All of lore.kernel.org
 help / color / mirror / Atom feed
From: Tero Kristo <tero.kristo@nokia.com>
To: linux-omap@vger.kernel.org
Subject: [PATCHv7 5/7] OMAP: Powerdomains: Add support for checking if pwrdm/clkdm can idle
Date: Fri, 12 Mar 2010 17:39:15 +0200	[thread overview]
Message-ID: <1268408357-15621-5-git-send-email-tero.kristo@nokia.com> (raw)
In-Reply-To: <1268408357-15621-4-git-send-email-tero.kristo@nokia.com>

From: Tero Kristo <tero.kristo@nokia.com>

pwrdm_can_idle(pwrdm) will check if the specified powerdomain can enter
idle. This is done by checking all clockdomains under the powerdomain
if they can idle also.

omap2_clkdm_can_idle(clkdm) will check if the specified clockdomain can
enter idle. This checks the functional clocks and idle status bits of the
domain according to following rules:
1) functional clock check
  * get FCLK register content
  * ignore all clocks defined in idle_def.fclk_ignore
  * if any active functional clocks remain, domain can't idle
2) idle status check
  * get IDLEST register content
  * inverse it (any non-idle blocks are now as 1)
  * mask against idle_def.idlest_mask
  * if any bits remain high, domain can't idle

These calls can be used e.g. inside cpuidle to decide which power states
core and mpu should enter during idle, as there are certain dependencies
between wakeup capabilities and reset logic.

Signed-off-by: Tero Kristo <tero.kristo@nokia.com>
---
 arch/arm/mach-omap2/clockdomain.c             |   32 ++++++++
 arch/arm/mach-omap2/clockdomains.h            |  106 +++++++++++++++++++++++++
 arch/arm/mach-omap2/powerdomain.c             |   20 +++++
 arch/arm/plat-omap/include/plat/clockdomain.h |   17 ++++
 arch/arm/plat-omap/include/plat/powerdomain.h |    1 +
 5 files changed, 176 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-omap2/clockdomain.c b/arch/arm/mach-omap2/clockdomain.c
index a38a615..9ebff51 100644
--- a/arch/arm/mach-omap2/clockdomain.c
+++ b/arch/arm/mach-omap2/clockdomain.c
@@ -867,6 +867,38 @@ int omap2_clkdm_wakeup(struct clockdomain *clkdm)
 	return 0;
 }
 
+
+/**
+ * omap2_clkdm_can_idle - check if clockdomain has any active clocks or not
+ * @clkdm: struct clockdomain *
+ *
+ * Checks if the clockdomain has any active clock or not, i.e. whether it
+ * can enter idle. Returns -EINVAL if clkdm is NULL; 0 if unable to idle;
+ * 1 if can idle.
+ */
+int omap2_clkdm_can_idle(struct clockdomain *clkdm)
+{
+	int i;
+
+	if (!clkdm)
+		return -EINVAL;
+
+	for (i = 0; i < clkdm->clk_reg_num; i++) {
+		u32 idlest, fclk;
+
+		fclk = cm_read_mod_reg(clkdm->pwrdm.ptr->prcm_offs,
+				CM_FCLKEN + 4 * i);
+		if (fclk & ~clkdm->idle_def[i].fclk_ignore)
+			return 0;
+
+		idlest = cm_read_mod_reg(clkdm->pwrdm.ptr->prcm_offs,
+				CM_IDLEST + 4 * i);
+		if (~idlest & clkdm->idle_def[i].idlest_mask)
+			return 0;
+	}
+	return 1;
+}
+
 /**
  * omap2_clkdm_allow_idle - enable hwsup idle transitions for clkdm
  * @clkdm: struct clockdomain *
diff --git a/arch/arm/mach-omap2/clockdomains.h b/arch/arm/mach-omap2/clockdomains.h
index 8fc19ff..5e29de8 100644
--- a/arch/arm/mach-omap2/clockdomains.h
+++ b/arch/arm/mach-omap2/clockdomains.h
@@ -663,6 +663,12 @@ static struct clockdomain iva2_clkdm = {
 	.wkdep_srcs	= iva2_wkdeps,
 	.clktrctrl_mask = OMAP3430_CLKTRCTRL_IVA2_MASK,
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+	.clk_reg_num	= 1,
+	.idle_def	= {
+		[0] = {
+			.idlest_mask = OMAP3430_ST_IVA2,
+		},
+	},
 };
 
