11-25 17:56             ` [PATCH 06/10 V3] omap3: pm: use opp accessor functions for omap-target Kevin Hilman
2009-12-08  7:59               ` Eduardo Valentin
2009-12-07 16:59         ` [PATCH 04/10 V3] omap3: pm: srf: use opp accessor functions Tero.Kristo
2009-12-08 11:14           ` Menon, Nishanth
2009-11-25 17:22       ` [PATCH 03/10 V3] omap3: pm: use opp accessor functions for omap34xx Kevin Hilman
2009-11-25 17:27         ` Kevin Hilman
2009-12-07 17:02         ` Tero.Kristo
2009-12-08 11:16           ` Menon, Nishanth
2009-12-08  8:08       ` Eduardo Valentin
2009-11-25 16:30     ` [PATCH 02/10 V3] omap3: pm: introduce opp accessor functions Kevin Hilman
2009-11-25 20:31       ` Nishanth Menon
2009-11-25 23:46         ` Kevin Hilman
2009-11-26  0:22           ` Menon, Nishanth
2009-12-08  8:23             ` Eduardo Valentin
2009-12-08 11:01               ` Menon, Nishanth
2009-11-25 15:24 ` [PATCH 00/10 v3] omap3: pm: introduce support for 3630 OPPs Kevin Hilman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1259122159-1583-5-git-send-email-nm@ti.com \
    --to=nm@ti.com \
    --cc=b-cousson@ti.com \
    --cc=khilman@deeprootsystems.com \
    --cc=linux-omap@vger.kernel.org \
    --cc=madhu.cr@ti.com \
    --cc=paul@pwsan.com \
    --cc=premi@ti.com \
    --cc=romit@ti.com \
    --cc=saaguirre@ti.com \
    --cc=santosh.shilimkar@ti.com \
    --cc=thara@ti.com \
    --cc=vishwanath.bs@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.