All of lore.kernel.org
 help / color / mirror / Atom feed
From: Adam Jackson <ajax@redhat.com>
To: intel-gfx@lists.freedesktop.org
Subject: [PATCH] drm/i915/gen4: Fix interrupt setup ordering
Date: Thu, 27 May 2010 17:26:45 -0400	[thread overview]
Message-ID: <1274995605-4035-1-git-send-email-ajax@redhat.com> (raw)

Unmask, then enable interrupts, then enable interrupt sources; matches
PCH ordering.  The old way (sources, enable, unmask) gives a window
during which interrupt conditions would appear in ISR but would never
reach IIR and thus never raise an IRQ.  Since interrupts only trigger
on rising edges in ISR, this would lead to conditions where (for
example) output hotplugging would never fire an interrupt because it
was already stuck on in ISR.

Also, since we know IIR and PIPExSTAT have been cleared during
irq_preinstall, don't clear them again during irq_postinstall, nothing
good can come of that.

Signed-off-by: Adam Jackson <ajax@redhat.com>
---
 drivers/gpu/drm/i915/i915_irq.c |   50 ++++++++++++++++++---------------------
 1 files changed, 23 insertions(+), 27 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index a7e4b1f..f9d2cc0 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -1402,29 +1402,10 @@ int i915_driver_irq_postinstall(struct drm_device *dev)
 	dev_priv->pipestat[1] = 0;
 
 	if (I915_HAS_HOTPLUG(dev)) {
-		u32 hotplug_en = I915_READ(PORT_HOTPLUG_EN);
-
-		/* Note HDMI and DP share bits */
-		if (dev_priv->hotplug_supported_mask & HDMIB_HOTPLUG_INT_STATUS)
-			hotplug_en |= HDMIB_HOTPLUG_INT_EN;
-		if (dev_priv->hotplug_supported_mask & HDMIC_HOTPLUG_INT_STATUS)
-			hotplug_en |= HDMIC_HOTPLUG_INT_EN;
-		if (dev_priv->hotplug_supported_mask & HDMID_HOTPLUG_INT_STATUS)
-			hotplug_en |= HDMID_HOTPLUG_INT_EN;
-		if (dev_priv->hotplug_supported_mask & SDVOC_HOTPLUG_INT_STATUS)
-			hotplug_en |= SDVOC_HOTPLUG_INT_EN;
-		if (dev_priv->hotplug_supported_mask & SDVOB_HOTPLUG_INT_STATUS)
-			hotplug_en |= SDVOB_HOTPLUG_INT_EN;
-		if (dev_priv->hotplug_supported_mask & CRT_HOTPLUG_INT_STATUS)
-			hotplug_en |= CRT_HOTPLUG_INT_EN;
-		/* Ignore TV since it's buggy */
-
-		I915_WRITE(PORT_HOTPLUG_EN, hotplug_en);
-
 		/* Enable in IER... */
 		enable_mask |= I915_DISPLAY_PORT_INTERRUPT;
 		/* and unmask in IMR */
-		i915_enable_irq(dev_priv, I915_DISPLAY_PORT_INTERRUPT);
+		dev_priv->irq_mask_reg &= ~I915_DISPLAY_PORT_INTERRUPT;
 	}
 
 	/*
@@ -1442,16 +1423,31 @@ int i915_driver_irq_postinstall(struct drm_device *dev)
 	}
 	I915_WRITE(EMR, error_mask);
 
-	/* Disable pipe interrupt enables, clear pending pipe status */
-	I915_WRITE(PIPEASTAT, I915_READ(PIPEASTAT) & 0x8000ffff);
-	I915_WRITE(PIPEBSTAT, I915_READ(PIPEBSTAT) & 0x8000ffff);
-	/* Clear pending interrupt status */
-	I915_WRITE(IIR, I915_READ(IIR));
-
-	I915_WRITE(IER, enable_mask);
 	I915_WRITE(IMR, dev_priv->irq_mask_reg);
+	I915_WRITE(IER, enable_mask);
 	(void) I915_READ(IER);
 
+	if (I915_HAS_HOTPLUG(dev)) {
+		u32 hotplug_en = I915_READ(PORT_HOTPLUG_EN);
+
+		/* Note HDMI and DP share bits */
+		if (dev_priv->hotplug_supported_mask & HDMIB_HOTPLUG_INT_STATUS)
+			hotplug_en |= HDMIB_HOTPLUG_INT_EN;
+		if (dev_priv->hotplug_supported_mask & HDMIC_HOTPLUG_INT_STATUS)
+			hotplug_en |= HDMIC_HOTPLUG_INT_EN;
+		if (dev_priv->hotplug_supported_mask & HDMID_HOTPLUG_INT_STATUS)
+			hotplug_en |= HDMID_HOTPLUG_INT_EN;
+		if (dev_priv->hotplug_supported_mask & SDVOC_HOTPLUG_INT_STATUS)
+			hotplug_en |= SDVOC_HOTPLUG_INT_EN;
+		if (dev_priv->hotplug_supported_mask & SDVOB_HOTPLUG_INT_STATUS)
+			hotplug_en |= SDVOB_HOTPLUG_INT_EN;
+		if (dev_priv->hotplug_supported_mask & CRT_HOTPLUG_INT_STATUS)
+			hotplug_en |= CRT_HOTPLUG_INT_EN;
+		/* Ignore TV since it's buggy */
+
+		I915_WRITE(PORT_HOTPLUG_EN, hotplug_en);
+	}
+
 	opregion_enable_asle(dev);
 
 	return 0;
-- 
1.7.0.1

             reply	other threads:[~2010-05-27 21:26 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-05-27 21:26 Adam Jackson [this message]
2010-06-03 21:31 ` [PATCH] drm/i915/gen4: Fix interrupt setup ordering Adam Jackson
2010-06-04 18:01   ` Eric Anholt

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1274995605-4035-1-git-send-email-ajax@redhat.com \
    --to=ajax@redhat.com \
    --cc=intel-gfx@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.