 static struct clockdomain gfx_3430es1_clkdm = {
@@ -686,6 +692,12 @@ static struct clockdomain sgx_clkdm = {
 	.sleepdep_srcs	= gfx_sgx_sleepdeps,
 	.clktrctrl_mask = OMAP3430ES2_CLKTRCTRL_SGX_MASK,
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_GE_OMAP3430ES2),
+	.clk_reg_num	= 1,
+	.idle_def	= {
+		[0] = {
+			.idlest_mask = OMAP3430ES2_ST_SGX_SHIFT,
+		},
+	},
 };
 
 /*
@@ -717,6 +729,57 @@ static struct clockdomain core_l3_3xxx_clkdm = {
 	.dep_bit	= OMAP3430_EN_CORE_SHIFT,
 	.clktrctrl_mask = OMAP3430_CLKTRCTRL_L3_MASK,
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+	.clk_reg_num	= 3,
+	.idle_def	= {
+		[0] = {
+			/* UARTs are controlled by idle loop so ignore */
+			.fclk_ignore = OMAP3430_EN_UART2 |
+				OMAP3430_EN_UART1,
+			/*
+			 * Reason for IDLEST ignores:
+			 * - SDRC and OMAPCTRL controlled by HW
+			 * - HSOTGUSB_IDLE bit is autoidled by HW
+			 * - MAILBOX is controlled by HW
+			 */
+			.idlest_mask =
+				OMAP3430ES2_ST_MMC3_MASK |
+				OMAP3430_ST_ICR_MASK |
+				OMAP3430_ST_AES2_MASK |
+				OMAP3430_ST_SHA12_MASK |
+				OMAP3430_ST_DES2_MASK |
+				OMAP3430_ST_MMC2_MASK |
+				OMAP3430_ST_MMC1_MASK |
+				OMAP3430_ST_MSPRO_MASK |
+				OMAP3430_ST_HDQ_MASK |
+				OMAP3430_ST_MCSPI4_MASK |
+				OMAP3430_ST_MCSPI3_MASK |
+				OMAP3430_ST_MCSPI2_MASK |
+				OMAP3430_ST_MCSPI1_MASK |
+				OMAP3430_ST_I2C3_MASK |
+				OMAP3430_ST_I2C2_MASK |
+				OMAP3430_ST_I2C1_MASK |
+				OMAP3430_ST_GPT11_MASK |
+				OMAP3430_ST_GPT10_MASK |
+				OMAP3430_ST_MCBSP5_MASK |
+				OMAP3430_ST_MCBSP1_MASK |
+				OMAP3430ES2_ST_SSI_IDLE_MASK |
+				OMAP3430ES2_ST_HSOTGUSB_STDBY_MASK |
+				OMAP3430_ST_D2D_MASK |
+				OMAP3430_ST_SDMA_MASK |
+				OMAP3430_ST_SSI_STDBY_MASK,
+		},
+		[1] = {
+			.idlest_mask = OMAP3430_ST_PKA_MASK |
+				OMAP3430_ST_AES1_MASK |
+				OMAP3430_ST_RNG_MASK |
+				OMAP3430_ST_SHA11_MASK |
+				OMAP3430_ST_DES1_MASK,
+		},
+		[2] = {
+			.idlest_mask = OMAP3430ES2_ST_USBTLL_MASK |
+				OMAP3430ES2_ST_CPEFUSE_MASK,
+		},
+	},
 };
 
 /*
@@ -746,6 +809,13 @@ static struct clockdomain dss_3xxx_clkdm = {
 	.sleepdep_srcs	= dss_sleepdeps,
 	.clktrctrl_mask = OMAP3430_CLKTRCTRL_DSS_MASK,
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+	.clk_reg_num	= 1,
+	.idle_def	= {
+		[0] = {
+			.idlest_mask = OMAP3430ES2_ST_DSS_IDLE_MASK |
+				OMAP3430ES2_ST_DSS_STDBY_MASK,
+		},
+	},
 };
 
 static struct clockdomain cam_clkdm = {
@@ -758,6 +828,12 @@ static struct clockdomain cam_clkdm = {
 	.sleepdep_srcs	= cam_sleepdeps,
 	.clktrctrl_mask = OMAP3430_CLKTRCTRL_CAM_MASK,
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+	.clk_reg_num	= 1,
+	.idle_def	= {
+		[0] = {
+			.idlest_mask = OMAP3430_ST_CAM,
+		},
+	},
 };
 
 static struct clockdomain usbhost_clkdm = {
@@ -770,6 +846,13 @@ static struct clockdomain usbhost_clkdm = {
 	.sleepdep_srcs	= usbhost_sleepdeps,
 	.clktrctrl_mask = OMAP3430ES2_CLKTRCTRL_USBHOST_MASK,
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_GE_OMAP3430ES2),
+	.clk_reg_num	= 1,
+	.idle_def	= {
+		[0] = {
+			.idlest_mask = OMAP3430ES2_ST_USBHOST_IDLE_MASK |
+				OMAP3430ES2_ST_USBHOST_STDBY_MASK,
+		},
+	},
 };
 
 static struct clockdomain per_clkdm = {
@@ -783,6 +866,29 @@ static struct clockdomain per_clkdm = {
 	.sleepdep_srcs	= per_sleepdeps,
 	.clktrctrl_mask = OMAP3430_CLKTRCTRL_PER_MASK,
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+	.clk_reg_num	= 1,
+	.idle_def	= {
+		[0] = {
+			.fclk_ignore = OMAP3430_ST_UART3_MASK,
+			/*
+			 * GPIO2...6 are dropped out from this mask
+			 * as they are always non-idle, UART3 is also
+			 * out as it is handled by idle loop
+			 * */
+			.idlest_mask = OMAP3430_ST_WDT3_MASK |
+				OMAP3430_ST_GPT9_MASK |
+				OMAP3430_ST_GPT8_MASK |
+				OMAP3430_ST_GPT7_MASK |
+				OMAP3430_ST_GPT6_MASK |
+				OMAP3430_ST_GPT5_MASK |
+				OMAP3430_ST_GPT4_MASK |
+				OMAP3430_ST_GPT3_MASK |
+				OMAP3430_ST_GPT2_MASK |
+				OMAP3430_ST_MCBSP4_MASK |
+				OMAP3430_ST_MCBSP3_MASK |
+				OMAP3430_ST_MCBSP2_MASK,
+		},
+	},
 };
 
 /*
diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c
index dc03289..a9ca884 100644
--- a/arch/arm/mach-omap2/powerdomain.c
+++ b/arch/arm/mach-omap2/powerdomain.c
@@ -919,6 +919,26 @@ int pwrdm_wait_transition(struct powerdomain *pwrdm)
 	return 0;
 }
 
+/**
+ * pwrdm_can_idle - check if the powerdomain can enter idle
+ * @pwrdm: struct powerdomain * the powerdomain to check status of
+ *
+ * Checks all associated clockdomains if they can idle or not.
+ * Returns 1 if the powerdomain can idle, 0 if not.
+ */
+int pwrdm_can_idle(struct powerdomain *pwrdm)
+{
+	int i;
+	int ret = 1;
+
+	for (i = 0; i < PWRDM_MAX_CLKDMS; i++)
+		if (pwrdm->pwrdm_clkdms[i] &&
+		    !omap2_clkdm_can_idle(pwrdm->pwrdm_clkdms[i]))
+			ret = 0;
+
+	return ret;
+}
+
 int pwrdm_state_switch(struct powerdomain *pwrdm)
 {
 	return _pwrdm_state_switch(pwrdm, PWRDM_STATE_NOW);
diff --git a/arch/arm/plat-omap/include/plat/clockdomain.h b/arch/arm/plat-omap/include/plat/clockdomain.h
index ba0a6c0..ecf7f88 100644
--- a/arch/arm/plat-omap/include/plat/clockdomain.h
+++ b/arch/arm/plat-omap/include/plat/clockdomain.h
@@ -30,6 +30,12 @@
 #define CLKDM_CAN_SWSUP		(CLKDM_CAN_FORCE_SLEEP | CLKDM_CAN_FORCE_WAKEUP)
 #define CLKDM_CAN_HWSUP_SWSUP	(CLKDM_CAN_SWSUP | CLKDM_CAN_HWSUP)
 
+/*
+ * Maximum number of FCLK register masks that can be associated with a
+ * clockdomain. CORE powerdomain on OMAP3 is the worst case
+ */
+#define CLKDM_MAX_CLK_REGS			3
+
 /* OMAP24XX CM_CLKSTCTRL_*.AUTOSTATE_* register bit values */
 #define OMAP24XX_CLKSTCTRL_DISABLE_AUTO		0x0
 #define OMAP24XX_CLKSTCTRL_ENABLE_AUTO		0x1
@@ -82,6 +88,11 @@ struct clkdm_dep {
 	const struct omap_chip_id omap_chip;
 };
 
+struct clkdm_idle_def {
+	u32 fclk_ignore;
+	u32 idlest_mask;
+};
+
 /**
  * struct clockdomain - OMAP clockdomain
  * @name: clockdomain name
@@ -95,6 +106,8 @@ struct clkdm_dep {
  * @omap_chip: OMAP chip types that this clockdomain is valid on
  * @usecount: Usecount tracking
  * @node: list_head to link all clockdomains together
+ * @clk_reg_num: Number of idle definitions for clockdomain idle status checks
+ * @idle_def: Declarations for idle checks for clockdomain
  */
 struct clockdomain {
 	const char *name;
@@ -111,6 +124,8 @@ struct clockdomain {
 	const struct omap_chip_id omap_chip;
 	atomic_t usecount;
 	struct list_head node;
+	u8 clk_reg_num;
+	struct clkdm_idle_def idle_def[CLKDM_MAX_CLK_REGS];
 };
 
 void clkdm_init(struct clockdomain **clkdms, struct clkdm_autodep *autodeps);
@@ -138,4 +153,6 @@ int omap2_clkdm_sleep(struct clockdomain *clkdm);
 int omap2_clkdm_clk_enable(struct clockdomain *clkdm, struct clk *clk);
 int omap2_clkdm_clk_disable(struct clockdomain *clkdm, struct clk *clk);
 
+int omap2_clkdm_can_idle(struct clockdomain *clkdm);
+
 #endif
diff --git a/arch/arm/plat-omap/include/plat/powerdomain.h b/arch/arm/plat-omap/include/plat/powerdomain.h
index e15c7e9..a1ecd47 100644
--- a/arch/arm/plat-omap/include/plat/powerdomain.h
+++ b/arch/arm/plat-omap/include/plat/powerdomain.h
@@ -145,6 +145,7 @@ int pwrdm_disable_hdwr_sar(struct powerdomain *pwrdm);
 bool pwrdm_has_hdwr_sar(struct powerdomain *pwrdm);
 
 int pwrdm_wait_transition(struct powerdomain *pwrdm);
+int pwrdm_can_idle(struct powerdomain *pwrdm);
 
 int pwrdm_state_switch(struct powerdomain *pwrdm);
 int pwrdm_clkdm_state_switch(struct clockdomain *clkdm);
-- 
1.5.4.3


  reply	other threads:[~2010-03-12 13:54 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-03-12 15:39 [PATCHv7 1/7] OMAP3: PM: Added support functions for omap3 pwrdm handling Tero Kristo
2010-03-12 15:39 ` [PATCHv7 2/7] OMAP3: PM: Added support for INACTIVE and ON states in omap_sram_idle Tero Kristo
2010-03-12 15:39   ` [PATCHv7 3/7] OMAP3: CPUidle: Fixed support for ON / INACTIVE states Tero Kristo
2010-03-12 15:39     ` [PATCHv7 4/7] OMAP3: Clock: Added IDLEST definitions for SGX Tero Kristo
2010-03-12 15:39       ` Tero Kristo [this message]
2010-03-12 15:39         ` [PATCHv7 6/7] OMAP3: PM: Moved pwrdm state control logic from omap_sram_idle to cpuidle Tero Kristo
2010-03-12 15:39           ` [PATCHv7 7/7] OMAP3: PM: Added support for suspending to INACTIVE state Tero Kristo
2010-03-18 22:54       ` [PATCHv7 4/7] OMAP3: Clock: Added IDLEST definitions for SGX Kevin Hilman
2010-03-18 22:55 ` [PATCHv7 1/7] OMAP3: PM: Added support functions for omap3 pwrdm handling Kevin Hilman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1268408357-15621-5-git-send-email-tero.kristo@nokia.com \
    --to=tero.kristo@nokia.com \
    --cc=linux-omap@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.